freebsd-skq/usr.sbin/zonectl/zonectl.c
Kenneth D. Merry 9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00

592 lines
15 KiB
C

/*-
* Copyright (c) 2015, 2016 Spectra Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* Authors: Ken Merry (Spectra Logic Corporation)
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/ioctl.h>
#include <sys/stdint.h>
#include <sys/types.h>
#include <sys/endian.h>
#include <sys/sbuf.h>
#include <sys/queue.h>
#include <sys/disk.h>
#include <sys/disk_zone.h>
#include <stdio.h>
#include <stdlib.h>
#include <inttypes.h>
#include <unistd.h>
#include <string.h>
#include <strings.h>
#include <fcntl.h>
#include <ctype.h>
#include <limits.h>
#include <err.h>
#include <locale.h>
#include <cam/cam.h>
#include <cam/cam_debug.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
static struct scsi_nv zone_cmd_map[] = {
{ "rz", DISK_ZONE_REPORT_ZONES },
{ "reportzones", DISK_ZONE_REPORT_ZONES },
{ "close", DISK_ZONE_CLOSE },
{ "finish", DISK_ZONE_FINISH },
{ "open", DISK_ZONE_OPEN },
{ "rwp", DISK_ZONE_RWP },
{ "params", DISK_ZONE_GET_PARAMS }
};
static struct scsi_nv zone_rep_opts[] = {
{ "all", DISK_ZONE_REP_ALL },
{ "empty", DISK_ZONE_REP_EMPTY },
{ "imp_open", DISK_ZONE_REP_IMP_OPEN },
{ "exp_open", DISK_ZONE_REP_EXP_OPEN },
{ "closed", DISK_ZONE_REP_CLOSED },
{ "full", DISK_ZONE_REP_FULL },
{ "readonly", DISK_ZONE_REP_READONLY },
{ "ro", DISK_ZONE_REP_READONLY },
{ "offline", DISK_ZONE_REP_OFFLINE },
{ "reset", DISK_ZONE_REP_RWP },
{ "rwp", DISK_ZONE_REP_RWP },
{ "nonseq", DISK_ZONE_REP_NON_SEQ },
{ "nonwp", DISK_ZONE_REP_NON_WP }
};
typedef enum {
ZONE_OF_NORMAL = 0x00,
ZONE_OF_SUMMARY = 0x01,
ZONE_OF_SCRIPT = 0x02
} zone_output_flags;
static struct scsi_nv zone_print_opts[] = {
{ "normal", ZONE_OF_NORMAL },
{ "summary", ZONE_OF_SUMMARY },
{ "script", ZONE_OF_SCRIPT }
};
static struct scsi_nv zone_cmd_desc_table[] = {
{"Report Zones", DISK_ZONE_RZ_SUP },
{"Open", DISK_ZONE_OPEN_SUP },
{"Close", DISK_ZONE_CLOSE_SUP },
{"Finish", DISK_ZONE_FINISH_SUP },
{"Reset Write Pointer", DISK_ZONE_RWP_SUP }
};
typedef enum {
ZONE_PRINT_OK,
ZONE_PRINT_MORE_DATA,
ZONE_PRINT_ERROR
} zone_print_status;
typedef enum {
ZONE_FW_START,
ZONE_FW_LEN,
ZONE_FW_WP,
ZONE_FW_TYPE,
ZONE_FW_COND,
ZONE_FW_SEQ,
ZONE_FW_RESET,
ZONE_NUM_FIELDS
} zone_field_widths;
static void usage(int error);
static void zonectl_print_params(struct disk_zone_disk_params *params);
zone_print_status zonectl_print_rz(struct disk_zone_report *report,
zone_output_flags out_flags, int first_pass);
static void
usage(int error)
{
fprintf(error ? stderr : stdout,
"usage: zonectl <-d dev> <-c cmd> [-a][-o rep_opts] [-l lba][-P print_opts]\n"
);
}
static void
zonectl_print_params(struct disk_zone_disk_params *params)
{
unsigned int i;
int first;
printf("Zone Mode: ");
switch (params->zone_mode) {
case DISK_ZONE_MODE_NONE:
printf("None");
break;
case DISK_ZONE_MODE_HOST_AWARE:
printf("Host Aware");
break;
case DISK_ZONE_MODE_DRIVE_MANAGED:
printf("Drive Managed");
break;
case DISK_ZONE_MODE_HOST_MANAGED:
printf("Host Managed");
break;
default:
printf("Unknown mode %#x", params->zone_mode);
break;
}
printf("\n");
first = 1;
printf("Command support: ");
for (i = 0; i < sizeof(zone_cmd_desc_table) /
sizeof(zone_cmd_desc_table[0]); i++) {
if (params->flags & zone_cmd_desc_table[i].value) {
if (first == 0)
printf(", ");
else
first = 0;
printf("%s", zone_cmd_desc_table[i].name);
}
}
if (first == 1)
printf("None");
printf("\n");
printf("Unrestricted Read in Sequential Write Required Zone "
"(URSWRZ): %s\n", (params->flags & DISK_ZONE_DISK_URSWRZ) ?
"Yes" : "No");
printf("Optimal Number of Open Sequential Write Preferred Zones: ");
if (params->flags & DISK_ZONE_OPT_SEQ_SET)
if (params->optimal_seq_zones == SVPD_ZBDC_OPT_SEQ_NR)
printf("Not Reported");
else
printf("%ju", (uintmax_t)params->optimal_seq_zones);
else
printf("Not Set");
printf("\n");
printf("Optimal Number of Non-Sequentially Written Sequential Write "
"Preferred Zones: ");
if (params->flags & DISK_ZONE_OPT_NONSEQ_SET)
if (params->optimal_nonseq_zones == SVPD_ZBDC_OPT_NONSEQ_NR)
printf("Not Reported");
else
printf("%ju",(uintmax_t)params->optimal_nonseq_zones);
else
printf("Not Set");
printf("\n");
printf("Maximum Number of Open Sequential Write Required Zones: ");
if (params->flags & DISK_ZONE_MAX_SEQ_SET)
if (params->max_seq_zones == SVPD_ZBDC_MAX_SEQ_UNLIMITED)
printf("Unlimited");
else
printf("%ju", (uintmax_t)params->max_seq_zones);
else
printf("Not Set");
printf("\n");
}
zone_print_status
zonectl_print_rz(struct disk_zone_report *report, zone_output_flags out_flags,
int first_pass)
{
zone_print_status status = ZONE_PRINT_OK;
struct disk_zone_rep_header *header = &report->header;
int field_widths[ZONE_NUM_FIELDS];
struct disk_zone_rep_entry *entry;
uint64_t next_lba = 0;
char tmpstr[80];
char word_sep;
int more_data = 0;
uint32_t i;
field_widths[ZONE_FW_START] = 11;
field_widths[ZONE_FW_LEN] = 6;
field_widths[ZONE_FW_WP] = 11;
field_widths[ZONE_FW_TYPE] = 13;
field_widths[ZONE_FW_COND] = 13;
field_widths[ZONE_FW_SEQ] = 14;
field_widths[ZONE_FW_RESET] = 16;
if ((report->entries_available - report->entries_filled) > 0) {
more_data = 1;
status = ZONE_PRINT_MORE_DATA;
}
if (out_flags == ZONE_OF_SCRIPT)
word_sep = '_';
else
word_sep = ' ';
if ((out_flags != ZONE_OF_SCRIPT)
&& (first_pass != 0)) {
printf("%u zones, Maximum LBA %#jx (%ju)\n",
report->entries_available,
(uintmax_t)header->maximum_lba,
(uintmax_t)header->maximum_lba);
switch (header->same) {
case DISK_ZONE_SAME_ALL_DIFFERENT:
printf("Zone lengths and types may vary\n");
break;
case DISK_ZONE_SAME_ALL_SAME:
printf("Zone lengths and types are all the same\n");
break;
case DISK_ZONE_SAME_LAST_DIFFERENT:
printf("Zone types are the same, last zone length "
"differs\n");
break;
case DISK_ZONE_SAME_TYPES_DIFFERENT:
printf("Zone lengths are the same, types vary\n");
break;
default:
printf("Unknown SAME field value %#x\n",header->same);
break;
}
}
if (out_flags == ZONE_OF_SUMMARY) {
status = ZONE_PRINT_OK;
goto bailout;
}
if ((out_flags == ZONE_OF_NORMAL)
&& (first_pass != 0)) {
printf("%*s %*s %*s %*s %*s %*s %*s\n",
field_widths[ZONE_FW_START], "Start LBA",
field_widths[ZONE_FW_LEN], "Length",
field_widths[ZONE_FW_WP], "WP LBA",
field_widths[ZONE_FW_TYPE], "Zone Type",
field_widths[ZONE_FW_COND], "Condition",
field_widths[ZONE_FW_SEQ], "Sequential",
field_widths[ZONE_FW_RESET], "Reset");
}
for (i = 0; i < report->entries_filled; i++) {
entry = &report->entries[i];
printf("%#*jx, %*ju, %#*jx, ", field_widths[ZONE_FW_START],
(uintmax_t)entry->zone_start_lba,
field_widths[ZONE_FW_LEN],
(uintmax_t)entry->zone_length, field_widths[ZONE_FW_WP],
(uintmax_t)entry->write_pointer_lba);
switch (entry->zone_type) {
case DISK_ZONE_TYPE_CONVENTIONAL:
snprintf(tmpstr, sizeof(tmpstr), "Conventional");
break;
case DISK_ZONE_TYPE_SEQ_PREFERRED:
case DISK_ZONE_TYPE_SEQ_REQUIRED:
snprintf(tmpstr, sizeof(tmpstr), "Seq%c%s",
word_sep, (entry->zone_type ==
DISK_ZONE_TYPE_SEQ_PREFERRED) ? "Preferred" :
"Required");
break;
default:
snprintf(tmpstr, sizeof(tmpstr), "Zone%ctype%c%#x",
word_sep, word_sep, entry->zone_type);
break;
}
printf("%*s, ", field_widths[ZONE_FW_TYPE], tmpstr);
switch (entry->zone_condition) {
case DISK_ZONE_COND_NOT_WP:
snprintf(tmpstr, sizeof(tmpstr), "NWP");
break;
case DISK_ZONE_COND_EMPTY:
snprintf(tmpstr, sizeof(tmpstr), "Empty");
break;
case DISK_ZONE_COND_IMPLICIT_OPEN:
snprintf(tmpstr, sizeof(tmpstr), "Implicit%cOpen",
word_sep);
break;
case DISK_ZONE_COND_EXPLICIT_OPEN:
snprintf(tmpstr, sizeof(tmpstr), "Explicit%cOpen",
word_sep);
break;
case DISK_ZONE_COND_CLOSED:
snprintf(tmpstr, sizeof(tmpstr), "Closed");
break;
case DISK_ZONE_COND_READONLY:
snprintf(tmpstr, sizeof(tmpstr), "Readonly");
break;
case DISK_ZONE_COND_FULL:
snprintf(tmpstr, sizeof(tmpstr), "Full");
break;
case DISK_ZONE_COND_OFFLINE:
snprintf(tmpstr, sizeof(tmpstr), "Offline");
break;
default:
snprintf(tmpstr, sizeof(tmpstr), "%#x",
entry->zone_condition);
break;
}
printf("%*s, ", field_widths[ZONE_FW_COND], tmpstr);
if (entry->zone_flags & DISK_ZONE_FLAG_NON_SEQ)
snprintf(tmpstr, sizeof(tmpstr), "Non%cSequential",
word_sep);
else
snprintf(tmpstr, sizeof(tmpstr), "Sequential");
printf("%*s, ", field_widths[ZONE_FW_SEQ], tmpstr);
if (entry->zone_flags & DISK_ZONE_FLAG_RESET)
snprintf(tmpstr, sizeof(tmpstr), "Reset%cNeeded",
word_sep);
else
snprintf(tmpstr, sizeof(tmpstr), "No%cReset%cNeeded",
word_sep, word_sep);
printf("%*s\n", field_widths[ZONE_FW_RESET], tmpstr);
next_lba = entry->zone_start_lba + entry->zone_length;
}
bailout:
report->starting_id = next_lba;
return (status);
}
int
main(int argc, char **argv)
{
int c;
int all_zones = 0;
int error = 0;
int action = -1, rep_option = -1;
int fd = -1;
uint64_t lba = 0;
zone_output_flags out_flags = ZONE_OF_NORMAL;
char *filename = NULL;
struct disk_zone_args zone_args;
struct disk_zone_rep_entry *entries = NULL;
uint32_t num_entries = 16384;
zone_print_status zp_status;
int first_pass = 1;
size_t entry_alloc_size;
int open_flags = O_RDONLY;
while ((c = getopt(argc, argv, "ac:d:hl:o:P:?")) != -1) {
switch (c) {
case 'a':
all_zones = 1;
break;
case 'c': {
scsi_nv_status status;
int entry_num;
status = scsi_get_nv(zone_cmd_map,
(sizeof(zone_cmd_map) / sizeof(zone_cmd_map[0])),
optarg, &entry_num, SCSI_NV_FLAG_IG_CASE);
if (status == SCSI_NV_FOUND)
action = zone_cmd_map[entry_num].value;
else {
warnx("%s: %s: %s option %s", __func__,
(status == SCSI_NV_AMBIGUOUS) ?
"ambiguous" : "invalid", "zone command",
optarg);
error = 1;
goto bailout;
}
break;
}
case 'd':
filename = strdup(optarg);
if (filename == NULL)
err(1, "Unable to allocate memory for "
"filename");
break;
case 'l': {
char *endptr;
lba = strtoull(optarg, &endptr, 0);
if (*endptr != '\0') {
warnx("%s: invalid lba argument %s", __func__,
optarg);
error = 1;
goto bailout;
}
break;
}
case 'o': {
scsi_nv_status status;
int entry_num;
status = scsi_get_nv(zone_rep_opts,
(sizeof(zone_rep_opts) /
sizeof(zone_rep_opts[0])),
optarg, &entry_num, SCSI_NV_FLAG_IG_CASE);
if (status == SCSI_NV_FOUND)
rep_option = zone_rep_opts[entry_num].value;
else {
warnx("%s: %s: %s option %s", __func__,
(status == SCSI_NV_AMBIGUOUS) ?
"ambiguous" : "invalid", "report zones",
optarg);
error = 1;
goto bailout;
}
break;
}
case 'P': {
scsi_nv_status status;
int entry_num;
status = scsi_get_nv(zone_print_opts,
(sizeof(zone_print_opts) /
sizeof(zone_print_opts[0])), optarg, &entry_num,
SCSI_NV_FLAG_IG_CASE);
if (status == SCSI_NV_FOUND)
out_flags = zone_print_opts[entry_num].value;
else {
warnx("%s: %s: %s option %s", __func__,
(status == SCSI_NV_AMBIGUOUS) ?
"ambiguous" : "invalid", "print",
optarg);
error = 1;
goto bailout;
}
break;
}
default:
error = 1;
case 'h': /*FALLTHROUGH*/
usage(error);
goto bailout;
break; /*NOTREACHED*/
}
}
if (filename == NULL) {
warnx("You must specify a device with -d");
error = 1;
}
if (action == -1) {
warnx("You must specify an action with -c");
error = 1;
}
if (error != 0) {
usage(error);
goto bailout;
}
bzero(&zone_args, sizeof(zone_args));
zone_args.zone_cmd = action;
switch (action) {
case DISK_ZONE_OPEN:
case DISK_ZONE_CLOSE:
case DISK_ZONE_FINISH:
case DISK_ZONE_RWP:
open_flags = O_RDWR;
zone_args.zone_params.rwp.id = lba;
if (all_zones != 0)
zone_args.zone_params.rwp.flags |=
DISK_ZONE_RWP_FLAG_ALL;
break;
case DISK_ZONE_REPORT_ZONES: {
entry_alloc_size = num_entries *
sizeof(struct disk_zone_rep_entry);
entries = malloc(entry_alloc_size);
if (entries == NULL) {
warn("Could not allocate %zu bytes",
entry_alloc_size);
error = 1;
goto bailout;
}
zone_args.zone_params.report.entries_allocated = num_entries;
zone_args.zone_params.report.entries = entries;
zone_args.zone_params.report.starting_id = lba;
if (rep_option != -1)
zone_args.zone_params.report.rep_options = rep_option;
break;
}
case DISK_ZONE_GET_PARAMS:
break;
default:
warnx("Unknown action %d", action);
error = 1;
goto bailout;
break; /*NOTREACHED*/
}
fd = open(filename, open_flags);
if (fd == -1) {
warn("Unable to open device %s", filename);
error = 1;
goto bailout;
}
next_chunk:
error = ioctl(fd, DIOCZONECMD, &zone_args);
if (error == -1) {
warn("DIOCZONECMD ioctl failed");
error = 1;
goto bailout;
}
switch (action) {
case DISK_ZONE_OPEN:
case DISK_ZONE_CLOSE:
case DISK_ZONE_FINISH:
case DISK_ZONE_RWP:
break;
case DISK_ZONE_REPORT_ZONES:
zp_status = zonectl_print_rz(&zone_args.zone_params.report,
out_flags, first_pass);
if (zp_status == ZONE_PRINT_MORE_DATA) {
first_pass = 0;
bzero(entries, entry_alloc_size);
zone_args.zone_params.report.entries_filled = 0;
goto next_chunk;
} else if (zp_status == ZONE_PRINT_ERROR)
error = 1;
break;
case DISK_ZONE_GET_PARAMS:
zonectl_print_params(&zone_args.zone_params.disk_params);
break;
default:
warnx("Unknown action %d", action);
error = 1;
goto bailout;
break; /*NOTREACHED*/
}
bailout:
free(entries);
if (fd != -1)
close(fd);
exit (error);
}