freebsd-skq/sys/dev/ppbus/pps.c
John Baldwin 2067d312d4 Add locking to ppc and ppbus and mark the whole lot MPSAFE:
- To avoid having a bunch of locks that end up always getting acquired as
  a group, give each ppc(4) device a mutex which it shares with all the
  child devices including ppbus(4), lpt(4), plip(4), etc.  This mutex
  is then used for all the locking.
- Rework the interrupt handling stuff yet again.  Now ppbus drivers setup
  their interrupt handler during attach and tear it down during detach
  like most other drivers.  ppbus(4) only invokes the interrupt handler
  of the device that currently owns the bus (if any) when an interrupt
  occurs, however.  Also, interrupt handlers in general now accept their
  softc pointers as their argument rather than the device_t.  Another
  feature of the ppbus interrupt handlers is that they are called with
  the parent ppc device's lock already held.  This minimizes the number
  of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
  - Add a mutex to protect the global tables in plip(4) and free them on
    module unload.
  - Add a detach routine.
  - Split out the init/stop code from the ioctl routine into separate
    functions.
- Other lpt(4) changes:
  - Use device_printf().
  - Use a dedicated callout for the lptout timer.
  - Allocate the I/O buffers at attach and detach rather than during
    open and close as this simplifies the locking at the cost of
    1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
  - Use an sx lock to serialize open and close.
  - Remove unused HADBUS flag.
  - Add a detach routine.
  - Use a malloc'd buffer for each read and write to avoid races with
    concurrent read/write.
- Other pps(4) changes:
  - Use a callout rather than a callout handle with timeout().
  - Conform to the new ppbus requirements (regular mutex, non-filter
    interrupt handler).  pps(4) is probably going to have to become a
    standalone driver that doesn't use ppbus(4) to satisfy it's
    requirements for low latency as a result.
  - Use an sx lock to serialize open and close.
- Other vpo(4) changes:
  - Use the parent ppc device's lock to create the CAM sim instead of
    Giant.
- Other ppc(4) changes:
  - Fix ppc_isa's detach method to detach instead of calling attach.

Tested by:	  no one :-(
2009-01-21 23:10:06 +00:00

345 lines
7.9 KiB
C

/*-
* ----------------------------------------------------------------------------
* "THE BEER-WARE LICENSE" (Revision 42):
* <phk@FreeBSD.org> wrote this file. As long as you retain this notice you
* can do whatever you want with this stuff. If we meet some day, and you think
* this stuff is worth it, you can buy me a beer in return. Poul-Henning Kamp
* ----------------------------------------------------------------------------
*
*
* This driver implements a draft-mogul-pps-api-02.txt PPS source.
*
* The input pin is pin#10
* The echo output pin is pin#14
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/sx.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/timepps.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <dev/ppbus/ppbconf.h>
#include "ppbus_if.h"
#include <dev/ppbus/ppbio.h>
#define PPS_NAME "pps" /* our official name */
#define PRVERBOSE(fmt, arg...) if (bootverbose) printf(fmt, ##arg);
struct pps_data {
struct ppb_device pps_dev;
struct pps_state pps[9];
struct cdev *devs[9];
device_t ppsdev;
device_t ppbus;
int busy;
struct callout timeout;
int lastdata;
struct sx lock;
struct resource *intr_resource; /* interrupt resource */
void *intr_cookie; /* interrupt registration cookie */
};
static void ppsintr(void *arg);
static void ppshcpoll(void *arg);
#define DEVTOSOFTC(dev) \
((struct pps_data *)device_get_softc(dev))
static devclass_t pps_devclass;
static d_open_t ppsopen;
static d_close_t ppsclose;
static d_ioctl_t ppsioctl;
static struct cdevsw pps_cdevsw = {
.d_version = D_VERSION,
.d_open = ppsopen,
.d_close = ppsclose,
.d_ioctl = ppsioctl,
.d_name = PPS_NAME,
};
static void
ppsidentify(driver_t *driver, device_t parent)
{
device_t dev;
dev = device_find_child(parent, PPS_NAME, -1);
if (!dev)
BUS_ADD_CHILD(parent, 0, PPS_NAME, -1);
}
static int
ppstry(device_t ppbus, int send, int expect)
{
int i;
ppb_wdtr(ppbus, send);
i = ppb_rdtr(ppbus);
PRVERBOSE("S: %02x E: %02x G: %02x\n", send, expect, i);
return (i != expect);
}
static int
ppsprobe(device_t ppsdev)
{
device_set_desc(ppsdev, "Pulse per second Timing Interface");
return (0);
}
static int
ppsattach(device_t dev)
{
struct pps_data *sc = DEVTOSOFTC(dev);
device_t ppbus = device_get_parent(dev);
struct cdev *d;
int error, i, unit, rid = 0;
/* declare our interrupt handler */
sc->intr_resource = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE);
/* interrupts seem mandatory */
if (sc->intr_resource == NULL) {
device_printf(dev, "Unable to allocate interrupt resource\n");
return (ENXIO);
}
error = bus_setup_intr(dev, sc->intr_resource,
INTR_TYPE_TTY | INTR_MPSAFE, NULL, ppsintr,
sc, &sc->intr_cookie);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->intr_resource);
device_printf(dev, "Unable to register interrupt handler\n");
return (error);
}
sx_init(&sc->lock, "pps");
ppb_init_callout(ppbus, &sc->timeout, 0);
sc->ppsdev = dev;
sc->ppbus = ppbus;
unit = device_get_unit(ppbus);
d = make_dev(&pps_cdevsw, unit,
UID_ROOT, GID_WHEEL, 0600, PPS_NAME "%d", unit);
sc->devs[0] = d;
sc->pps[0].ppscap = PPS_CAPTUREASSERT | PPS_ECHOASSERT;
d->si_drv1 = sc;
d->si_drv2 = (void*)0;
pps_init(&sc->pps[0]);
ppb_lock(ppbus);
if (ppb_request_bus(ppbus, dev, PPB_DONTWAIT)) {
ppb_unlock(ppbus);
return (0);
}
do {
i = ppb_set_mode(sc->ppbus, PPB_EPP);
PRVERBOSE("EPP: %d %d\n", i, PPB_IN_EPP_MODE(sc->ppbus));
if (i == -1)
break;
i = 0;
ppb_wctr(ppbus, i);
if (ppstry(ppbus, 0x00, 0x00))
break;
if (ppstry(ppbus, 0x55, 0x55))
break;
if (ppstry(ppbus, 0xaa, 0xaa))
break;
if (ppstry(ppbus, 0xff, 0xff))
break;
i = IRQENABLE | PCD | STROBE | nINIT | SELECTIN;
ppb_wctr(ppbus, i);
PRVERBOSE("CTR = %02x (%02x)\n", ppb_rctr(ppbus), i);
if (ppstry(ppbus, 0x00, 0x00))
break;
if (ppstry(ppbus, 0x55, 0x00))
break;
if (ppstry(ppbus, 0xaa, 0x00))
break;
if (ppstry(ppbus, 0xff, 0x00))
break;
i = IRQENABLE | PCD | nINIT | SELECTIN;
ppb_wctr(ppbus, i);
PRVERBOSE("CTR = %02x (%02x)\n", ppb_rctr(ppbus), i);
ppstry(ppbus, 0x00, 0xff);
ppstry(ppbus, 0x55, 0xff);
ppstry(ppbus, 0xaa, 0xff);
ppstry(ppbus, 0xff, 0xff);
ppb_unlock(ppbus);
for (i = 1; i < 9; i++) {
d = make_dev(&pps_cdevsw, unit + 0x10000 * i,
UID_ROOT, GID_WHEEL, 0600, PPS_NAME "%db%d", unit, i - 1);
sc->devs[i] = d;
sc->pps[i].ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
d->si_drv1 = sc;
d->si_drv2 = (void *)(intptr_t)i;
pps_init(&sc->pps[i]);
}
ppb_lock(ppbus);
} while (0);
i = ppb_set_mode(sc->ppbus, PPB_COMPATIBLE);
ppb_release_bus(ppbus, dev);
ppb_unlock(ppbus);
return (0);
}
static int
ppsopen(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct pps_data *sc = dev->si_drv1;
device_t ppbus = sc->ppbus;
int subdev = (intptr_t)dev->si_drv2;
int i;
/*
* The sx lock is here solely to serialize open()'s to close
* the race of concurrent open()'s when pps(4) doesn't own the
* ppbus.
*/
sx_xlock(&sc->lock);
ppb_lock(ppbus);
if (!sc->busy) {
device_t ppsdev = sc->ppsdev;
if (ppb_request_bus(ppbus, ppsdev, PPB_WAIT|PPB_INTR)) {
ppb_unlock(ppbus);
sx_xunlock(&sc->lock);
return (EINTR);
}
i = ppb_set_mode(sc->ppbus, PPB_PS2);
PRVERBOSE("EPP: %d %d\n", i, PPB_IN_EPP_MODE(sc->ppbus));
i = IRQENABLE | PCD | nINIT | SELECTIN;
ppb_wctr(ppbus, i);
}
if (subdev > 0 && !(sc->busy & ~1)) {
/* XXX: Timeout of 1? hz/100 instead perhaps? */
callout_reset(&sc->timeout, 1, ppshcpoll, sc);
sc->lastdata = ppb_rdtr(sc->ppbus);
}
sc->busy |= (1 << subdev);
ppb_unlock(ppbus);
sx_xunlock(&sc->lock);
return(0);
}
static int
ppsclose(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct pps_data *sc = dev->si_drv1;
int subdev = (intptr_t)dev->si_drv2;
sx_xlock(&sc->lock);
sc->pps[subdev].ppsparam.mode = 0; /* PHK ??? */
ppb_lock(sc->ppbus);
sc->busy &= ~(1 << subdev);
if (subdev > 0 && !(sc->busy & ~1))
callout_stop(&sc->timeout);
if (!sc->busy) {
device_t ppsdev = sc->ppsdev;
device_t ppbus = sc->ppbus;
ppb_wdtr(ppbus, 0);
ppb_wctr(ppbus, 0);
ppb_set_mode(ppbus, PPB_COMPATIBLE);
ppb_release_bus(ppbus, ppsdev);
}
ppb_unlock(sc->ppbus);
sx_xunlock(&sc->lock);
return(0);
}
static void
ppshcpoll(void *arg)
{
struct pps_data *sc = arg;
int i, j, k, l;
KASSERT(sc->busy & ~1, ("pps polling w/o opened devices"));
i = ppb_rdtr(sc->ppbus);
if (i == sc->lastdata)
return;
l = sc->lastdata ^ i;
k = 1;
for (j = 1; j < 9; j ++) {
if (l & k) {
pps_capture(&sc->pps[j]);
pps_event(&sc->pps[j],
i & k ? PPS_CAPTUREASSERT : PPS_CAPTURECLEAR);
}
k += k;
}
sc->lastdata = i;
callout_reset(&sc->timeout, 1, ppshcpoll, sc);
}
static void
ppsintr(void *arg)
{
struct pps_data *sc = (struct pps_data *)arg;
ppb_assert_locked(sc->ppbus);
pps_capture(&sc->pps[0]);
if (!(ppb_rstr(sc->ppbus) & nACK))
return;
if (sc->pps[0].ppsparam.mode & PPS_ECHOASSERT)
ppb_wctr(sc->ppbus, IRQENABLE | AUTOFEED);
pps_event(&sc->pps[0], PPS_CAPTUREASSERT);
if (sc->pps[0].ppsparam.mode & PPS_ECHOASSERT)
ppb_wctr(sc->ppbus, IRQENABLE);
}
static int
ppsioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags, struct thread *td)
{
struct pps_data *sc = dev->si_drv1;
int subdev = (intptr_t)dev->si_drv2;
int err;
ppb_lock(sc->ppbus);
err = pps_ioctl(cmd, data, &sc->pps[subdev]);
ppb_unlock(sc->ppbus);
return (err);
}
static device_method_t pps_methods[] = {
/* device interface */
DEVMETHOD(device_identify, ppsidentify),
DEVMETHOD(device_probe, ppsprobe),
DEVMETHOD(device_attach, ppsattach),
{ 0, 0 }
};
static driver_t pps_driver = {
PPS_NAME,
pps_methods,
sizeof(struct pps_data),
};
DRIVER_MODULE(pps, ppbus, pps_driver, pps_devclass, 0, 0);
MODULE_DEPEND(pps, ppbus, 1, 1, 1);