Adrian Chadd 2524554832 Don't log anything if npkts == 0. ... This occurs at RX DMA start, even though the RX FIFO has plenty of space. I'll go figure out why, but this shouldn't cause people to be spammed by these messages.		2013-06-29 19:57:57 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Add a HAL local routine to map the 2GHz channel frequency to an IEEE	2013-06-26 04:46:03 +00:00
ath_rate	I give up - just throw the EWMA update into the normal update_stats()	2013-02-27 04:33:06 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Extend the AHB code to work on chips besides the AR9130.	2013-06-26 04:58:25 +00:00
if_ath_alq.c	Support sending ATH_ALQ messages with no payload.	2013-05-13 21:17:27 +00:00
if_ath_alq.h	Add ALQ beacon debugging.	2013-05-13 21:18:00 +00:00
if_ath_beacon.c	Be (very) careful about how to add more TX DMA work.	2013-05-18 18:27:53 +00:00
if_ath_beacon.h	Overhaul the TXQ locking (again!) as part of some beacon/cabq timing	2013-03-24 00:03:12 +00:00
if_ath_btcoex.c	Add in an initial WB225 (AR9485 + AR3012 BT) combo profile.	2013-06-14 08:18:17 +00:00
if_ath_btcoex.h	Bring over the initial static bluetooth coexistence configuration	2013-06-07 09:02:02 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_lna_div.c	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_lna_div.h	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_misc.h	Migrate ath(4) to now use if_transmit instead of the legacy if_start	2013-05-26 22:23:39 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx_edma.c	Don't log anything if npkts == 0.	2013-06-29 19:57:57 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00
if_ath_rx.h	Fix the busdma logic to work with EDMA chipsets when using bounce	2013-04-04 08:21:56 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Enable the use of TDMA on an 802.11n channel (with aggregation disabled,	2013-05-21 18:02:54 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	Make sure the holding descriptor and link pointer are both freed during	2013-05-10 10:06:45 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx.c	Shuffle around the cleanup unpause calls a bit.	2013-05-29 01:40:13 +00:00
if_ath_tx.h	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath.c	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_athrate.h	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_athvar.h	Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.	2013-06-12 14:52:57 +00:00