56c8fde970
promiscuous mode introduced in 1.45, which programs the em card not to strip or prepend tags when in promiscuous mode without also modifying behavior to manually prepend a vlan header in the event that the card isn't doing it on transmit. Due to a feature of card operation, if the global VLAN prepend/strip register isn't set, setting the VLAN tag flag on individual packet descriptors will cause the packet to be transmitted using ISL encapsulation rather than 802.1Q VLAN encapsulation. This fix causes em_encap() to prepend the header by tracking whether the card is configured to temporarily disable prepending/stripping due to promiscuous mode. As a result, entering promiscuous mode on the parent em interface no longer causes vlans to appear to "wedge" or transmit ISL-encapsulated frames, which typically will not be configured/spoken by the other endpoints on the VLAN trunk. This bug may also exist in other drivers, and the additional vlan encapsulation logic should be abstracted and centralized in if_vlan.c if so. RELENG_5_3 candidate. MFC after: 1 week Tested by: pjd, rwatson Reported by: astesin at ukrtelecom dot net Reported by: Mike Tancsa <mike at sentex dot net> Reported by: Iasen Kostov <tbyte at OTEL dot net>
447 lines
15 KiB
C
447 lines
15 KiB
C
/**************************************************************************
|
|
|
|
Copyright (c) 2001-2003, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
/*$FreeBSD$*/
|
|
|
|
#ifndef _EM_H_DEFINED_
|
|
#define _EM_H_DEFINED_
|
|
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/tcp.h>
|
|
#include <netinet/udp.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/clock.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/proc.h>
|
|
#include "opt_bdg.h"
|
|
|
|
#include <dev/em/if_em_hw.h>
|
|
|
|
/* Tunables */
|
|
|
|
/*
|
|
* EM_MAX_TXD: Maximum number of Transmit Descriptors
|
|
* Valid Range: 80-256 for 82542 and 82543-based adapters
|
|
* 80-4096 for others
|
|
* Default Value: 256
|
|
* This value is the number of transmit descriptors allocated by the driver.
|
|
* Increasing this value allows the driver to queue more transmits. Each
|
|
* descriptor is 16 bytes.
|
|
*/
|
|
#define EM_MAX_TXD 256
|
|
|
|
/*
|
|
* EM_MAX_RXD - Maximum number of receive Descriptors
|
|
* Valid Range: 80-256 for 82542 and 82543-based adapters
|
|
* 80-4096 for others
|
|
* Default Value: 256
|
|
* This value is the number of receive descriptors allocated by the driver.
|
|
* Increasing this value allows the driver to buffer more incoming packets.
|
|
* Each descriptor is 16 bytes. A receive buffer is also allocated for each
|
|
* descriptor. The maximum MTU size is 16110.
|
|
*
|
|
*/
|
|
#define EM_MAX_RXD 256
|
|
|
|
/*
|
|
* EM_TIDV - Transmit Interrupt Delay Value
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value delays the generation of transmit interrupts in units of
|
|
* 1.024 microseconds. Transmit interrupt reduction can improve CPU
|
|
* efficiency if properly tuned for specific network traffic. If the
|
|
* system is reporting dropped transmits, this value may be set too high
|
|
* causing the driver to run out of available transmit descriptors.
|
|
*/
|
|
#define EM_TIDV 64
|
|
|
|
/*
|
|
* EM_TADV - Transmit Absolute Interrupt Delay Value (Not valid for 82542/82543/82544)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value, in units of 1.024 microseconds, limits the delay in which a
|
|
* transmit interrupt is generated. Useful only if EM_TIDV is non-zero,
|
|
* this value ensures that an interrupt is generated after the initial
|
|
* packet is sent on the wire within the set amount of time. Proper tuning,
|
|
* along with EM_TIDV, may improve traffic throughput in specific
|
|
* network conditions.
|
|
*/
|
|
#define EM_TADV 64
|
|
|
|
/*
|
|
* EM_RDTR - Receive Interrupt Delay Timer (Packet Timer)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 0
|
|
* This value delays the generation of receive interrupts in units of 1.024
|
|
* microseconds. Receive interrupt reduction can improve CPU efficiency if
|
|
* properly tuned for specific network traffic. Increasing this value adds
|
|
* extra latency to frame reception and can end up decreasing the throughput
|
|
* of TCP traffic. If the system is reporting dropped receives, this value
|
|
* may be set too high, causing the driver to run out of available receive
|
|
* descriptors.
|
|
*
|
|
* CAUTION: When setting EM_RDTR to a value other than 0, adapters
|
|
* may hang (stop transmitting) under certain network conditions.
|
|
* If this occurs a WATCHDOG message is logged in the system event log.
|
|
* In addition, the controller is automatically reset, restoring the
|
|
* network connection. To eliminate the potential for the hang
|
|
* ensure that EM_RDTR is set to 0.
|
|
*/
|
|
#define EM_RDTR 0
|
|
|
|
/*
|
|
* Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value, in units of 1.024 microseconds, limits the delay in which a
|
|
* receive interrupt is generated. Useful only if EM_RDTR is non-zero,
|
|
* this value ensures that an interrupt is generated after the initial
|
|
* packet is received within the set amount of time. Proper tuning,
|
|
* along with EM_RDTR, may improve traffic throughput in specific network
|
|
* conditions.
|
|
*/
|
|
#define EM_RADV 64
|
|
|
|
|
|
/*
|
|
* This parameter controls the maximum no of times the driver will loop
|
|
* in the isr.
|
|
* Minimum Value = 1
|
|
*/
|
|
#define EM_MAX_INTR 3
|
|
|
|
/*
|
|
* Inform the stack about transmit checksum offload capabilities.
|
|
*/
|
|
#define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP)
|
|
|
|
/*
|
|
* This parameter controls the duration of transmit watchdog timer.
|
|
*/
|
|
#define EM_TX_TIMEOUT 5 /* set to 5 seconds */
|
|
|
|
/*
|
|
* This parameter controls when the driver calls the routine to reclaim
|
|
* transmit descriptors.
|
|
*/
|
|
#define EM_TX_CLEANUP_THRESHOLD EM_MAX_TXD / 8
|
|
|
|
/*
|
|
* This parameter controls whether or not autonegotation is enabled.
|
|
* 0 - Disable autonegotiation
|
|
* 1 - Enable autonegotiation
|
|
*/
|
|
#define DO_AUTO_NEG 1
|
|
|
|
/*
|
|
* This parameter control whether or not the driver will wait for
|
|
* autonegotiation to complete.
|
|
* 1 - Wait for autonegotiation to complete
|
|
* 0 - Don't wait for autonegotiation to complete
|
|
*/
|
|
#define WAIT_FOR_AUTO_NEG_DEFAULT 0
|
|
|
|
/*
|
|
* EM_MASTER_SLAVE is only defined to enable a workaround for a known compatibility issue
|
|
* with 82541/82547 devices and some switches. See the "Known Limitations" section of
|
|
* the README file for a complete description and a list of affected switches.
|
|
*
|
|
* 0 = Hardware default
|
|
* 1 = Master mode
|
|
* 2 = Slave mode
|
|
* 3 = Auto master/slave
|
|
*/
|
|
/* #define EM_MASTER_SLAVE 2 */
|
|
|
|
/* Tunables -- End */
|
|
|
|
#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
|
|
ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
|
|
ADVERTISE_1000_FULL)
|
|
|
|
#define EM_VENDOR_ID 0x8086
|
|
#define EM_MMBA 0x0010 /* Mem base address */
|
|
#define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1))
|
|
|
|
#define EM_JUMBO_PBA 0x00000028
|
|
#define EM_DEFAULT_PBA 0x00000030
|
|
#define EM_SMARTSPEED_DOWNSHIFT 3
|
|
#define EM_SMARTSPEED_MAX 15
|
|
|
|
|
|
#define MAX_NUM_MULTICAST_ADDRESSES 128
|
|
#define PCI_ANY_ID (~0U)
|
|
#define ETHER_ALIGN 2
|
|
|
|
/* Defines for printing debug information */
|
|
#define DEBUG_INIT 0
|
|
#define DEBUG_IOCTL 0
|
|
#define DEBUG_HW 0
|
|
|
|
#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n")
|
|
#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A)
|
|
#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B)
|
|
#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n")
|
|
#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A)
|
|
#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B)
|
|
#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n")
|
|
#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A)
|
|
#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B)
|
|
|
|
|
|
/* Supported RX Buffer Sizes */
|
|
#define EM_RXBUFFER_2048 2048
|
|
#define EM_RXBUFFER_4096 4096
|
|
#define EM_RXBUFFER_8192 8192
|
|
#define EM_RXBUFFER_16384 16384
|
|
|
|
#define EM_MAX_SCATTER 64
|
|
|
|
/* ******************************************************************************
|
|
* vendor_info_array
|
|
*
|
|
* This array contains the list of Subvendor/Subdevice IDs on which the driver
|
|
* should load.
|
|
*
|
|
* ******************************************************************************/
|
|
typedef struct _em_vendor_info_t {
|
|
unsigned int vendor_id;
|
|
unsigned int device_id;
|
|
unsigned int subvendor_id;
|
|
unsigned int subdevice_id;
|
|
unsigned int index;
|
|
} em_vendor_info_t;
|
|
|
|
|
|
struct em_buffer {
|
|
struct mbuf *m_head;
|
|
bus_dmamap_t map; /* bus_dma map for packet */
|
|
};
|
|
|
|
struct em_q {
|
|
bus_dmamap_t map; /* bus_dma map for packet */
|
|
int nsegs; /* # of segments/descriptors */
|
|
bus_dma_segment_t segs[EM_MAX_SCATTER];
|
|
};
|
|
|
|
/*
|
|
* Bus dma allocation structure used by
|
|
* em_dma_malloc and em_dma_free.
|
|
*/
|
|
struct em_dma_alloc {
|
|
bus_addr_t dma_paddr;
|
|
caddr_t dma_vaddr;
|
|
bus_dma_tag_t dma_tag;
|
|
bus_dmamap_t dma_map;
|
|
bus_dma_segment_t dma_seg;
|
|
bus_size_t dma_size;
|
|
int dma_nseg;
|
|
};
|
|
|
|
typedef enum _XSUM_CONTEXT_T {
|
|
OFFLOAD_NONE,
|
|
OFFLOAD_TCP_IP,
|
|
OFFLOAD_UDP_IP
|
|
} XSUM_CONTEXT_T;
|
|
|
|
struct adapter;
|
|
struct em_int_delay_info {
|
|
struct adapter *adapter; /* Back-pointer to the adapter struct */
|
|
int offset; /* Register offset to read/write */
|
|
int value; /* Current value in usecs */
|
|
};
|
|
|
|
/* For 82544 PCIX Workaround */
|
|
typedef struct _ADDRESS_LENGTH_PAIR
|
|
{
|
|
u_int64_t address;
|
|
u_int32_t length;
|
|
} ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR;
|
|
|
|
typedef struct _DESCRIPTOR_PAIR
|
|
{
|
|
ADDRESS_LENGTH_PAIR descriptor[4];
|
|
u_int32_t elements;
|
|
} DESC_ARRAY, *PDESC_ARRAY;
|
|
|
|
/* Our adapter structure */
|
|
struct adapter {
|
|
struct arpcom interface_data;
|
|
struct adapter *next;
|
|
struct adapter *prev;
|
|
struct em_hw hw;
|
|
|
|
/* FreeBSD operating-system-specific structures */
|
|
struct em_osdep osdep;
|
|
struct device *dev;
|
|
struct resource *res_memory;
|
|
struct resource *res_ioport;
|
|
struct resource *res_interrupt;
|
|
void *int_handler_tag;
|
|
struct ifmedia media;
|
|
struct callout timer;
|
|
struct callout tx_fifo_timer;
|
|
int io_rid;
|
|
u_int8_t unit;
|
|
struct mtx mtx;
|
|
int em_insert_vlan_header;
|
|
|
|
/* Info about the board itself */
|
|
u_int32_t part_num;
|
|
u_int8_t link_active;
|
|
u_int16_t link_speed;
|
|
u_int16_t link_duplex;
|
|
u_int32_t smartspeed;
|
|
struct em_int_delay_info tx_int_delay;
|
|
struct em_int_delay_info tx_abs_int_delay;
|
|
struct em_int_delay_info rx_int_delay;
|
|
struct em_int_delay_info rx_abs_int_delay;
|
|
|
|
XSUM_CONTEXT_T active_checksum_context;
|
|
|
|
/*
|
|
* Transmit definitions
|
|
*
|
|
* We have an array of num_tx_desc descriptors (handled
|
|
* by the controller) paired with an array of tx_buffers
|
|
* (at tx_buffer_area).
|
|
* The index of the next available descriptor is next_avail_tx_desc.
|
|
* The number of remaining tx_desc is num_tx_desc_avail.
|
|
*/
|
|
struct em_dma_alloc txdma; /* bus_dma glue for tx desc */
|
|
struct em_tx_desc *tx_desc_base;
|
|
u_int32_t next_avail_tx_desc;
|
|
u_int32_t oldest_used_tx_desc;
|
|
volatile u_int16_t num_tx_desc_avail;
|
|
u_int16_t num_tx_desc;
|
|
u_int32_t txd_cmd;
|
|
struct em_buffer *tx_buffer_area;
|
|
bus_dma_tag_t txtag; /* dma tag for tx */
|
|
|
|
/*
|
|
* Receive definitions
|
|
*
|
|
* we have an array of num_rx_desc rx_desc (handled by the
|
|
* controller), and paired with an array of rx_buffers
|
|
* (at rx_buffer_area).
|
|
* The next pair to check on receive is at offset next_rx_desc_to_check
|
|
*/
|
|
struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */
|
|
struct em_rx_desc *rx_desc_base;
|
|
u_int32_t next_rx_desc_to_check;
|
|
u_int16_t num_rx_desc;
|
|
u_int32_t rx_buffer_len;
|
|
struct em_buffer *rx_buffer_area;
|
|
bus_dma_tag_t rxtag;
|
|
|
|
/* Jumbo frame */
|
|
struct mbuf *fmp;
|
|
struct mbuf *lmp;
|
|
|
|
/* Misc stats maintained by the driver */
|
|
unsigned long dropped_pkts;
|
|
unsigned long mbuf_alloc_failed;
|
|
unsigned long mbuf_cluster_failed;
|
|
unsigned long no_tx_desc_avail1;
|
|
unsigned long no_tx_desc_avail2;
|
|
unsigned long no_tx_map_avail;
|
|
unsigned long no_tx_dma_setup;
|
|
|
|
/* Used in for 82547 10Mb Half workaround */
|
|
#define EM_PBA_BYTES_SHIFT 0xA
|
|
#define EM_TX_HEAD_ADDR_SHIFT 7
|
|
#define EM_PBA_TX_MASK 0xFFFF0000
|
|
#define EM_FIFO_HDR 0x10
|
|
|
|
#define EM_82547_PKT_THRESH 0x3e0
|
|
|
|
u_int32_t tx_fifo_size;
|
|
u_int32_t tx_fifo_head;
|
|
u_int32_t tx_fifo_head_addr;
|
|
u_int64_t tx_fifo_reset_cnt;
|
|
u_int64_t tx_fifo_wrk_cnt;
|
|
u_int32_t tx_head_addr;
|
|
|
|
/* For 82544 PCIX Workaround */
|
|
boolean_t pcix_82544;
|
|
boolean_t in_detach;
|
|
|
|
#ifdef DBG_STATS
|
|
unsigned long no_pkts_avail;
|
|
unsigned long clean_tx_interrupts;
|
|
|
|
#endif
|
|
struct em_hw_stats stats;
|
|
};
|
|
|
|
#define EM_LOCK_INIT(_sc, _name) \
|
|
mtx_init(&(_sc)->mtx, _name, MTX_NETWORK_LOCK, MTX_DEF)
|
|
#define EM_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->mtx)
|
|
#define EM_LOCK(_sc) mtx_lock(&(_sc)->mtx)
|
|
#define EM_UNLOCK(_sc) mtx_unlock(&(_sc)->mtx)
|
|
#define EM_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->mtx, MA_OWNED)
|
|
|
|
#endif /* _EM_H_DEFINED_ */
|