d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
62cba400a3
freebsd-skq/sys/kern/subr_blist.c
alc c7eb020649 Modify blst_leaf_alloc to take only the cursor argument. 
Modify blst_leaf_alloc to find allocations that cross the boundary between
one leaf node and the next when those two leaves descend from the same
meta node.

Update the hint field for leaves so that it represents a bound on how
large an allocation can begin in that leaf, where it currently represents
a bound on how large an allocation can be found within the boundaries of
the leaf.

The first phase of blst_leaf_alloc currently shrinks sequences of
consecutive 1-bits in mask until each has been shrunken by count-1 bits,
so that any bits remaining show where an allocation can begin, or until
all the bits have disappeared, in which case the allocation fails. This
change amends that so that the high-order bit is copied, as if, when the
last block was free, it was followed by an endless stream of free
blocks. It also amends the early stopping condition, so that the shrinking
of 1-sequences stops early when there are none, or there is only one
unbounded one remaining.

The search for the first set bit is unchanged, and the code path
thereafter is mostly unchanged unless the first set bit is in a position
that makes some of those copied sign bits matter. In that case, we look
for a next leaf, and at what blocks it can provide, to see if a
cross-boundary allocation is possible.

The hint is updated on a successful allocation that clears the last bit,
but it not updated on a failed allocation that leaves the last bit
set. So, as long as the last block is free, the hint value for the leaf is
large. As long as the last block is free, and there's a next leaf, a large
allocation can begin here, perhaps. A stricter rule than this would mean
that allocations and frees in one leaf could require hint updates to the
preceding leaf, and this change seeks to leave the freeing code
unmodified.

Define BLIST_BMAP_MASK, and use it for bit masking in blst_leaf_free and
blist_leaf_fill, as well as in blst_leaf_alloc.

Correct a panic message in blst_leaf_free.

Submitted by:	Doug Moore <dougm@rice.edu>
Reviewed by:	markj (an earlier version)
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D11819
2017-09-16 18:12:15 +00:00

1331 lines
34 KiB
C
Raw Blame History

/*-
* Copyright (c) 1998 Matthew Dillon. All Rights Reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* BLIST.C - Bitmap allocator/deallocator, using a radix tree with hinting
*
* This module implements a general bitmap allocator/deallocator. The
* allocator eats around 2 bits per 'block'. The module does not
* try to interpret the meaning of a 'block' other than to return
* SWAPBLK_NONE on an allocation failure.
*
* A radix tree controls access to pieces of the bitmap, and includes
* auxiliary information at each interior node about the availabilty of
* contiguous free blocks in the subtree rooted at that node. Two radix
* constants are involved: one for the size of the bitmaps contained in the
* leaf nodes (BLIST_BMAP_RADIX), and one for the number of descendents of
* each of the meta (interior) nodes (BLIST_META_RADIX). Each subtree is
* associated with a range of blocks. The root of any subtree stores a
* hint field that defines an upper bound on the size of the largest
* allocation that can begin in the associated block range. A hint is an
* upper bound on a potential allocation, but not necessarily a tight upper
* bound.
*
* The radix tree also implements two collapsed states for meta nodes:
* the ALL-ALLOCATED state and the ALL-FREE state. If a meta node is
* in either of these two states, all information contained underneath
* the node is considered stale. These states are used to optimize
* allocation and freeing operations.
*
* The hinting greatly increases code efficiency for allocations while
* the general radix structure optimizes both allocations and frees. The
* radix tree should be able to operate well no matter how much
* fragmentation there is and no matter how large a bitmap is used.
*
* The blist code wires all necessary memory at creation time. Neither
* allocations nor frees require interaction with the memory subsystem.
* The non-blocking features of the blist code are used in the swap code
* (vm/swap_pager.c).
*
* LAYOUT: The radix tree is laid out recursively using a
* linear array. Each meta node is immediately followed (laid out
* sequentially in memory) by BLIST_META_RADIX lower level nodes. This
* is a recursive structure but one that can be easily scanned through
* a very simple 'skip' calculation. In order to support large radixes,
* portions of the tree may reside outside our memory allocation. We
* handle this with an early-termination optimization (when bighint is
* set to -1) on the scan. The memory allocation is only large enough
* to cover the number of blocks requested at creation time even if it
* must be encompassed in larger root-node radix.
*
* NOTE: the allocator cannot currently allocate more than
* BLIST_BMAP_RADIX blocks per call. It will panic with 'allocation too
* large' if you try. This is an area that could use improvement. The
* radix is large enough that this restriction does not effect the swap
* system, though. Currently only the allocation code is affected by
* this algorithmic unfeature. The freeing code can handle arbitrary
* ranges.
*
* This code can be compiled stand-alone for debugging.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifdef _KERNEL
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/lock.h>
#include <sys/kernel.h>
#include <sys/blist.h>
#include <sys/malloc.h>
#include <sys/sbuf.h>
#include <sys/proc.h>
#include <sys/mutex.h>
#else
#ifndef BLIST_NO_DEBUG
#define BLIST_DEBUG
#endif
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/sbuf.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <stdarg.h>
#include <stdbool.h>
#define bitcount64(x) __bitcount64((uint64_t)(x))
#define malloc(a,b,c) calloc(a, 1)
#define free(a,b) free(a)
static __inline int imax(int a, int b) { return (a > b ? a : b); }
#include <sys/blist.h>
void panic(const char *ctl, ...);
#endif
/*
* static support functions
*/
static daddr_t blst_leaf_alloc(blmeta_t *scan, daddr_t blk, int count);
static daddr_t blst_meta_alloc(blmeta_t *scan, daddr_t cursor, daddr_t count,
u_daddr_t radix);
static void blst_leaf_free(blmeta_t *scan, daddr_t relblk, int count);
static void blst_meta_free(blmeta_t *scan, daddr_t freeBlk, daddr_t count,
u_daddr_t radix);
static void blst_copy(blmeta_t *scan, daddr_t blk, daddr_t radix,
blist_t dest, daddr_t count);
static daddr_t blst_leaf_fill(blmeta_t *scan, daddr_t blk, int count);
static daddr_t blst_meta_fill(blmeta_t *scan, daddr_t allocBlk, daddr_t count,
u_daddr_t radix);
static daddr_t blst_radix_init(blmeta_t *scan, daddr_t radix, daddr_t count);
#ifndef _KERNEL
static void blst_radix_print(blmeta_t *scan, daddr_t blk, daddr_t radix,
int tab);
#endif
#ifdef _KERNEL
static MALLOC_DEFINE(M_SWAP, "SWAP", "Swap space");
#endif
_Static_assert(BLIST_BMAP_RADIX % BLIST_META_RADIX == 0,
"radix divisibility error");
#define BLIST_BMAP_MASK (BLIST_BMAP_RADIX - 1)
#define BLIST_META_MASK (BLIST_META_RADIX - 1)
/*
* For a subtree that can represent the state of up to 'radix' blocks, the
* number of leaf nodes of the subtree is L=radix/BLIST_BMAP_RADIX. If 'm'
* is short for BLIST_META_RADIX, then for a tree of height h with L=m**h
* leaf nodes, the total number of tree nodes is 1 + m + m**2 + ... + m**h,
* or, equivalently, (m**(h+1)-1)/(m-1). This quantity is called 'skip'
* in the 'meta' functions that process subtrees. Since integer division
* discards remainders, we can express this computation as
* skip = (m * m**h) / (m - 1)
* skip = (m * (radix / BLIST_BMAP_RADIX)) / (m - 1)
* and since m divides BLIST_BMAP_RADIX, we can simplify further to
* skip = (radix / (BLIST_BMAP_RADIX / m)) / (m - 1)
* skip = radix / ((BLIST_BMAP_RADIX / m) * (m - 1))
* so that simple integer division by a constant can safely be used for the
* calculation.
*/
static inline daddr_t
radix_to_skip(daddr_t radix)
{
return (radix /
((BLIST_BMAP_RADIX / BLIST_META_RADIX) * BLIST_META_MASK));
}
/*
* Use binary search, or a faster method, to find the 1 bit in a u_daddr_t.
* Assumes that the argument has only one bit set.
*/
static inline int
bitpos(u_daddr_t mask)
{
int hi, lo, mid;
switch (sizeof(mask)) {
#ifdef HAVE_INLINE_FFSLL
case sizeof(long long):
return (ffsll(mask) - 1);
#endif
default:
lo = 0;
hi = BLIST_BMAP_RADIX;
while (lo + 1 < hi) {
mid = (lo + hi) >> 1;
if ((mask >> mid) != 0)
lo = mid;
else
hi = mid;
}
return (lo);
}
}
/*
* blist_create() - create a blist capable of handling up to the specified
* number of blocks
*
* blocks - must be greater than 0
* flags - malloc flags
*
* The smallest blist consists of a single leaf node capable of
* managing BLIST_BMAP_RADIX blocks.
*/
blist_t
blist_create(daddr_t blocks, int flags)
{
blist_t bl;
daddr_t nodes, radix;
/*
* Calculate the radix field used for scanning.
*/
radix = BLIST_BMAP_RADIX;
while (radix < blocks) {
radix *= BLIST_META_RADIX;
}
nodes = 1 + blst_radix_init(NULL, radix, blocks);
bl = malloc(sizeof(struct blist), M_SWAP, flags);
if (bl == NULL)
return (NULL);
bl->bl_blocks = blocks;
bl->bl_radix = radix;
bl->bl_cursor = 0;
bl->bl_root = malloc(nodes * sizeof(blmeta_t), M_SWAP, flags);
if (bl->bl_root == NULL) {
free(bl, M_SWAP);
return (NULL);
}
blst_radix_init(bl->bl_root, radix, blocks);
#if defined(BLIST_DEBUG)
printf(
"BLIST representing %lld blocks (%lld MB of swap)"
", requiring %lldK of ram\n",
(long long)bl->bl_blocks,
(long long)bl->bl_blocks * 4 / 1024,
(long long)(nodes * sizeof(blmeta_t) + 1023) / 1024
);
printf("BLIST raw radix tree contains %lld records\n",
(long long)nodes);
#endif
return (bl);
}
void
blist_destroy(blist_t bl)
{
free(bl->bl_root, M_SWAP);
free(bl, M_SWAP);
}
/*
* blist_alloc() - reserve space in the block bitmap. Return the base
* of a contiguous region or SWAPBLK_NONE if space could
* not be allocated.
*/
daddr_t
blist_alloc(blist_t bl, daddr_t count)
{
daddr_t blk;
/*
* This loop iterates at most twice. An allocation failure in the
* first iteration leads to a second iteration only if the cursor was
* non-zero. When the cursor is zero, an allocation failure will
* reduce the hint, stopping further iterations.
*/
while (count <= bl->bl_root->bm_bighint) {
blk = blst_meta_alloc(bl->bl_root, bl->bl_cursor, count,
bl->bl_radix);
if (blk != SWAPBLK_NONE) {
bl->bl_cursor = blk + count;
if (bl->bl_cursor == bl->bl_blocks)
bl->bl_cursor = 0;
return (blk);
} else if (bl->bl_cursor != 0)
bl->bl_cursor = 0;
}
return (SWAPBLK_NONE);
}
/*
* blist_avail() - return the number of free blocks.
*/
daddr_t
blist_avail(blist_t bl)
{
if (bl->bl_radix == BLIST_BMAP_RADIX)
return (bitcount64(bl->bl_root->u.bmu_bitmap));
else
return (bl->bl_root->u.bmu_avail);
}
/*
* blist_free() - free up space in the block bitmap. Return the base
* of a contiguous region. Panic if an inconsistancy is
* found.
*/
void
blist_free(blist_t bl, daddr_t blkno, daddr_t count)
{
blst_meta_free(bl->bl_root, blkno, count, bl->bl_radix);
}
/*
* blist_fill() - mark a region in the block bitmap as off-limits
* to the allocator (i.e. allocate it), ignoring any
* existing allocations. Return the number of blocks
* actually filled that were free before the call.
*/
daddr_t
blist_fill(blist_t bl, daddr_t blkno, daddr_t count)
{
return (blst_meta_fill(bl->bl_root, blkno, count, bl->bl_radix));
}
/*
* blist_resize() - resize an existing radix tree to handle the
* specified number of blocks. This will reallocate
* the tree and transfer the previous bitmap to the new
* one. When extending the tree you can specify whether
* the new blocks are to left allocated or freed.
*/
void
blist_resize(blist_t *pbl, daddr_t count, int freenew, int flags)
{
blist_t newbl = blist_create(count, flags);
blist_t save = *pbl;
*pbl = newbl;
if (count > save->bl_blocks)
count = save->bl_blocks;
blst_copy(save->bl_root, 0, save->bl_radix, newbl, count);
/*
* If resizing upwards, should we free the new space or not?
*/
if (freenew && count < newbl->bl_blocks) {
blist_free(newbl, count, newbl->bl_blocks - count);
}
blist_destroy(save);
}
#ifdef BLIST_DEBUG
/*
* blist_print() - dump radix tree
*/
void
blist_print(blist_t bl)
{
printf("BLIST cursor = %08jx {\n", (uintmax_t)bl->bl_cursor);
blst_radix_print(bl->bl_root, 0, bl->bl_radix, 4);
printf("}\n");
}
#endif
static const u_daddr_t fib[] = {
1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597, 2584,
4181, 6765, 10946, 17711, 28657, 46368, 75025, 121393, 196418, 317811,
514229, 832040, 1346269, 2178309, 3524578,
};
/*
* Use 'gap' to describe a maximal range of unallocated blocks/bits.
*/
struct gap_stats {
daddr_t start; /* current gap start, or SWAPBLK_NONE */
daddr_t num; /* number of gaps observed */
daddr_t max; /* largest gap size */
daddr_t avg; /* average gap size */
daddr_t err; /* sum - num * avg */
daddr_t histo[nitems(fib)]; /* # gaps in each size range */
int max_bucket; /* last histo elt with nonzero val */
};
/*
* gap_stats_counting() - is the state 'counting 1 bits'?
* or 'skipping 0 bits'?
*/
static inline bool
gap_stats_counting(const struct gap_stats *stats)
{
return (stats->start != SWAPBLK_NONE);
}
/*
* init_gap_stats() - initialize stats on gap sizes
*/
static inline void
init_gap_stats(struct gap_stats *stats)
{
bzero(stats, sizeof(*stats));
stats->start = SWAPBLK_NONE;
}
/*
* update_gap_stats() - update stats on gap sizes
*/
static void
update_gap_stats(struct gap_stats *stats, daddr_t posn)
{
daddr_t size;
int hi, lo, mid;
if (!gap_stats_counting(stats)) {
stats->start = posn;
return;
}
size = posn - stats->start;
stats->start = SWAPBLK_NONE;
if (size > stats->max)
stats->max = size;
/*
* Find the fibonacci range that contains size,
* expecting to find it in an early range.
*/
lo = 0;
hi = 1;
while (hi < nitems(fib) && fib[hi] <= size) {
lo = hi;
hi *= 2;
}
if (hi >= nitems(fib))
hi = nitems(fib);
while (lo + 1 != hi) {
mid = (lo + hi) >> 1;
if (fib[mid] <= size)
lo = mid;
else
hi = mid;
}
stats->histo[lo]++;
if (lo > stats->max_bucket)
stats->max_bucket = lo;
stats->err += size - stats->avg;
stats->num++;
stats->avg += stats->err / stats->num;
stats->err %= stats->num;
}
/*
* dump_gap_stats() - print stats on gap sizes
*/
static inline void
dump_gap_stats(const struct gap_stats *stats, struct sbuf *s)
{
int i;
sbuf_printf(s, "number of maximal free ranges: %jd\n",
(intmax_t)stats->num);
sbuf_printf(s, "largest free range: %jd\n", (intmax_t)stats->max);
sbuf_printf(s, "average maximal free range size: %jd\n",
(intmax_t)stats->avg);
sbuf_printf(s, "number of maximal free ranges of different sizes:\n");
sbuf_printf(s, " count | size range\n");
sbuf_printf(s, " ----- | ----------\n");
for (i = 0; i < stats->max_bucket; i++) {
if (stats->histo[i] != 0) {
sbuf_printf(s, "%20jd | ",
(intmax_t)stats->histo[i]);
if (fib[i] != fib[i + 1] - 1)
sbuf_printf(s, "%jd to %jd\n", (intmax_t)fib[i],
(intmax_t)fib[i + 1] - 1);
else
sbuf_printf(s, "%jd\n", (intmax_t)fib[i]);
}
}
sbuf_printf(s, "%20jd | ", (intmax_t)stats->histo[i]);
if (stats->histo[i] > 1)
sbuf_printf(s, "%jd to %jd\n", (intmax_t)fib[i],
(intmax_t)stats->max);
else
sbuf_printf(s, "%jd\n", (intmax_t)stats->max);
}
/*
* blist_stats() - dump radix tree stats
*/
void
blist_stats(blist_t bl, struct sbuf *s)
{
struct gap_stats gstats;
struct gap_stats *stats = &gstats;
daddr_t i, nodes, radix;
u_daddr_t bit, diff, mask;
init_gap_stats(stats);
nodes = 0;
i = bl->bl_radix;
while (i < bl->bl_radix + bl->bl_blocks) {
/*
* Find max size subtree starting at i.
*/
radix = BLIST_BMAP_RADIX;
while (((i / radix) & BLIST_META_MASK) == 0)
radix *= BLIST_META_RADIX;
/*
* Check for skippable subtrees starting at i.
*/
while (radix > BLIST_BMAP_RADIX) {
if (bl->bl_root[nodes].u.bmu_avail == 0) {
if (gap_stats_counting(stats))
update_gap_stats(stats, i);
break;
}
if (bl->bl_root[nodes].u.bmu_avail == radix) {
if (!gap_stats_counting(stats))
update_gap_stats(stats, i);
break;
}
/*
* Skip subtree root.
*/
nodes++;
radix /= BLIST_META_RADIX;
}
if (radix == BLIST_BMAP_RADIX) {
/*
* Scan leaf.
*/
mask = bl->bl_root[nodes].u.bmu_bitmap;
diff = mask ^ (mask << 1);
if (gap_stats_counting(stats))
diff ^= 1;
while (diff != 0) {
bit = diff & -diff;
update_gap_stats(stats, i + bitpos(bit));
diff ^= bit;
}
}
nodes += radix_to_skip(radix);
i += radix;
}
update_gap_stats(stats, i);
dump_gap_stats(stats, s);
}
/************************************************************************
* ALLOCATION SUPPORT FUNCTIONS *
************************************************************************
*
* These support functions do all the actual work. They may seem
* rather longish, but that's because I've commented them up. The
* actual code is straight forward.
*
*/
/*
* blist_leaf_alloc() - allocate at a leaf in the radix tree (a bitmap).
*
* This is the core of the allocator and is optimized for the
* BLIST_BMAP_RADIX block allocation case. Otherwise, execution
* time is proportional to log2(count) + bitpos time.
*/
static daddr_t
blst_leaf_alloc(blmeta_t *scan, daddr_t blk, int count)
{
u_daddr_t mask;
int count1, hi, lo, num_shifts, range1, range_ext;
range1 = 0;
count1 = count - 1;
num_shifts = fls(count1);
mask = scan->u.bmu_bitmap;
while ((-mask & ~mask) != 0 && num_shifts > 0) {
/*
* If bit i is set in mask, then bits in [i, i+range1] are set
* in scan->u.bmu_bitmap. The value of range1 is equal to
* count1 >> num_shifts. Grow range and reduce num_shifts to 0,
* while preserving these invariants. The updates to mask leave
* fewer bits set, but each bit that remains set represents a
* longer string of consecutive bits set in scan->u.bmu_bitmap.
* If more updates to mask cannot clear more bits, because mask
* is partitioned with all 0 bits preceding all 1 bits, the loop
* terminates immediately.
*/
num_shifts--;
range_ext = range1 + ((count1 >> num_shifts) & 1);
/*
* mask is a signed quantity for the shift because when it is
* shifted right, the sign bit should copied; when the last
* block of the leaf is free, pretend, for a while, that all the
* blocks that follow it are also free.
*/
mask &= (daddr_t)mask >> range_ext;
range1 += range_ext;
}
if (mask == 0) {
/*
* Update bighint. There is no allocation bigger than range1
* starting in this leaf.
*/
scan->bm_bighint = range1;
return (SWAPBLK_NONE);
}
/* Discard any candidates that appear before blk. */
mask &= (u_daddr_t)-1 << (blk & BLIST_BMAP_MASK);
if (mask == 0)
return (SWAPBLK_NONE);
/*
* The least significant set bit in mask marks the start of the first
* available range of sufficient size. Clear all the bits but that one,
* and then find its position.
*/
mask &= -mask;
lo = bitpos(mask);
hi = lo + count;
if (hi > BLIST_BMAP_RADIX) {
/*
* An allocation within this leaf is impossible, so a successful
* allocation depends on the next leaf providing some of the blocks.
*/
if (((blk / BLIST_BMAP_RADIX + 1) & BLIST_META_MASK) == 0) {
/*
* The next leaf has a different meta-node parent, so it
* is not necessarily initialized. Update bighint,
* comparing the range found at the end of mask to the
* largest earlier range that could have been made to
* vanish in the initial processing of mask.
*/
scan->bm_bighint = imax(BLIST_BMAP_RADIX - lo, range1);
return (SWAPBLK_NONE);
}
hi -= BLIST_BMAP_RADIX;
if (((scan[1].u.bmu_bitmap + 1) & ~((u_daddr_t)-1 << hi)) != 0) {
/*
* The next leaf doesn't have enough free blocks at the
* beginning to complete the spanning allocation. The
* hint cannot be updated, because the same allocation
* request could be satisfied later, by this leaf, if
* the state of the next leaf changes, and without any
* changes to this leaf.
*/
return (SWAPBLK_NONE);
}
/* Clear the first 'hi' bits in the next leaf, allocating them. */
scan[1].u.bmu_bitmap &= (u_daddr_t)-1 << hi;
hi = BLIST_BMAP_RADIX;
}
/* Set the bits of mask at position 'lo' and higher. */
mask = -mask;
if (hi == BLIST_BMAP_RADIX) {
/*
* Update bighint. There is no allocation bigger than range1
* available in this leaf after this allocation completes.
*/
scan->bm_bighint = range1;
} else {
/* Clear the bits of mask at position 'hi' and higher. */
mask &= (u_daddr_t)-1 >> (BLIST_BMAP_RADIX - hi);
/* If this allocation uses all the bits, clear the hint. */
if (mask == scan->u.bmu_bitmap)
scan->bm_bighint = 0;
}
/* Clear the allocated bits from this leaf. */
scan->u.bmu_bitmap &= ~mask;
return ((blk & ~BLIST_BMAP_MASK) + lo);
}
/*
* blist_meta_alloc() - allocate at a meta in the radix tree.
*
* Attempt to allocate at a meta node. If we can't, we update
* bighint and return a failure. Updating bighint optimize future
* calls that hit this node. We have to check for our collapse cases
* and we have a few optimizations strewn in as well.
*/
static daddr_t
blst_meta_alloc(blmeta_t *scan, daddr_t cursor, daddr_t count, u_daddr_t radix)
{
daddr_t blk, i, next_skip, r, skip;
int child;
bool scan_from_start;
if (radix == BLIST_BMAP_RADIX)
return (blst_leaf_alloc(scan, cursor, count));
if (scan->u.bmu_avail < count) {
/*
* The meta node's hint must be too large if the allocation
* exceeds the number of free blocks. Reduce the hint, and
* return failure.
*/
scan->bm_bighint = scan->u.bmu_avail;
return (SWAPBLK_NONE);
}
blk = cursor & -radix;
skip = radix_to_skip(radix);
next_skip = skip / BLIST_META_RADIX;
/*
* An ALL-FREE meta node requires special handling before allocating
* any of its blocks.
*/
if (scan->u.bmu_avail == radix) {
radix /= BLIST_META_RADIX;
/*
* Reinitialize each of the meta node's children. An ALL-FREE
* meta node cannot have a terminator in any subtree.
*/
for (i = 1; i < skip; i += next_skip) {
if (next_skip == 1)
scan[i].u.bmu_bitmap = (u_daddr_t)-1;
else
scan[i].u.bmu_avail = radix;
scan[i].bm_bighint = radix;
}
} else {
radix /= BLIST_META_RADIX;
}
if (count > radix) {
/*
* The allocation exceeds the number of blocks that are
* managed by a subtree of this meta node.
*/
panic("allocation too large");
}
scan_from_start = cursor == blk;
child = (cursor - blk) / radix;
blk += child * radix;
for (i = 1 + child * next_skip; i < skip; i += next_skip) {
if (count <= scan[i].bm_bighint) {
/*
* The allocation might fit beginning in the i'th subtree.
*/
r = blst_meta_alloc(&scan[i],
cursor > blk ? cursor : blk, count, radix);
if (r != SWAPBLK_NONE) {
scan->u.bmu_avail -= count;
return (r);
}
} else if (scan[i].bm_bighint == (daddr_t)-1) {
/*
* Terminator
*/
break;
}
blk += radix;
}
/*
* We couldn't allocate count in this subtree, update bighint.
*/
if (scan_from_start && scan->bm_bighint >= count)
scan->bm_bighint = count - 1;
return (SWAPBLK_NONE);
}
/*
* BLST_LEAF_FREE() - free allocated block from leaf bitmap
*
*/
static void
blst_leaf_free(blmeta_t *scan, daddr_t blk, int count)
{
u_daddr_t mask;
int n;
/*
* free some data in this bitmap
* mask=0000111111111110000
* \_________/\__/
* count n
*/
n = blk & BLIST_BMAP_MASK;
mask = ((u_daddr_t)-1 << n) &
((u_daddr_t)-1 >> (BLIST_BMAP_RADIX - count - n));
if (scan->u.bmu_bitmap & mask)
panic("freeing free block");
scan->u.bmu_bitmap |= mask;
/*
* We could probably do a better job here. We are required to make
* bighint at least as large as the biggest contiguous block of
* data. If we just shoehorn it, a little extra overhead will
* be incured on the next allocation (but only that one typically).
*/
scan->bm_bighint = BLIST_BMAP_RADIX;
}
/*
* BLST_META_FREE() - free allocated blocks from radix tree meta info
*
* This support routine frees a range of blocks from the bitmap.
* The range must be entirely enclosed by this radix node. If a
* meta node, we break the range down recursively to free blocks
* in subnodes (which means that this code can free an arbitrary
* range whereas the allocation code cannot allocate an arbitrary
* range).
*/
static void
blst_meta_free(blmeta_t *scan, daddr_t freeBlk, daddr_t count, u_daddr_t radix)
{
daddr_t blk, i, next_skip, skip, v;
int child;
if (scan->bm_bighint == (daddr_t)-1)
panic("freeing invalid range");
if (radix == BLIST_BMAP_RADIX)
return (blst_leaf_free(scan, freeBlk, count));
skip = radix_to_skip(radix);
next_skip = skip / BLIST_META_RADIX;
if (scan->u.bmu_avail == 0) {
/*
* ALL-ALLOCATED special case, with possible
* shortcut to ALL-FREE special case.
*/
scan->u.bmu_avail = count;
scan->bm_bighint = count;
if (count != radix) {
for (i = 1; i < skip; i += next_skip) {
if (scan[i].bm_bighint == (daddr_t)-1)
break;
scan[i].bm_bighint = 0;
if (next_skip == 1) {
scan[i].u.bmu_bitmap = 0;
} else {
scan[i].u.bmu_avail = 0;
}
}
/* fall through */
}
} else {
scan->u.bmu_avail += count;
/* scan->bm_bighint = radix; */
}
/*
* ALL-FREE special case.
*/
if (scan->u.bmu_avail == radix)
return;
if (scan->u.bmu_avail > radix)
panic("blst_meta_free: freeing already free blocks (%lld) %lld/%lld",
(long long)count, (long long)scan->u.bmu_avail,
(long long)radix);
/*
* Break the free down into its components
*/
blk = freeBlk & -radix;
radix /= BLIST_META_RADIX;
child = (freeBlk - blk) / radix;
blk += child * radix;
i = 1 + child * next_skip;
while (i < skip && blk < freeBlk + count) {
v = blk + radix - freeBlk;
if (v > count)
v = count;
blst_meta_free(&scan[i], freeBlk, v, radix);
if (scan->bm_bighint < scan[i].bm_bighint)
scan->bm_bighint = scan[i].bm_bighint;
count -= v;
freeBlk += v;
blk += radix;
i += next_skip;
}
}
/*
* BLIST_RADIX_COPY() - copy one radix tree to another
*
* Locates free space in the source tree and frees it in the destination
* tree. The space may not already be free in the destination.
*/
static void
blst_copy(blmeta_t *scan, daddr_t blk, daddr_t radix, blist_t dest,
daddr_t count)
{
daddr_t i, next_skip, skip;
/*
* Leaf node
*/
if (radix == BLIST_BMAP_RADIX) {
u_daddr_t v = scan->u.bmu_bitmap;
if (v == (u_daddr_t)-1) {
blist_free(dest, blk, count);
} else if (v != 0) {
int i;
for (i = 0; i < BLIST_BMAP_RADIX && i < count; ++i) {
if (v & ((u_daddr_t)1 << i))
blist_free(dest, blk + i, 1);
}
}
return;
}
/*
* Meta node
*/
if (scan->u.bmu_avail == 0) {
/*
* Source all allocated, leave dest allocated
*/
return;
}
if (scan->u.bmu_avail == radix) {
/*
* Source all free, free entire dest
*/
if (count < radix)
blist_free(dest, blk, count);
else
blist_free(dest, blk, radix);
return;
}
skip = radix_to_skip(radix);
next_skip = skip / BLIST_META_RADIX;
radix /= BLIST_META_RADIX;
for (i = 1; count && i < skip; i += next_skip) {
if (scan[i].bm_bighint == (daddr_t)-1)
break;
if (count >= radix) {
blst_copy(&scan[i], blk, radix, dest, radix);
count -= radix;
} else {
if (count) {
blst_copy(&scan[i], blk, radix, dest, count);
}
count = 0;
}
blk += radix;
}
}
/*
* BLST_LEAF_FILL() - allocate specific blocks in leaf bitmap
*
* This routine allocates all blocks in the specified range
* regardless of any existing allocations in that range. Returns
* the number of blocks allocated by the call.
*/
static daddr_t
blst_leaf_fill(blmeta_t *scan, daddr_t blk, int count)
{
daddr_t nblks;
u_daddr_t mask;
int n;
n = blk & BLIST_BMAP_MASK;
mask = ((u_daddr_t)-1 << n) &
((u_daddr_t)-1 >> (BLIST_BMAP_RADIX - count - n));
/* Count the number of blocks that we are allocating. */
nblks = bitcount64(scan->u.bmu_bitmap & mask);
scan->u.bmu_bitmap &= ~mask;
return (nblks);
}
/*
* BLIST_META_FILL() - allocate specific blocks at a meta node
*
* This routine allocates the specified range of blocks,
* regardless of any existing allocations in the range. The
* range must be within the extent of this node. Returns the
* number of blocks allocated by the call.
*/
static daddr_t
blst_meta_fill(blmeta_t *scan, daddr_t allocBlk, daddr_t count, u_daddr_t radix)
{
daddr_t blk, i, nblks, next_skip, skip, v;
int child;
if (scan->bm_bighint == (daddr_t)-1)
panic("filling invalid range");
if (count > radix) {
/*
* The allocation exceeds the number of blocks that are
* managed by this node.
*/
panic("fill too large");
}
if (radix == BLIST_BMAP_RADIX)
return (blst_leaf_fill(scan, allocBlk, count));
if (count == radix || scan->u.bmu_avail == 0) {
/*
* ALL-ALLOCATED special case
*/
nblks = scan->u.bmu_avail;
scan->u.bmu_avail = 0;
scan->bm_bighint = 0;
return (nblks);
}
skip = radix_to_skip(radix);
next_skip = skip / BLIST_META_RADIX;
blk = allocBlk & -radix;
/*
* An ALL-FREE meta node requires special handling before allocating
* any of its blocks.
*/
if (scan->u.bmu_avail == radix) {
radix /= BLIST_META_RADIX;
/*
* Reinitialize each of the meta node's children. An ALL-FREE
* meta node cannot have a terminator in any subtree.
*/
for (i = 1; i < skip; i += next_skip) {
if (next_skip == 1)
scan[i].u.bmu_bitmap = (u_daddr_t)-1;
else
scan[i].u.bmu_avail = radix;
scan[i].bm_bighint = radix;
}
} else {
radix /= BLIST_META_RADIX;
}
nblks = 0;
child = (allocBlk - blk) / radix;
blk += child * radix;
i = 1 + child * next_skip;
while (i < skip && blk < allocBlk + count) {
v = blk + radix - allocBlk;
if (v > count)
v = count;
nblks += blst_meta_fill(&scan[i], allocBlk, v, radix);
count -= v;
allocBlk += v;
blk += radix;
i += next_skip;
}
scan->u.bmu_avail -= nblks;
return (nblks);
}
/*
* BLST_RADIX_INIT() - initialize radix tree
*
* Initialize our meta structures and bitmaps and calculate the exact
* amount of space required to manage 'count' blocks - this space may
* be considerably less than the calculated radix due to the large
* RADIX values we use.
*/
static daddr_t
blst_radix_init(blmeta_t *scan, daddr_t radix, daddr_t count)
{
daddr_t i, memindex, next_skip, skip;
memindex = 0;
/*
* Leaf node
*/
if (radix == BLIST_BMAP_RADIX) {
if (scan) {
scan->bm_bighint = 0;
scan->u.bmu_bitmap = 0;
}
return (memindex);
}
/*
* Meta node. If allocating the entire object we can special
* case it. However, we need to figure out how much memory
* is required to manage 'count' blocks, so we continue on anyway.
*/
if (scan) {
scan->bm_bighint = 0;
scan->u.bmu_avail = 0;
}
skip = radix_to_skip(radix);
next_skip = skip / BLIST_META_RADIX;
radix /= BLIST_META_RADIX;
for (i = 1; i < skip; i += next_skip) {
if (count >= radix) {
/*
* Allocate the entire object
*/
memindex = i +
blst_radix_init(((scan) ? &scan[i] : NULL), radix,
radix);
count -= radix;
} else if (count > 0) {
/*
* Allocate a partial object
*/
memindex = i +
blst_radix_init(((scan) ? &scan[i] : NULL), radix,
count);
count = 0;
} else {
/*
* Add terminator and break out. Make terminator bitmap
* zero to avoid a spanning leaf allocation that
* includes the terminator.
*/
if (scan) {
scan[i].bm_bighint = (daddr_t)-1;
scan[i].u.bmu_bitmap = 0;
}
break;
}
}
if (memindex < i)
memindex = i;
return (memindex);
}
#ifdef BLIST_DEBUG
static void
blst_radix_print(blmeta_t *scan, daddr_t blk, daddr_t radix, int tab)
{
daddr_t i, next_skip, skip;
if (radix == BLIST_BMAP_RADIX) {
printf(
"%*.*s(%08llx,%lld): bitmap %016llx big=%lld\n",
tab, tab, "",
(long long)blk, (long long)radix,
(long long)scan->u.bmu_bitmap,
(long long)scan->bm_bighint
);
return;
}
if (scan->u.bmu_avail == 0) {
printf(
"%*.*s(%08llx,%lld) ALL ALLOCATED\n",
tab, tab, "",
(long long)blk,
(long long)radix
);
return;
}
if (scan->u.bmu_avail == radix) {
printf(
"%*.*s(%08llx,%lld) ALL FREE\n",
tab, tab, "",
(long long)blk,
(long long)radix
);
return;
}
printf(
"%*.*s(%08llx,%lld): subtree (%lld/%lld) big=%lld {\n",
tab, tab, "",
(long long)blk, (long long)radix,
(long long)scan->u.bmu_avail,
(long long)radix,
(long long)scan->bm_bighint
);
skip = radix_to_skip(radix);
next_skip = skip / BLIST_META_RADIX;
radix /= BLIST_META_RADIX;
tab += 4;
for (i = 1; i < skip; i += next_skip) {
if (scan[i].bm_bighint == (daddr_t)-1) {
printf(
"%*.*s(%08llx,%lld): Terminator\n",
tab, tab, "",
(long long)blk, (long long)radix
);
break;
}
blst_radix_print(&scan[i], blk, radix, tab);
blk += radix;
}
tab -= 4;
printf(
"%*.*s}\n",
tab, tab, ""
);
}
#endif
#ifdef BLIST_DEBUG
int
main(int ac, char **av)
{
int size = 1024;
int i;
blist_t bl;
struct sbuf *s;
for (i = 1; i < ac; ++i) {
const char *ptr = av[i];
if (*ptr != '-') {
size = strtol(ptr, NULL, 0);
continue;
}
ptr += 2;
fprintf(stderr, "Bad option: %s\n", ptr - 2);
exit(1);
}
bl = blist_create(size, M_WAITOK);
blist_free(bl, 0, size);
for (;;) {
char buf[1024];
long long da = 0;
long long count = 0;
printf("%lld/%lld/%lld> ", (long long)blist_avail(bl),
(long long)size, (long long)bl->bl_radix);
fflush(stdout);
if (fgets(buf, sizeof(buf), stdin) == NULL)
break;
switch(buf[0]) {
case 'r':
if (sscanf(buf + 1, "%lld", &count) == 1) {
blist_resize(&bl, count, 1, M_WAITOK);
} else {
printf("?\n");
}
case 'p':
blist_print(bl);
break;
case 's':
s = sbuf_new_auto();
blist_stats(bl, s);
sbuf_finish(s);
printf("%s", sbuf_data(s));
sbuf_delete(s);
break;
case 'a':
if (sscanf(buf + 1, "%lld", &count) == 1) {
daddr_t blk = blist_alloc(bl, count);
printf(" R=%08llx\n", (long long)blk);
} else {
printf("?\n");
}
break;
case 'f':
if (sscanf(buf + 1, "%llx %lld", &da, &count) == 2) {
blist_free(bl, da, count);
} else {
printf("?\n");
}
break;
case 'l':
if (sscanf(buf + 1, "%llx %lld", &da, &count) == 2) {
printf(" n=%jd\n",
(intmax_t)blist_fill(bl, da, count));
} else {
printf("?\n");
}
break;
case '?':
case 'h':
puts(
"p -print\n"
"s -stats\n"
"a %d -allocate\n"
"f %x %d -free\n"
"l %x %d -fill\n"
"r %d -resize\n"
"h/? -help"
);
break;
default:
printf("?\n");
break;
}
}
return(0);
}
void
panic(const char *ctl, ...)
{
va_list va;
va_start(va, ctl);
vfprintf(stderr, ctl, va);
fprintf(stderr, "\n");
va_end(va);
exit(1);
}
#endif
Reference in New Issue View Git Blame Copy Permalink