9f3b313382
vbus-supply properties may be specified for each PHY. These properties reference a regulator that we must turn on/off as we turn the PHY on/off. However, if the usbphy comes up before the regulator in question (as is the case with GPIO-controlled regulators), then we will fail to grab a handle to the regulator and control it as the PHY power state changes. Fix it by just attaching the usbphy driver later. We don't really need it at RESOURCE, we just need it to be before DEFAULT when ehci/ohci attach. In particular, this fixes the USB NIC on a board that we don't yet supported- without this, it will not power on and if_ure cannot attach. Tested on: various boards [manu] Tested on: OrangePi R1 [Rap2 (irc)] Reported by: Rap2 (irc, "Cannot find USB NIC")
425 lines
10 KiB
C
425 lines
10 KiB
C
/*-
|
|
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Allwinner USB PHY
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/gpio.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
#include <dev/gpio/gpiobusvar.h>
|
|
|
|
#include <dev/extres/clk/clk.h>
|
|
#include <dev/extres/hwreset/hwreset.h>
|
|
#include <dev/extres/regulator/regulator.h>
|
|
#include <dev/extres/phy/phy.h>
|
|
|
|
#include "phynode_if.h"
|
|
|
|
enum awusbphy_type {
|
|
AWUSBPHY_TYPE_A10 = 1,
|
|
AWUSBPHY_TYPE_A13,
|
|
AWUSBPHY_TYPE_A20,
|
|
AWUSBPHY_TYPE_A31,
|
|
AWUSBPHY_TYPE_H3,
|
|
AWUSBPHY_TYPE_A64,
|
|
AWUSBPHY_TYPE_A83T
|
|
};
|
|
|
|
struct aw_usbphy_conf {
|
|
int num_phys;
|
|
enum awusbphy_type phy_type;
|
|
bool pmu_unk1;
|
|
bool phy0_route;
|
|
};
|
|
|
|
static const struct aw_usbphy_conf a10_usbphy_conf = {
|
|
.num_phys = 3,
|
|
.phy_type = AWUSBPHY_TYPE_A10,
|
|
.pmu_unk1 = false,
|
|
.phy0_route = false,
|
|
};
|
|
|
|
static const struct aw_usbphy_conf a13_usbphy_conf = {
|
|
.num_phys = 2,
|
|
.phy_type = AWUSBPHY_TYPE_A13,
|
|
.pmu_unk1 = false,
|
|
.phy0_route = false,
|
|
};
|
|
|
|
static const struct aw_usbphy_conf a20_usbphy_conf = {
|
|
.num_phys = 3,
|
|
.phy_type = AWUSBPHY_TYPE_A20,
|
|
.pmu_unk1 = false,
|
|
.phy0_route = false,
|
|
};
|
|
|
|
static const struct aw_usbphy_conf a31_usbphy_conf = {
|
|
.num_phys = 3,
|
|
.phy_type = AWUSBPHY_TYPE_A31,
|
|
.pmu_unk1 = false,
|
|
.phy0_route = false,
|
|
};
|
|
|
|
static const struct aw_usbphy_conf h3_usbphy_conf = {
|
|
.num_phys = 4,
|
|
.phy_type = AWUSBPHY_TYPE_H3,
|
|
.pmu_unk1 = true,
|
|
.phy0_route = false,
|
|
};
|
|
|
|
static const struct aw_usbphy_conf a64_usbphy_conf = {
|
|
.num_phys = 2,
|
|
.phy_type = AWUSBPHY_TYPE_A64,
|
|
.pmu_unk1 = true,
|
|
.phy0_route = true,
|
|
};
|
|
|
|
static const struct aw_usbphy_conf a83t_usbphy_conf = {
|
|
.num_phys = 3,
|
|
.phy_type = AWUSBPHY_TYPE_A83T,
|
|
.pmu_unk1 = false,
|
|
.phy0_route = false,
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{ "allwinner,sun4i-a10-usb-phy", (uintptr_t)&a10_usbphy_conf },
|
|
{ "allwinner,sun5i-a13-usb-phy", (uintptr_t)&a13_usbphy_conf },
|
|
{ "allwinner,sun6i-a31-usb-phy", (uintptr_t)&a31_usbphy_conf },
|
|
{ "allwinner,sun7i-a20-usb-phy", (uintptr_t)&a20_usbphy_conf },
|
|
{ "allwinner,sun8i-h3-usb-phy", (uintptr_t)&h3_usbphy_conf },
|
|
{ "allwinner,sun50i-a64-usb-phy", (uintptr_t)&a64_usbphy_conf },
|
|
{ "allwinner,sun8i-a83t-usb-phy", (uintptr_t)&a83t_usbphy_conf },
|
|
{ NULL, 0 }
|
|
};
|
|
|
|
struct awusbphy_softc {
|
|
struct resource * phy_ctrl;
|
|
struct resource ** pmu;
|
|
regulator_t * reg;
|
|
gpio_pin_t id_det_pin;
|
|
int id_det_valid;
|
|
gpio_pin_t vbus_det_pin;
|
|
int vbus_det_valid;
|
|
struct aw_usbphy_conf *phy_conf;
|
|
};
|
|
|
|
/* Phy class and methods. */
|
|
static int awusbphy_phy_enable(struct phynode *phy, bool enable);
|
|
static phynode_method_t awusbphy_phynode_methods[] = {
|
|
PHYNODEMETHOD(phynode_enable, awusbphy_phy_enable),
|
|
|
|
PHYNODEMETHOD_END
|
|
};
|
|
DEFINE_CLASS_1(awusbphy_phynode, awusbphy_phynode_class, awusbphy_phynode_methods,
|
|
0, phynode_class);
|
|
|
|
#define RD4(res, o) bus_read_4(res, (o))
|
|
#define WR4(res, o, v) bus_write_4(res, (o), (v))
|
|
#define CLR4(res, o, m) WR4(res, o, RD4(res, o) & ~(m))
|
|
#define SET4(res, o, m) WR4(res, o, RD4(res, o) | (m))
|
|
|
|
#define OTG_PHY_CFG 0x20
|
|
#define OTG_PHY_ROUTE_OTG (1 << 0)
|
|
#define PMU_IRQ_ENABLE 0x00
|
|
#define PMU_AHB_INCR8 (1 << 10)
|
|
#define PMU_AHB_INCR4 (1 << 9)
|
|
#define PMU_AHB_INCRX_ALIGN (1 << 8)
|
|
#define PMU_ULPI_BYPASS (1 << 0)
|
|
#define PMU_UNK_H3 0x10
|
|
#define PMU_UNK_H3_CLR 0x2
|
|
|
|
static void
|
|
awusbphy_configure(device_t dev, int phyno)
|
|
{
|
|
struct awusbphy_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->pmu[phyno] == NULL)
|
|
return;
|
|
|
|
if (sc->phy_conf->pmu_unk1 == true)
|
|
CLR4(sc->pmu[phyno], PMU_UNK_H3, PMU_UNK_H3_CLR);
|
|
|
|
SET4(sc->pmu[phyno], PMU_IRQ_ENABLE, PMU_ULPI_BYPASS |
|
|
PMU_AHB_INCR8 | PMU_AHB_INCR4 | PMU_AHB_INCRX_ALIGN);
|
|
}
|
|
|
|
static int
|
|
awusbphy_init(device_t dev)
|
|
{
|
|
struct awusbphy_softc *sc;
|
|
phandle_t node;
|
|
char pname[20];
|
|
int error, off, rid;
|
|
regulator_t reg;
|
|
hwreset_t rst;
|
|
clk_t clk;
|
|
|
|
sc = device_get_softc(dev);
|
|
node = ofw_bus_get_node(dev);
|
|
|
|
sc->phy_conf = (struct aw_usbphy_conf *)ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
|
|
|
/* Get phy_ctrl region */
|
|
if (ofw_bus_find_string_index(node, "reg-names", "phy_ctrl", &rid) != 0) {
|
|
device_printf(dev, "Cannot locate phy control resource\n");
|
|
return (ENXIO);
|
|
}
|
|
sc->phy_ctrl = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->phy_ctrl == NULL) {
|
|
device_printf(dev, "Cannot allocate resource\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Enable clocks */
|
|
for (off = 0; clk_get_by_ofw_index(dev, 0, off, &clk) == 0; off++) {
|
|
error = clk_enable(clk);
|
|
if (error != 0) {
|
|
device_printf(dev, "couldn't enable clock %s\n",
|
|
clk_get_name(clk));
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* De-assert resets */
|
|
for (off = 0; hwreset_get_by_ofw_idx(dev, 0, off, &rst) == 0; off++) {
|
|
error = hwreset_deassert(rst);
|
|
if (error != 0) {
|
|
device_printf(dev, "couldn't de-assert reset %d\n",
|
|
off);
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* Get GPIOs */
|
|
error = gpio_pin_get_by_ofw_property(dev, node, "usb0_id_det-gpios",
|
|
&sc->id_det_pin);
|
|
if (error == 0)
|
|
sc->id_det_valid = 1;
|
|
error = gpio_pin_get_by_ofw_property(dev, node, "usb0_vbus_det-gpios",
|
|
&sc->vbus_det_pin);
|
|
if (error == 0)
|
|
sc->vbus_det_valid = 1;
|
|
|
|
sc->reg = malloc(sizeof(*(sc->reg)) * sc->phy_conf->num_phys, M_DEVBUF,
|
|
M_WAITOK | M_ZERO);
|
|
sc->pmu = malloc(sizeof(*(sc->pmu)) * sc->phy_conf->num_phys, M_DEVBUF,
|
|
M_WAITOK | M_ZERO);
|
|
/* Get regulators */
|
|
for (off = 0; off < sc->phy_conf->num_phys; off++) {
|
|
snprintf(pname, sizeof(pname), "usb%d_vbus-supply", off);
|
|
if (regulator_get_by_ofw_property(dev, 0, pname, ®) == 0)
|
|
sc->reg[off] = reg;
|
|
|
|
snprintf(pname, sizeof(pname), "pmu%d", off);
|
|
if (ofw_bus_find_string_index(node, "reg-names",
|
|
pname, &rid) != 0)
|
|
continue;
|
|
|
|
sc->pmu[off] = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->pmu[off] == NULL) {
|
|
device_printf(dev, "Cannot allocate resource\n");
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
awusbphy_vbus_detect(device_t dev, int *val)
|
|
{
|
|
struct awusbphy_softc *sc;
|
|
bool active;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->vbus_det_valid) {
|
|
error = gpio_pin_is_active(sc->vbus_det_pin, &active);
|
|
if (error != 0) {
|
|
device_printf(dev, "Cannot get status of id pin %d\n",
|
|
error);
|
|
return (error);
|
|
}
|
|
*val = active;
|
|
return (0);
|
|
}
|
|
|
|
*val = 1;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
awusbphy_phy_enable(struct phynode *phynode, bool enable)
|
|
{
|
|
device_t dev;
|
|
intptr_t phy;
|
|
struct awusbphy_softc *sc;
|
|
regulator_t reg;
|
|
int error, vbus_det;
|
|
|
|
dev = phynode_get_device(phynode);
|
|
phy = phynode_get_id(phynode);
|
|
sc = device_get_softc(dev);
|
|
|
|
if (phy < 0 || phy >= sc->phy_conf->num_phys)
|
|
return (ERANGE);
|
|
|
|
/* Configure PHY */
|
|
awusbphy_configure(dev, phy);
|
|
|
|
/* Regulators are optional. If not found, return success. */
|
|
reg = sc->reg[phy];
|
|
if (reg == NULL)
|
|
return (0);
|
|
|
|
if (enable) {
|
|
/* If an external vbus is detected, do not enable phy 0 */
|
|
if (phy == 0) {
|
|
error = awusbphy_vbus_detect(dev, &vbus_det);
|
|
if (error)
|
|
goto out;
|
|
|
|
/* Depending on the PHY we need to route OTG to OHCI/EHCI */
|
|
if (sc->phy_conf->phy0_route == true) {
|
|
if (vbus_det == 0)
|
|
/* Host mode */
|
|
CLR4(sc->phy_ctrl, OTG_PHY_CFG,
|
|
OTG_PHY_ROUTE_OTG);
|
|
else
|
|
/* Peripheral mode */
|
|
SET4(sc->phy_ctrl, OTG_PHY_CFG,
|
|
OTG_PHY_ROUTE_OTG);
|
|
}
|
|
if (vbus_det == 1)
|
|
return (0);
|
|
} else
|
|
error = 0;
|
|
if (error == 0)
|
|
error = regulator_enable(reg);
|
|
} else
|
|
error = regulator_disable(reg);
|
|
|
|
out:
|
|
if (error != 0) {
|
|
device_printf(dev,
|
|
"couldn't %s regulator for phy %jd\n",
|
|
enable ? "enable" : "disable", (intmax_t)phy);
|
|
return (error);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
awusbphy_probe(device_t dev)
|
|
{
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Allwinner USB PHY");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
awusbphy_attach(device_t dev)
|
|
{
|
|
int error;
|
|
struct phynode *phynode;
|
|
struct phynode_init_def phy_init;
|
|
struct awusbphy_softc *sc;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
error = awusbphy_init(dev);
|
|
if (error) {
|
|
device_printf(dev, "failed to initialize USB PHY, error %d\n",
|
|
error);
|
|
return (error);
|
|
}
|
|
|
|
/* Create and register phys. */
|
|
for (i = 0; i < sc->phy_conf->num_phys; i++) {
|
|
bzero(&phy_init, sizeof(phy_init));
|
|
phy_init.id = i;
|
|
phy_init.ofw_node = ofw_bus_get_node(dev);
|
|
phynode = phynode_create(dev, &awusbphy_phynode_class,
|
|
&phy_init);
|
|
if (phynode == NULL) {
|
|
device_printf(dev, "failed to create USB PHY\n");
|
|
return (ENXIO);
|
|
}
|
|
if (phynode_register(phynode) == NULL) {
|
|
device_printf(dev, "failed to create USB PHY\n");
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t awusbphy_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, awusbphy_probe),
|
|
DEVMETHOD(device_attach, awusbphy_attach),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t awusbphy_driver = {
|
|
"awusbphy",
|
|
awusbphy_methods,
|
|
sizeof(struct awusbphy_softc)
|
|
};
|
|
|
|
static devclass_t awusbphy_devclass;
|
|
/* aw_usbphy needs to come up after regulators/gpio/etc, but before ehci/ohci */
|
|
EARLY_DRIVER_MODULE(awusbphy, simplebus, awusbphy_driver, awusbphy_devclass,
|
|
0, 0, BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE);
|
|
MODULE_VERSION(awusbphy, 1);
|