freebsd-skq/sys/dev/dwc/if_dwc.h
2014-09-25 18:03:14 +00:00

263 lines
9.6 KiB
C

/*-
* Copyright (c) 2014 Ruslan Bukin <br@bsdpad.com>
* All rights reserved.
*
* This software was developed by SRI International and the University of
* Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
* ("CTSRD"), as part of the DARPA CRASH research programme.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Register names were taken almost as is from the documentation.
*/
#define MAC_CONFIGURATION 0x0
#define CONF_JD (1 << 22) /* jabber timer disable */
#define CONF_BE (1 << 21) /* Frame Burst Enable */
#define CONF_PS (1 << 15) /* GMII/MII */
#define CONF_FES (1 << 14) /* MII speed select */
#define CONF_DM (1 << 11) /* Full Duplex Enable */
#define CONF_ACS (1 << 7)
#define CONF_TE (1 << 3)
#define CONF_RE (1 << 2)
#define MAC_FRAME_FILTER 0x4
#define FRAME_FILTER_RA (1 << 31) /* Receive All */
#define FRAME_FILTER_HPF (1 << 10) /* Hash or Perfect Filter */
#define FRAME_FILTER_PM (1 << 4) /* Pass multicast */
#define FRAME_FILTER_HMC (1 << 2)
#define FRAME_FILTER_HUC (1 << 1)
#define FRAME_FILTER_PR (1 << 0) /* All Incoming Frames */
#define GMII_ADDRESS 0x10
#define GMII_ADDRESS_PA_MASK 0x1f /* Phy device */
#define GMII_ADDRESS_PA_SHIFT 11
#define GMII_ADDRESS_GR_MASK 0x1f /* Phy register */
#define GMII_ADDRESS_GR_SHIFT 6
#define GMII_ADDRESS_CR_MASK 0xf
#define GMII_ADDRESS_CR_SHIFT 2 /* Clock */
#define GMII_ADDRESS_GW (1 << 1) /* Write operation */
#define GMII_ADDRESS_GB (1 << 0) /* Busy */
#define GMII_DATA 0x14
#define FLOW_CONTROL 0x18
#define GMAC_VLAN_TAG 0x1C
#define VERSION 0x20
#define DEBUG 0x24
#define LPI_CONTROL_STATUS 0x30
#define LPI_TIMERS_CONTROL 0x34
#define INTERRUPT_STATUS 0x38
#define INTERRUPT_MASK 0x3C
#define MAC_ADDRESS_HIGH(n) ((n > 15 ? 0x800 : 0x40) + 0x8 * n)
#define MAC_ADDRESS_LOW(n) ((n > 15 ? 0x804 : 0x44) + 0x8 * n)
#define SGMII_RGMII_SMII_CTRL_STATUS 0xD8
#define MMC_CONTROL 0x100
#define MMC_CONTROL_CNTRST (1 << 0)
#define MMC_RECEIVE_INTERRUPT 0x104
#define MMC_TRANSMIT_INTERRUPT 0x108
#define MMC_RECEIVE_INTERRUPT_MASK 0x10C
#define MMC_TRANSMIT_INTERRUPT_MASK 0x110
#define TXOCTETCOUNT_GB 0x114
#define TXFRAMECOUNT_GB 0x118
#define TXBROADCASTFRAMES_G 0x11C
#define TXMULTICASTFRAMES_G 0x120
#define TX64OCTETS_GB 0x124
#define TX65TO127OCTETS_GB 0x128
#define TX128TO255OCTETS_GB 0x12C
#define TX256TO511OCTETS_GB 0x130
#define TX512TO1023OCTETS_GB 0x134
#define TX1024TOMAXOCTETS_GB 0x138
#define TXUNICASTFRAMES_GB 0x13C
#define TXMULTICASTFRAMES_GB 0x140
#define TXBROADCASTFRAMES_GB 0x144
#define TXUNDERFLOWERROR 0x148
#define TXSINGLECOL_G 0x14C
#define TXMULTICOL_G 0x150
#define TXDEFERRED 0x154
#define TXLATECOL 0x158
#define TXEXESSCOL 0x15C
#define TXCARRIERERR 0x160
#define TXOCTETCNT 0x164
#define TXFRAMECOUNT_G 0x168
#define TXEXCESSDEF 0x16C
#define TXPAUSEFRAMES 0x170
#define TXVLANFRAMES_G 0x174
#define TXOVERSIZE_G 0x178
#define RXFRAMECOUNT_GB 0x180
#define RXOCTETCOUNT_GB 0x184
#define RXOCTETCOUNT_G 0x188
#define RXBROADCASTFRAMES_G 0x18C
#define RXMULTICASTFRAMES_G 0x190
#define RXCRCERROR 0x194
#define RXALIGNMENTERROR 0x198
#define RXRUNTERROR 0x19C
#define RXJABBERERROR 0x1A0
#define RXUNDERSIZE_G 0x1A4
#define RXOVERSIZE_G 0x1A8
#define RX64OCTETS_GB 0x1AC
#define RX65TO127OCTETS_GB 0x1B0
#define RX128TO255OCTETS_GB 0x1B4
#define RX256TO511OCTETS_GB 0x1B8
#define RX512TO1023OCTETS_GB 0x1BC
#define RX1024TOMAXOCTETS_GB 0x1C0
#define RXUNICASTFRAMES_G 0x1C4
#define RXLENGTHERROR 0x1C8
#define RXOUTOFRANGETYPE 0x1CC
#define RXPAUSEFRAMES 0x1D0
#define RXFIFOOVERFLOW 0x1D4
#define RXVLANFRAMES_GB 0x1D8
#define RXWATCHDOGERROR 0x1DC
#define RXRCVERROR 0x1E0
#define RXCTRLFRAMES_G 0x1E4
#define MMC_IPC_RECEIVE_INT_MASK 0x200
#define MMC_IPC_RECEIVE_INT 0x208
#define RXIPV4_GD_FRMS 0x210
#define RXIPV4_HDRERR_FRMS 0x214
#define RXIPV4_NOPAY_FRMS 0x218
#define RXIPV4_FRAG_FRMS 0x21C
#define RXIPV4_UDSBL_FRMS 0x220
#define RXIPV6_GD_FRMS 0x224
#define RXIPV6_HDRERR_FRMS 0x228
#define RXIPV6_NOPAY_FRMS 0x22C
#define RXUDP_GD_FRMS 0x230
#define RXUDP_ERR_FRMS 0x234
#define RXTCP_GD_FRMS 0x238
#define RXTCP_ERR_FRMS 0x23C
#define RXICMP_GD_FRMS 0x240
#define RXICMP_ERR_FRMS 0x244
#define RXIPV4_GD_OCTETS 0x250
#define RXIPV4_HDRERR_OCTETS 0x254
#define RXIPV4_NOPAY_OCTETS 0x258
#define RXIPV4_FRAG_OCTETS 0x25C
#define RXIPV4_UDSBL_OCTETS 0x260
#define RXIPV6_GD_OCTETS 0x264
#define RXIPV6_HDRERR_OCTETS 0x268
#define RXIPV6_NOPAY_OCTETS 0x26C
#define RXUDP_GD_OCTETS 0x270
#define RXUDP_ERR_OCTETS 0x274
#define RXTCP_GD_OCTETS 0x278
#define RXTCPERROCTETS 0x27C
#define RXICMP_GD_OCTETS 0x280
#define RXICMP_ERR_OCTETS 0x284
#define L3_L4_CONTROL0 0x400
#define LAYER4_ADDRESS0 0x404
#define LAYER3_ADDR0_REG0 0x410
#define LAYER3_ADDR1_REG0 0x414
#define LAYER3_ADDR2_REG0 0x418
#define LAYER3_ADDR3_REG0 0x41C
#define L3_L4_CONTROL1 0x430
#define LAYER4_ADDRESS1 0x434
#define LAYER3_ADDR0_REG1 0x440
#define LAYER3_ADDR1_REG1 0x444
#define LAYER3_ADDR2_REG1 0x448
#define LAYER3_ADDR3_REG1 0x44C
#define L3_L4_CONTROL2 0x460
#define LAYER4_ADDRESS2 0x464
#define LAYER3_ADDR0_REG2 0x470
#define LAYER3_ADDR1_REG2 0x474
#define LAYER3_ADDR2_REG2 0x478
#define LAYER3_ADDR3_REG2 0x47C
#define L3_L4_CONTROL3 0x490
#define LAYER4_ADDRESS3 0x494
#define LAYER3_ADDR0_REG3 0x4A0
#define LAYER3_ADDR1_REG3 0x4A4
#define LAYER3_ADDR2_REG3 0x4A8
#define LAYER3_ADDR3_REG3 0x4AC
#define HASH_TABLE_REG(n) 0x500 + (0x4 * n)
#define VLAN_INCL_REG 0x584
#define VLAN_HASH_TABLE_REG 0x588
#define TIMESTAMP_CONTROL 0x700
#define SUB_SECOND_INCREMENT 0x704
#define SYSTEM_TIME_SECONDS 0x708
#define SYSTEM_TIME_NANOSECONDS 0x70C
#define SYSTEM_TIME_SECONDS_UPDATE 0x710
#define SYSTEM_TIME_NANOSECONDS_UPDATE 0x714
#define TIMESTAMP_ADDEND 0x718
#define TARGET_TIME_SECONDS 0x71C
#define TARGET_TIME_NANOSECONDS 0x720
#define SYSTEM_TIME_HIGHER_WORD_SECONDS 0x724
#define TIMESTAMP_STATUS 0x728
#define PPS_CONTROL 0x72C
#define AUXILIARY_TIMESTAMP_NANOSECONDS 0x730
#define AUXILIARY_TIMESTAMP_SECONDS 0x734
#define PPS0_INTERVAL 0x760
#define PPS0_WIDTH 0x764
/* DMA */
#define BUS_MODE 0x1000
#define BUS_MODE_EIGHTXPBL (1 << 24) /* Multiplies PBL by 8 */
#define BUS_MODE_PBL_SHIFT 8 /* Single block transfer size */
#define BUS_MODE_PBL_BEATS_8 8
#define BUS_MODE_SWR (1 << 0) /* Reset */
#define TRANSMIT_POLL_DEMAND 0x1004
#define RECEIVE_POLL_DEMAND 0x1008
#define RX_DESCR_LIST_ADDR 0x100C
#define TX_DESCR_LIST_ADDR 0x1010
#define DMA_STATUS 0x1014
#define DMA_STATUS_NIS (1 << 16)
#define DMA_STATUS_AIS (1 << 15)
#define DMA_STATUS_FBI (1 << 13)
#define DMA_STATUS_RI (1 << 6)
#define DMA_STATUS_TI (1 << 0)
#define DMA_STATUS_INTR_MASK 0x1ffff
#define OPERATION_MODE 0x1018
#define MODE_RSF (1 << 25) /* RX Full Frame */
#define MODE_TSF (1 << 21) /* TX Full Frame */
#define MODE_FTF (1 << 20) /* Flush TX FIFO */
#define MODE_ST (1 << 13) /* Start DMA TX */
#define MODE_FUF (1 << 6) /* TX frames < 64bytes */
#define MODE_RTC_LEV32 0x1
#define MODE_RTC_SHIFT 3
#define MODE_OSF (1 << 2) /* Process Second frame */
#define MODE_SR (1 << 1) /* Start DMA RX */
#define INTERRUPT_ENABLE 0x101C
#define INT_EN_NIE (1 << 16) /* Normal/Summary */
#define INT_EN_AIE (1 << 15) /* Abnormal/Summary */
#define INT_EN_ERE (1 << 14) /* Early receive */
#define INT_EN_FBE (1 << 13) /* Fatal bus error */
#define INT_EN_ETE (1 << 10) /* Early transmit */
#define INT_EN_RWE (1 << 9) /* Receive watchdog */
#define INT_EN_RSE (1 << 8) /* Receive stopped */
#define INT_EN_RUE (1 << 7) /* Recv buf unavailable */
#define INT_EN_RIE (1 << 6) /* Receive interrupt */
#define INT_EN_UNE (1 << 5) /* Tx underflow */
#define INT_EN_OVE (1 << 4) /* Receive overflow */
#define INT_EN_TJE (1 << 3) /* Transmit jabber */
#define INT_EN_TUE (1 << 2) /* Tx. buf unavailable */
#define INT_EN_TSE (1 << 1) /* Transmit stopped */
#define INT_EN_TIE (1 << 0) /* Transmit interrupt */
#define INT_EN_DEFAULT (INT_EN_TIE|INT_EN_RIE| \
INT_EN_NIE|INT_EN_AIE| \
INT_EN_FBE|INT_EN_UNE)
#define MISSED_FRAMEBUF_OVERFLOW_CNTR 0x1020
#define RECEIVE_INT_WATCHDOG_TMR 0x1024
#define AXI_BUS_MODE 0x1028
#define AHB_OR_AXI_STATUS 0x102C
#define CURRENT_HOST_TRANSMIT_DESCR 0x1048
#define CURRENT_HOST_RECEIVE_DESCR 0x104C
#define CURRENT_HOST_TRANSMIT_BUF_ADDR 0x1050
#define CURRENT_HOST_RECEIVE_BUF_ADDR 0x1054
#define HW_FEATURE 0x1058