freebsd-skq/sys/conf/options
Robert Watson 6356dba0b4 Introduce two related changes to the TrustedBSD MAC Framework:
(1) Abstract interpreter vnode labeling in execve(2) and mac_execve(2)
    so that the general exec code isn't aware of the details of
    allocating, copying, and freeing labels, rather, simply passes in
    a void pointer to start and stop functions that will be used by
    the framework.  This change will be MFC'd.

(2) Introduce a new flags field to the MAC_POLICY_SET(9) interface
    allowing policies to declare which types of objects require label
    allocation, initialization, and destruction, and define a set of
    flags covering various supported object types (MPC_OBJECT_PROC,
    MPC_OBJECT_VNODE, MPC_OBJECT_INPCB, ...).  This change reduces the
    overhead of compiling the MAC Framework into the kernel if policies
    aren't loaded, or if policies require labels on only a small number
    or even no object types.  Each time a policy is loaded or unloaded,
    we recalculate a mask of labeled object types across all policies
    present in the system.  Eliminate MAC_ALWAYS_LABEL_MBUF option as it
    is no longer required.

MFC after:	1 week ((1) only)
Reviewed by:	csjp
Obtained from:	TrustedBSD Project
Sponsored by:	Apple, Inc.
2008-08-23 15:26:36 +00:00

772 lines
19 KiB
Plaintext

# $FreeBSD$
#
# On the handling of kernel options
#
# All kernel options should be listed in NOTES, with suitable
# descriptions. Negative options (options that make some code not
# compile) should be commented out; LINT (generated from NOTES) should
# compile as much code as possible. Try to structure option-using
# code so that a single option only switch code on, or only switch
# code off, to make it possible to have a full compile-test. If
# necessary, you can check for COMPILING_LINT to get maximum code
# coverage.
#
# All new options shall also be listed in either "conf/options" or
# "conf/options.<machine>". Options that affect a single source-file
# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
# that affect multiple files should either go in "opt_global.h" if
# this is a kernel-wide option (used just about everywhere), or in
# "opt_<option-name-in-lower-case>.h" if it affects only some files.
# Note that the effect of listing only an option without a
# header-file-name in conf/options (and cousins) is that the last
# convention is followed.
#
# This handling scheme is not yet fully implemented.
#
#
# Format of this file:
# Option name filename
#
# If filename is missing, the default is
# opt_<name-of-option-in-lower-case>.h
AAC_DEBUG opt_aac.h
AHC_ALLOW_MEMIO opt_aic7xxx.h
AHC_TMODE_ENABLE opt_aic7xxx.h
AHC_DUMP_EEPROM opt_aic7xxx.h
AHC_DEBUG opt_aic7xxx.h
AHC_DEBUG_OPTS opt_aic7xxx.h
AHC_REG_PRETTY_PRINT opt_aic7xxx.h
AHD_DEBUG opt_aic79xx.h
AHD_DEBUG_OPTS opt_aic79xx.h
AHD_TMODE_ENABLE opt_aic79xx.h
AHD_REG_PRETTY_PRINT opt_aic79xx.h
ADW_ALLOW_MEMIO opt_adw.h
TWA_DEBUG opt_twa.h
TWA_FLASH_FIRMWARE opt_twa.h
# Debugging options.
DDB
DDB_BUFR_SIZE opt_ddb.h
DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
DDB_CTF opt_ddb.h
DDB_NUMSYM opt_ddb.h
GDB
KDB opt_global.h
KDB_TRACE opt_kdb.h
KDB_UNATTENDED opt_kdb.h
SYSCTL_DEBUG opt_sysctl.h
NO_SYSCTL_DESCR opt_global.h
# Miscellaneous options.
ADAPTIVE_SX
ALQ
AUDIT opt_global.h
CODA_COMPAT_5 opt_coda.h
COMPAT_43 opt_compat.h
COMPAT_43TTY opt_compat.h
COMPAT_FREEBSD4 opt_compat.h
COMPAT_FREEBSD5 opt_compat.h
COMPAT_FREEBSD6 opt_compat.h
COMPAT_FREEBSD7 opt_compat.h
COMPILING_LINT opt_global.h
CY_PCI_FASTINTR
DIRECTIO
FULL_PREEMPTION opt_sched.h
IPI_PREEMPTION opt_sched.h
GEOM_AES opt_geom.h
GEOM_BDE opt_geom.h
GEOM_BSD opt_geom.h
GEOM_CACHE opt_geom.h
GEOM_CONCAT opt_geom.h
GEOM_ELI opt_geom.h
GEOM_FOX opt_geom.h
GEOM_GATE opt_geom.h
GEOM_JOURNAL opt_geom.h
GEOM_LABEL opt_geom.h
GEOM_LINUX_LVM opt_geom.h
GEOM_MBR opt_geom.h
GEOM_MIRROR opt_geom.h
GEOM_MULTIPATH opt_geom.h
GEOM_NOP opt_geom.h
GEOM_PART_APM opt_geom.h
GEOM_PART_BSD opt_geom.h
GEOM_PART_GPT opt_geom.h
GEOM_PART_MBR opt_geom.h
GEOM_PART_PC98 opt_geom.h
GEOM_PART_VTOC8 opt_geom.h
GEOM_PC98 opt_geom.h
GEOM_RAID3 opt_geom.h
GEOM_SHSEC opt_geom.h
GEOM_STRIPE opt_geom.h
GEOM_SUNLABEL opt_geom.h
GEOM_UZIP opt_geom.h
GEOM_VIRSTOR opt_geom.h
GEOM_VOL opt_geom.h
GEOM_ZERO opt_geom.h
KDTRACE_HOOKS opt_kdtrace.h
KSTACK_MAX_PAGES
KSTACK_PAGES
KTRACE
KTRACE_REQUEST_POOL opt_ktrace.h
LIBICONV
MAC
MAC_BIBA opt_dontuse.h
MAC_BSDEXTENDED opt_dontuse.h
MAC_IFOFF opt_dontuse.h
MAC_LOMAC opt_dontuse.h
MAC_MLS opt_dontuse.h
MAC_NONE opt_dontuse.h
MAC_PARTITION opt_dontuse.h
MAC_PORTACL opt_dontuse.h
MAC_SEEOTHERUIDS opt_dontuse.h
MAC_STATIC opt_mac.h
MAC_STUB opt_dontuse.h
MAC_TEST opt_dontuse.h
MD_ROOT opt_md.h
MD_ROOT_SIZE opt_md.h
MFI_DEBUG opt_mfi.h
MFI_DECODE_LOG opt_mfi.h
MPROF_BUFFERS opt_mprof.h
MPROF_HASH_SIZE opt_mprof.h
NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
NO_ADAPTIVE_RWLOCKS
NSWBUF_MIN opt_swap.h
MBUF_PACKET_ZONE_DISABLE opt_global.h
PANIC_REBOOT_WAIT_TIME opt_panic.h
PPC_DEBUG opt_ppc.h
PPC_PROBE_CHIPSET opt_ppc.h
PPS_SYNC opt_ntp.h
PREEMPTION opt_sched.h
QUOTA
SCHED_4BSD opt_sched.h
SCHED_STATS opt_sched.h
SCHED_ULE opt_sched.h
SHOW_BUSYBUFS
SLEEPQUEUE_PROFILING
SLHCI_DEBUG opt_slhci.h
SPX_HACK
STACK opt_stack.h
SUIDDIR
MSGMNB opt_sysvipc.h
MSGMNI opt_sysvipc.h
MSGSEG opt_sysvipc.h
MSGSSZ opt_sysvipc.h
MSGTQL opt_sysvipc.h
SEMMAP opt_sysvipc.h
SEMMNI opt_sysvipc.h
SEMMNS opt_sysvipc.h
SEMMNU opt_sysvipc.h
SEMMSL opt_sysvipc.h
SEMOPM opt_sysvipc.h
SEMUME opt_sysvipc.h
SHMALL opt_sysvipc.h
SHMMAX opt_sysvipc.h
SHMMAXPGS opt_sysvipc.h
SHMMIN opt_sysvipc.h
SHMMNI opt_sysvipc.h
SHMSEG opt_sysvipc.h
SYSVMSG opt_sysvipc.h
SYSVSEM opt_sysvipc.h
SYSVSHM opt_sysvipc.h
SW_WATCHDOG opt_watchdog.h
TURNSTILE_PROFILING
VFS_AIO
VERBOSE_SYSINIT opt_global.h
WLCACHE opt_wavelan.h
WLDEBUG opt_wavelan.h
# POSIX kernel options
P1003_1B_MQUEUE opt_posix.h
P1003_1B_SEMAPHORES opt_posix.h
_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
# Do we want the config file compiled into the kernel?
INCLUDE_CONFIG_FILE opt_config.h
# Options for static filesystems. These should only be used at config
# time, since the corresponding lkms cannot work if there are any static
# dependencies. Unusability is enforced by hiding the defines for the
# options in a never-included header.
CD9660 opt_dontuse.h
CODA opt_dontuse.h
EXT2FS opt_dontuse.h
FDESCFS opt_dontuse.h
HPFS opt_dontuse.h
MSDOSFS opt_dontuse.h
NTFS opt_dontuse.h
NULLFS opt_dontuse.h
NWFS opt_dontuse.h
PORTALFS opt_dontuse.h
PROCFS opt_dontuse.h
PSEUDOFS opt_dontuse.h
REISERFS opt_dontuse.h
SMBFS opt_dontuse.h
TMPFS opt_dontuse.h
UDF opt_dontuse.h
UNIONFS opt_dontuse.h
# Pseudofs debugging
PSEUDOFS_TRACE opt_pseudofs.h
# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
FFS opt_ffs_broken_fixme.h
# These static filesystems have one slightly bogus static dependency in
# sys/i386/i386/autoconf.c. If any of these filesystems are
# statically compiled into the kernel, code for mounting them as root
# filesystems will be enabled - but look below.
NFSCLIENT opt_nfs.h
NFSSERVER opt_nfs.h
NFS4CLIENT opt_nfs.h
# filesystems and libiconv bridge
CD9660_ICONV opt_dontuse.h
MSDOSFS_ICONV opt_dontuse.h
NTFS_ICONV opt_dontuse.h
UDF_ICONV opt_dontuse.h
# If you are following the conditions in the copyright,
# you can enable soft-updates which will speed up a lot of thigs
# and make the system safer from crashes at the same time.
# otherwise a STUB module will be compiled in.
SOFTUPDATES opt_ffs.h
# On small, embedded systems, it can be useful to turn off support for
# snapshots. It saves about 30-40k for a feature that would be lightly
# used, if it is used at all.
NO_FFS_SNAPSHOT opt_ffs.h
# Enabling this option turns on support for Access Control Lists in UFS,
# which can be used to support high security configurations. Depends on
# UFS_EXTATTR.
UFS_ACL opt_ufs.h
# Enabling this option turns on support for extended attributes in UFS-based
# filesystems, which can be used to support high security configurations
# as well as new filesystem features.
UFS_EXTATTR opt_ufs.h
UFS_EXTATTR_AUTOSTART opt_ufs.h
# Enable fast hash lookups for large directories on UFS-based filesystems.
UFS_DIRHASH opt_ufs.h
# Enable gjournal-based UFS journal.
UFS_GJOURNAL opt_ufs.h
# The below sentence is not in English, and neither is this one.
# We plan to remove the static dependences above, with a
# <filesystem>_ROOT option to control if it usable as root. This list
# allows these options to be present in config files already (though
# they won't make any difference yet).
NFS_ROOT opt_nfsroot.h
# SMB/CIFS requester
NETSMB opt_netsmb.h
# Options used only in subr_param.c.
HZ opt_param.h
MAXFILES opt_param.h
NBUF opt_param.h
NSFBUFS opt_param.h
VM_BCACHE_SIZE_MAX opt_param.h
VM_SWZONE_SIZE_MAX opt_param.h
MAXUSERS
DFLDSIZ opt_param.h
MAXDSIZ opt_param.h
MAXSSIZ opt_param.h
# Generic SCSI options.
CAM_MAX_HIGHPOWER opt_cam.h
CAMDEBUG opt_cam.h
CAM_DEBUG_DELAY opt_cam.h
CAM_DEBUG_BUS opt_cam.h
CAM_DEBUG_TARGET opt_cam.h
CAM_DEBUG_LUN opt_cam.h
CAM_DEBUG_FLAGS opt_cam.h
SCSI_DELAY opt_scsi.h
SCSI_NO_SENSE_STRINGS opt_scsi.h
SCSI_NO_OP_STRINGS opt_scsi.h
# Options used only in cam/scsi/scsi_cd.c
CHANGER_MIN_BUSY_SECONDS opt_cd.h
CHANGER_MAX_BUSY_SECONDS opt_cd.h
# Options used only in cam/scsi/scsi_sa.c.
SA_IO_TIMEOUT opt_sa.h
SA_SPACE_TIMEOUT opt_sa.h
SA_REWIND_TIMEOUT opt_sa.h
SA_ERASE_TIMEOUT opt_sa.h
SA_1FM_AT_EOD opt_sa.h
# Options used only in cam/scsi/scsi_pt.c
SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
# Options used only in cam/scsi/scsi_ses.c
SES_ENABLE_PASSTHROUGH opt_ses.h
# Options used in dev/sym/ (Symbios SCSI driver).
SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
# Allows the ncr to take precedence
# 1 (1<<0) -> 810a, 860
# 2 (1<<1) -> 825a, 875, 885, 895
# 4 (1<<2) -> 895a, 896, 1510d
SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
# disabled:0 (default), enabled:1
SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
# disabled:0, enabled:1 (default)
SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
# default:8, range:[1..64]
# Options used only in pci/ncr.c
SCSI_NCR_DEBUG opt_ncr.h
SCSI_NCR_MAX_SYNC opt_ncr.h
SCSI_NCR_MAX_WIDE opt_ncr.h
SCSI_NCR_MYADDR opt_ncr.h
# Options used only in dev/isp/*
ISP_TARGET_MODE opt_isp.h
ISP_FW_CRASH_DUMP opt_isp.h
ISP_DEFAULT_ROLES opt_isp.h
# Options used only in dev/iscsi
ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
# Options used in the 'ata' ATA/ATAPI driver
ATA_STATIC_ID opt_ata.h
ATA_NOPCI opt_ata.h
# Net stuff.
ACCEPT_FILTER_DATA
ACCEPT_FILTER_DNS
ACCEPT_FILTER_HTTP
ALTQ opt_global.h
ALTQ_CBQ opt_altq.h
ALTQ_RED opt_altq.h
ALTQ_RIO opt_altq.h
ALTQ_HFSC opt_altq.h
ALTQ_CDNR opt_altq.h
ALTQ_PRIQ opt_altq.h
ALTQ_NOPCC opt_altq.h
ALTQ_DEBUG opt_altq.h
BOOTP opt_bootp.h
BOOTP_BLOCKSIZE opt_bootp.h
BOOTP_COMPAT opt_bootp.h
BOOTP_NFSROOT opt_bootp.h
BOOTP_NFSV3 opt_bootp.h
BOOTP_WIRED_TO opt_bootp.h
DEVICE_POLLING
DEV_ENC opt_enc.h
DEV_PF opt_pf.h
DEV_PFLOG opt_pf.h
DEV_PFSYNC opt_pf.h
ETHER_II opt_ef.h
ETHER_8023 opt_ef.h
ETHER_8022 opt_ef.h
ETHER_SNAP opt_ef.h
ROUTETABLES opt_route.h
MROUTING opt_mrouting.h
INET opt_inet.h
INET6 opt_inet6.h
IPSEC opt_ipsec.h
IPSEC_DEBUG opt_ipsec.h
IPSEC_FILTERTUNNEL opt_ipsec.h
IPDIVERT
DUMMYNET opt_ipdn.h
IPFILTER opt_ipfilter.h
IPFILTER_LOG opt_ipfilter.h
IPFILTER_LOOKUP opt_ipfilter.h
IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
IPFIREWALL opt_ipfw.h
IPFIREWALL_VERBOSE opt_ipfw.h
IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
IPFIREWALL_FORWARD opt_ipfw.h
IPFIREWALL_NAT opt_ipfw.h
IPSTEALTH
IPX
LIBMBPOOL
LIBMCHAIN
LIBALIAS
MBUF_STRESS_TEST
MBUF_PROFILING
NCP
NETATALK opt_atalk.h
PPP_BSDCOMP opt_ppp.h
PPP_DEFLATE opt_ppp.h
PPP_FILTER opt_ppp.h
RADIX_MPATH opt_mpath.h
SLIP_IFF_OPTS opt_slip.h
TCPDEBUG
TCP_SIGNATURE opt_inet.h
DEV_VLAN opt_vlan.h
VLAN_ARRAY opt_vlan.h
XBONEHACK
KRPC
NFSLOCKD
#
# SCTP
#
SCTP opt_sctp.h
SCTP_DEBUG opt_sctp.h # Enable debug printfs
SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
#
#
#
# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
# Each netgraph node type can be either be compiled into the kernel
# or loaded dynamically. To get the former, include the corresponding
# option below. Each type has its own man page, e.g. ng_async(4).
NETGRAPH
NETGRAPH_DEBUG opt_netgraph.h
NETGRAPH_ASYNC opt_netgraph.h
NETGRAPH_ATMLLC opt_netgraph.h
NETGRAPH_ATM_ATMPIF opt_netgraph.h
NETGRAPH_BLUETOOTH opt_netgraph.h
NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
NETGRAPH_BPF opt_netgraph.h
NETGRAPH_BRIDGE opt_netgraph.h
NETGRAPH_CAR opt_netgraph.h
NETGRAPH_CISCO opt_netgraph.h
NETGRAPH_DEFLATE opt_netgraph.h
NETGRAPH_DEVICE opt_netgraph.h
NETGRAPH_ECHO opt_netgraph.h
NETGRAPH_EIFACE opt_netgraph.h
NETGRAPH_ETHER opt_netgraph.h
NETGRAPH_FEC opt_netgraph.h
NETGRAPH_FRAME_RELAY opt_netgraph.h
NETGRAPH_GIF opt_netgraph.h
NETGRAPH_GIF_DEMUX opt_netgraph.h
NETGRAPH_HOLE opt_netgraph.h
NETGRAPH_IFACE opt_netgraph.h
NETGRAPH_IP_INPUT opt_netgraph.h
NETGRAPH_IPFW opt_netgraph.h
NETGRAPH_KSOCKET opt_netgraph.h
NETGRAPH_L2TP opt_netgraph.h
NETGRAPH_LMI opt_netgraph.h
# MPPC compression requires proprietary files (not included)
NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
NETGRAPH_NAT opt_netgraph.h
NETGRAPH_NETFLOW opt_netgraph.h
NETGRAPH_ONE2MANY opt_netgraph.h
NETGRAPH_PPP opt_netgraph.h
NETGRAPH_PPPOE opt_netgraph.h
NETGRAPH_PPTPGRE opt_netgraph.h
NETGRAPH_PRED1 opt_netgraph.h
NETGRAPH_RFC1490 opt_netgraph.h
NETGRAPH_SOCKET opt_netgraph.h
NETGRAPH_SPLIT opt_netgraph.h
NETGRAPH_SPPP opt_netgraph.h
NETGRAPH_TAG opt_netgraph.h
NETGRAPH_TCPMSS opt_netgraph.h
NETGRAPH_TEE opt_netgraph.h
NETGRAPH_TTY opt_netgraph.h
NETGRAPH_UI opt_netgraph.h
NETGRAPH_VJC opt_netgraph.h
# NgATM options
NGATM_ATM opt_netgraph.h
NGATM_ATMBASE opt_netgraph.h
NGATM_SSCOP opt_netgraph.h
NGATM_SSCFU opt_netgraph.h
NGATM_UNI opt_netgraph.h
NGATM_CCATM opt_netgraph.h
# DRM options
DRM_DEBUG opt_drm.h
ZERO_COPY_SOCKETS opt_zero.h
TI_PRIVATE_JUMBOS opt_ti.h
TI_JUMBO_HDRSPLIT opt_ti.h
# XXX Conflict: # of devices vs network protocol (Native ATM).
# This makes "atm.h" unusable.
NATM
# DPT driver debug flags
DPT_MEASURE_PERFORMANCE opt_dpt.h
DPT_HANDLE_TIMEOUTS opt_dpt.h
DPT_TIMEOUT_FACTOR opt_dpt.h
DPT_LOST_IRQ opt_dpt.h
DPT_RESET_HBA opt_dpt.h
# Misc debug flags. Most of these should probably be replaced with
# 'DEBUG', and then let people recompile just the interesting modules
# with 'make CC="cc -DDEBUG"'.
CLUSTERDEBUG opt_debug_cluster.h
DEBUG_1284 opt_ppb_1284.h
VP0_DEBUG opt_vpo.h
LPT_DEBUG opt_lpt.h
PLIP_DEBUG opt_plip.h
LOCKF_DEBUG opt_debug_lockf.h
NETATALKDEBUG opt_atalk.h
SI_DEBUG opt_debug_si.h
# Fb options
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
# ppbus related options
PERIPH_1284 opt_ppb_1284.h
DONTPROBE_1284 opt_ppb_1284.h
# smbus related options
ENABLE_ALART opt_intpm.h
# These cause changes all over the kernel
BLKDEV_IOSIZE opt_global.h
MAXPHYS opt_global.h
DFLTPHYS opt_global.h
BURN_BRIDGES opt_global.h
DEBUG opt_global.h
DEBUG_LOCKS opt_global.h
DEBUG_VFS_LOCKS opt_global.h
DIAGNOSTIC opt_global.h
INVARIANT_SUPPORT opt_global.h
INVARIANTS opt_global.h
MCLSHIFT opt_global.h
MUTEX_DEBUG opt_global.h
MUTEX_NOINLINE opt_global.h
LOCK_PROFILING opt_global.h
LOCK_PROFILING_FAST opt_global.h
MSIZE opt_global.h
REGRESSION opt_global.h
RESTARTABLE_PANICS opt_global.h
RWLOCK_NOINLINE opt_global.h
SX_NOINLINE opt_global.h
VFS_BIO_DEBUG opt_global.h
# These are VM related options
VM_KMEM_SIZE opt_vm.h
VM_KMEM_SIZE_SCALE opt_vm.h
VM_KMEM_SIZE_MAX opt_vm.h
VM_NRESERVLEVEL opt_vm.h
VM_LEVEL_0_ORDER opt_vm.h
NO_SWAPPING opt_vm.h
MALLOC_MAKE_FAILURES opt_vm.h
MALLOC_PROFILE opt_vm.h
# The MemGuard replacement allocator used for tamper-after-free detection
DEBUG_MEMGUARD opt_vm.h
# The RedZone malloc(9) protection
DEBUG_REDZONE opt_vm.h
# Standard SMP options
SMP opt_global.h
# Size of the kernel message buffer
MSGBUF_SIZE opt_msgbuf.h
# NFS options
NFS_MINATTRTIMO opt_nfs.h
NFS_MAXATTRTIMO opt_nfs.h
NFS_MINDIRATTRTIMO opt_nfs.h
NFS_MAXDIRATTRTIMO opt_nfs.h
NFS_GATHERDELAY opt_nfs.h
NFS_WDELAYHASHSIZ opt_nfs.h
NFS_DEBUG opt_nfs.h
# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
OVERRIDE_CARD opt_bktr.h
OVERRIDE_TUNER opt_bktr.h
OVERRIDE_DBX opt_bktr.h
OVERRIDE_MSP opt_bktr.h
BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
BROOKTREE_ALLOC_PAGES opt_bktr.h
BKTR_OVERRIDE_CARD opt_bktr.h
BKTR_OVERRIDE_TUNER opt_bktr.h
BKTR_OVERRIDE_DBX opt_bktr.h
BKTR_OVERRIDE_MSP opt_bktr.h
BKTR_SYSTEM_DEFAULT opt_bktr.h
BKTR_ALLOC_PAGES opt_bktr.h
BKTR_USE_PLL opt_bktr.h
BKTR_GPIO_ACCESS opt_bktr.h
BKTR_NO_MSP_RESET opt_bktr.h
BKTR_430_FX_MODE opt_bktr.h
BKTR_SIS_VIA_MODE opt_bktr.h
BKTR_USE_FREEBSD_SMBUS opt_bktr.h
BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
BREAK_TO_DEBUGGER opt_comconsole.h
ALT_BREAK_TO_DEBUGGER opt_comconsole.h
# Options to support PPS
UART_PPS_ON_CTS opt_uart.h
# options for bus/device framework
BUS_DEBUG opt_bus.h
# options for USB support
USB_DEBUG opt_usb.h
USBVERBOSE opt_usb.h
UKBD_DFLT_KEYMAP opt_ukbd.h
UPLCOM_INTR_INTERVAL opt_uplcom.h
UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
UVSCOM_INTR_INTERVAL opt_uvscom.h
# Embedded system options
INIT_PATH
ROOTDEVNAME
FDC_DEBUG opt_fdc.h
PCFCLOCK_VERBOSE opt_pcfclock.h
PCFCLOCK_MAX_RETRIES opt_pcfclock.h
KTR opt_global.h
KTR_ALQ opt_ktr.h
KTR_MASK opt_ktr.h
KTR_CPUMASK opt_ktr.h
KTR_COMPILE opt_global.h
KTR_ENTRIES opt_global.h
KTR_VERBOSE opt_ktr.h
WITNESS opt_global.h
WITNESS_KDB opt_witness.h
WITNESS_SKIPSPIN opt_witness.h
# options for ACPI support
ACPI_DEBUG opt_acpi.h
ACPI_MAX_THREADS opt_acpi.h
ACPI_NO_SEMAPHORES opt_acpi.h
# ISA support
DEV_ISA opt_isa.h
ISAPNP opt_isa.h
# various 'device presence' options.
DEV_BPF opt_bpf.h
DEV_MCA opt_mca.h
DEV_CARP opt_carp.h
DEV_PTY opt_tty.h
DEV_SPLASH opt_splash.h
# EISA support
DEV_EISA opt_eisa.h
EISA_SLOTS opt_eisa.h
# ed driver
ED_HPP opt_ed.h
ED_3C503 opt_ed.h
ED_SIC opt_ed.h
# bce driver
BCE_DEBUG opt_bce.h
# wi driver
WI_SYMBOL_FIRMWARE opt_wi.h
SOCKBUF_DEBUG opt_global.h
# options for ubsec driver
UBSEC_DEBUG opt_ubsec.h
UBSEC_RNDTEST opt_ubsec.h
UBSEC_NO_RNG opt_ubsec.h
# options for hifn driver
HIFN_DEBUG opt_hifn.h
HIFN_RNDTEST opt_hifn.h
# options for safenet driver
SAFE_DEBUG opt_safe.h
SAFE_NO_RNG opt_safe.h
SAFE_RNDTEST opt_safe.h
# syscons options
MAXCONS opt_syscons.h
SC_ALT_MOUSE_IMAGE opt_syscons.h
SC_CUT_SPACES2TABS opt_syscons.h
SC_CUT_SEPCHARS opt_syscons.h
SC_DEBUG_LEVEL opt_syscons.h
SC_DFLT_FONT opt_syscons.h
SC_DISABLE_KDBKEY opt_syscons.h
SC_DISABLE_REBOOT opt_syscons.h
SC_HISTORY_SIZE opt_syscons.h
SC_KERNEL_CONS_ATTR opt_syscons.h
SC_KERNEL_CONS_REV_ATTR opt_syscons.h
SC_MOUSE_CHAR opt_syscons.h
SC_NO_CUTPASTE opt_syscons.h
SC_NO_FONT_LOADING opt_syscons.h
SC_NO_HISTORY opt_syscons.h
SC_NO_MODE_CHANGE opt_syscons.h
SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
SC_NO_SYSMOUSE opt_syscons.h
SC_NORM_ATTR opt_syscons.h
SC_NORM_REV_ATTR opt_syscons.h
SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_TWOBUTTON_MOUSE opt_syscons.h
# options for printf
PRINTF_BUFR_SIZE opt_printf.h
# kbd options
KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
KBD_INSTALL_CDEV opt_kbd.h
KBD_MAXRETRY opt_kbd.h
KBD_MAXWAIT opt_kbd.h
KBD_RESETDELAY opt_kbd.h
KBDIO_DEBUG opt_kbd.h
# options for the Atheros driver
ATH_DEBUG opt_ath.h
ATH_TXBUF opt_ath.h
ATH_RXBUF opt_ath.h
ATH_DIAGAPI opt_ath.h
ATH_TX99_DIAG opt_ath.h
# options for the Marvell 8335 wireless driver
MALO_DEBUG opt_malo.h
MALO_TXBUF opt_malo.h
MALO_RXBUF opt_malo.h
# dcons options
DCONS_BUF_SIZE opt_dcons.h
DCONS_POLL_HZ opt_dcons.h
DCONS_FORCE_CONSOLE opt_dcons.h
DCONS_FORCE_GDB opt_dcons.h
# VFS options
LOOKUP_SHARED opt_vfs.h
# HWPMC options
HWPMC_HOOKS
# XBOX options for FreeBSD/i386, but some files are MI
XBOX opt_xbox.h
# XFS
XFS
# Interrupt filtering
INTR_FILTER
# 802.11 support layer
IEEE80211_DEBUG opt_wlan.h
IEEE80211_DEBUG_REFCNT opt_wlan.h
IEEE80211_AMPDU_AGE opt_wlan.h
#Disable code to dispatch tcp offloading
TCP_OFFLOAD_DISABLE opt_inet.h
# Virtualize the network stack
VIMAGE