67 lines
1.8 KiB
Plaintext
67 lines
1.8 KiB
Plaintext
# $FreeBSD$
|
|
#
|
|
# Specific board setup for the D-Link DIR-825C1 router.
|
|
#
|
|
# The DIR-825C1 has the following hardware:
|
|
#
|
|
# + AR9344 CPU SoC 74k MIPS
|
|
# + ARxxx 2.4GHz 11n
|
|
# + ARXXX 5GHz 11n
|
|
# + AR8327 Gigabit switch
|
|
# + m25p80 based 16MB flash
|
|
# + 128MB RAM
|
|
# + uboot environment
|
|
|
|
# Include the default AR934x parameters
|
|
include "AR934X_BASE"
|
|
ident DIR825C1
|
|
|
|
# Override hints with board values
|
|
hints "DIR-825C1.hints"
|
|
|
|
# Force the board memory - the base DB120 has 128MB RAM
|
|
options AR71XX_REALMEM=(128*1024*1024)
|
|
|
|
# i2c GPIO bus
|
|
device gpioiic
|
|
device iicbb
|
|
device iicbus
|
|
device iic
|
|
|
|
# Options required for miiproxy and mdiobus
|
|
options ARGE_MDIO # Export an MDIO bus separate from arge
|
|
device miiproxy # MDIO bus <-> MII PHY rendezvous
|
|
|
|
device etherswitch
|
|
device arswitch
|
|
|
|
# read MSDOS formatted disks - USB
|
|
options MSDOSFS
|
|
|
|
# Enable the uboot environment stuff rather then the
|
|
# redboot stuff.
|
|
options AR71XX_ENV_UBOOT
|
|
|
|
# Used for the static uboot partition map
|
|
device geom_map
|
|
|
|
# uzip - to boot natively from flash
|
|
options GEOM_UNCOMPRESS
|
|
options GEOM_PART_GPT
|
|
|
|
# yes, this board has a PCI connected atheros device
|
|
device ath_pci
|
|
options AR71XX_ATH_EEPROM
|
|
device firmware # Used by the above
|
|
options ATH_EEPROM_FIRMWARE
|
|
|
|
# Boot off of the rootfs, as defined in the geom_map setup.
|
|
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
|
|
|
|
# In order to netboot, you have to build the mfsroot into the kernel
|
|
# 19443712 or 19M is the biggest rootfs via netboot this thing supports
|
|
#options MD_ROOT # md device usable as a potential root device
|
|
#options MD_ROOT_SIZE=19444
|
|
#makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
|
|
#options ROOTDEVNAME=\"ufs:md0.uncompress\"
|