68f7a1034a
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO and remove explicit bpf support from wireless drivers; drivers now use ieee80211_radiotap_attach to setup shared data structures that hold the radiotap header for each packet tx/rx o remove rx timestamp from the rx path; it was used only by the tdma support for debugging and was mostly useless due to it being 32-bits and mostly unavailable o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and per-com state when there are active taps o track the number of monitor mode vaps o use bpf tap and monitor mode vap state to decide when to collect radiotap state and dispatch frames; drivers no longer explicitly directly check bpf state or use bpf calls to tap frames o handle radiotap state updates on channel change in net80211; drivers should not do this (unless they bypass net80211 which is almost always a mistake) o update various drivers to be more consistent/correct in handling radiotap o update ral to include TSF in radiotap'd frames o add promisc mode callback to wi Reviewed by: cbzimmer, rpaulo, thompsa
372 lines
15 KiB
C
372 lines
15 KiB
C
/*-
|
|
* Copyright (c) 2001 Atsushi Onoe
|
|
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#ifndef _NET80211_IEEE80211_PROTO_H_
|
|
#define _NET80211_IEEE80211_PROTO_H_
|
|
|
|
/*
|
|
* 802.11 protocol implementation definitions.
|
|
*/
|
|
|
|
enum ieee80211_state {
|
|
IEEE80211_S_INIT = 0, /* default state */
|
|
IEEE80211_S_SCAN = 1, /* scanning */
|
|
IEEE80211_S_AUTH = 2, /* try to authenticate */
|
|
IEEE80211_S_ASSOC = 3, /* try to assoc */
|
|
IEEE80211_S_CAC = 4, /* doing channel availability check */
|
|
IEEE80211_S_RUN = 5, /* operational (e.g. associated) */
|
|
IEEE80211_S_CSA = 6, /* channel switch announce pending */
|
|
IEEE80211_S_SLEEP = 7, /* power save */
|
|
};
|
|
#define IEEE80211_S_MAX (IEEE80211_S_SLEEP+1)
|
|
|
|
#define IEEE80211_SEND_MGMT(_ni,_type,_arg) \
|
|
((*(_ni)->ni_ic->ic_send_mgmt)(_ni, _type, _arg))
|
|
|
|
extern const char *ieee80211_mgt_subtype_name[];
|
|
extern const char *ieee80211_phymode_name[IEEE80211_MODE_MAX];
|
|
extern const int ieee80211_opcap[IEEE80211_OPMODE_MAX];
|
|
|
|
void ieee80211_proto_attach(struct ieee80211com *);
|
|
void ieee80211_proto_detach(struct ieee80211com *);
|
|
void ieee80211_proto_vattach(struct ieee80211vap *);
|
|
void ieee80211_proto_vdetach(struct ieee80211vap *);
|
|
|
|
void ieee80211_syncifflag_locked(struct ieee80211com *, int flag);
|
|
void ieee80211_syncflag(struct ieee80211vap *, int flag);
|
|
void ieee80211_syncflag_ext(struct ieee80211vap *, int flag);
|
|
|
|
#define ieee80211_input(ni, m, rssi, nf) \
|
|
((ni)->ni_vap->iv_input(ni, m, rssi, nf))
|
|
int ieee80211_input_all(struct ieee80211com *, struct mbuf *, int, int);
|
|
struct ieee80211_bpf_params;
|
|
int ieee80211_mgmt_output(struct ieee80211_node *, struct mbuf *, int,
|
|
struct ieee80211_bpf_params *);
|
|
int ieee80211_raw_xmit(struct ieee80211_node *, struct mbuf *,
|
|
const struct ieee80211_bpf_params *);
|
|
int ieee80211_output(struct ifnet *, struct mbuf *,
|
|
struct sockaddr *, struct route *ro);
|
|
void ieee80211_start(struct ifnet *);
|
|
int ieee80211_send_nulldata(struct ieee80211_node *);
|
|
int ieee80211_classify(struct ieee80211_node *, struct mbuf *m);
|
|
struct mbuf *ieee80211_mbuf_adjust(struct ieee80211vap *, int,
|
|
struct ieee80211_key *, struct mbuf *);
|
|
struct mbuf *ieee80211_encap(struct ieee80211vap *, struct ieee80211_node *,
|
|
struct mbuf *);
|
|
int ieee80211_send_mgmt(struct ieee80211_node *, int, int);
|
|
struct ieee80211_appie;
|
|
int ieee80211_send_probereq(struct ieee80211_node *ni,
|
|
const uint8_t sa[IEEE80211_ADDR_LEN],
|
|
const uint8_t da[IEEE80211_ADDR_LEN],
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
const uint8_t *ssid, size_t ssidlen);
|
|
/*
|
|
* The formation of ProbeResponse frames requires guidance to
|
|
* deal with legacy clients. When the client is identified as
|
|
* "legacy 11b" ieee80211_send_proberesp is passed this token.
|
|
*/
|
|
#define IEEE80211_SEND_LEGACY_11B 0x1 /* legacy 11b client */
|
|
#define IEEE80211_SEND_LEGACY_11 0x2 /* other legacy client */
|
|
#define IEEE80211_SEND_LEGACY 0x3 /* any legacy client */
|
|
struct mbuf *ieee80211_alloc_proberesp(struct ieee80211_node *, int);
|
|
int ieee80211_send_proberesp(struct ieee80211vap *,
|
|
const uint8_t da[IEEE80211_ADDR_LEN], int);
|
|
struct mbuf *ieee80211_alloc_rts(struct ieee80211com *ic,
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
const uint8_t [IEEE80211_ADDR_LEN], uint16_t);
|
|
struct mbuf *ieee80211_alloc_cts(struct ieee80211com *,
|
|
const uint8_t [IEEE80211_ADDR_LEN], uint16_t);
|
|
|
|
void ieee80211_reset_erp(struct ieee80211com *);
|
|
void ieee80211_set_shortslottime(struct ieee80211com *, int onoff);
|
|
int ieee80211_iserp_rateset(const struct ieee80211_rateset *);
|
|
void ieee80211_setbasicrates(struct ieee80211_rateset *,
|
|
enum ieee80211_phymode);
|
|
void ieee80211_addbasicrates(struct ieee80211_rateset *,
|
|
enum ieee80211_phymode);
|
|
|
|
/*
|
|
* Return the size of the 802.11 header for a management or data frame.
|
|
*/
|
|
static __inline int
|
|
ieee80211_hdrsize(const void *data)
|
|
{
|
|
const struct ieee80211_frame *wh = data;
|
|
int size = sizeof(struct ieee80211_frame);
|
|
|
|
/* NB: we don't handle control frames */
|
|
KASSERT((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL,
|
|
("%s: control frame", __func__));
|
|
if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS)
|
|
size += IEEE80211_ADDR_LEN;
|
|
if (IEEE80211_QOS_HAS_SEQ(wh))
|
|
size += sizeof(uint16_t);
|
|
return size;
|
|
}
|
|
|
|
/*
|
|
* Like ieee80211_hdrsize, but handles any type of frame.
|
|
*/
|
|
static __inline int
|
|
ieee80211_anyhdrsize(const void *data)
|
|
{
|
|
const struct ieee80211_frame *wh = data;
|
|
|
|
if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) {
|
|
switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
|
|
case IEEE80211_FC0_SUBTYPE_CTS:
|
|
case IEEE80211_FC0_SUBTYPE_ACK:
|
|
return sizeof(struct ieee80211_frame_ack);
|
|
case IEEE80211_FC0_SUBTYPE_BAR:
|
|
return sizeof(struct ieee80211_frame_bar);
|
|
}
|
|
return sizeof(struct ieee80211_frame_min);
|
|
} else
|
|
return ieee80211_hdrsize(data);
|
|
}
|
|
|
|
/*
|
|
* Template for an in-kernel authenticator. Authenticators
|
|
* register with the protocol code and are typically loaded
|
|
* as separate modules as needed. One special authenticator
|
|
* is xauth; it intercepts requests so that protocols like
|
|
* WPA can be handled in user space.
|
|
*/
|
|
struct ieee80211_authenticator {
|
|
const char *ia_name; /* printable name */
|
|
int (*ia_attach)(struct ieee80211vap *);
|
|
void (*ia_detach)(struct ieee80211vap *);
|
|
void (*ia_node_join)(struct ieee80211_node *);
|
|
void (*ia_node_leave)(struct ieee80211_node *);
|
|
};
|
|
void ieee80211_authenticator_register(int type,
|
|
const struct ieee80211_authenticator *);
|
|
void ieee80211_authenticator_unregister(int type);
|
|
const struct ieee80211_authenticator *ieee80211_authenticator_get(int auth);
|
|
|
|
struct ieee80211req;
|
|
/*
|
|
* Template for an MAC ACL policy module. Such modules
|
|
* register with the protocol code and are passed the sender's
|
|
* address of each received auth frame for validation.
|
|
*/
|
|
struct ieee80211_aclator {
|
|
const char *iac_name; /* printable name */
|
|
int (*iac_attach)(struct ieee80211vap *);
|
|
void (*iac_detach)(struct ieee80211vap *);
|
|
int (*iac_check)(struct ieee80211vap *,
|
|
const uint8_t mac[IEEE80211_ADDR_LEN]);
|
|
int (*iac_add)(struct ieee80211vap *,
|
|
const uint8_t mac[IEEE80211_ADDR_LEN]);
|
|
int (*iac_remove)(struct ieee80211vap *,
|
|
const uint8_t mac[IEEE80211_ADDR_LEN]);
|
|
int (*iac_flush)(struct ieee80211vap *);
|
|
int (*iac_setpolicy)(struct ieee80211vap *, int);
|
|
int (*iac_getpolicy)(struct ieee80211vap *);
|
|
int (*iac_setioctl)(struct ieee80211vap *, struct ieee80211req *);
|
|
int (*iac_getioctl)(struct ieee80211vap *, struct ieee80211req *);
|
|
};
|
|
void ieee80211_aclator_register(const struct ieee80211_aclator *);
|
|
void ieee80211_aclator_unregister(const struct ieee80211_aclator *);
|
|
const struct ieee80211_aclator *ieee80211_aclator_get(const char *name);
|
|
|
|
/* flags for ieee80211_fix_rate() */
|
|
#define IEEE80211_F_DOSORT 0x00000001 /* sort rate list */
|
|
#define IEEE80211_F_DOFRATE 0x00000002 /* use fixed legacy rate */
|
|
#define IEEE80211_F_DONEGO 0x00000004 /* calc negotiated rate */
|
|
#define IEEE80211_F_DODEL 0x00000008 /* delete ignore rate */
|
|
#define IEEE80211_F_DOBRS 0x00000010 /* check basic rate set */
|
|
#define IEEE80211_F_JOIN 0x00000020 /* sta joining our bss */
|
|
#define IEEE80211_F_DOFMCS 0x00000040 /* use fixed HT rate */
|
|
int ieee80211_fix_rate(struct ieee80211_node *,
|
|
struct ieee80211_rateset *, int);
|
|
|
|
/*
|
|
* WME/WMM support.
|
|
*/
|
|
struct wmeParams {
|
|
uint8_t wmep_acm;
|
|
uint8_t wmep_aifsn;
|
|
uint8_t wmep_logcwmin; /* log2(cwmin) */
|
|
uint8_t wmep_logcwmax; /* log2(cwmax) */
|
|
uint8_t wmep_txopLimit;
|
|
uint8_t wmep_noackPolicy; /* 0 (ack), 1 (no ack) */
|
|
};
|
|
#define IEEE80211_TXOP_TO_US(_txop) ((_txop)<<5)
|
|
#define IEEE80211_US_TO_TXOP(_us) ((_us)>>5)
|
|
|
|
struct chanAccParams {
|
|
uint8_t cap_info; /* version of the current set */
|
|
struct wmeParams cap_wmeParams[WME_NUM_AC];
|
|
};
|
|
|
|
struct ieee80211_wme_state {
|
|
u_int wme_flags;
|
|
#define WME_F_AGGRMODE 0x00000001 /* STATUS: WME agressive mode */
|
|
u_int wme_hipri_traffic; /* VI/VO frames in beacon interval */
|
|
u_int wme_hipri_switch_thresh;/* agressive mode switch thresh */
|
|
u_int wme_hipri_switch_hysteresis;/* agressive mode switch hysteresis */
|
|
|
|
struct wmeParams wme_params[4]; /* from assoc resp for each AC*/
|
|
struct chanAccParams wme_wmeChanParams; /* WME params applied to self */
|
|
struct chanAccParams wme_wmeBssChanParams;/* WME params bcast to stations */
|
|
struct chanAccParams wme_chanParams; /* params applied to self */
|
|
struct chanAccParams wme_bssChanParams; /* params bcast to stations */
|
|
|
|
int (*wme_update)(struct ieee80211com *);
|
|
};
|
|
|
|
void ieee80211_wme_initparams(struct ieee80211vap *);
|
|
void ieee80211_wme_updateparams(struct ieee80211vap *);
|
|
void ieee80211_wme_updateparams_locked(struct ieee80211vap *);
|
|
|
|
/*
|
|
* Return the WME TID from a QoS frame. If no TID
|
|
* is present return the index for the "non-QoS" entry.
|
|
*/
|
|
static __inline uint8_t
|
|
ieee80211_gettid(const struct ieee80211_frame *wh)
|
|
{
|
|
uint8_t tid;
|
|
|
|
if (IEEE80211_QOS_HAS_SEQ(wh)) {
|
|
tid = ((const struct ieee80211_qosframe *)wh)->
|
|
i_qos[0] & IEEE80211_QOS_TID;
|
|
tid++;
|
|
} else
|
|
tid = IEEE80211_NONQOS_TID;
|
|
return tid;
|
|
}
|
|
|
|
void ieee80211_waitfor_parent(struct ieee80211com *);
|
|
void ieee80211_start_locked(struct ieee80211vap *);
|
|
void ieee80211_init(void *);
|
|
void ieee80211_start_all(struct ieee80211com *);
|
|
void ieee80211_stop_locked(struct ieee80211vap *);
|
|
void ieee80211_stop(struct ieee80211vap *);
|
|
void ieee80211_stop_all(struct ieee80211com *);
|
|
void ieee80211_suspend_all(struct ieee80211com *);
|
|
void ieee80211_resume_all(struct ieee80211com *);
|
|
void ieee80211_dturbo_switch(struct ieee80211vap *, int newflags);
|
|
void ieee80211_swbmiss(void *arg);
|
|
void ieee80211_beacon_miss(struct ieee80211com *);
|
|
int ieee80211_new_state(struct ieee80211vap *, enum ieee80211_state, int);
|
|
void ieee80211_print_essid(const uint8_t *, int);
|
|
void ieee80211_dump_pkt(struct ieee80211com *,
|
|
const uint8_t *, int, int, int);
|
|
|
|
extern const char *ieee80211_opmode_name[];
|
|
extern const char *ieee80211_state_name[IEEE80211_S_MAX];
|
|
extern const char *ieee80211_wme_acnames[];
|
|
|
|
/*
|
|
* Beacon frames constructed by ieee80211_beacon_alloc
|
|
* have the following structure filled in so drivers
|
|
* can update the frame later w/ minimal overhead.
|
|
*/
|
|
struct ieee80211_beacon_offsets {
|
|
uint8_t bo_flags[4]; /* update/state flags */
|
|
uint16_t *bo_caps; /* capabilities */
|
|
uint8_t *bo_cfp; /* start of CFParms element */
|
|
uint8_t *bo_tim; /* start of atim/dtim */
|
|
uint8_t *bo_wme; /* start of WME parameters */
|
|
uint8_t *bo_tdma; /* start of TDMA parameters */
|
|
uint8_t *bo_tim_trailer;/* start of fixed-size trailer */
|
|
uint16_t bo_tim_len; /* atim/dtim length in bytes */
|
|
uint16_t bo_tim_trailer_len;/* tim trailer length in bytes */
|
|
uint8_t *bo_erp; /* start of ERP element */
|
|
uint8_t *bo_htinfo; /* start of HT info element */
|
|
uint8_t *bo_ath; /* start of ATH parameters */
|
|
uint8_t *bo_appie; /* start of AppIE element */
|
|
uint16_t bo_appie_len; /* AppIE length in bytes */
|
|
uint16_t bo_csa_trailer_len;;
|
|
uint8_t *bo_csa; /* start of CSA element */
|
|
};
|
|
struct mbuf *ieee80211_beacon_alloc(struct ieee80211_node *,
|
|
struct ieee80211_beacon_offsets *);
|
|
|
|
/*
|
|
* Beacon frame updates are signaled through calls to iv_update_beacon
|
|
* with one of the IEEE80211_BEACON_* tokens defined below. For devices
|
|
* that construct beacon frames on the host this can trigger a rebuild
|
|
* or defer the processing. For devices that offload beacon frame
|
|
* handling this callback can be used to signal a rebuild. The bo_flags
|
|
* array in the ieee80211_beacon_offsets structure is intended to record
|
|
* deferred processing requirements; ieee80211_beacon_update uses the
|
|
* state to optimize work. Since this structure is owned by the driver
|
|
* and not visible to the 802.11 layer drivers must supply an iv_update_beacon
|
|
* callback that marks the flag bits and schedules (as necessary) an update.
|
|
*/
|
|
enum {
|
|
IEEE80211_BEACON_CAPS = 0, /* capabilities */
|
|
IEEE80211_BEACON_TIM = 1, /* DTIM/ATIM */
|
|
IEEE80211_BEACON_WME = 2,
|
|
IEEE80211_BEACON_ERP = 3, /* Extended Rate Phy */
|
|
IEEE80211_BEACON_HTINFO = 4, /* HT Information */
|
|
IEEE80211_BEACON_APPIE = 5, /* Application IE's */
|
|
IEEE80211_BEACON_CFP = 6, /* CFParms */
|
|
IEEE80211_BEACON_CSA = 7, /* Channel Switch Announcement */
|
|
IEEE80211_BEACON_TDMA = 9, /* TDMA Info */
|
|
IEEE80211_BEACON_ATH = 10, /* ATH parameters */
|
|
};
|
|
int ieee80211_beacon_update(struct ieee80211_node *,
|
|
struct ieee80211_beacon_offsets *, struct mbuf *, int mcast);
|
|
|
|
void ieee80211_csa_startswitch(struct ieee80211com *,
|
|
struct ieee80211_channel *, int mode, int count);
|
|
void ieee80211_csa_completeswitch(struct ieee80211com *);
|
|
void ieee80211_cac_completeswitch(struct ieee80211vap *);
|
|
|
|
/*
|
|
* Notification methods called from the 802.11 state machine.
|
|
* Note that while these are defined here, their implementation
|
|
* is OS-specific.
|
|
*/
|
|
void ieee80211_notify_node_join(struct ieee80211_node *, int newassoc);
|
|
void ieee80211_notify_node_leave(struct ieee80211_node *);
|
|
void ieee80211_notify_scan_done(struct ieee80211vap *);
|
|
void ieee80211_notify_wds_discover(struct ieee80211_node *);
|
|
void ieee80211_notify_csa(struct ieee80211com *,
|
|
const struct ieee80211_channel *, int mode, int count);
|
|
void ieee80211_notify_radar(struct ieee80211com *,
|
|
const struct ieee80211_channel *);
|
|
enum ieee80211_notify_cac_event {
|
|
IEEE80211_NOTIFY_CAC_START = 0, /* CAC timer started */
|
|
IEEE80211_NOTIFY_CAC_STOP = 1, /* CAC intentionally stopped */
|
|
IEEE80211_NOTIFY_CAC_RADAR = 2, /* CAC stopped due to radar detectio */
|
|
IEEE80211_NOTIFY_CAC_EXPIRE = 3, /* CAC expired w/o radar */
|
|
};
|
|
void ieee80211_notify_cac(struct ieee80211com *,
|
|
const struct ieee80211_channel *,
|
|
enum ieee80211_notify_cac_event);
|
|
void ieee80211_notify_node_deauth(struct ieee80211_node *);
|
|
void ieee80211_notify_node_auth(struct ieee80211_node *);
|
|
void ieee80211_notify_country(struct ieee80211vap *, const uint8_t [],
|
|
const uint8_t cc[2]);
|
|
void ieee80211_notify_radio(struct ieee80211com *, int);
|
|
#endif /* _NET80211_IEEE80211_PROTO_H_ */
|