freebsd-skq/sys/pci
Bill Paul da6e4b77bb When checking the device code in the probe routine, leave the chip in
16-bit mode. Technically, pcn_probe() is destructive because once the
chip goes into 32-bit mode, the only way to get it out again is a
hardware reset. And once the device is in 32-bit mode, the lnc driver
won't be able to talk to it. So if pcn_probe() is called before the
lnc probe routine, and pcn_probe() rejects the chip as one it doesn't
support, the lnc driver will be SOL.

I don't like this. I think it's a design flaw that you can't switch
the chip out of 32-bit mode once it's selected. The only 'right'
solution is for the pcn driver to support all of the PCI devices
in 32-bit mode, however I don't have samples of all the PCnet series
cards for testing.
2000-11-16 19:56:09 +00:00
..
agp_ali.c A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
agp_amd.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
agp_i810.c Added support for i815. 2000-10-16 08:53:00 +00:00
agp_if.m A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
agp_intel.c Add i815 host to PCI bridge ID 2000-10-20 16:05:47 +00:00
agp_sis.c A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
agp_via.c A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
agp.c Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
agppriv.h Add support for Intel's i810 chipset with integrated graphics. An 2000-07-12 10:13:07 +00:00
agpreg.h Add support for Intel's i810 chipset with integrated graphics. An 2000-07-12 10:13:07 +00:00
agpvar.h A driver for programming the AGP hardware. This is only very lightly 2000-06-09 16:04:30 +00:00
alpm.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
amd.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
amd.h Back out the previous change to the queue(3) interface. 2000-05-26 02:09:24 +00:00
cy_pci.c Make LINT compile again. 2000-09-16 18:46:05 +00:00
cy_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
dc21040reg.h s/Id/FreeBSD/ 1999-08-09 12:52:49 +00:00
ide_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_ar_p.c Ahhrggg. Put the test for the compat shims AFTER the file that includes 2000-03-27 20:24:02 +00:00
if_dc.c Add support for the Accton EN2242 MiniPCI adapter. This is just an 2000-11-14 19:35:22 +00:00
if_dcreg.h Add support for the Accton EN2242 MiniPCI adapter. This is just an 2000-11-14 19:35:22 +00:00
if_de.c Convert the de driver into a loadable module. Still missing is an 2000-10-31 01:25:10 +00:00
if_devar.h Use bus_space for all register accesses. 2000-05-13 18:47:24 +00:00
if_en_pci.c newbusify the en atm driver. 2000-11-07 09:31:28 +00:00
if_fxp.c Make usual 1-line cardbus support modification. 2000-10-22 06:41:46 +00:00
if_fxpreg.h Add the PCI device ID for the on-board ethernet controllers on the 2000-09-21 20:01:57 +00:00
if_fxpvar.h Removed NetBSD support, which bit-rotted long ago. 2000-09-18 21:12:19 +00:00
if_mn.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
if_pcn.c When checking the device code in the probe routine, leave the chip in 2000-11-16 19:56:09 +00:00
if_pcnreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_rl.c Fix 8-bit EEPROM breakage: compare against 0x8129, not 8129. 2000-11-01 23:56:46 +00:00
if_rlreg.h Fix support for cardbus cards: 2000-10-30 07:54:38 +00:00
if_sf.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
if_sfreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_sis.c Fix a couple of cases where I tried to release the I/O space resource twice 2000-11-02 00:00:30 +00:00
if_sisreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_sk.c Change MEXTADD usage to pass the two new arguments. 2000-11-11 23:08:22 +00:00
if_skreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_sr_p.c Ahhrggg. Put the test for the compat shims AFTER the file that includes 2000-03-27 20:24:02 +00:00
if_ste.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
if_stereg.h Use device_get_nameunit(dev) as the mutex string when calling 2000-10-13 18:35:49 +00:00
if_ti.c Change MEXTADD usage to pass the two new arguments. 2000-11-11 23:08:22 +00:00
if_tireg.h (Introduce something sitting in my repo for 3 weeks now...) 2000-10-21 00:13:35 +00:00
if_tl.c Fix a couple of cases where I tried to release the I/O space resource twice 2000-11-02 00:00:30 +00:00
if_tlreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_tx.c Add missing delay after card reset. 2000-11-09 17:25:49 +00:00
if_txvar.h Added support for SMC9432BTX cards. 2000-06-21 19:19:49 +00:00
if_vr.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
if_vrreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_wb.c Change MEXTADD usage to pass the two new arguments. 2000-11-11 23:08:22 +00:00
if_wbreg.h First round of converting network drivers from spls to mutexes. This 2000-10-13 17:54:19 +00:00
if_wx.c Very early and very *very* lightly tested support for LIVENGOOD chipset 2000-10-16 23:08:45 +00:00
if_wxreg.h Very early and very *very* lightly tested support for LIVENGOOD chipset 2000-10-16 23:08:45 +00:00
if_wxvar.h Very early and very *very* lightly tested support for LIVENGOOD chipset 2000-10-16 23:08:45 +00:00
if_xl.c add support for 3Com 3c575TX Fast Etherlink XL. 2000-11-02 06:49:38 +00:00
if_xlreg.h add support for 3Com 3c575TX Fast Etherlink XL. 2000-11-02 06:49:38 +00:00
intpm.c Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
intpmreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
isp_pci.c Whoops! Forgot to commit this when I committed the other (turnin on locks) 2000-10-25 04:40:49 +00:00
locate.pl use warnings 2000-06-27 22:41:12 +00:00
meteor_reg.h Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
meteor.c Ahhrggg. Put the test for the compat shims AFTER the file that includes 2000-03-27 20:24:02 +00:00
ncr.c Convert all users of fldoff() to offsetof(). fldoff() is bad 2000-10-27 11:45:49 +00:00
ncrreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ohci_pci.c Weaken a bogus dependency on <sys/proc.h> in <sys/buf.h> by #ifdef'ing 2000-10-29 14:54:55 +00:00
pci_compat.c - Remove the inthand2_t type and use the equivalent driver_intr_t type from 2000-09-13 18:33:25 +00:00
pci_if.m * Factor out the object system from new-bus so that it can be used by 2000-04-08 14:17:18 +00:00
pci.c fix warning compile error about unused variable 2000-10-29 10:07:43 +00:00
pcib_if.m Forgot to commit this last night. 2000-10-16 19:43:44 +00:00
pcic_p.c Spelling police in a comment: Defalut -> Default. 2000-09-29 21:14:05 +00:00
pcic_p.h Add TI-1031 id. It doesn't work yet, but it is nice to have it. 2000-08-29 04:40:17 +00:00
pcireg.h Add definition for PCIS_SERIALBUS_SMBUS PCI device subclass. 2000-10-02 00:41:43 +00:00
pcisupport.c add a couple ESS Technology products(pci device id only). 2000-11-08 14:43:40 +00:00
pcivar.h Get out the roto-rooter and clean up the abuse of nexus ivars by the 2000-09-28 00:37:32 +00:00
scsiiom.c Add $FreeBSD$ 2000-05-01 20:32:07 +00:00
simos.c Separate the struct bio related stuff out of <sys/buf.h> into 2000-05-05 09:59:14 +00:00
simos.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ti_fw2.h Use a custom Tigon 2 firmware image, hopefully temporarily. This is 2000-07-26 23:55:34 +00:00
ti_fw.h Update the Tigon driver to support 1000baseTX gigE over copper AceNIC 2000-07-20 22:24:43 +00:00
uhci_pci.c Weaken a bogus dependency on <sys/proc.h> in <sys/buf.h> by #ifdef'ing 2000-10-29 14:54:55 +00:00
xmaciireg.h Reoganize/update the SysKonnect driver: 2000-04-22 02:16:41 +00:00
xrpu.c Do not depend on FreeBSD 2.2 compatability defines. 2000-05-28 16:18:58 +00:00