freebsd-skq/sys/arm/freescale/imx/imx_machdep.c
ian fcfba2aea9 Add support to the imx5/6 watchdog for the external reset signal. Also, if
the "power down" watchdog used by the ROM boot code is still active when the
regular watchdog is activated, turn off the power-down watchdog.

This adds support for the "fsl,ext-reset-output" FDT property.  When
present, that property indicates that a chip reset is accomplished by
asserting the WDOG1_B external signal, which is supposed to trigger some
external component such as a PMIC to ready the hardware for reset (for
example, adjusting voltages from idle to full-power levels), and assert the
POR signal to SoC when ready.  To guard against misconfiguation leading to a
non-rebootable system, the external reset signal is backstopped by code
that asserts a normal internal chip reset if nothing responds to the
external reset signal within one second.
2018-01-26 17:55:17 +00:00

133 lines
4.5 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2013 Ian Lepore <ian@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include "opt_platform.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/reboot.h>
#include <sys/devmap.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/armreg.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/machdep.h>
#include <arm/freescale/imx/imx_machdep.h>
#include <arm/freescale/imx/imx_wdogreg.h>
SYSCTL_NODE(_hw, OID_AUTO, imx, CTLFLAG_RW, NULL, "i.MX container");
static int last_reset_status;
SYSCTL_UINT(_hw_imx, OID_AUTO, last_reset_status, CTLFLAG_RD,
&last_reset_status, 0, "Last reset status register");
SYSCTL_STRING(_hw_imx, OID_AUTO, last_reset_reason, CTLFLAG_RD,
"unknown", 0, "Last reset reason");
/*
* This code which manipulates the watchdog hardware is here to implement
* cpu_reset() because the watchdog is the only way for software to reset the
* chip. Why here and not in imx_wdog.c? Because there's no requirement that
* the watchdog driver be compiled in, but it's nice to be able to reboot even
* if it's not.
*/
void
imx_wdog_cpu_reset(vm_offset_t wdcr_physaddr)
{
volatile uint16_t cr, *pcr;
if ((pcr = devmap_ptov(wdcr_physaddr, sizeof(*pcr))) == NULL) {
printf("imx_wdog_cpu_reset(): "
"cannot find control register... locking up now.");
for (;;)
cpu_spinwait();
}
cr = *pcr;
/*
* If the watchdog hardware has been set up to trigger an external reset
* signal on watchdog timeout, then we do software-requested rebooting
* the same way, by asserting the external reset signal.
*
* Asserting external reset is supposed to result in some external
* component asserting the POR pin on the SoC, possibly after adjusting
* and stabilizing system voltages, or taking other system-wide reset
* actions. Just in case there is some kind of misconfiguration, we
* hang out and do nothing for a full second, then continue on into
* the code to assert a software reset as well.
*/
if (cr & WDOG_CR_WDT) {
cr &= ~WDOG_CR_WDA; /* Assert active-low ext reset bit. */
*pcr = cr;
DELAY(1000000);
printf("imx_wdog_cpu_reset(): "
"External reset failed, trying internal cpu-reset\n");
DELAY(10000); /* Time for printf to appear */
}
/*
* Imx6 erratum ERR004346 says the SRS bit has to be cleared twice
* within the same cycle of the 32khz clock to reliably trigger the
* reset. Writing it 3 times in a row ensures at least 2 of the writes
* happen in the same 32k clock cycle.
*/
cr &= ~WDOG_CR_SRS; /* Assert active-low software reset bit. */
*pcr = cr;
*pcr = cr;
*pcr = cr;
/* Reset happens on the next tick of the 32khz clock, wait for it. */
for (;;)
cpu_spinwait();
}
void
imx_wdog_init_last_reset(vm_offset_t wdsr_phys)
{
volatile uint16_t * psr;
if ((psr = devmap_ptov(wdsr_phys, sizeof(*psr))) == NULL)
return;
last_reset_status = *psr;
if (last_reset_status & WDOG_RSR_SFTW) {
sysctl___hw_imx_last_reset_reason.oid_arg1 = "SoftwareReset";
} else if (last_reset_status & WDOG_RSR_TOUT) {
sysctl___hw_imx_last_reset_reason.oid_arg1 = "WatchdogTimeout";
} else if (last_reset_status & WDOG_RSR_POR) {
sysctl___hw_imx_last_reset_reason.oid_arg1 = "PowerOnReset";
}
}