2d1121be27
the miibus attached to octe interfaces. o) Add an SMI/MDIO interface to the MV88E61XX and use it for the switch PHY on the Lanner MR-320. An actual driver for the switch PHY will come later. Note that for now it intercepts and fakes MII_BMSR reads to prevent the miibus from talking to anything but the switch itself.
722 lines
27 KiB
C
722 lines
27 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2008 Cavium Networks (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
*
|
|
* * Neither the name of Cavium Networks nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS
|
|
* OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
|
|
* RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
|
|
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
|
|
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
|
|
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
|
|
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET
|
|
* POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT
|
|
* OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
*
|
|
*
|
|
* For any questions regarding licensing please contact marketing@caviumnetworks.com
|
|
*
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Helper functions to abstract board specific data about
|
|
* network ports from the rest of the cvmx-helper files.
|
|
*
|
|
* <hr>$Revision: 41946 $<hr>
|
|
*/
|
|
#include "cvmx.h"
|
|
#include "cvmx-app-init.h"
|
|
#include "cvmx-mdio.h"
|
|
#include "cvmx-sysinfo.h"
|
|
#include "cvmx-helper.h"
|
|
#include "cvmx-helper-util.h"
|
|
#include "cvmx-helper-board.h"
|
|
|
|
/**
|
|
* cvmx_override_board_link_get(int ipd_port) is a function
|
|
* pointer. It is meant to allow customization of the process of
|
|
* talking to a PHY to determine link speed. It is called every
|
|
* time a PHY must be polled for link status. Users should set
|
|
* this pointer to a function before calling any cvmx-helper
|
|
* operations.
|
|
*/
|
|
CVMX_SHARED cvmx_helper_link_info_t (*cvmx_override_board_link_get)(int ipd_port) = NULL;
|
|
|
|
/**
|
|
* Return the MII PHY address associated with the given IPD
|
|
* port. A result of -1 means there isn't a MII capable PHY
|
|
* connected to this port. On chips supporting multiple MII
|
|
* busses the bus number is encoded in bits <15:8>.
|
|
*
|
|
* This function must be modified for every new Octeon board.
|
|
* Internally it uses switch statements based on the cvmx_sysinfo
|
|
* data to determine board types and revisions. It replies on the
|
|
* fact that every Octeon board receives a unique board type
|
|
* enumeration from the bootloader.
|
|
*
|
|
* @param ipd_port Octeon IPD port to get the MII address for.
|
|
*
|
|
* @return MII PHY address and bus number or -1.
|
|
*/
|
|
int cvmx_helper_board_get_mii_address(int ipd_port)
|
|
{
|
|
/*
|
|
* Board types we have to know at compile-time.
|
|
*/
|
|
#ifdef OCTEON_BOARD_CAPK_0100ND
|
|
switch (ipd_port) {
|
|
case 0:
|
|
return 2;
|
|
case 1:
|
|
return 3;
|
|
case 2:
|
|
/* XXX Switch PHY? */
|
|
return -1;
|
|
default:
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* For board types we can determine at runtime.
|
|
*/
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_SIM:
|
|
/* Simulator doesn't have MII */
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBT3000:
|
|
case CVMX_BOARD_TYPE_EBT5800:
|
|
case CVMX_BOARD_TYPE_THUNDER:
|
|
case CVMX_BOARD_TYPE_NICPRO2:
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
#endif
|
|
/* Interface 0 is SPI4, interface 1 is RGMII */
|
|
if ((ipd_port >= 16) && (ipd_port < 20))
|
|
return ipd_port - 16;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_KODAMA:
|
|
case CVMX_BOARD_TYPE_EBH3100:
|
|
case CVMX_BOARD_TYPE_HIKARI:
|
|
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
|
|
/* Port 0 is WAN connected to a PHY, Port 1 is GMII connected to a
|
|
switch */
|
|
if (ipd_port == 0)
|
|
return 4;
|
|
else if (ipd_port == 1)
|
|
return 9;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_NAC38:
|
|
/* Board has 8 RGMII ports PHYs are 0-7 */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port;
|
|
else if ((ipd_port >= 16) && (ipd_port < 20))
|
|
return ipd_port - 16 + 4;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBH3000:
|
|
/* Board has dual SPI4 and no PHYs */
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBH5200:
|
|
case CVMX_BOARD_TYPE_EBH5201:
|
|
case CVMX_BOARD_TYPE_EBT5200:
|
|
/* Board has 4 SGMII ports. The PHYs start right after the MII
|
|
ports MII0 = 0, MII1 = 1, SGMII = 2-5 */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port+2;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBH5600:
|
|
case CVMX_BOARD_TYPE_EBH5601:
|
|
/* Board has 8 SGMII ports. 4 connect out, two connect to a switch,
|
|
and 2 loop to each other */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port+1;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_CUST_NB5:
|
|
if (ipd_port == 2)
|
|
return 4;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_NIC_XLE_4G:
|
|
/* Board has 4 SGMII ports. connected QLM3(interface 1) */
|
|
if ((ipd_port >= 16) && (ipd_port < 20))
|
|
return ipd_port - 16 + 1;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
return -1; /* No PHYs are connected to Octeon, everything is through switch */
|
|
|
|
/* Private vendor-defined boards. */
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
/* Port 0 is a Marvell 88E6161 switch, ports 1 and 2 are Marvell
|
|
88E1111 interfaces. */
|
|
switch (ipd_port) {
|
|
case 0:
|
|
return 16;
|
|
case 1:
|
|
return 1;
|
|
case 2:
|
|
return 2;
|
|
default:
|
|
return -1;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* Some unknown board. Somebody forgot to update this function... */
|
|
cvmx_dprintf("cvmx_helper_board_get_mii_address: Unknown board type %d\n",
|
|
cvmx_sysinfo_get()->board_type);
|
|
return -1;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* This function is the board specific method of determining an
|
|
* ethernet ports link speed. Most Octeon boards have Marvell PHYs
|
|
* and are handled by the fall through case. This function must be
|
|
* updated for boards that don't have the normal Marvell PHYs.
|
|
*
|
|
* This function must be modified for every new Octeon board.
|
|
* Internally it uses switch statements based on the cvmx_sysinfo
|
|
* data to determine board types and revisions. It relies on the
|
|
* fact that every Octeon board receives a unique board type
|
|
* enumeration from the bootloader.
|
|
*
|
|
* @param ipd_port IPD input port associated with the port we want to get link
|
|
* status for.
|
|
*
|
|
* @return The ports link status. If the link isn't fully resolved, this must
|
|
* return zero.
|
|
*/
|
|
cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
int phy_addr;
|
|
int is_broadcom_phy = 0;
|
|
|
|
/* Give the user a chance to override the processing of this function */
|
|
if (cvmx_override_board_link_get)
|
|
return cvmx_override_board_link_get(ipd_port);
|
|
|
|
/* Unless we fix it later, all links are defaulted to down */
|
|
result.u64 = 0;
|
|
|
|
#if !defined(OCTEON_BOARD_CAPK_0100ND)
|
|
/* This switch statement should handle all ports that either don't use
|
|
Marvell PHYS, or don't support in-band status */
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_SIM:
|
|
/* The simulator gives you a simulated 1Gbps full duplex link */
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
case CVMX_BOARD_TYPE_EBH3100:
|
|
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
|
|
/* Port 1 on these boards is always Gigabit */
|
|
if (ipd_port == 1)
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
/* Fall through to the generic code below */
|
|
break;
|
|
case CVMX_BOARD_TYPE_CUST_NB5:
|
|
/* Port 1 on these boards is always Gigabit */
|
|
if (ipd_port == 1)
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
else /* The other port uses a broadcom PHY */
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
/* Port 1 on these boards is always Gigabit */
|
|
if (ipd_port == 2)
|
|
{
|
|
/* Port 2 is not hooked up */
|
|
result.u64 = 0;
|
|
return result;
|
|
}
|
|
else
|
|
{
|
|
/* Ports 0 and 1 connect to the switch */
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
break;
|
|
/* Private vendor-defined boards. */
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
/* Port 0 connects to the switch */
|
|
if (ipd_port == 0)
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
break;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
|
|
if (phy_addr != -1)
|
|
{
|
|
if (is_broadcom_phy)
|
|
{
|
|
/* Below we are going to read SMI/MDIO register 0x19 which works
|
|
on Broadcom parts */
|
|
int phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x19);
|
|
switch ((phy_status>>8) & 0x7)
|
|
{
|
|
case 0:
|
|
result.u64 = 0;
|
|
break;
|
|
case 1:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 0;
|
|
result.s.speed = 10;
|
|
break;
|
|
case 2:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 10;
|
|
break;
|
|
case 3:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 0;
|
|
result.s.speed = 100;
|
|
break;
|
|
case 4:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 100;
|
|
break;
|
|
case 5:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 100;
|
|
break;
|
|
case 6:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 0;
|
|
result.s.speed = 1000;
|
|
break;
|
|
case 7:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* This code assumes we are using a Marvell Gigabit PHY. All the
|
|
speed information can be read from register 17 in one go. Somebody
|
|
using a different PHY will need to handle it above in the board
|
|
specific area */
|
|
int phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
|
|
|
|
/* If the resolve bit 11 isn't set, see if autoneg is turned off
|
|
(bit 12, reg 0). The resolve bit doesn't get set properly when
|
|
autoneg is off, so force it */
|
|
if ((phy_status & (1<<11)) == 0)
|
|
{
|
|
int auto_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0);
|
|
if ((auto_status & (1<<12)) == 0)
|
|
phy_status |= 1<<11;
|
|
}
|
|
|
|
/* Only return a link if the PHY has finished auto negotiation
|
|
and set the resolved bit (bit 11) */
|
|
if (phy_status & (1<<11))
|
|
{
|
|
#if defined(OCTEON_BOARD_CAPK_0100ND)
|
|
result.s.link_up = (phy_status>>10)&1;
|
|
#else
|
|
result.s.link_up = 1;
|
|
#endif
|
|
result.s.full_duplex = ((phy_status>>13)&1);
|
|
switch ((phy_status>>14)&3)
|
|
{
|
|
case 0: /* 10 Mbps */
|
|
result.s.speed = 10;
|
|
break;
|
|
case 1: /* 100 Mbps */
|
|
result.s.speed = 100;
|
|
break;
|
|
case 2: /* 1 Gbps */
|
|
result.s.speed = 1000;
|
|
break;
|
|
case 3: /* Illegal */
|
|
result.u64 = 0;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else if (OCTEON_IS_MODEL(OCTEON_CN3XXX) || OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
|
|
{
|
|
/* We don't have a PHY address, so attempt to use in-band status. It is
|
|
really important that boards not supporting in-band status never get
|
|
here. Reading broken in-band status tends to do bad things */
|
|
cvmx_gmxx_rxx_rx_inbnd_t inband_status;
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
inband_status.u64 = cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
|
|
|
|
result.s.link_up = inband_status.s.status;
|
|
result.s.full_duplex = inband_status.s.duplex;
|
|
switch (inband_status.s.speed)
|
|
{
|
|
case 0: /* 10 Mbps */
|
|
result.s.speed = 10;
|
|
break;
|
|
case 1: /* 100 Mbps */
|
|
result.s.speed = 100;
|
|
break;
|
|
case 2: /* 1 Gbps */
|
|
result.s.speed = 1000;
|
|
break;
|
|
case 3: /* Illegal */
|
|
result.u64 = 0;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* We don't have a PHY address and we don't have in-band status. There
|
|
is no way to determine the link speed. Return down assuming this
|
|
port isn't wired */
|
|
result.u64 = 0;
|
|
}
|
|
|
|
/* If link is down, return all fields as zero. */
|
|
if (!result.s.link_up)
|
|
result.u64 = 0;
|
|
|
|
return result;
|
|
}
|
|
|
|
|
|
/**
|
|
* This function as a board specific method of changing the PHY
|
|
* speed, duplex, and auto-negotiation. This programs the PHY and
|
|
* not Octeon. This can be used to force Octeon's links to
|
|
* specific settings.
|
|
*
|
|
* @param phy_addr The address of the PHY to program
|
|
* @param enable_autoneg
|
|
* Non zero if you want to enable auto-negotiation.
|
|
* @param link_info Link speed to program. If the speed is zero and auto-negotiation
|
|
* is enabled, all possible negotiation speeds are advertised.
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
int cvmx_helper_board_link_set_phy(int phy_addr, cvmx_helper_board_set_phy_link_flags_types_t link_flags,
|
|
cvmx_helper_link_info_t link_info)
|
|
{
|
|
|
|
/* Set the flow control settings based on link_flags */
|
|
if ((link_flags & set_phy_link_flags_flow_control_mask) != set_phy_link_flags_flow_control_dont_touch)
|
|
{
|
|
cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
|
|
reg_autoneg_adver.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
|
|
reg_autoneg_adver.s.asymmetric_pause = (link_flags & set_phy_link_flags_flow_control_mask) == set_phy_link_flags_flow_control_enable;
|
|
reg_autoneg_adver.s.pause = (link_flags & set_phy_link_flags_flow_control_mask) == set_phy_link_flags_flow_control_enable;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER, reg_autoneg_adver.u16);
|
|
}
|
|
|
|
/* If speed isn't set and autoneg is on advertise all supported modes */
|
|
if ((link_flags & set_phy_link_flags_autoneg) && (link_info.s.speed == 0))
|
|
{
|
|
cvmx_mdio_phy_reg_control_t reg_control;
|
|
cvmx_mdio_phy_reg_status_t reg_status;
|
|
cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
|
|
cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
|
|
cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
|
|
|
|
reg_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_STATUS);
|
|
reg_autoneg_adver.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
|
|
reg_autoneg_adver.s.advert_100base_t4 = reg_status.s.capable_100base_t4;
|
|
reg_autoneg_adver.s.advert_10base_tx_full = reg_status.s.capable_10_full;
|
|
reg_autoneg_adver.s.advert_10base_tx_half = reg_status.s.capable_10_half;
|
|
reg_autoneg_adver.s.advert_100base_tx_full = reg_status.s.capable_100base_x_full;
|
|
reg_autoneg_adver.s.advert_100base_tx_half = reg_status.s.capable_100base_x_half;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER, reg_autoneg_adver.u16);
|
|
if (reg_status.s.capable_extended_status)
|
|
{
|
|
reg_extended_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
|
|
reg_control_1000.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000);
|
|
reg_control_1000.s.advert_1000base_t_full = reg_extended_status.s.capable_1000base_t_full;
|
|
reg_control_1000.s.advert_1000base_t_half = reg_extended_status.s.capable_1000base_t_half;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000, reg_control_1000.u16);
|
|
}
|
|
reg_control.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL);
|
|
reg_control.s.autoneg_enable = 1;
|
|
reg_control.s.restart_autoneg = 1;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
|
|
}
|
|
else if ((link_flags & set_phy_link_flags_autoneg))
|
|
{
|
|
cvmx_mdio_phy_reg_control_t reg_control;
|
|
cvmx_mdio_phy_reg_status_t reg_status;
|
|
cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
|
|
cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
|
|
cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
|
|
|
|
reg_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_STATUS);
|
|
reg_autoneg_adver.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
|
|
reg_autoneg_adver.s.advert_100base_t4 = 0;
|
|
reg_autoneg_adver.s.advert_10base_tx_full = 0;
|
|
reg_autoneg_adver.s.advert_10base_tx_half = 0;
|
|
reg_autoneg_adver.s.advert_100base_tx_full = 0;
|
|
reg_autoneg_adver.s.advert_100base_tx_half = 0;
|
|
if (reg_status.s.capable_extended_status)
|
|
{
|
|
reg_extended_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
|
|
reg_control_1000.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000);
|
|
reg_control_1000.s.advert_1000base_t_full = 0;
|
|
reg_control_1000.s.advert_1000base_t_half = 0;
|
|
}
|
|
switch (link_info.s.speed)
|
|
{
|
|
case 10:
|
|
reg_autoneg_adver.s.advert_10base_tx_full = link_info.s.full_duplex;
|
|
reg_autoneg_adver.s.advert_10base_tx_half = !link_info.s.full_duplex;
|
|
break;
|
|
case 100:
|
|
reg_autoneg_adver.s.advert_100base_tx_full = link_info.s.full_duplex;
|
|
reg_autoneg_adver.s.advert_100base_tx_half = !link_info.s.full_duplex;
|
|
break;
|
|
case 1000:
|
|
reg_control_1000.s.advert_1000base_t_full = link_info.s.full_duplex;
|
|
reg_control_1000.s.advert_1000base_t_half = !link_info.s.full_duplex;
|
|
break;
|
|
}
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER, reg_autoneg_adver.u16);
|
|
if (reg_status.s.capable_extended_status)
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000, reg_control_1000.u16);
|
|
reg_control.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL);
|
|
reg_control.s.autoneg_enable = 1;
|
|
reg_control.s.restart_autoneg = 1;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
|
|
}
|
|
else
|
|
{
|
|
cvmx_mdio_phy_reg_control_t reg_control;
|
|
reg_control.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL);
|
|
reg_control.s.autoneg_enable = 0;
|
|
reg_control.s.restart_autoneg = 1;
|
|
reg_control.s.duplex = link_info.s.full_duplex;
|
|
if (link_info.s.speed == 1000)
|
|
{
|
|
reg_control.s.speed_msb = 1;
|
|
reg_control.s.speed_lsb = 0;
|
|
}
|
|
else if (link_info.s.speed == 100)
|
|
{
|
|
reg_control.s.speed_msb = 0;
|
|
reg_control.s.speed_lsb = 1;
|
|
}
|
|
else if (link_info.s.speed == 10)
|
|
{
|
|
reg_control.s.speed_msb = 0;
|
|
reg_control.s.speed_lsb = 0;
|
|
}
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* This function is called by cvmx_helper_interface_probe() after it
|
|
* determines the number of ports Octeon can support on a specific
|
|
* interface. This function is the per board location to override
|
|
* this value. It is called with the number of ports Octeon might
|
|
* support and should return the number of actual ports on the
|
|
* board.
|
|
*
|
|
* This function must be modifed for every new Octeon board.
|
|
* Internally it uses switch statements based on the cvmx_sysinfo
|
|
* data to determine board types and revisions. It relys on the
|
|
* fact that every Octeon board receives a unique board type
|
|
* enumeration from the bootloader.
|
|
*
|
|
* @param interface Interface to probe
|
|
* @param supported_ports
|
|
* Number of ports Octeon supports.
|
|
*
|
|
* @return Number of ports the actual board supports. Many times this will
|
|
* simple be "support_ports".
|
|
*/
|
|
int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
|
|
{
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
|
|
if (interface == 0)
|
|
return 2;
|
|
break;
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
if (interface == 0)
|
|
return 2;
|
|
break;
|
|
case CVMX_BOARD_TYPE_NIC_XLE_4G:
|
|
if (interface == 0)
|
|
return 0;
|
|
break;
|
|
/* The 2nd interface on the EBH5600 is connected to the Marvel switch,
|
|
which we don't support. Disable ports connected to it */
|
|
case CVMX_BOARD_TYPE_EBH5600:
|
|
if (interface == 1)
|
|
return 0;
|
|
break;
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
if (interface == 1)
|
|
return 12;
|
|
break;
|
|
#endif
|
|
}
|
|
#ifdef CVMX_BUILD_FOR_UBOOT
|
|
if (CVMX_HELPER_INTERFACE_MODE_SPI == cvmx_helper_interface_get_mode(interface) && getenv("disable_spi"))
|
|
return 0;
|
|
#endif
|
|
return supported_ports;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Enable packet input/output from the hardware. This function is
|
|
* called after by cvmx_helper_packet_hardware_enable() to
|
|
* perform board specific initialization. For most boards
|
|
* nothing is needed.
|
|
*
|
|
* @param interface Interface to enable
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
int __cvmx_helper_board_hardware_enable(int interface)
|
|
{
|
|
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5)
|
|
{
|
|
if (interface == 0)
|
|
{
|
|
/* Different config for switch port */
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
|
|
/* Boards with gigabit WAN ports need a different setting that is
|
|
compatible with 100 Mbit settings */
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0xc);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0xc);
|
|
}
|
|
}
|
|
else if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3010_EVB_HS5)
|
|
{
|
|
/* Broadcom PHYs require differnet ASX clocks. Unfortunately
|
|
many customer don't define a new board Id and simply
|
|
mangle the CN3010_EVB_HS5 */
|
|
if (interface == 0)
|
|
{
|
|
/* Some customers boards use a hacked up bootloader that identifies them as
|
|
** CN3010_EVB_HS5 evaluation boards. This leads to all kinds of configuration
|
|
** problems. Detect one case, and print warning, while trying to do the right thing.
|
|
*/
|
|
int phy_addr = cvmx_helper_board_get_mii_address(0);
|
|
if (phy_addr != -1)
|
|
{
|
|
int phy_identifier = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x2);
|
|
/* Is it a Broadcom PHY? */
|
|
if (phy_identifier == 0x0143)
|
|
{
|
|
cvmx_dprintf("\n");
|
|
cvmx_dprintf("ERROR:\n");
|
|
cvmx_dprintf("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
|
|
cvmx_dprintf("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
|
|
cvmx_dprintf("ERROR: All boards require a unique board type to identify them.\n");
|
|
cvmx_dprintf("ERROR:\n");
|
|
cvmx_dprintf("\n");
|
|
cvmx_wait(1000000000);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 5);
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 5);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
cvmx_helper_board_usb_clock_types_t __cvmx_helper_board_usb_get_clock_type(void)
|
|
{
|
|
switch (cvmx_sysinfo_get()->board_type) {
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
#endif
|
|
return USB_CLOCK_TYPE_CRYSTAL_12;
|
|
}
|
|
return USB_CLOCK_TYPE_REF_48;
|
|
}
|
|
|
|
int __cvmx_helper_board_usb_get_num_ports(int supported_ports)
|
|
{
|
|
switch (cvmx_sysinfo_get()->board_type) {
|
|
case CVMX_BOARD_TYPE_NIC_XLE_4G:
|
|
return 0;
|
|
}
|
|
|
|
return supported_ports;
|
|
}
|
|
|
|
|