freebsd-skq/etc/etc.arm/ttys
gjb b7bcf4a7d1 Enable ttyu1, ttyu2, ttyu3 for arm installations.
This should make all consoles available, whether it
is VGA, HDMI, serial, or JTAG, but more importantly
enables all consoles when ttyu0 is not predictable.
For example, the Pandaboard ES apparently has three
consoles available, but the DB9/RS232 serial port is
ttyu2, so not available by default after the system
boots.

MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2015-06-21 19:50:02 +00:00

50 lines
2.0 KiB
Plaintext

#
# $FreeBSD$
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs. Common entries for the
# various columns include:
#
# name The name of the terminal device.
#
# getty The program to start running on the terminal. Typically a
# getty program, as the name implies. Other common entries
# include none, when no getty is needed, and xdm, to start the
# X Window System.
#
# type The initial terminal type for this port. For hardwired
# terminal lines, this will contain the type of terminal used.
# For virtual consoles, the correct type is typically xterm.
# Other common values include dialup for incoming modem ports, and
# unknown when the terminal type cannot be predetermined.
#
# status Must be on or off. If on, init will run the getty program on
# the specified port. If the word "secure" appears, this tty
# allows root login.
#
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none unknown off secure
#
ttyv0 "/usr/libexec/getty Pc" xterm onifconsole secure
# Virtual terminals
ttyv1 "/usr/libexec/getty Pc" xterm off secure
ttyv2 "/usr/libexec/getty Pc" xterm off secure
ttyv3 "/usr/libexec/getty Pc" xterm off secure
ttyv4 "/usr/libexec/getty Pc" xterm off secure
ttyv5 "/usr/libexec/getty Pc" xterm off secure
ttyv6 "/usr/libexec/getty Pc" xterm off secure
ttyv7 "/usr/libexec/getty Pc" xterm off secure
#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure
# Dumb console
dcons "/usr/libexec/getty std.9600" vt100 off secure