freebsd-skq/sys/dev/ed/if_ed98.h
Yoshihiro Takahashi 82583dd564 - Fixed the conversion to bus_space interface.
- Added PC-98 Cbus devices support.
  The original patch is submitted by chi@bd.mbn.or.jp (Chiharu Shibata)
- Removed old ed driver.
2000-08-17 12:15:45 +00:00

112 lines
3.7 KiB
C

/*
* Copyright (c) KATO Takenori, 1996. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* PC-9801 specific definitions for DP8390/SMC8216 NICs.
*/
#ifndef PC98
#error Why you include if_ed98.h?
#endif
/*
* Vendor types
*/
#define ED_VENDOR_MISC 0xf0 /* others */
/*
* Card types.
*
* Type Card
* 0x00 Allied Telesis CenterCom LA-98-T / SMC EtherEZ98.
* 0x10 ** RESERVED **
* 0x20 PLANET SMART COM 98 EN-2298 / ELECOM LANEED LD-BDN[123]A.
* 0x30 MELCO EGY-98 / Contec C-NET(98)E-A/L-A.
* 0x40 MELCO LGY-98, IND-SP, IND-SS / MACNICA NE2098(XXX).
* 0x50 ICM DT-ET-25, DT-ET-T5, IF-2766ET, IF-2771ET /
* D-Link DE-298P{T,CAT}, DE-298{T,TP,CAT}.
* 0x60 Allied Telesis SIC-98.
* 0x70 ** RESERVED **
* 0x80 NEC PC-9801-108.
* 0x90 IO-DATA LA-98 / NEC PC-9801-77.
* 0xa0 Contec C-NET(98).
* 0xb0 Contec C-NET(98)E/L.
* 0xc0 ** RESERVED **
* 0xd0 Networld EC/EP-98X.
* 0xe0 Soliton SB-9801 / Fujikura FN-9801 / Networld EC/EP-98S.
* 0xf0 NextCom NC5098.
*/
#define ED_TYPE98_BASE 0x80
#define ED_TYPE98_GENERIC 0x80
#define ED_TYPE98_BDN 0x82
#define ED_TYPE98_EGY 0x83
#define ED_TYPE98_LGY 0x84
#define ED_TYPE98_ICM 0x85
#define ED_TYPE98_SIC 0x86
#define ED_TYPE98_108 0x88
#define ED_TYPE98_LA98 0x89
#define ED_TYPE98_CNET98 0x8a
#define ED_TYPE98_CNET98EL 0x8b
#define ED_TYPE98_NW98X 0x8d
#define ED_TYPE98_SB98 0x8e
#define ED_TYPE98_NC5098 0x8f
#define ED_TYPE98(x) (((x & 0xffff0000) >> 20) | ED_TYPE98_BASE)
#define ED_TYPE98SUB(x) ((x & 0xf0000) >> 16)
/*
* Definitions for C-NET(98) serise
*/
/*
* Initial Register(on board JP1)
*/
#define ED_CNET98_INIT 0xaaed /* default */
#define ED_CNET98_INIT2 0x55ed /* another setting */
#define ED_CNET98EL_PAGE_OFFSET 0x0000 /* Page offset for NIC access to mem */
/*
* Definitions for Soliton SB-9801
*/
/*
* I/O port select register
*/
#define ED_SB98_IO_INHIBIT 0x0040 /* XXX - shares printer port! */
/*
* Definitions for SMC EtherEZ98(SMC8498BTA)
*/
#define ED_EZ98_NIC_OFFSET 0x100 /* I/O base offset to NIC */
#define ED_EZ98_ASIC_OFFSET 0 /* I/O base offset to ASIC */
/*
* XXX - The I/O address range is fragmented in the EtherEZ98;
* it occupies 16*2 I/O addresses, by the way.
*/
#define ED_EZ98_IO_PORTS 16 /* # of i/o addresses used */