freebsd-skq/sys/dev/pms/RefTisa/sallsdk/spc/sadefs.h

321 lines
14 KiB
C

/*******************************************************************************
*Copyright (c) 2014 PMC-Sierra, Inc. All rights reserved.
*
*Redistribution and use in source and binary forms, with or without modification, are permitted provided
*that the following conditions are met:
*1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
*following disclaimer.
*2. Redistributions in binary form must reproduce the above copyright notice,
*this list of conditions and the following disclaimer in the documentation and/or other materials provided
*with the distribution.
*
*THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
*WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
*FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
*FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
*NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
*BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
*LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
*SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
*
* $FreeBSD$
*
********************************************************************************/
/*******************************************************************************/
/*! \file sadefs.h
* \brief The file defines the constants used by LL layer
*/
/*******************************************************************************/
#ifndef __SADEFS_H__
#define __SADEFS_H__
#define SA_LL_IBQ_PROTECT
#define AGSA_MAX_VALID_PORTS AGSA_MAX_VALID_PHYS /**< defines the maximum number of ports */
#define NUM_TIMERS 2 /**< defines the maximum number of timers */
#define SA_USECS_PER_TICK 1000000 /**< defines the heart beat of the LL layer 1us */
#define MAX_ACTIVE_IO_REQUESTS 4096 /**< Maximum Active IO Requests */
#define SMP_RESPONSE_FRAMES AGSA_MAX_VALID_PHYS /**< SMP Response Frame Buffer */
#define MAX_NUM_VECTOR 64 /**< Maximum Number of Interrupt Vectors */
#define REGISTER_DUMP_BUFF_SIZE 0x4000 /**< Maximum Fatal Error Register Dump Buffer Size */
#define KBYTES 1024
/* number of IQ/OQ */
#define IQ_NUM_32 32
#define OQ_NUM_32 32
/* default value of Inbound/Outbound element size */
#define INBOUND_DEPTH_SIZE 512
#define OUTBOUND_DEPTH_SIZE 512
/* Priority of Queue */
#define MPI_QUEUE_NORMAL 0
#define MPI_QUEUE_PRIORITY 1
/* size of IOMB - multiple with 32 bytes */
#define IOMB_SIZE64 64
#define IOMB_SIZE96 96
#define IOMB_SIZE128 128
#define IOMB_SIZE256 256
/* DIR bit of IOMB for SSP read/write command */
#define DIR_NODATA 0x000
#define DIR_READ 0x100
#define DIR_WRITE 0x200
/* TLR bits mask */
#define TLR_MASK 0x00000003
/* port and phy Id bits Mask */
#define PORTID_MASK 0x0000000F
#define PORTID_V_MASK 0x000000FF
#define PHYID_MASK 0x0000000F
#define PHYID_V_MASK 0x000000FF
#define PORT_STATE_MASK 0x0000000F
#define PHY_IN_PORT_MASK 0x000000F0
#define SM_PHYID_MASK (smIS_SPC(agRoot) ? PHYID_MASK : PHYID_V_MASK )
#define SM_PORTID_MASK (smIS_SPC(agRoot) ? PORTID_MASK : PORTID_V_MASK )
/* the index for memory requirement, must be continious */
#define LLROOT_MEM_INDEX 0 /**< the index of root memory */
#define DEVICELINK_MEM_INDEX (LLROOT_MEM_INDEX + 1) /**< the index of device descriptors memory */
#define IOREQLINK_MEM_INDEX (DEVICELINK_MEM_INDEX+1) /**< the index of IO requests memory */
#ifdef SA_ENABLE_HDA_FUNCTIONS
#define HDA_DMA_BUFFER (IOREQLINK_MEM_INDEX+1) /** HDA Buffer */
#else /* SA_ENABLE_HDA_FUNCTIONS */
#define HDA_DMA_BUFFER (IOREQLINK_MEM_INDEX) /** HDA Buffer */
#endif /* SA_ENABLE_HDA_FUNCTIONS */
#ifdef SA_ENABLE_TRACE_FUNCTIONS
#define LL_FUNCTION_TRACE (HDA_DMA_BUFFER+1) /**TraceLog */
#else /* SA_ENABLE_TRACE_FUNCTIONS */
#define LL_FUNCTION_TRACE HDA_DMA_BUFFER /**TraceLog */
#endif /* END SA_ENABLE_TRACE_FUNCTIONS */
#define TIMERLINK_MEM_INDEX (LL_FUNCTION_TRACE+1) /**< the index of timers memory */
#ifdef FAST_IO_TEST
#define LL_FAST_IO (TIMERLINK_MEM_INDEX+1)
#define MPI_IBQ_OBQ_INDEX (LL_FAST_IO + 1)
#else /* FAST_IO_TEST */
#define LL_FAST_IO TIMERLINK_MEM_INDEX
#define MPI_IBQ_OBQ_INDEX (LL_FAST_IO + 1)
#endif /* FAST_IO_TEST */
#define MPI_MEM_INDEX (MPI_IBQ_OBQ_INDEX - LLROOT_MEM_INDEX)
#define MPI_EVENTLOG_INDEX 0
#define MPI_IOP_EVENTLOG_INDEX 1
#define MPI_CI_INDEX 2
/* The following is a reference index */
#define MPI_PI_INDEX (MPI_CI_INDEX + 1)
#define MPI_IBQ_INDEX (MPI_PI_INDEX + 1)
#define MPI_OBQ_INDEX (MPI_IBQ_INDEX + MPI_MAX_INBOUND_QUEUES)
#define TOTAL_MPI_MEM_CHUNKS (MPI_MAX_INBOUND_QUEUES * 2) + MPI_IBQ_INDEX
#define LL_DEVICE_LOCK 0
#define LL_PORT_LOCK (LL_DEVICE_LOCK+1)
#define LL_TIMER_LOCK (LL_PORT_LOCK+1)
#define LL_IOREQ_LOCKEQ_LOCK (LL_TIMER_LOCK+1)
#ifdef FAST_IO_TEST
#define LL_FAST_IO_LOCK (LL_IOREQ_LOCKEQ_LOCK+1)
#else /* FAST_IO_TEST */
#define LL_FAST_IO_LOCK (LL_IOREQ_LOCKEQ_LOCK)
#endif /* FAST_IO_TEST */
#ifdef SA_ENABLE_TRACE_FUNCTIONS
#define LL_TRACE_LOCK (LL_FAST_IO_LOCK+1)
#else /* SA_ENABLE_TRACE_FUNCTIONS */
#define LL_TRACE_LOCK (LL_FAST_IO_LOCK)
#endif /* SA_ENABLE_TRACE_FUNCTIONS */
#ifdef MPI_DEBUG_TRACE_ENABLE
#define LL_IOMB_TRACE_LOCK (LL_TRACE_LOCK+1)
#else /* MPI_DEBUG_TRACE_ENABLE */
#define LL_IOMB_TRACE_LOCK (LL_TRACE_LOCK)
#endif /* MPI_DEBUG_TRACE_ENABLE */
#define LL_IOREQ_OBQ_LOCK (LL_IOMB_TRACE_LOCK+1)
#define LL_IOREQ_IBQ_LOCK (LL_IOREQ_OBQ_LOCK +1)
#define LL_IOREQ_IBQ_LOCK_PARM (LL_IOREQ_OBQ_LOCK + queueConfig->numOutboundQueues +1)
#define LL_IOREQ_IBQ0_LOCK (LL_IOREQ_OBQ_LOCK + saRoot->QueueConfig.numOutboundQueues +1)
/* define phy states */
#define PHY_STOPPED 0x00000000 /**< flag indicates phy stopped */
#define PHY_UP 0x00000001 /**< flag indicates phy up */
#define PHY_DOWN 0x00000002 /**< flag indicates phy down */
/* define port states */
#define PORT_NORMAL 0x0000
#define PORT_INVALIDATING 0x0002
/* define chip status */
#define CHIP_NORMAL 0x0000
#define CHIP_SHUTDOWN 0x0001
#define CHIP_RESETTING 0x0002
#define CHIP_RESET_FW 0x0004
#define CHIP_FATAL_ERROR 0x0008
/* define device types */
#define SAS_SATA_UNKNOWN_DEVICE 0xFF /**< SAS SATA unknown device type */
#define STP_DEVICE 0x00 /**< SATA device behind an expander */
#define SSP_SMP_DEVICE 0x01 /**< SSP or SMP device type */
#define DIRECT_SATA_DEVICE 0x02 /**< SATA direct device type */
/* SATA */
#define SATA_FIS_MASK 0x00000001
#define MAX_SATARESP_SUPPORT_BYTES 44
#define MARK_OFF 0xFFFFFFFF
#define PORT_MARK_OFF 0xFFFFFFFF
#define NO_FATAL_ERROR_VECTOR 0xFFFFFFFF
#define SATA_PROTOCOL_RSRT_ASSERT 0x01
#define SATA_PROTOCOL_RSRT_DEASSERT 0x02
#define SATA_NON_DATA_PROTOCOL 0x0d
#define SATA_PIO_READ_PROTOCOL 0x0e
#define SATA_DMA_READ_PROTOCOL 0x0f
#define SATA_FPDMA_READ_PROTOCOL 0x10
#define SATA_PIO_WRITE_PROTOCOL 0x11
#define SATA_DMA_WRITE_PROTOCOL 0x12
#define SATA_FPDMA_WRITE_PROTOCOL 0x13
#define SATA_DEVICE_RESET_PROTOCOL 0x14
/* Definition for bit shift */
#define SHIFT0 0
#define SHIFT1 1
#define SHIFT2 2
#define SHIFT3 3
#define SHIFT4 4
#define SHIFT5 5
#define SHIFT6 6
#define SHIFT7 7
#define SHIFT8 8
#define SHIFT9 9
#define SHIFT10 10
#define SHIFT11 11
#define SHIFT12 12
#define SHIFT13 13
#define SHIFT14 14
#define SHIFT15 15
#define SHIFT16 16
#define SHIFT17 17
#define SHIFT18 18
#define SHIFT19 19
#define SHIFT20 20
#define SHIFT21 21
#define SHIFT22 22
#define SHIFT23 23
#define SHIFT24 24
#define SHIFT25 25
#define SHIFT26 26
#define SHIFT27 27
#define SHIFT28 28
#define SHIFT29 29
#define SHIFT30 30
#define SHIFT31 31
/* These flags used for saSSPAbort(), saSATAAbort() */
#define ABORT_MASK 0x3
#define ABORT_SINGLE 0x0
#define ABORT_SCOPE 0x3 /* bits 0-1*/
#define ABORT_ALL 0x1
#define ABORT_TSDK_QUARANTINE 0x4
#define ABORT_QUARANTINE_SPC 0x4
#define ABORT_QUARANTINE_SPCV 0x8
/* These flags used for saGetRegDump() */
#define REG_DUMP_NUM0 0x0
#define REG_DUMP_NUM1 0x1
#define REG_DUMP_NONFLASH 0x0
#define REG_DUMP_FLASH 0x1
/* MSIX Interupts */
#define MSIX_TABLE_OFFSET 0x2000
#define MSIX_TABLE_ELEMENT_SIZE 0x10
#define MSIX_INTERRUPT_CONTROL_OFFSET 0xC
#define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET+MSIX_INTERRUPT_CONTROL_OFFSET)
#define MSIX_INTERRUPT_DISABLE 0x1
#define MSIX_INTERRUPT_ENABLE 0x0
#define MAX_QUEUE_EACH_MEM 8
#define NUM_MEM_CHUNKS(Q, rem) ((((bit32)Q % rem) > 0) ? (bit32)(Q/rem+1) : (bit32)(Q/rem))
#define NUM_QUEUES_IN_MEM(Q, rem) ((((bit32)Q % rem) > 0) ? (bit32)(Q%rem) : (bit32)(MAX_QUEUE_EACH_MEM))
#define MAX_DEV_BITS 0xFFFF0000
#define PHY_COUNT_BITS 0x01f80000
#define Q_SUPPORT_BITS 0x0007ffff
#define SAS_SPEC_BITS 0xfe000000
#define HP_SUPPORT_BIT 0x00010000
#define INT_COL_BIT 0x00040000
#define INT_DELAY_BITS 0xFFFF
#define INT_THR_BITS 0xFF
#define INT_VEC_BITS 0xFF
#define AUTO_HARD_RESET_DEREG_FLAG 0x00000001
#define AUTO_FW_CLEANUP_DEREG_FLAG 0x00000002
#define BYTE_MASK 0xff
#define INT_OPTION 0x7FFF
#define SMP_TO_DEFAULT 100
#define ITL_TO_DEFAULT 0xFFFF
/*
agsaHwConfig_s hwOption
*/
#define HW_CFG_PICI_EFFECTIVE_ADDRESS 0x1
/* SPC or SPCv ven dev Id */
#define SUBID_SPC 0x00000000
#define SUBID_SPCV 0x56781234
#define VEN_DEV_SPC 0x80010000
#define VEN_DEV_HIL 0x80810000
#define VEN_DEV_SPCV 0x80080000
#define VEN_DEV_SPCVE 0x80090000
#define VEN_DEV_SPCVP 0x80180000
#define VEN_DEV_SPCVEP 0x80190000
#define VEN_DEV_SPC12V 0x80700000
#define VEN_DEV_SPC12VE 0x80710000
#define VEN_DEV_SPC12VP 0x80720000
#define VEN_DEV_SPC12VEP 0x80730000
#define VEN_DEV_9015 0x90150000
#define VEN_DEV_9060 0x90600000
#define VEN_DEV_ADAPVEP 0x80890000
#define VEN_DEV_ADAPVP 0x80880000
#define VEN_DEV_SFC 0x80250000
/*DelRay PCIid */
#define VEN_DEV_SPC12ADP 0x80740000 /* 8 ports */
#define VEN_DEV_SPC12ADPE 0x80750000 /* 8 ports encrypt */
#define VEN_DEV_SPC12ADPP 0x80760000 /* 16 ports */
#define VEN_DEV_SPC12ADPEP 0x80770000 /* 16 ports encrypt */
#define VEN_DEV_SPC12SATA 0x80060000 /* SATA HBA */
#endif /*__SADEFS_H__ */