405ada37fb
This is needed with the pl011 driver. Before this change it would default to a shift of 0, however the hardware places the registers at 4-byte addresses meaning the value should be 2. This patch fixes this for the pl011 when configured using the fdt. The other drivers have a default value of 0 to keep this a no-op. MFC after: 1 week
506 lines
12 KiB
C
506 lines
12 KiB
C
/*-
|
|
* Copyright (c) 2012 Semihalf.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/uart/uart.h>
|
|
#include <dev/uart/uart_cpu.h>
|
|
#include <dev/uart/uart_cpu_fdt.h>
|
|
#include <dev/uart/uart_bus.h>
|
|
#include "uart_if.h"
|
|
|
|
#include <sys/kdb.h>
|
|
|
|
/* PL011 UART registers and masks*/
|
|
#define UART_DR 0x00 /* Data register */
|
|
#define DR_FE (1 << 8) /* Framing error */
|
|
#define DR_PE (1 << 9) /* Parity error */
|
|
#define DR_BE (1 << 10) /* Break error */
|
|
#define DR_OE (1 << 11) /* Overrun error */
|
|
|
|
#define UART_FR 0x06 /* Flag register */
|
|
#define FR_TXFF (1 << 5) /* Transmit FIFO/reg full */
|
|
#define FR_RXFF (1 << 6) /* Receive FIFO/reg full */
|
|
#define FR_TXFE (1 << 7) /* Transmit FIFO/reg empty */
|
|
|
|
#define UART_IBRD 0x09 /* Integer baud rate register */
|
|
#define IBRD_BDIVINT 0xffff /* Significant part of int. divisor value */
|
|
|
|
#define UART_FBRD 0x0a /* Fractional baud rate register */
|
|
#define FBRD_BDIVFRAC 0x3f /* Significant part of frac. divisor value */
|
|
|
|
#define UART_LCR_H 0x0b /* Line control register */
|
|
#define LCR_H_WLEN8 (0x3 << 5)
|
|
#define LCR_H_WLEN7 (0x2 << 5)
|
|
#define LCR_H_WLEN6 (0x1 << 5)
|
|
#define LCR_H_FEN (1 << 4) /* FIFO mode enable */
|
|
#define LCR_H_STP2 (1 << 3) /* 2 stop frames at the end */
|
|
#define LCR_H_EPS (1 << 2) /* Even parity select */
|
|
#define LCR_H_PEN (1 << 1) /* Parity enable */
|
|
|
|
#define UART_CR 0x0c /* Control register */
|
|
#define CR_RXE (1 << 9) /* Receive enable */
|
|
#define CR_TXE (1 << 8) /* Transmit enable */
|
|
#define CR_UARTEN (1 << 0) /* UART enable */
|
|
|
|
#define UART_IMSC 0x0e /* Interrupt mask set/clear register */
|
|
#define IMSC_MASK_ALL 0x7ff /* Mask all interrupts */
|
|
|
|
#define UART_RIS 0x0f /* Raw interrupt status register */
|
|
#define UART_RXREADY (1 << 4) /* RX buffer full */
|
|
#define UART_TXEMPTY (1 << 5) /* TX buffer empty */
|
|
#define RIS_RTIM (1 << 6) /* Receive timeout */
|
|
#define RIS_FE (1 << 7) /* Framing error interrupt status */
|
|
#define RIS_PE (1 << 8) /* Parity error interrupt status */
|
|
#define RIS_BE (1 << 9) /* Break error interrupt status */
|
|
#define RIS_OE (1 << 10) /* Overrun interrupt status */
|
|
|
|
#define UART_MIS 0x10 /* Masked interrupt status register */
|
|
#define UART_ICR 0x11 /* Interrupt clear register */
|
|
|
|
/*
|
|
* FIXME: actual register size is SoC-dependent, we need to handle it
|
|
*/
|
|
#define __uart_getreg(bas, reg) \
|
|
bus_space_read_4((bas)->bst, (bas)->bsh, uart_regofs(bas, reg))
|
|
#define __uart_setreg(bas, reg, value) \
|
|
bus_space_write_4((bas)->bst, (bas)->bsh, uart_regofs(bas, reg), value)
|
|
|
|
/*
|
|
* Low-level UART interface.
|
|
*/
|
|
static int uart_pl011_probe(struct uart_bas *bas);
|
|
static void uart_pl011_init(struct uart_bas *bas, int, int, int, int);
|
|
static void uart_pl011_term(struct uart_bas *bas);
|
|
static void uart_pl011_putc(struct uart_bas *bas, int);
|
|
static int uart_pl011_rxready(struct uart_bas *bas);
|
|
static int uart_pl011_getc(struct uart_bas *bas, struct mtx *);
|
|
|
|
static struct uart_ops uart_pl011_ops = {
|
|
.probe = uart_pl011_probe,
|
|
.init = uart_pl011_init,
|
|
.term = uart_pl011_term,
|
|
.putc = uart_pl011_putc,
|
|
.rxready = uart_pl011_rxready,
|
|
.getc = uart_pl011_getc,
|
|
};
|
|
|
|
static int
|
|
uart_pl011_probe(struct uart_bas *bas)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
uart_pl011_param(struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
uint32_t ctrl, line;
|
|
uint32_t baud;
|
|
|
|
/*
|
|
* Zero all settings to make sure
|
|
* UART is disabled and not configured
|
|
*/
|
|
ctrl = line = 0x0;
|
|
__uart_setreg(bas, UART_CR, ctrl);
|
|
|
|
/* As we know UART is disabled we may setup the line */
|
|
switch (databits) {
|
|
case 7:
|
|
line |= LCR_H_WLEN7;
|
|
break;
|
|
case 6:
|
|
line |= LCR_H_WLEN6;
|
|
break;
|
|
case 8:
|
|
default:
|
|
line |= LCR_H_WLEN8;
|
|
break;
|
|
}
|
|
|
|
if (stopbits == 2)
|
|
line |= LCR_H_STP2;
|
|
else
|
|
line &= ~LCR_H_STP2;
|
|
|
|
if (parity)
|
|
line |= LCR_H_PEN;
|
|
else
|
|
line &= ~LCR_H_PEN;
|
|
|
|
/* Configure the rest */
|
|
line &= ~LCR_H_FEN;
|
|
ctrl |= (CR_RXE | CR_TXE | CR_UARTEN);
|
|
|
|
if (bas->rclk != 0 && baudrate != 0) {
|
|
baud = bas->rclk * 4 / baudrate;
|
|
__uart_setreg(bas, UART_IBRD, ((uint32_t)(baud >> 6)) & IBRD_BDIVINT);
|
|
__uart_setreg(bas, UART_FBRD, (uint32_t)(baud & 0x3F) & FBRD_BDIVFRAC);
|
|
}
|
|
|
|
/* Add config. to line before reenabling UART */
|
|
__uart_setreg(bas, UART_LCR_H, (__uart_getreg(bas, UART_LCR_H) &
|
|
~0xff) | line);
|
|
|
|
__uart_setreg(bas, UART_CR, ctrl);
|
|
}
|
|
|
|
static void
|
|
uart_pl011_init(struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
/* Mask all interrupts */
|
|
__uart_setreg(bas, UART_IMSC, __uart_getreg(bas, UART_IMSC) &
|
|
~IMSC_MASK_ALL);
|
|
|
|
uart_pl011_param(bas, baudrate, databits, stopbits, parity);
|
|
}
|
|
|
|
static void
|
|
uart_pl011_term(struct uart_bas *bas)
|
|
{
|
|
}
|
|
|
|
static void
|
|
uart_pl011_putc(struct uart_bas *bas, int c)
|
|
{
|
|
|
|
/* Wait when TX FIFO full. Push character otherwise. */
|
|
while (__uart_getreg(bas, UART_FR) & FR_TXFF)
|
|
;
|
|
__uart_setreg(bas, UART_DR, c & 0xff);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_rxready(struct uart_bas *bas)
|
|
{
|
|
|
|
return (__uart_getreg(bas, UART_FR) & FR_RXFF);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_getc(struct uart_bas *bas, struct mtx *hwmtx)
|
|
{
|
|
int c;
|
|
|
|
while (!uart_pl011_rxready(bas))
|
|
;
|
|
c = __uart_getreg(bas, UART_DR) & 0xff;
|
|
|
|
return (c);
|
|
}
|
|
|
|
/*
|
|
* High-level UART interface.
|
|
*/
|
|
struct uart_pl011_softc {
|
|
struct uart_softc base;
|
|
uint8_t fcr;
|
|
uint8_t ier;
|
|
uint8_t mcr;
|
|
|
|
uint8_t ier_mask;
|
|
uint8_t ier_rxbits;
|
|
};
|
|
|
|
static int uart_pl011_bus_attach(struct uart_softc *);
|
|
static int uart_pl011_bus_detach(struct uart_softc *);
|
|
static int uart_pl011_bus_flush(struct uart_softc *, int);
|
|
static int uart_pl011_bus_getsig(struct uart_softc *);
|
|
static int uart_pl011_bus_ioctl(struct uart_softc *, int, intptr_t);
|
|
static int uart_pl011_bus_ipend(struct uart_softc *);
|
|
static int uart_pl011_bus_param(struct uart_softc *, int, int, int, int);
|
|
static int uart_pl011_bus_probe(struct uart_softc *);
|
|
static int uart_pl011_bus_receive(struct uart_softc *);
|
|
static int uart_pl011_bus_setsig(struct uart_softc *, int);
|
|
static int uart_pl011_bus_transmit(struct uart_softc *);
|
|
static void uart_pl011_bus_grab(struct uart_softc *);
|
|
static void uart_pl011_bus_ungrab(struct uart_softc *);
|
|
|
|
static kobj_method_t uart_pl011_methods[] = {
|
|
KOBJMETHOD(uart_attach, uart_pl011_bus_attach),
|
|
KOBJMETHOD(uart_detach, uart_pl011_bus_detach),
|
|
KOBJMETHOD(uart_flush, uart_pl011_bus_flush),
|
|
KOBJMETHOD(uart_getsig, uart_pl011_bus_getsig),
|
|
KOBJMETHOD(uart_ioctl, uart_pl011_bus_ioctl),
|
|
KOBJMETHOD(uart_ipend, uart_pl011_bus_ipend),
|
|
KOBJMETHOD(uart_param, uart_pl011_bus_param),
|
|
KOBJMETHOD(uart_probe, uart_pl011_bus_probe),
|
|
KOBJMETHOD(uart_receive, uart_pl011_bus_receive),
|
|
KOBJMETHOD(uart_setsig, uart_pl011_bus_setsig),
|
|
KOBJMETHOD(uart_transmit, uart_pl011_bus_transmit),
|
|
KOBJMETHOD(uart_grab, uart_pl011_bus_grab),
|
|
KOBJMETHOD(uart_ungrab, uart_pl011_bus_ungrab),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static struct uart_class uart_pl011_class = {
|
|
"uart_pl011",
|
|
uart_pl011_methods,
|
|
sizeof(struct uart_pl011_softc),
|
|
.uc_ops = &uart_pl011_ops,
|
|
.uc_range = 0x48,
|
|
.uc_rclk = 0,
|
|
.uc_rshift = 2
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{"arm,pl011", (uintptr_t)&uart_pl011_class},
|
|
{NULL, (uintptr_t)NULL},
|
|
};
|
|
UART_FDT_CLASS_AND_DEVICE(compat_data);
|
|
|
|
static int
|
|
uart_pl011_bus_attach(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int reg;
|
|
|
|
bas = &sc->sc_bas;
|
|
|
|
/* Enable interrupts */
|
|
reg = (UART_RXREADY | RIS_RTIM | UART_TXEMPTY);
|
|
__uart_setreg(bas, UART_IMSC, reg);
|
|
|
|
/* Clear interrupts */
|
|
__uart_setreg(bas, UART_ICR, IMSC_MASK_ALL);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_detach(struct uart_softc *sc)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_flush(struct uart_softc *sc, int what)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_getsig(struct uart_softc *sc)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
|
|
{
|
|
struct uart_bas *bas;
|
|
int error;
|
|
|
|
bas = &sc->sc_bas;
|
|
error = 0;
|
|
uart_lock(sc->sc_hwmtx);
|
|
switch (request) {
|
|
case UART_IOCTL_BREAK:
|
|
break;
|
|
case UART_IOCTL_BAUD:
|
|
*(int*)data = 115200;
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_ipend(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
uint32_t ints;
|
|
int ipend;
|
|
int reg;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
ints = __uart_getreg(bas, UART_MIS);
|
|
ipend = 0;
|
|
|
|
if (ints & (UART_RXREADY | RIS_RTIM))
|
|
ipend |= SER_INT_RXREADY;
|
|
if (ints & RIS_BE)
|
|
ipend |= SER_INT_BREAK;
|
|
if (ints & RIS_OE)
|
|
ipend |= SER_INT_OVERRUN;
|
|
if (ints & UART_TXEMPTY) {
|
|
if (sc->sc_txbusy)
|
|
ipend |= SER_INT_TXIDLE;
|
|
|
|
/* Disable TX interrupt */
|
|
reg = __uart_getreg(bas, UART_IMSC);
|
|
reg &= ~(UART_TXEMPTY);
|
|
__uart_setreg(bas, UART_IMSC, reg);
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (ipend);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_param(struct uart_softc *sc, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
uart_pl011_param(&sc->sc_bas, baudrate, databits, stopbits, parity);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_probe(struct uart_softc *sc)
|
|
{
|
|
|
|
device_set_desc(sc->sc_dev, "PrimeCell UART (PL011)");
|
|
|
|
sc->sc_rxfifosz = 1;
|
|
sc->sc_txfifosz = 1;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_receive(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
uint32_t ints, xc;
|
|
int rx;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
ints = __uart_getreg(bas, UART_MIS);
|
|
while (ints & (UART_RXREADY | RIS_RTIM)) {
|
|
if (uart_rx_full(sc)) {
|
|
sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
|
|
break;
|
|
}
|
|
xc = __uart_getreg(bas, UART_DR);
|
|
rx = xc & 0xff;
|
|
|
|
if (xc & DR_FE)
|
|
rx |= UART_STAT_FRAMERR;
|
|
if (xc & DR_PE)
|
|
rx |= UART_STAT_PARERR;
|
|
|
|
__uart_setreg(bas, UART_ICR, (UART_RXREADY | RIS_RTIM));
|
|
|
|
uart_rx_put(sc, rx);
|
|
ints = __uart_getreg(bas, UART_MIS);
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_setsig(struct uart_softc *sc, int sig)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uart_pl011_bus_transmit(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int reg;
|
|
int i;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
for (i = 0; i < sc->sc_txdatasz; i++) {
|
|
__uart_setreg(bas, UART_DR, sc->sc_txbuf[i]);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
/* If not empty wait until it is */
|
|
if ((__uart_getreg(bas, UART_FR) & FR_TXFE) != FR_TXFE) {
|
|
sc->sc_txbusy = 1;
|
|
|
|
/* Enable TX interrupt */
|
|
reg = __uart_getreg(bas, UART_IMSC);
|
|
reg |= (UART_TXEMPTY);
|
|
__uart_setreg(bas, UART_IMSC, reg);
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
/* No interrupt expected, schedule the next fifo write */
|
|
if (!sc->sc_txbusy)
|
|
uart_sched_softih(sc, SER_INT_TXIDLE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
uart_pl011_bus_grab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
__uart_setreg(bas, UART_IMSC, /* Switch to RX polling while grabbed */
|
|
~UART_RXREADY & __uart_getreg(bas, UART_IMSC));
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|
|
|
|
static void
|
|
uart_pl011_bus_ungrab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
__uart_setreg(bas, UART_IMSC, /* Switch to RX interrupts while not grabbed */
|
|
UART_RXREADY | __uart_getreg(bas, UART_IMSC));
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|