freebsd-skq/sys/netinet6/in6_pcb.c
Robert Watson 81158452be Push acquisition of the accept mutex out of sofree() into the caller
(sorele()/sotryfree()):

- This permits the caller to acquire the accept mutex before the socket
  mutex, avoiding sofree() having to drop the socket mutex and re-order,
  which could lead to races permitting more than one thread to enter
  sofree() after a socket is ready to be free'd.

- This also covers clearing of the so_pcb weak socket reference from
  the protocol to the socket, preventing races in clearing and
  evaluation of the reference such that sofree() might be called more
  than once on the same socket.

This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket.  The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets.  The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.

RELENG_5_3 candidate.

MFC after:	3 days
Reviewed by:	dwhite
Discussed with:	gnn, dwhite, green
Reported by:	Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by:	Vlad <marchenko at gmail dot com>
2004-10-18 22:19:43 +00:00

964 lines
26 KiB
C

/* $FreeBSD$ */
/* $KAME: in6_pcb.c,v 1.31 2001/05/21 05:45:10 jinmei Exp $ */
/*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* Copyright (c) 1982, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_pcb.c 8.2 (Berkeley) 1/4/94
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sockio.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/proc.h>
#include <sys/jail.h>
#include <vm/uma.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/tcp_var.h>
#include <netinet/ip6.h>
#include <netinet/ip_var.h>
#include <netinet6/ip6_var.h>
#include <netinet6/nd6.h>
#include <netinet/in_pcb.h>
#include <netinet6/in6_pcb.h>
#ifdef IPSEC
#include <netinet6/ipsec.h>
#ifdef INET6
#include <netinet6/ipsec6.h>
#endif
#include <netinet6/ah.h>
#ifdef INET6
#include <netinet6/ah6.h>
#endif
#include <netkey/key.h>
#endif /* IPSEC */
#ifdef FAST_IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#include <netipsec/key.h>
#endif /* FAST_IPSEC */
struct in6_addr zeroin6_addr;
int
in6_pcbbind(inp, nam, cred)
register struct inpcb *inp;
struct sockaddr *nam;
struct ucred *cred;
{
struct socket *so = inp->inp_socket;
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)NULL;
struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
u_short lport = 0;
int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);
INP_INFO_WLOCK_ASSERT(pcbinfo);
INP_LOCK_ASSERT(inp);
if (!in6_ifaddr) /* XXX broken! */
return (EADDRNOTAVAIL);
if (inp->inp_lport || !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
return (EINVAL);
if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
wild = 1;
if (nam) {
sin6 = (struct sockaddr_in6 *)nam;
if (nam->sa_len != sizeof(*sin6))
return (EINVAL);
/*
* family check.
*/
if (nam->sa_family != AF_INET6)
return (EAFNOSUPPORT);
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, inp, NULL) != 0)
return EINVAL;
/* this must be cleared for ifa_ifwithaddr() */
sin6->sin6_scope_id = 0;
lport = sin6->sin6_port;
if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
/*
* Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
* allow compepte duplication of binding if
* SO_REUSEPORT is set, or if SO_REUSEADDR is set
* and a multicast address is bound on both
* new and duplicated sockets.
*/
if (so->so_options & SO_REUSEADDR)
reuseport = SO_REUSEADDR|SO_REUSEPORT;
} else if (!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
struct ifaddr *ia = NULL;
sin6->sin6_port = 0; /* yech... */
if ((ia = ifa_ifwithaddr((struct sockaddr *)sin6)) == 0)
return (EADDRNOTAVAIL);
/*
* XXX: bind to an anycast address might accidentally
* cause sending a packet with anycast source address.
* We should allow to bind to a deprecated address, since
* the application dares to use it.
*/
if (ia &&
((struct in6_ifaddr *)ia)->ia6_flags &
(IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|IN6_IFF_DETACHED)) {
return (EADDRNOTAVAIL);
}
}
if (lport) {
struct inpcb *t;
/* GROSS */
if (ntohs(lport) < IPV6PORT_RESERVED &&
suser_cred(cred, SUSER_ALLOWJAIL))
return (EACCES);
if (so->so_cred->cr_uid != 0 &&
!IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) {
t = in6_pcblookup_local(pcbinfo,
&sin6->sin6_addr, lport,
INPLOOKUP_WILDCARD);
if (t &&
((t->inp_vflag & INP_TIMEWAIT) == 0) &&
(so->so_type != SOCK_STREAM ||
IN6_IS_ADDR_UNSPECIFIED(&t->in6p_faddr)) &&
(!IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr) ||
!IN6_IS_ADDR_UNSPECIFIED(&t->in6p_laddr) ||
(t->inp_socket->so_options & SO_REUSEPORT)
== 0) && (so->so_cred->cr_uid !=
t->inp_socket->so_cred->cr_uid))
return (EADDRINUSE);
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
struct sockaddr_in sin;
in6_sin6_2_sin(&sin, sin6);
t = in_pcblookup_local(pcbinfo,
sin.sin_addr, lport,
INPLOOKUP_WILDCARD);
if (t &&
((t->inp_vflag &
INP_TIMEWAIT) == 0) &&
(so->so_type != SOCK_STREAM ||
ntohl(t->inp_faddr.s_addr) ==
INADDR_ANY) &&
(so->so_cred->cr_uid !=
t->inp_socket->so_cred->cr_uid))
return (EADDRINUSE);
}
}
t = in6_pcblookup_local(pcbinfo, &sin6->sin6_addr,
lport, wild);
if (t && (reuseport & ((t->inp_vflag & INP_TIMEWAIT) ?
intotw(t)->tw_so_options :
t->inp_socket->so_options)) == 0)
return (EADDRINUSE);
if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0 &&
IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
struct sockaddr_in sin;
in6_sin6_2_sin(&sin, sin6);
t = in_pcblookup_local(pcbinfo, sin.sin_addr,
lport, wild);
if (t && t->inp_vflag & INP_TIMEWAIT) {
if ((reuseport &
intotw(t)->tw_so_options) == 0 &&
(ntohl(t->inp_laddr.s_addr) !=
INADDR_ANY || ((inp->inp_vflag &
INP_IPV6PROTO) ==
(t->inp_vflag & INP_IPV6PROTO))))
return (EADDRINUSE);
}
else if (t &&
(reuseport & t->inp_socket->so_options)
== 0 && (ntohl(t->inp_laddr.s_addr) !=
INADDR_ANY || INP_SOCKAF(so) ==
INP_SOCKAF(t->inp_socket)))
return (EADDRINUSE);
}
}
inp->in6p_laddr = sin6->sin6_addr;
}
if (lport == 0) {
int e;
if ((e = in6_pcbsetport(&inp->in6p_laddr, inp, cred)) != 0)
return (e);
}
else {
inp->inp_lport = lport;
if (in_pcbinshash(inp) != 0) {
inp->in6p_laddr = in6addr_any;
inp->inp_lport = 0;
return (EAGAIN);
}
}
return (0);
}
/*
* Transform old in6_pcbconnect() into an inner subroutine for new
* in6_pcbconnect(): Do some validity-checking on the remote
* address (in mbuf 'nam') and then determine local host address
* (i.e., which interface) to use to access that remote host.
*
* This preserves definition of in6_pcbconnect(), while supporting a
* slightly different version for T/TCP. (This is more than
* a bit of a kludge, but cleaning up the internal interfaces would
* have forced minor changes in every protocol).
*/
int
in6_pcbladdr(inp, nam, plocal_addr6)
register struct inpcb *inp;
struct sockaddr *nam;
struct in6_addr **plocal_addr6;
{
register struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
struct ifnet *ifp = NULL;
int error = 0;
if (nam->sa_len != sizeof (*sin6))
return (EINVAL);
if (sin6->sin6_family != AF_INET6)
return (EAFNOSUPPORT);
if (sin6->sin6_port == 0)
return (EADDRNOTAVAIL);
INP_INFO_WLOCK_ASSERT(inp->inp_pcbinfo);
INP_LOCK_ASSERT(inp);
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, inp, &ifp) != 0)
return EINVAL;
if (in6_ifaddr) {
/*
* If the destination address is UNSPECIFIED addr,
* use the loopback addr, e.g ::1.
*/
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
sin6->sin6_addr = in6addr_loopback;
}
{
/*
* XXX: in6_selectsrc might replace the bound local address
* with the address specified by setsockopt(IPV6_PKTINFO).
* Is it the intended behavior?
*/
*plocal_addr6 = in6_selectsrc(sin6, inp->in6p_outputopts,
inp->in6p_moptions, NULL,
&inp->in6p_laddr, &error);
if (*plocal_addr6 == 0) {
if (error == 0)
error = EADDRNOTAVAIL;
return (error);
}
/*
* Don't do pcblookup call here; return interface in
* plocal_addr6
* and exit to caller, that will do the lookup.
*/
}
return (0);
}
/*
* Outer subroutine:
* Connect from a socket to a specified address.
* Both address and port must be specified in argument sin.
* If don't have a local address for this socket yet,
* then pick one.
*/
int
in6_pcbconnect(inp, nam, cred)
register struct inpcb *inp;
struct sockaddr *nam;
struct ucred *cred;
{
struct in6_addr *addr6;
register struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)nam;
int error;
INP_INFO_WLOCK_ASSERT(inp->inp_pcbinfo);
INP_LOCK_ASSERT(inp);
/*
* Call inner routine, to assign local interface address.
* in6_pcbladdr() may automatically fill in sin6_scope_id.
*/
if ((error = in6_pcbladdr(inp, nam, &addr6)) != 0)
return (error);
if (in6_pcblookup_hash(inp->inp_pcbinfo, &sin6->sin6_addr,
sin6->sin6_port,
IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)
? addr6 : &inp->in6p_laddr,
inp->inp_lport, 0, NULL) != NULL) {
return (EADDRINUSE);
}
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
if (inp->inp_lport == 0) {
error = in6_pcbbind(inp, (struct sockaddr *)0, cred);
if (error)
return (error);
}
inp->in6p_laddr = *addr6;
}
inp->in6p_faddr = sin6->sin6_addr;
inp->inp_fport = sin6->sin6_port;
/* update flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
inp->in6p_flowinfo &= ~IPV6_FLOWLABEL_MASK;
if (inp->in6p_flags & IN6P_AUTOFLOWLABEL)
inp->in6p_flowinfo |=
(htonl(ip6_randomflowlabel()) & IPV6_FLOWLABEL_MASK);
in_pcbrehash(inp);
#ifdef IPSEC
if (inp->inp_socket->so_type == SOCK_STREAM)
ipsec_pcbconn(inp->inp_sp);
#endif
return (0);
}
void
in6_pcbdisconnect(inp)
struct inpcb *inp;
{
INP_INFO_WLOCK_ASSERT(inp->inp_pcbinfo);
INP_LOCK_ASSERT(inp);
bzero((caddr_t)&inp->in6p_faddr, sizeof(inp->in6p_faddr));
inp->inp_fport = 0;
/* clear flowinfo - draft-itojun-ipv6-flowlabel-api-00 */
inp->in6p_flowinfo &= ~IPV6_FLOWLABEL_MASK;
in_pcbrehash(inp);
#ifdef IPSEC
ipsec_pcbdisconn(inp->inp_sp);
#endif
if (inp->inp_socket->so_state & SS_NOFDREF)
in6_pcbdetach(inp);
}
void
in6_pcbdetach(inp)
struct inpcb *inp;
{
struct socket *so = inp->inp_socket;
struct inpcbinfo *ipi = inp->inp_pcbinfo;
INP_INFO_WLOCK_ASSERT(inp->inp_pcbinfo);
INP_LOCK_ASSERT(inp);
#if defined(IPSEC) || defined(FAST_IPSEC)
if (inp->in6p_sp != NULL)
ipsec6_delete_pcbpolicy(inp);
#endif /* IPSEC */
inp->inp_gencnt = ++ipi->ipi_gencnt;
in_pcbremlists(inp);
if (so) {
ACCEPT_LOCK();
SOCK_LOCK(so);
so->so_pcb = NULL;
sotryfree(so);
}
ip6_freepcbopts(inp->in6p_outputopts);
ip6_freemoptions(inp->in6p_moptions);
/* Check and free IPv4 related resources in case of mapped addr */
if (inp->inp_options)
(void)m_free(inp->inp_options);
ip_freemoptions(inp->inp_moptions);
inp->inp_vflag = 0;
INP_LOCK_DESTROY(inp);
uma_zfree(ipi->ipi_zone, inp);
}
struct sockaddr *
in6_sockaddr(port, addr_p)
in_port_t port;
struct in6_addr *addr_p;
{
struct sockaddr_in6 *sin6;
MALLOC(sin6, struct sockaddr_in6 *, sizeof *sin6, M_SONAME, M_WAITOK);
bzero(sin6, sizeof *sin6);
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_port = port;
sin6->sin6_addr = *addr_p;
if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
sin6->sin6_scope_id = ntohs(sin6->sin6_addr.s6_addr16[1]);
else
sin6->sin6_scope_id = 0; /*XXX*/
if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
sin6->sin6_addr.s6_addr16[1] = 0;
return (struct sockaddr *)sin6;
}
struct sockaddr *
in6_v4mapsin6_sockaddr(port, addr_p)
in_port_t port;
struct in_addr *addr_p;
{
struct sockaddr_in sin;
struct sockaddr_in6 *sin6_p;
bzero(&sin, sizeof sin);
sin.sin_family = AF_INET;
sin.sin_len = sizeof(sin);
sin.sin_port = port;
sin.sin_addr = *addr_p;
MALLOC(sin6_p, struct sockaddr_in6 *, sizeof *sin6_p, M_SONAME,
M_WAITOK);
in6_sin_2_v4mapsin6(&sin, sin6_p);
return (struct sockaddr *)sin6_p;
}
/*
* The calling convention of in6_setsockaddr() and in6_setpeeraddr() was
* modified to match the pru_sockaddr() and pru_peeraddr() entry points
* in struct pr_usrreqs, so that protocols can just reference then directly
* without the need for a wrapper function. The socket must have a valid
* (i.e., non-nil) PCB, but it should be impossible to get an invalid one
* except through a kernel programming error, so it is acceptable to panic
* (or in this case trap) if the PCB is invalid. (Actually, we don't trap
* because there actually /is/ a programming error somewhere... XXX)
*/
int
in6_setsockaddr(so, nam)
struct socket *so;
struct sockaddr **nam;
{
int s;
register struct inpcb *inp;
struct in6_addr addr;
in_port_t port;
s = splnet();
inp = sotoinpcb(so);
if (!inp) {
splx(s);
return EINVAL;
}
port = inp->inp_lport;
addr = inp->in6p_laddr;
splx(s);
*nam = in6_sockaddr(port, &addr);
return 0;
}
int
in6_setpeeraddr(so, nam)
struct socket *so;
struct sockaddr **nam;
{
int s;
struct inpcb *inp;
struct in6_addr addr;
in_port_t port;
s = splnet();
inp = sotoinpcb(so);
if (!inp) {
splx(s);
return EINVAL;
}
port = inp->inp_fport;
addr = inp->in6p_faddr;
splx(s);
*nam = in6_sockaddr(port, &addr);
return 0;
}
int
in6_mapped_sockaddr(struct socket *so, struct sockaddr **nam)
{
struct inpcb *inp = sotoinpcb(so);
int error;
if (inp == NULL)
return EINVAL;
if ((inp->inp_vflag & (INP_IPV4 | INP_IPV6)) == INP_IPV4) {
error = in_setsockaddr(so, nam, &tcbinfo);
if (error == 0)
in6_sin_2_v4mapsin6_in_sock(nam);
} else {
/* scope issues will be handled in in6_setsockaddr(). */
error = in6_setsockaddr(so, nam);
}
return error;
}
int
in6_mapped_peeraddr(struct socket *so, struct sockaddr **nam)
{
struct inpcb *inp = sotoinpcb(so);
int error;
if (inp == NULL)
return EINVAL;
if ((inp->inp_vflag & (INP_IPV4 | INP_IPV6)) == INP_IPV4) {
error = in_setpeeraddr(so, nam, &tcbinfo);
if (error == 0)
in6_sin_2_v4mapsin6_in_sock(nam);
} else
/* scope issues will be handled in in6_setpeeraddr(). */
error = in6_setpeeraddr(so, nam);
return error;
}
/*
* Pass some notification to all connections of a protocol
* associated with address dst. The local address and/or port numbers
* may be specified to limit the search. The "usual action" will be
* taken, depending on the ctlinput cmd. The caller must filter any
* cmds that are uninteresting (e.g., no error in the map).
* Call the protocol specific routine (if any) to report
* any errors for each matching socket.
*
* Must be called at splnet.
*/
void
in6_pcbnotify(pcbinfo, dst, fport_arg, src, lport_arg, cmd, cmdarg, notify)
struct inpcbinfo *pcbinfo;
struct sockaddr *dst;
const struct sockaddr *src;
u_int fport_arg, lport_arg;
int cmd;
void *cmdarg;
struct inpcb *(*notify) __P((struct inpcb *, int));
{
struct inpcbhead *head;
struct inpcb *inp, *ninp;
struct sockaddr_in6 sa6_src, *sa6_dst;
u_short fport = fport_arg, lport = lport_arg;
u_int32_t flowinfo;
int errno, s;
if ((unsigned)cmd >= PRC_NCMDS || dst->sa_family != AF_INET6)
return;
sa6_dst = (struct sockaddr_in6 *)dst;
if (IN6_IS_ADDR_UNSPECIFIED(&sa6_dst->sin6_addr))
return;
/*
* note that src can be NULL when we get notify by local fragmentation.
*/
sa6_src = (src == NULL) ? sa6_any : *(const struct sockaddr_in6 *)src;
flowinfo = sa6_src.sin6_flowinfo;
/*
* Redirects go to all references to the destination,
* and use in6_rtchange to invalidate the route cache.
* Dead host indications: also use in6_rtchange to invalidate
* the cache, and deliver the error to all the sockets.
* Otherwise, if we have knowledge of the local port and address,
* deliver only to that socket.
*/
if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
fport = 0;
lport = 0;
bzero((caddr_t)&sa6_src.sin6_addr, sizeof(sa6_src.sin6_addr));
if (cmd != PRC_HOSTDEAD)
notify = in6_rtchange;
}
errno = inet6ctlerrmap[cmd];
s = splnet();
head = pcbinfo->listhead;
INP_INFO_WLOCK(pcbinfo);
for (inp = LIST_FIRST(head); inp != NULL; inp = ninp) {
INP_LOCK(inp);
ninp = LIST_NEXT(inp, inp_list);
if ((inp->inp_vflag & INP_IPV6) == 0) {
INP_UNLOCK(inp);
continue;
}
/*
* If the error designates a new path MTU for a destination
* and the application (associated with this socket) wanted to
* know the value, notify. Note that we notify for all
* disconnected sockets if the corresponding application
* wanted. This is because some UDP applications keep sending
* sockets disconnected.
* XXX: should we avoid to notify the value to TCP sockets?
*/
if (cmd == PRC_MSGSIZE && (inp->inp_flags & IN6P_MTU) != 0 &&
(IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) ||
IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, &sa6_dst->sin6_addr))) {
ip6_notify_pmtu(inp, (struct sockaddr_in6 *)dst,
(u_int32_t *)cmdarg);
}
/*
* Detect if we should notify the error. If no source and
* destination ports are specifed, but non-zero flowinfo and
* local address match, notify the error. This is the case
* when the error is delivered with an encrypted buffer
* by ESP. Otherwise, just compare addresses and ports
* as usual.
*/
if (lport == 0 && fport == 0 && flowinfo &&
inp->inp_socket != NULL &&
flowinfo == (inp->in6p_flowinfo & IPV6_FLOWLABEL_MASK) &&
IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, &sa6_src.sin6_addr))
goto do_notify;
else if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
&sa6_dst->sin6_addr) ||
inp->inp_socket == 0 ||
(lport && inp->inp_lport != lport) ||
(!IN6_IS_ADDR_UNSPECIFIED(&sa6_src.sin6_addr) &&
!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
&sa6_src.sin6_addr)) ||
(fport && inp->inp_fport != fport)) {
INP_UNLOCK(inp);
continue;
}
do_notify:
if (notify) {
if ((*notify)(inp, errno))
INP_UNLOCK(inp);
} else
INP_UNLOCK(inp);
}
INP_INFO_WUNLOCK(pcbinfo);
splx(s);
}
/*
* Lookup a PCB based on the local address and port.
*/
struct inpcb *
in6_pcblookup_local(pcbinfo, laddr, lport_arg, wild_okay)
struct inpcbinfo *pcbinfo;
struct in6_addr *laddr;
u_int lport_arg;
int wild_okay;
{
register struct inpcb *inp;
int matchwild = 3, wildcard;
u_short lport = lport_arg;
if (!wild_okay) {
struct inpcbhead *head;
/*
* Look for an unconnected (wildcard foreign addr) PCB that
* matches the local address and port we're looking for.
*/
head = &pcbinfo->hashbase[INP_PCBHASH(INADDR_ANY, lport, 0,
pcbinfo->hashmask)];
LIST_FOREACH(inp, head, inp_hash) {
if ((inp->inp_vflag & INP_IPV6) == 0)
continue;
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
inp->inp_lport == lport) {
/*
* Found.
*/
return (inp);
}
}
/*
* Not found.
*/
return (NULL);
} else {
struct inpcbporthead *porthash;
struct inpcbport *phd;
struct inpcb *match = NULL;
/*
* Best fit PCB lookup.
*
* First see if this local port is in use by looking on the
* port hash list.
*/
porthash = &pcbinfo->porthashbase[INP_PCBPORTHASH(lport,
pcbinfo->porthashmask)];
LIST_FOREACH(phd, porthash, phd_hash) {
if (phd->phd_port == lport)
break;
}
if (phd != NULL) {
/*
* Port is in use by one or more PCBs. Look for best
* fit.
*/
LIST_FOREACH(inp, &phd->phd_pcblist, inp_portlist) {
wildcard = 0;
if ((inp->inp_vflag & INP_IPV6) == 0)
continue;
if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr))
wildcard++;
if (!IN6_IS_ADDR_UNSPECIFIED(
&inp->in6p_laddr)) {
if (IN6_IS_ADDR_UNSPECIFIED(laddr))
wildcard++;
else if (!IN6_ARE_ADDR_EQUAL(
&inp->in6p_laddr, laddr))
continue;
} else {
if (!IN6_IS_ADDR_UNSPECIFIED(laddr))
wildcard++;
}
if (wildcard < matchwild) {
match = inp;
matchwild = wildcard;
if (matchwild == 0) {
break;
}
}
}
}
return (match);
}
}
void
in6_pcbpurgeif0(head, ifp)
struct in6pcb *head;
struct ifnet *ifp;
{
struct in6pcb *in6p;
struct ip6_moptions *im6o;
struct in6_multi_mship *imm, *nimm;
for (in6p = head; in6p != NULL; in6p = LIST_NEXT(in6p, inp_list)) {
im6o = in6p->in6p_moptions;
if ((in6p->inp_vflag & INP_IPV6) &&
im6o) {
/*
* Unselect the outgoing interface if it is being
* detached.
*/
if (im6o->im6o_multicast_ifp == ifp)
im6o->im6o_multicast_ifp = NULL;
/*
* Drop multicast group membership if we joined
* through the interface being detached.
* XXX controversial - is it really legal for kernel
* to force this?
*/
for (imm = im6o->im6o_memberships.lh_first;
imm != NULL; imm = nimm) {
nimm = imm->i6mm_chain.le_next;
if (imm->i6mm_maddr->in6m_ifp == ifp) {
LIST_REMOVE(imm, i6mm_chain);
in6_delmulti(imm->i6mm_maddr);
free(imm, M_IPMADDR);
}
}
}
}
}
/*
* Check for alternatives when higher level complains
* about service problems. For now, invalidate cached
* routing information. If the route was created dynamically
* (by a redirect), time to try a default gateway again.
*/
void
in6_losing(in6p)
struct inpcb *in6p;
{
/*
* We don't store route pointers in the routing table anymore
*/
return;
}
/*
* After a routing change, flush old routing
* and allocate a (hopefully) better one.
*/
struct inpcb *
in6_rtchange(inp, errno)
struct inpcb *inp;
int errno;
{
/*
* We don't store route pointers in the routing table anymore
*/
return inp;
}
/*
* Lookup PCB in hash list.
*/
struct inpcb *
in6_pcblookup_hash(pcbinfo, faddr, fport_arg, laddr, lport_arg, wildcard, ifp)
struct inpcbinfo *pcbinfo;
struct in6_addr *faddr, *laddr;
u_int fport_arg, lport_arg;
int wildcard;
struct ifnet *ifp;
{
struct inpcbhead *head;
register struct inpcb *inp;
u_short fport = fport_arg, lport = lport_arg;
int faith;
if (faithprefix_p != NULL)
faith = (*faithprefix_p)(laddr);
else
faith = 0;
/*
* First look for an exact match.
*/
head = &pcbinfo->hashbase[INP_PCBHASH(faddr->s6_addr32[3] /* XXX */,
lport, fport,
pcbinfo->hashmask)];
LIST_FOREACH(inp, head, inp_hash) {
if ((inp->inp_vflag & INP_IPV6) == 0)
continue;
if (IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, faddr) &&
IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, laddr) &&
inp->inp_fport == fport &&
inp->inp_lport == lport) {
/*
* Found.
*/
return (inp);
}
}
if (wildcard) {
struct inpcb *local_wild = NULL;
head = &pcbinfo->hashbase[INP_PCBHASH(INADDR_ANY, lport, 0,
pcbinfo->hashmask)];
LIST_FOREACH(inp, head, inp_hash) {
if ((inp->inp_vflag & INP_IPV6) == 0)
continue;
if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr) &&
inp->inp_lport == lport) {
if (faith && (inp->inp_flags & INP_FAITH) == 0)
continue;
if (IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
laddr))
return (inp);
else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr))
local_wild = inp;
}
}
return (local_wild);
}
/*
* Not found.
*/
return (NULL);
}
void
init_sin6(struct sockaddr_in6 *sin6, struct mbuf *m)
{
struct ip6_hdr *ip;
ip = mtod(m, struct ip6_hdr *);
bzero(sin6, sizeof(*sin6));
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_family = AF_INET6;
sin6->sin6_addr = ip->ip6_src;
if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
sin6->sin6_addr.s6_addr16[1] = 0;
sin6->sin6_scope_id =
(m->m_pkthdr.rcvif && IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr))
? m->m_pkthdr.rcvif->if_index : 0;
return;
}