125 lines
3.5 KiB
HTML
125 lines
3.5 KiB
HTML
<HTML>
|
|
<HEAD>
|
|
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
|
|
<META NAME="GENERATOR" CONTENT="Mozilla/4.01 [en] (Win95; I) [Netscape]">
|
|
<TITLE>Heath WWV/WWVH Receiver
|
|
</TITLE>
|
|
</HEAD>
|
|
<BODY>
|
|
|
|
<H3>
|
|
Heath WWV/WWVH Receiver</H3>
|
|
|
|
<HR>
|
|
<H4>
|
|
Synopsis</H4>
|
|
Address: 127.127.19.<I>u</I>
|
|
<BR>Reference ID: <TT>WWV</TT>
|
|
<BR>Driver ID: <TT>WWV_HEATH</TT>
|
|
<BR>Serial Port: <TT>/dev/heath<I>u</I></TT>; 1200 baud, 8-bits, no parity
|
|
<BR>Features: <TT>tty_clk</TT>
|
|
<BR>Requires: <TT>/usr/include/sys/termios.h</TT> header file with modem
|
|
control
|
|
<H4>
|
|
Description</H4>
|
|
This driver supports the Heath GC-1000 Most Accurate Clock, with RS232C
|
|
Output Accessory. This is a WWV/WWVH receiver somewhat less robust than
|
|
other supported receivers. Its claimed accuracy is 100 ms when actually
|
|
synchronized to the broadcast signal, but this doesn't happen even most
|
|
of the time, due to propagation conditions, ambient noise sources, etc.
|
|
When not synchronized, the accuracy is at the whim of the internal clock
|
|
oscillator, which can wander into the sunset without warning. Since the
|
|
indicated precision is 100 ms, expect a host synchronized only to this
|
|
thing to wander to and fro, occasionally being rudely stepped when the
|
|
offset exceeds the default CLOCK_MAX of 128 ms.
|
|
|
|
<P>The internal DIPswitches should be set to operate at 1200 baud in MANUAL
|
|
mode and the current year. The external DIPswitches should be set to GMT
|
|
and 24-hour format. It is very important that the year be set correctly
|
|
in the DIPswitches; otherwise, the day of year will be incorrect after
|
|
28 April of a normal or leap year.
|
|
|
|
<P>In MANUAL mode the clock responds to a rising edge of the request to
|
|
send (RTS) modem control line by sending the timecode. Therefore, it is
|
|
necessary that the operating system implement the <TT>TIOCMBIC</TT> and
|
|
<TT>TIOCMBIS</TT> ioctl system calls and <TT>TIOCM_RTS</TT> control bit.
|
|
Present restrictions require the use of a POSIX-compatible programming
|
|
interface, although other interfaces may work as well.
|
|
|
|
<P>The clock message consists of 23 ASCII printing characters in the following
|
|
format:
|
|
<PRE>hh:mm:ss.f dd/mm/yr<cr>
|
|
|
|
hh:mm:ss.f = hours, minutes, seconds
|
|
f = deciseconds ('?' when out of spec)
|
|
dd/mm/yr = day, month, year</PRE>
|
|
The alarm condition is indicated by '?', rather than a digit, at A. Note
|
|
that 0?:??:??.? is displayed before synchronization is first established
|
|
and hh:mm:ss.? once synchronization is established and then lost again
|
|
for about a day.
|
|
|
|
<P>A fudge time1 value of .07 s appears to center the clock offset residuals.
|
|
<H4>
|
|
Fudge Factors</H4>
|
|
|
|
<DL>
|
|
<DT>
|
|
<TT>time1 <I>time</I></TT></DT>
|
|
|
|
<DD>
|
|
Specifies the time offset calibration factor, in seconds and fraction,
|
|
with default 0.0.</DD>
|
|
|
|
<DT>
|
|
<TT>time2 <I>time</I></TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver.</DD>
|
|
|
|
<DT>
|
|
<TT>stratum <I>number</I></TT></DT>
|
|
|
|
<DD>
|
|
Specifies the driver stratum, in decimal from 0 to 15, with default 0.</DD>
|
|
|
|
<DT>
|
|
<TT>refid <I>string</I></TT></DT>
|
|
|
|
<DD>
|
|
Specifies the driver reference identifier, an ASCII string from one to
|
|
four characters, with default <TT>WWV</TT>.</DD>
|
|
|
|
<DT>
|
|
<TT>flag1 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver.</DD>
|
|
|
|
<DT>
|
|
<TT>flag2 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver.</DD>
|
|
|
|
<DT>
|
|
<TT>flag3 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver.</DD>
|
|
|
|
<DT>
|
|
<TT>flag4 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver</DD>
|
|
</DL>
|
|
Additional Information
|
|
|
|
<P><A HREF="refclock.htm">Reference Clock Drivers</A>
|
|
<HR>
|
|
<ADDRESS>
|
|
David L. Mills (mills@udel.edu)</ADDRESS>
|
|
|
|
</BODY>
|
|
</HTML>
|