18817ccf44
background fsck. The delay defaults to sixty seconds to allow large applications such as the X server to start before disk I/O bandwidth is monopolized by fsck. Submitted by: Brooks Davis <brooks@one-eyed-alien.net> Sponsored by: DARPA & NAI Labs.
452 lines
23 KiB
Bash
452 lines
23 KiB
Bash
#!/bin/sh
|
|
#
|
|
|
|
# This is rc.conf - a file full of useful variables that you can set
|
|
# to change the default startup behavior of your system. You should
|
|
# not edit this file! Put any overrides into one of the ${rc_conf_files}
|
|
# instead and you will be able to update these defaults later without
|
|
# spamming your local configuration information.
|
|
#
|
|
# The ${rc_conf_files} files should only contain values which override
|
|
# values set in this file. This eases the upgrade path when defaults
|
|
# are changed and new features are added.
|
|
#
|
|
# All arguments must be in double or single quotes.
|
|
#
|
|
# $FreeBSD$
|
|
|
|
##############################################################
|
|
### Important initial Boot-time options ####################
|
|
##############################################################
|
|
|
|
rc_ng="YES" # Set to NO to disable new-style rc scripts.
|
|
rc_info="YES" # Enables display of informational messages at boot.
|
|
rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
|
|
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
|
|
apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
|
|
apmd_enable="NO" # Run apmd to handle APM event from userland.
|
|
apmd_flags="" # Flags to apmd (if enabled).
|
|
devd_enable="NO" # Run devd, to trigger programs on device tree changes.
|
|
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
|
|
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
|
|
pccard_beep="2" # pccard beep type.
|
|
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
|
|
pccardd_flags="-z" # Additional flags for pccardd.
|
|
pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
|
|
pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
|
|
removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
|
|
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
|
|
script_name_sep=" " # Change if your startup scripts' names contain spaces
|
|
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
|
|
fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
|
|
background_fsck="YES" # Attempt to run fsck in the background where possible.
|
|
background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
|
|
extra_netfs_types="NO" # List of network extra filesystem types for delayed
|
|
# mount at startup (or NO).
|
|
|
|
##############################################################
|
|
### Network configuration sub-section ######################
|
|
##############################################################
|
|
|
|
### Basic network and firewall/security options: ###
|
|
hostname="" # Set this!
|
|
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
|
|
dhcp_program="/sbin/dhclient" # Path to dhcp client program.
|
|
dhcp_flags="" # Additional flags to pass to dhcp client.
|
|
firewall_enable="NO" # Set to YES to enable firewall functionality
|
|
firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
|
|
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
|
|
firewall_quiet="NO" # Set to YES to suppress rule display
|
|
firewall_logging="NO" # Set to YES to enable events logging
|
|
firewall_flags="" # Flags passed to ipfw when type is a file
|
|
ip_portrange_first="NO" # Set first dynamically allocated port
|
|
ip_portrange_last="NO" # Set last dynamically allocated port
|
|
ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
|
|
ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
|
|
natd_program="/sbin/natd" # path to natd, if you want a different one.
|
|
natd_enable="NO" # Enable natd (if firewall_enable == YES).
|
|
natd_interface="" # Public interface or IPaddress to use.
|
|
natd_flags="" # Additional flags for natd.
|
|
ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
|
|
ipfilter_program="/sbin/ipf" # where the ipfilter program lives
|
|
ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
|
|
# /usr/src/contrib/ipfilter/rules for examples
|
|
ipfilter_flags="" # additional flags for ipfilter
|
|
ipnat_enable="NO" # Set to YES to enable ipnat functionality
|
|
ipnat_program="/sbin/ipnat" # where the ipnat program lives
|
|
ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
|
|
ipnat_flags="" # additional flags for ipnat
|
|
ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
|
|
ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
|
|
ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
|
|
ipfs_enable="NO" # Set to YES to enable saving and restoring
|
|
# of state tables at shutdown and boot
|
|
ipfs_program="/sbin/ipfs" # where the ipfs program lives
|
|
ipfs_flags="" # additional flags for ipfs
|
|
tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
|
|
log_in_vain="0" # >=1 to log connects to ports w/o listeners.
|
|
tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
|
|
# For the following option you need to have TCP_DROP_SYNFIN set in your
|
|
# kernel. Please refer to LINT and NOTES for details.
|
|
tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
|
|
# NOTE: this violates the TCP specification
|
|
icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
|
|
icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
|
|
network_interfaces="auto" # List of network interfaces (or "auto").
|
|
cloned_interfaces="" # List of cloned network interfaces to create.
|
|
#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
|
|
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
|
|
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
|
|
#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
|
|
#
|
|
# If you have any sppp(4) interfaces above, you might also want to set
|
|
# the following parameters. Refer to spppcontrol(8) for their meaning.
|
|
sppp_interfaces="" # List of sppp interfaces.
|
|
#sppp_interfaces="isp0" # example: sppp over ISDN
|
|
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
|
|
gif_interfaces="NO" # List of GIF tunnels (or "NO").
|
|
#gif_interfaces="gif0 gif1" # Examples typically for a router.
|
|
# Choose correct tunnel addrs.
|
|
#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
|
|
#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
|
|
|
|
# User ppp configuration.
|
|
ppp_enable="NO" # Start user-ppp (or NO).
|
|
ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
|
|
# For details see man page for ppp(8). Default is auto.
|
|
ppp_nat="YES" # Use PPP's internal network address translation or NO.
|
|
ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
|
|
ppp_user="root" # Which user to run ppp as
|
|
|
|
### Network daemon (miscellaneous) ###
|
|
syslogd_enable="YES" # Run syslog daemon (or NO).
|
|
syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
|
|
syslogd_flags="-s" # Flags to syslogd (if enabled).
|
|
#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
|
|
inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
|
|
inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
|
|
inetd_flags="-wW" # Optional flags to inetd
|
|
#
|
|
# named. It may be possible to run named in a sandbox, man security for
|
|
# details.
|
|
#
|
|
named_rcng="NO" # XXX Temporary. Enable to use new rc
|
|
# functionality in support of named. See
|
|
# variables below.
|
|
named_enable="NO" # Run named, the DNS server (or NO).
|
|
named_program="/usr/sbin/named" # path to named, if you want a different one.
|
|
named_flags="-u bind -g bind" # Flags for named
|
|
named_chrootdir="" # Chroot directory (or "" not to auto-chroot it)
|
|
named_chroot_autoupdate="YES" # Automatically install/update chrooted
|
|
# components of named. See /etc/rc.d/named.
|
|
named_symlink_enable="YES" # Symlink /var/run/named.pid and /var/run/ndc
|
|
# to their chrooted counterparts.
|
|
|
|
#
|
|
# kerberos. Do not run the admin daemons on slave servers
|
|
#
|
|
kerberos4_server_enable="NO" # Run a kerberos IV master server (or NO).
|
|
kerberos4_server="/usr/sbin/kerberos" # path to kerberos IV KDC
|
|
kadmind4_server_enable="NO" # Run kadmind (or NO)
|
|
kadmind4_server="/usr/sbin/kadmind" # path to kerberos IV admin daemon
|
|
kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
|
|
kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
|
|
kadmind5_server_enable="NO" # Run kadmind (or NO)
|
|
kadmind5_server="/usr/libexec/k5admind" # path to kerberos 5 admin daemon
|
|
kerberos_stash="NO" # Is the kerberos master key stashed?
|
|
|
|
rwhod_enable="NO" # Run the rwho daemon (or NO).
|
|
rwhod_flags="" # Flags for rwhod
|
|
rarpd_enable="NO" # Run rarpd (or NO).
|
|
rarpd_flags="" # Flags to rarpd.
|
|
bootparamd_enable="NO" # Run bootparamd (or NO).
|
|
bootparamd_flags="" # Flags to bootparamd
|
|
xtend_enable="NO" # Run the X-10 power controller daemon.
|
|
xtend_flags="" # Flags to xtend (if enabled).
|
|
pppoed_enable="NO" # Run the PPP over Ethernet daemon.
|
|
pppoed_provider="*" # Provider and ppp(8) config file entry.
|
|
pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
|
|
pppoed_interface="fxp0" # The interface that pppoed runs on.
|
|
sshd_enable="NO" # Enable sshd
|
|
sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
|
|
sshd_flags="" # Additional flags for sshd.
|
|
|
|
### Network daemon (NFS): All need rpcbind_enable="YES" ###
|
|
amd_enable="NO" # Run amd service with $amd_flags (or NO).
|
|
amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
|
|
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
|
|
nfs_client_enable="NO" # This host is an NFS client (or NO).
|
|
nfs_access_cache="2" # Client cache timeout in seconds
|
|
nfs_server_enable="NO" # This host is an NFS server (or NO).
|
|
nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
|
|
mountd_enable="NO" # Run mountd (or NO).
|
|
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
|
|
weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
|
|
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
|
|
nfs_bufpackets="DEFAULT" # bufspace (in packets) for client (or DEFAULT)
|
|
rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
|
|
rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
|
|
rpcbind_enable="NO" # Run the portmapper service (YES/NO).
|
|
rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
|
|
rpcbind_flags="" # Flags to rpcbind (if enabled).
|
|
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
|
|
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
|
|
keyserv_flags="" # Flags to keyserv (if enabled).
|
|
|
|
### Network Time Services options: ###
|
|
timed_enable="NO" # Run the time daemon (or NO).
|
|
timed_flags="" # Flags to timed (if enabled).
|
|
ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
|
|
ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
|
|
ntpdate_flags="-b" # Flags to ntpdate (if enabled).
|
|
ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
|
|
ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
|
|
ntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
|
|
|
|
# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
|
|
nis_client_enable="NO" # We're an NIS client (or NO).
|
|
nis_client_flags="" # Flags to ypbind (if enabled).
|
|
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
|
|
nis_ypset_flags="" # Flags to ypset (if enabled).
|
|
nis_server_enable="NO" # We're an NIS server (or NO).
|
|
nis_server_flags="" # Flags to ypserv (if enabled).
|
|
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
|
|
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
|
|
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
|
|
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
|
|
|
|
### Network routing options: ###
|
|
defaultrouter="NO" # Set to default gateway (or NO).
|
|
static_routes="" # Set to static route list (or leave empty).
|
|
gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
router_enable="NO" # Set to YES to enable a routing daemon.
|
|
router="/sbin/routed" # Name of routing daemon to use if enabled.
|
|
router_flags="-q" # Flags for routing daemon.
|
|
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
|
|
mrouted_flags="" # Flags for multicast routing daemon.
|
|
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
|
|
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
|
|
ipxrouted_flags="" # Flags for IPX routing daemon.
|
|
arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
|
|
forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
|
|
accept_sourceroute="NO" # accept source routed packets to us
|
|
|
|
### ATM interface options: ###
|
|
atm_enable="NO" # Configure ATM interfaces (or NO).
|
|
#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
|
|
#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
|
|
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
|
|
#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
|
|
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
|
|
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
|
|
atm_pvcs="" # Set to PVC list (or leave empty).
|
|
atm_arps="" # Set to permanent ARP list (or leave empty).
|
|
|
|
### ISDN interface options: (see also: /usr/share/examples/isdn) ###
|
|
isdn_enable="NO" # Enable the ISDN subsystem (or NO).
|
|
isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
|
|
isdn_flags="-dn -d0x1f9" # Flags for isdnd
|
|
isdn_ttype="cons25" # terminal type for fullscreen mode
|
|
isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
|
|
isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
|
|
isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
|
|
|
|
### Miscellaneous network options: ###
|
|
icmp_bmcastecho="NO" # respond to broadcast ping packets
|
|
|
|
### IPv6 options: ###
|
|
ipv6_enable="NO" # Set to YES to set up for IPv6.
|
|
ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
|
|
ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
|
|
#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
|
|
ipv6_static_routes="" # Set to static route list (or leave empty).
|
|
#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
|
|
# route toward loopback interface.
|
|
#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
|
|
ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
|
|
ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
|
|
ipv6_router_flags="" # Flags to IPv6 routing daemon.
|
|
#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
|
|
# addrs.
|
|
#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
|
|
# node, you should stop advertisement.
|
|
#ipv6_network_interfaces="ed0 ep0" # Examples for router
|
|
# or static configuration for end node.
|
|
# Choose correct prefix value.
|
|
#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
|
|
#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
|
|
#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
|
|
#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
|
|
ipv6_default_interface="NO" # Default output interface for scoped addrs.
|
|
# Now this works only for IPv6 link local
|
|
# multicast addrs.
|
|
rtadvd_enable="NO" # Set to YES to enable an IPv6 router
|
|
# advertisement daemon. If set to YES,
|
|
# this router becomes a possible candidate
|
|
# IPv6 default router for local subnets.
|
|
rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
|
|
mroute6d_enable="NO" # Do IPv6 multicast routing.
|
|
mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
|
|
# routing daemon. You need to
|
|
# install it from package or
|
|
# port.
|
|
mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
|
|
stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
|
|
# tunneling interface. Specify this entry
|
|
# to enable 6to4 interface.
|
|
stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
|
|
# to limit peer addr range. Effective value
|
|
# is 0-31.
|
|
stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
|
|
# If you like, you can set "AUTO" for this.
|
|
stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
|
|
ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
|
|
# IPv6-to-IPv4 TCP translator. You also need
|
|
# faithd(8) setup.
|
|
ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
|
|
# communication. (like ::ffff:a.b.c.d)
|
|
ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
|
|
# functionality
|
|
ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
|
|
ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
|
|
ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
|
|
ipv6_firewall_logging="NO" # Set to YES to enable events logging
|
|
ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
|
|
ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
|
|
# see /usr/src/contrib/ipfilter/rules
|
|
# for examples
|
|
|
|
##############################################################
|
|
### System console options #################################
|
|
##############################################################
|
|
|
|
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
|
|
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
|
|
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
|
|
keychange="NO" # function keys default values (or NO).
|
|
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
|
|
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
|
|
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
|
|
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
|
|
saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
|
|
moused_enable="NO" # Run the mouse daemon.
|
|
moused_type="auto" # See man page for rc.conf(5) for available settings.
|
|
moused_port="/dev/psm0" # Set to your mouse port.
|
|
moused_flags="" # Any additional flags to moused.
|
|
mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
|
|
# language code table, specify alternative range
|
|
# start like mousechar_start=3, see vidcontrol(1)
|
|
allscreens_flags="" # Set this vidcontrol mode for all virtual screens
|
|
allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
|
|
|
|
|
|
##############################################################
|
|
### pcvt console driver options ############################
|
|
##############################################################
|
|
|
|
pcvt_verbose="NO" # set to YES to enable verbose configuration messages
|
|
pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO).
|
|
pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO).
|
|
pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO).
|
|
pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO).
|
|
pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO).
|
|
pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO).
|
|
pcvt_lines="NO" # lines (25, 28, 40, 50 or NO).
|
|
pcvt_blanktime="NO" # blank time (in seconds) (or NO).
|
|
pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO).
|
|
pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO).
|
|
pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO).
|
|
|
|
|
|
##############################################################
|
|
### Mail Transfer Agent (MTA) options ######################
|
|
##############################################################
|
|
|
|
mta_start_script="/etc/rc.sendmail"
|
|
# Script to start your chosen MTA, called by /etc/rc.
|
|
# Settings for /etc/rc.sendmail:
|
|
sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
|
|
sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
|
|
sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
|
|
sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
|
|
# Flags for localhost-only MTA
|
|
sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
|
|
sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
|
|
sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
|
|
sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
|
|
# Flags for sendmail_msp_queue daemon.
|
|
|
|
|
|
##############################################################
|
|
### Miscellaneous administrative options ###################
|
|
##############################################################
|
|
|
|
cron_enable="YES" # Run the periodic job daemon.
|
|
cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
|
|
cron_flags="" # Which options to pass to the cron daemon.
|
|
lpd_enable="NO" # Run the line printer daemon.
|
|
lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
|
|
lpd_flags="" # Flags to lpd (if enabled).
|
|
usbd_enable="NO" # Run the usbd daemon.
|
|
usbd_flags="" # Flags to usbd (if enabled).
|
|
dumpdev="NO" # Device name to crashdump to (or NO).
|
|
dumpdir="/var/crash" # Directory where crash dumps are to be stored
|
|
savecore_flags="" # Used if dumpdev is enabled above, and present.
|
|
enable_quotas="NO" # turn on quotas on startup (or NO).
|
|
check_quotas="YES" # Check quotas on startup (or NO).
|
|
accounting_enable="NO" # Turn on process accounting (or NO).
|
|
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
|
|
ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
|
|
sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
|
|
linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
|
|
svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
|
|
osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
|
|
clear_tmp_enable="NO" # Clear /tmp at startup.
|
|
ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
|
|
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
|
|
# shared library search paths
|
|
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
|
|
# a.out shared library search paths
|
|
kern_securelevel_enable="NO" # kernel security level (see init(8)),
|
|
kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
|
|
lomac_enable="NO" # start lomac(4) security module at boot
|
|
update_motd="YES" # update version info in /etc/motd (or NO)
|
|
start_vinum="NO" # set to YES to start vinum
|
|
unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
|
|
entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
|
|
# /var/db/entropy is preferred if / is not available.
|
|
entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
|
|
entropy_save_sz="2048" # Size of the entropy cache files.
|
|
entropy_save_num="8" # Number of entropy cache files to save.
|
|
harvest_interrupt="YES" # Entropy device harvests interrupt randomness
|
|
harvest_ethernet="YES" # Entropy device harvests ethernet randomness
|
|
harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
|
|
dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
|
|
|
|
##############################################################
|
|
### Define source_rc_confs, the mechanism used by /etc/rc.* ##
|
|
### scripts to source rc_conf_files overrides safely. ##
|
|
##############################################################
|
|
|
|
if [ -z "${source_rc_confs_defined}" ]; then
|
|
source_rc_confs_defined=yes
|
|
source_rc_confs () {
|
|
local i sourced_files
|
|
for i in ${rc_conf_files}; do
|
|
case ${sourced_files} in
|
|
*:$i:*)
|
|
;;
|
|
*)
|
|
sourced_files="${sourced_files}:$i:"
|
|
if [ -r $i ]; then
|
|
. $i
|
|
fi
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
fi
|