849 lines
18 KiB
C
849 lines
18 KiB
C
/**************************************************************************
|
||
**
|
||
** $Id: pci.c,v 1.12 1995/02/09 20:20:33 se Exp $
|
||
**
|
||
** General subroutines for the PCI bus on 80*86 systems.
|
||
** pci_configure ()
|
||
**
|
||
** 386bsd / FreeBSD
|
||
**
|
||
**-------------------------------------------------------------------------
|
||
**
|
||
** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved.
|
||
**
|
||
** Redistribution and use in source and binary forms, with or without
|
||
** modification, are permitted provided that the following conditions
|
||
** are met:
|
||
** 1. Redistributions of source code must retain the above copyright
|
||
** notice, this list of conditions and the following disclaimer.
|
||
** 2. Redistributions in binary form must reproduce the above copyright
|
||
** notice, this list of conditions and the following disclaimer in the
|
||
** documentation and/or other materials provided with the distribution.
|
||
** 3. The name of the author may not be used to endorse or promote products
|
||
** derived from this software without specific prior written permission.
|
||
**
|
||
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
**
|
||
***************************************************************************
|
||
*/
|
||
|
||
#include <pci.h>
|
||
#if NPCI > 0
|
||
|
||
#ifndef __FreeBSD2__
|
||
#if __FreeBSD__ >= 2
|
||
#define __FreeBSD2__
|
||
#endif
|
||
#endif
|
||
|
||
/*========================================================
|
||
**
|
||
** #includes and declarations
|
||
**
|
||
**========================================================
|
||
*/
|
||
|
||
#include <sys/param.h>
|
||
#include <sys/systm.h>
|
||
#include <sys/malloc.h>
|
||
#include <sys/errno.h>
|
||
#include <sys/kernel.h>
|
||
|
||
#include <vm/vm.h>
|
||
#include <vm/vm_param.h>
|
||
|
||
#include <pci/pcivar.h>
|
||
#include <pci/pcireg.h>
|
||
#include <pci/pcibus.h>
|
||
|
||
#include <machine/pmap.h>
|
||
#ifdef __FreeBSD2__
|
||
#include <sys/devconf.h>
|
||
|
||
struct pci_devconf {
|
||
struct kern_devconf pdc_kdc;
|
||
struct pci_info pdc_pi;
|
||
};
|
||
|
||
static int
|
||
pci_externalize (struct proc *, struct kern_devconf *, void *, size_t);
|
||
|
||
static int
|
||
pci_internalize (struct proc *, struct kern_devconf *, void *, size_t);
|
||
#else /* __FreeBSD2__ */
|
||
|
||
/*
|
||
** Function prototypes missing in system headers
|
||
*/
|
||
|
||
extern pmap_t pmap_kernel(void);
|
||
static vm_offset_t pmap_mapdev (vm_offset_t paddr, vm_size_t vsize);
|
||
#endif /* __FreeBSD2__ */
|
||
|
||
|
||
/*========================================================
|
||
**
|
||
** Autoconfiguration of pci devices.
|
||
**
|
||
** This is reverse to the isa configuration.
|
||
** (1) find a pci device.
|
||
** (2) look for a driver.
|
||
**
|
||
**========================================================
|
||
*/
|
||
|
||
/*--------------------------------------------------------
|
||
**
|
||
** The pci devices can be mapped to any address.
|
||
** As default we start at the last gigabyte.
|
||
**
|
||
**--------------------------------------------------------
|
||
*/
|
||
|
||
#ifndef PCI_PMEM_START
|
||
#define PCI_PMEM_START 0xc0000000
|
||
#endif
|
||
|
||
static vm_offset_t pci_paddr = PCI_PMEM_START;
|
||
|
||
/*--------------------------------------------------------
|
||
**
|
||
** The pci ports can be mapped to any address.
|
||
** As default we start at 0x400
|
||
**
|
||
**--------------------------------------------------------
|
||
*/
|
||
|
||
#ifndef PCI_PORT_START
|
||
#define PCI_PORT_START 0x0400
|
||
#endif
|
||
|
||
static u_short pci_ioaddr = PCI_PORT_START;
|
||
|
||
/*--------------------------------------------------------
|
||
**
|
||
** The pci device interrupt lines should have been
|
||
** assigned by the bios. But if the bios failed to
|
||
** to it, we set it.
|
||
**
|
||
**--------------------------------------------------------
|
||
*/
|
||
|
||
#ifndef PCI_IRQ
|
||
#define PCI_IRQ 0
|
||
#endif
|
||
|
||
static u_long pci_irq = PCI_IRQ;
|
||
|
||
/*---------------------------------------------------------
|
||
**
|
||
** pci_configure ()
|
||
**
|
||
** Probe all devices on pci bus and attach them.
|
||
**
|
||
** May be called more than once.
|
||
** Any device is attached only once.
|
||
** (Attached devices are remembered in pci_seen.)
|
||
**
|
||
**---------------------------------------------------------
|
||
*/
|
||
|
||
static void not_supported (pcici_t tag, u_long type);
|
||
|
||
static unsigned long pci_seen[NPCI];
|
||
|
||
static int pci_conf_count;
|
||
|
||
void pci_configure()
|
||
{
|
||
u_char device,last_device;
|
||
u_short bus;
|
||
pcici_t tag;
|
||
pcidi_t type;
|
||
u_long data;
|
||
int unit;
|
||
int pci_mechanism;
|
||
int pciint;
|
||
int irq;
|
||
char* name=0;
|
||
vm_offset_t old_addr=pci_paddr;
|
||
u_short old_ioaddr=pci_ioaddr;
|
||
|
||
int dvi;
|
||
struct pci_device *dvp=0;
|
||
|
||
#ifdef __FreeBSD2__
|
||
struct pci_devconf *pdcp;
|
||
#endif
|
||
|
||
/*
|
||
** first check pci bus driver available
|
||
*/
|
||
|
||
if (pcibus_set.ls_length <= 0)
|
||
return;
|
||
|
||
#define pcibus (*((struct pcibus*) pcibus_set.ls_items[0]))
|
||
/*
|
||
** check pci bus present
|
||
*/
|
||
|
||
pci_mechanism = pcibus.pb_mode ();
|
||
if (!pci_mechanism) return;
|
||
last_device = pci_mechanism==1 ? 31 : 15;
|
||
|
||
/*
|
||
** hello world ..
|
||
*/
|
||
|
||
|
||
for (bus=0;bus<NPCI;bus++) {
|
||
#ifndef PCI_QUIET
|
||
printf ("%s%d: scanning device 0..%d, mechanism=%d.\n",
|
||
pcibus.pb_name, bus, last_device, pci_mechanism);
|
||
#endif
|
||
for (device=0; device<=last_device; device ++) {
|
||
|
||
if (pci_seen[bus] & (1ul << device))
|
||
continue;
|
||
|
||
tag = pcibus.pb_tag (bus, device, 0);
|
||
type = pcibus.pb_read (tag, PCI_ID_REG);
|
||
|
||
if ((!type) || (type==0xfffffffful)) continue;
|
||
|
||
/*
|
||
** lookup device in ioconfiguration:
|
||
*/
|
||
|
||
for (dvi=0; dvi<pcidevice_set.ls_length; dvi++) {
|
||
dvp = (struct pci_device*) pcidevice_set.ls_items[dvi];
|
||
if ((name=(*dvp->pd_probe)(tag, type)))
|
||
break;
|
||
dvp = NULL;
|
||
};
|
||
|
||
if (dvp==NULL) {
|
||
#ifndef PCI_QUIET
|
||
if (pci_conf_count)
|
||
continue;
|
||
printf("%s%d:%d: ", pcibus.pb_name, bus, device);
|
||
not_supported (tag, type);
|
||
#endif
|
||
continue;
|
||
};
|
||
|
||
pci_seen[bus] |= (1ul << device);
|
||
/*
|
||
** Get and increment the unit.
|
||
*/
|
||
|
||
unit = (*dvp->pd_count)++;
|
||
|
||
/*
|
||
** ignore device ?
|
||
*/
|
||
|
||
if (!*name) continue;
|
||
|
||
/*
|
||
** Announce this device
|
||
*/
|
||
|
||
printf ("%s%d <%s>", dvp->pd_name, unit, name);
|
||
|
||
/*
|
||
** Get the int pin number (pci interrupt number a-d)
|
||
** from the pci configuration space.
|
||
*/
|
||
|
||
data = pcibus.pb_read (tag, PCI_INTERRUPT_REG);
|
||
pciint = PCI_INTERRUPT_PIN_EXTRACT(data);
|
||
|
||
if (pciint) {
|
||
|
||
printf (" int %c", 0x60+pciint);
|
||
|
||
/*
|
||
** If the interrupt line register is not set,
|
||
** set it now from PCI_IRQ.
|
||
*/
|
||
|
||
if (!(PCI_INTERRUPT_LINE_EXTRACT(data))) {
|
||
|
||
irq = pci_irq & 0x0f;
|
||
pci_irq >>= 4;
|
||
|
||
data = PCI_INTERRUPT_LINE_INSERT(data, irq);
|
||
printf (" (config)");
|
||
pcibus.pb_write (tag, PCI_INTERRUPT_REG, data);
|
||
};
|
||
|
||
irq = PCI_INTERRUPT_LINE_EXTRACT(data);
|
||
|
||
/*
|
||
** If it's zero, the isa irq number is unknown,
|
||
** and we cannot bind the pci interrupt to isa.
|
||
*/
|
||
|
||
if (irq)
|
||
printf (" irq %d", irq);
|
||
else
|
||
printf (" not bound");
|
||
};
|
||
|
||
/*
|
||
** enable memory access
|
||
*/
|
||
|
||
data = (pcibus.pb_read (tag, PCI_COMMAND_STATUS_REG)
|
||
& 0xffff) | PCI_COMMAND_MEM_ENABLE;
|
||
|
||
pcibus.pb_write (tag, (u_char) PCI_COMMAND_STATUS_REG, data);
|
||
|
||
/*
|
||
** show pci slot.
|
||
*/
|
||
|
||
printf (" on pci%d:%d\n", bus, device);
|
||
|
||
#ifdef __FreeBSD2__
|
||
|
||
/*
|
||
** Allocate a devconf structure
|
||
*/
|
||
|
||
pdcp = (struct pci_devconf *)
|
||
malloc (sizeof (struct pci_devconf),M_DEVBUF,M_WAITOK);
|
||
|
||
/*
|
||
** Fill in.
|
||
**
|
||
** Sorry, this is not yet complete.
|
||
** We should, and eventually will, set the
|
||
** parent pointer to a pci bus devconf structure,
|
||
** and arrange to set the state field dynamically.
|
||
**
|
||
** But I'll go to vacation today, and after all,
|
||
** wasn't there a new feature freeze on Oct 1.?
|
||
*/
|
||
|
||
pdcp -> pdc_pi.pi_bus = bus;
|
||
pdcp -> pdc_pi.pi_device = device;
|
||
|
||
pdcp -> pdc_kdc.kdc_name = dvp->pd_name;
|
||
pdcp -> pdc_kdc.kdc_unit = unit;
|
||
|
||
pdcp -> pdc_kdc.kdc_md.mddc_devtype = MDDT_PCI;
|
||
|
||
pdcp -> pdc_kdc.kdc_externalize = pci_externalize;
|
||
pdcp -> pdc_kdc.kdc_internalize = pci_internalize;
|
||
|
||
pdcp -> pdc_kdc.kdc_datalen = PCI_EXTERNAL_LEN;
|
||
pdcp -> pdc_kdc.kdc_parentdata = &pdcp->pdc_pi;
|
||
pdcp -> pdc_kdc.kdc_state = DC_UNKNOWN;
|
||
pdcp -> pdc_kdc.kdc_description = name;
|
||
|
||
/*
|
||
** And register this device
|
||
*/
|
||
|
||
dev_attach (&pdcp->pdc_kdc);
|
||
|
||
#endif /* __FreeBSD2__ */
|
||
|
||
|
||
/*
|
||
** attach device
|
||
** may produce additional log messages,
|
||
** i.e. when installing subdevices.
|
||
*/
|
||
|
||
(*dvp->pd_attach) (tag, unit);
|
||
};
|
||
};
|
||
|
||
#ifndef PCI_QUIET
|
||
if (pci_paddr != old_addr)
|
||
printf ("pci uses physical addresses from 0x%lx to 0x%lx\n",
|
||
(u_long)PCI_PMEM_START, (u_long)pci_paddr);
|
||
if (pci_ioaddr != old_ioaddr)
|
||
printf ("pci devices use ioports from 0x%x to 0x%x\n",
|
||
(unsigned)PCI_PORT_START, (unsigned)pci_ioaddr);
|
||
#endif
|
||
pci_conf_count++;
|
||
}
|
||
|
||
/*-----------------------------------------------------------------
|
||
**
|
||
** The following functions are provided for the device driver
|
||
** to read/write the configuration space.
|
||
**
|
||
** pci_conf_read():
|
||
** Read a long word from the pci configuration space.
|
||
** Requires a tag (from pcitag) and the register
|
||
** number (should be a long word alligned one).
|
||
**
|
||
** pci_conf_write():
|
||
** Writes a long word to the pci configuration space.
|
||
** Requires a tag (from pcitag), the register number
|
||
** (should be a long word alligned one), and a value.
|
||
**
|
||
**-----------------------------------------------------------------
|
||
*/
|
||
|
||
u_long
|
||
pci_conf_read (pcici_t tag, u_long reg)
|
||
{
|
||
return (pcibus.pb_read (tag, reg));
|
||
}
|
||
|
||
void
|
||
pci_conf_write (pcici_t tag, u_long reg, u_long data)
|
||
{
|
||
pcibus.pb_write (tag, reg, data);
|
||
}
|
||
|
||
/*-----------------------------------------------------------------------
|
||
**
|
||
** Map device into port space.
|
||
**
|
||
** PCI-Specification: 6.2.5.1: address maps
|
||
**
|
||
**-----------------------------------------------------------------------
|
||
*/
|
||
|
||
int pci_map_port (pcici_t tag, u_long reg, u_short* pa)
|
||
{
|
||
u_long data;
|
||
u_short size;
|
||
|
||
/*
|
||
** sanity check
|
||
*/
|
||
|
||
if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) {
|
||
printf ("pci_map_port failed: bad register=0x%x\n",
|
||
(unsigned)reg);
|
||
return (0);
|
||
};
|
||
|
||
/*
|
||
** get size and type of port
|
||
**
|
||
** type is in the lowest two bits.
|
||
** If device requires 2^n bytes, the next
|
||
** n-2 bits are hardwired as 0.
|
||
*/
|
||
|
||
pcibus.pb_write (tag, reg, 0xfffffffful);
|
||
data = pcibus.pb_read (tag, reg);
|
||
|
||
switch (data & 0x03) {
|
||
|
||
case PCI_MAP_IO:
|
||
break;
|
||
|
||
default: /* unknown */
|
||
printf ("pci_map_port failed: bad port type=0x%x\n",
|
||
(unsigned) data);
|
||
return (0);
|
||
};
|
||
|
||
/*
|
||
** get the size
|
||
*/
|
||
|
||
size = -(data & PCI_MAP_IO_ADDRESS_MASK);
|
||
|
||
if (!size) return (0);
|
||
|
||
/*
|
||
** align physical address to virtual size
|
||
*/
|
||
|
||
if ((data = pci_ioaddr % size))
|
||
pci_ioaddr += size - data;
|
||
|
||
#ifndef PCI_QUIET
|
||
/*
|
||
** display values.
|
||
*/
|
||
|
||
printf ("\treg%d: ioaddr=0x%x size=0x%x\n",
|
||
(unsigned) reg, (unsigned) pci_ioaddr, (unsigned) size);
|
||
#endif
|
||
|
||
/*
|
||
** return them to the driver
|
||
*/
|
||
|
||
*pa = pci_ioaddr;
|
||
|
||
/*
|
||
** and don't forget to increment pci_ioaddr
|
||
*/
|
||
|
||
pci_ioaddr += size;
|
||
|
||
return (1);
|
||
}
|
||
|
||
/*-----------------------------------------------------------------------
|
||
**
|
||
** Map device into virtual and physical space
|
||
**
|
||
** PCI-Specification: 6.2.5.1: address maps
|
||
**
|
||
**-----------------------------------------------------------------------
|
||
*/
|
||
|
||
int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa)
|
||
{
|
||
u_long data;
|
||
vm_size_t vsize;
|
||
vm_offset_t vaddr;
|
||
int i;
|
||
|
||
/*
|
||
** sanity check
|
||
*/
|
||
|
||
if (reg < PCI_MAP_REG_START || reg >= PCI_MAP_REG_END || (reg & 3)) {
|
||
printf ("pci_map_mem failed: bad register=0x%x\n",
|
||
(unsigned)reg);
|
||
return (0);
|
||
};
|
||
|
||
/*
|
||
** get size and type of memory
|
||
**
|
||
** type is in the lowest four bits.
|
||
** If device requires 2^n bytes, the next
|
||
** n-4 bits are read as 0.
|
||
*/
|
||
|
||
pcibus.pb_write (tag, reg, 0xfffffffful);
|
||
data = pcibus.pb_read (tag, reg);
|
||
|
||
switch (data & 0x0f) {
|
||
|
||
case PCI_MAP_MEMORY_TYPE_32BIT: /* 32 bit non cachable */
|
||
break;
|
||
|
||
default: /* unknown */
|
||
printf ("pci_map_mem failed: bad memory type=0x%x\n",
|
||
(unsigned) data);
|
||
return (0);
|
||
};
|
||
|
||
/*
|
||
** mask out the type,
|
||
** and round up to a page size
|
||
*/
|
||
|
||
vsize = round_page (-(data & PCI_MAP_MEMORY_ADDRESS_MASK));
|
||
|
||
if (!vsize) return (0);
|
||
|
||
/*
|
||
** align physical address to virtual size
|
||
*/
|
||
|
||
if ((data = pci_paddr % vsize))
|
||
pci_paddr += vsize - data;
|
||
|
||
vaddr = (vm_offset_t) pmap_mapdev (pci_paddr, vsize);
|
||
|
||
|
||
if (!vaddr) return (0);
|
||
|
||
#ifndef PCI_QUIET
|
||
/*
|
||
** display values.
|
||
*/
|
||
|
||
printf ("\treg%d: virtual=0x%lx physical=0x%lx\n",
|
||
(unsigned) reg, (u_long)vaddr, (u_long)pci_paddr);
|
||
#endif
|
||
|
||
/*
|
||
** probe for already mapped device.
|
||
*/
|
||
|
||
for (i=0; i<vsize; i+=4) {
|
||
u_long* addr = (u_long*) (vaddr+i);
|
||
data = *addr;
|
||
if (data != 0xffffffff) {
|
||
printf ("WARNING: possible address conflict "
|
||
"at 0x%08x (read: 0x%08x).\n",
|
||
(unsigned) pci_paddr+i, (unsigned) data);
|
||
break;
|
||
};
|
||
};
|
||
|
||
/*
|
||
** return them to the driver
|
||
*/
|
||
|
||
*va = vaddr;
|
||
*pa = pci_paddr;
|
||
|
||
/*
|
||
** set device address
|
||
*/
|
||
|
||
pcibus.pb_write (tag, reg, pci_paddr);
|
||
|
||
/*
|
||
** and don't forget to increment pci_paddr
|
||
*/
|
||
|
||
pci_paddr += vsize;
|
||
|
||
return (1);
|
||
}
|
||
|
||
/*------------------------------------------------------------
|
||
**
|
||
** Interface functions for the devconf module.
|
||
**
|
||
**------------------------------------------------------------
|
||
*/
|
||
|
||
static int
|
||
pci_externalize (struct proc *p, struct kern_devconf *kdcp, void *u, size_t l)
|
||
{
|
||
struct pci_externalize_buffer buffer;
|
||
struct pci_info * pip = kdcp->kdc_parentdata;
|
||
pcici_t tag;
|
||
int i;
|
||
|
||
if (l < sizeof buffer) {
|
||
return ENOMEM;
|
||
};
|
||
|
||
tag = pcibus.pb_tag (pip->pi_bus, pip->pi_device, 0);
|
||
|
||
buffer.peb_pci_info = *pip;
|
||
|
||
for (i=0; i<PCI_EXT_CONF_LEN; i++) {
|
||
buffer.peb_config[i] = pcibus.pb_read (tag, i*4);
|
||
};
|
||
|
||
return copyout(&buffer, u, sizeof buffer);
|
||
}
|
||
|
||
|
||
static int
|
||
pci_internalize (struct proc *p, struct kern_devconf *kdcp, void *u, size_t s)
|
||
{
|
||
return EOPNOTSUPP;
|
||
}
|
||
|
||
/*-----------------------------------------------------------------------
|
||
**
|
||
** Map pci interrupts to isa interrupts.
|
||
**
|
||
**-----------------------------------------------------------------------
|
||
*/
|
||
|
||
int pci_map_int (pcici_t tag, int(*func)(), void* arg, unsigned* maskptr)
|
||
{
|
||
int irq, result;
|
||
|
||
irq = PCI_INTERRUPT_LINE_EXTRACT(
|
||
pcibus.pb_read (tag, PCI_INTERRUPT_REG));
|
||
|
||
if (irq >= 16 || irq <= 0) {
|
||
printf ("pci_map_int failed: no int line set.\n");
|
||
return (0);
|
||
}
|
||
|
||
result = pcibus.pb_regint (tag, func, arg, maskptr);
|
||
|
||
if (!result) {
|
||
printf ("pci_map_int failed.\n");
|
||
return (0);
|
||
};
|
||
|
||
return (1);
|
||
}
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Display of unknown devices.
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
struct vt {
|
||
u_short ident;
|
||
char* name;
|
||
};
|
||
|
||
static struct vt VendorTable[] = {
|
||
{0x1002, "ATI TECHNOLOGIES INC"},
|
||
{0x1011, "DIGITAL EQUIPMENT CORPORATION"},
|
||
{0x101A, "NCR"},
|
||
{0x102B, "MATROX"},
|
||
{0x1045, "OPTI"},
|
||
{0x5333, "S3 INC."},
|
||
{0x8086, "INTEL CORPORATION"},
|
||
{0,0}
|
||
};
|
||
|
||
static const char *const majclasses[] = {
|
||
"old", "storage", "network", "display",
|
||
"multimedia", "memory", "bridge"
|
||
};
|
||
|
||
void not_supported (pcici_t tag, u_long type)
|
||
{
|
||
u_char reg;
|
||
u_long data;
|
||
struct vt * vp;
|
||
|
||
/*
|
||
** lookup the names.
|
||
*/
|
||
|
||
for (vp=VendorTable; vp->ident; vp++)
|
||
if (vp->ident == (type & 0xffff))
|
||
break;
|
||
|
||
/*
|
||
** and display them.
|
||
*/
|
||
|
||
if (vp->ident) printf (vp->name);
|
||
else printf ("vendor=0x%lx", type & 0xffff);
|
||
|
||
printf (", device=0x%lx", type >> 16);
|
||
|
||
data = (pcibus.pb_read(tag, PCI_CLASS_REG) >> 24) & 0xff;
|
||
if (data < sizeof(majclasses) / sizeof(majclasses[0]))
|
||
printf(", class=%s", majclasses[data]);
|
||
|
||
printf (" [not supported]\n");
|
||
|
||
for (reg=PCI_MAP_REG_START; reg<PCI_MAP_REG_END; reg+=4) {
|
||
data = pcibus.pb_read (tag, reg);
|
||
if (!data) continue;
|
||
switch (data&7) {
|
||
|
||
case 1:
|
||
case 5:
|
||
printf (" map(%x): io(%lx)\n",
|
||
reg, data & ~3);
|
||
break;
|
||
case 0:
|
||
printf (" map(%x): mem32(%lx)\n",
|
||
reg, data & ~7);
|
||
break;
|
||
case 2:
|
||
printf (" map(%x): mem20(%lx)\n",
|
||
reg, data & ~7);
|
||
break;
|
||
case 4:
|
||
printf (" map(%x): mem64(%lx)\n",
|
||
reg, data & ~7);
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
|
||
#ifndef __FreeBSD2__
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Mapping of physical to virtual memory
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
extern vm_map_t kernel_map;
|
||
|
||
static vm_offset_t pmap_mapdev (vm_offset_t paddr, vm_size_t vsize)
|
||
{
|
||
vm_offset_t vaddr,value;
|
||
u_long result;
|
||
|
||
vaddr = vm_map_min (kernel_map);
|
||
|
||
result = vm_map_find (kernel_map, (void*)0, (vm_offset_t) 0,
|
||
&vaddr, vsize, TRUE);
|
||
|
||
if (result != KERN_SUCCESS) {
|
||
printf (" vm_map_find failed(%d)\n", result);
|
||
return (0);
|
||
};
|
||
|
||
/*
|
||
** map physical
|
||
*/
|
||
|
||
value = vaddr;
|
||
while (vsize >= NBPG) {
|
||
pmap_enter (pmap_kernel(), vaddr, paddr,
|
||
VM_PROT_READ|VM_PROT_WRITE, TRUE);
|
||
vaddr += NBPG;
|
||
paddr += NBPG;
|
||
vsize -= NBPG;
|
||
};
|
||
return (value);
|
||
}
|
||
|
||
/*------------------------------------------------------------
|
||
**
|
||
** Emulate the register_intr() function of FreeBSD 2.0
|
||
**
|
||
** requires a patch:
|
||
** FreeBSD 2.0: "/sys/i386/isa/vector.s"
|
||
** 386bsd0.1: "/sys/i386/isa/icu.s"
|
||
** 386bsd1.0: Please ask Jesus Monroy Jr.
|
||
**
|
||
**------------------------------------------------------------
|
||
*/
|
||
|
||
#include <machine/segments.h>
|
||
|
||
int pci_int_unit [16];
|
||
inthand2_t* (pci_int_hdlr [16]);
|
||
unsigned int * pci_int_mptr [16];
|
||
unsigned int pci_int_count[16];
|
||
|
||
extern void
|
||
Vpci3(), Vpci4(), Vpci5(), Vpci6(), Vpci7(), Vpci8(), Vpci9(),
|
||
Vpci10(), Vpci11(), Vpci12(), Vpci13(), Vpci14(), Vpci15();
|
||
|
||
static inthand_t* pci_int_glue[16] = {
|
||
0, 0, 0, Vpci3, Vpci4, Vpci5, Vpci6, Vpci7, Vpci8,
|
||
Vpci9, Vpci10, Vpci11, Vpci12, Vpci13, Vpci14, Vpci15 };
|
||
|
||
static int
|
||
register_intr __P((int intr, int device_id, unsigned int flags,
|
||
inthand2_t *handler, unsigned int* mptr, int unit))
|
||
{
|
||
if (intr >= 16 || intr <= 2)
|
||
return (EINVAL);
|
||
if (pci_int_hdlr [intr])
|
||
return (EBUSY);
|
||
|
||
pci_int_hdlr [intr] = handler;
|
||
pci_int_unit [intr] = unit;
|
||
pci_int_mptr [intr] = mptr;
|
||
|
||
setidt(NRSVIDT + intr, pci_int_glue[intr], SDT_SYS386IGT, SEL_KPL);
|
||
return (0);
|
||
}
|
||
#endif /* __FreeBSD2__ */
|
||
#endif /* NPCI */
|