6428a9e826
- Add support for Leadtek WinFast Tv2000 XP bktr card - Add support for PHILIPS FI1216 PR: 94369 Submitted by: Angelescu Ovidiu <mrhsaacdoh@yahoo.com> Submitted on: 2006-03-11 19:30 UTC
1409 lines
44 KiB
C
1409 lines
44 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-4-Clause
|
|
*
|
|
* 1. Redistributions of source code must retain the
|
|
* Copyright (c) 1997 Amancio Hasty, 1999 Roger Hardiman
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Amancio Hasty and
|
|
* Roger Hardiman
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* This is part of the Driver for Video Capture Cards (Frame grabbers)
|
|
* and TV Tuner cards using the Brooktree Bt848, Bt848A, Bt849A, Bt878, Bt879
|
|
* chipset.
|
|
* Copyright Roger Hardiman and Amancio Hasty.
|
|
*
|
|
* bktr_card : This deals with identifying TV cards.
|
|
* trying to find the card make and model of card.
|
|
* trying to find the type of tuner fitted.
|
|
* reading the configuration EEPROM.
|
|
* locating i2c devices.
|
|
*/
|
|
|
|
#include "opt_bktr.h" /* Include any kernel config options */
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
|
|
#if (__FreeBSD_version < 500000)
|
|
#include <machine/clock.h> /* for DELAY */
|
|
#include <pci/pcivar.h>
|
|
#else
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/selinfo.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#endif
|
|
|
|
#include <machine/bus.h>
|
|
#include <sys/bus.h>
|
|
#endif
|
|
|
|
#ifdef __NetBSD__
|
|
#include <dev/ic/bt8xx.h> /* NetBSD location for .h files */
|
|
#include <dev/pci/bktr/bktr_reg.h>
|
|
#include <dev/pci/bktr/bktr_core.h>
|
|
#include <dev/pci/bktr/bktr_tuner.h>
|
|
#include <dev/pci/bktr/bktr_card.h>
|
|
#include <dev/pci/bktr/bktr_audio.h>
|
|
#else
|
|
#include <dev/bktr/ioctl_meteor.h>
|
|
#include <dev/bktr/ioctl_bt848.h> /* extensions to ioctl_meteor.h */
|
|
#include <dev/bktr/bktr_reg.h>
|
|
#include <dev/bktr/bktr_core.h>
|
|
#include <dev/bktr/bktr_tuner.h>
|
|
#include <dev/bktr/bktr_card.h>
|
|
#include <dev/bktr/bktr_audio.h>
|
|
#endif
|
|
|
|
/* Include the PCI Vendor definitions */
|
|
#ifdef __NetBSD__
|
|
#include <dev/pci/pcidevs.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#endif
|
|
|
|
/* Various defines */
|
|
#define HAUP_REMOTE_INT_WADDR 0x30
|
|
#define HAUP_REMOTE_INT_RADDR 0x31
|
|
|
|
#define HAUP_REMOTE_EXT_WADDR 0x34
|
|
#define HAUP_REMOTE_EXT_RADDR 0x35
|
|
|
|
/* address of BTSC/SAP decoder chip */
|
|
#define TDA9850_WADDR 0xb6
|
|
#define TDA9850_RADDR 0xb7
|
|
|
|
/* address of MSP3400C chip */
|
|
#define MSP3400C_WADDR 0x80
|
|
#define MSP3400C_RADDR 0x81
|
|
|
|
/* address of DPL3518A chip */
|
|
#define DPL3518A_WADDR 0x84
|
|
#define DPL3518A_RADDR 0x85
|
|
|
|
/* EEProm (128 * 8) on an STB card */
|
|
#define X24C01_WADDR 0xae
|
|
#define X24C01_RADDR 0xaf
|
|
|
|
|
|
/* EEProm (256 * 8) on a Hauppauge card */
|
|
/* and on most BT878s cards to store the sub-system vendor id */
|
|
#define PFC8582_WADDR 0xa0
|
|
#define PFC8582_RADDR 0xa1
|
|
|
|
#if defined(BKTR_SYSTEM_DEFAULT) && BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL
|
|
#define DEFAULT_TUNER PHILIPS_PALI
|
|
#else
|
|
#define DEFAULT_TUNER PHILIPS_NTSC
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
|
* the data for each type of card
|
|
*
|
|
* Note:
|
|
* these entried MUST be kept in the order defined by the CARD_XXX defines!
|
|
*/
|
|
static const struct CARDTYPE cards[] = {
|
|
|
|
{ CARD_UNKNOWN, /* the card id */
|
|
"Unknown", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx unknown */
|
|
0,
|
|
0,
|
|
0, /* EEProm unknown */
|
|
0, /* EEProm unknown */
|
|
{ 0, 0, 0, 0, 0 },
|
|
0 }, /* GPIO mask */
|
|
|
|
{ CARD_MIRO, /* the card id */
|
|
"Pinnacle/Miro TV", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx unknown */
|
|
0,
|
|
0,
|
|
0, /* EEProm unknown */
|
|
0, /* size unknown */
|
|
{ 0x02, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_HAUPPAUGE, /* the card id */
|
|
"Hauppauge WinCast/TV", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
PFC8582_WADDR, /* EEProm type */
|
|
(u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
|
|
{ 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_STB, /* the card id */
|
|
"STB TV/PCI", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
X24C01_WADDR, /* EEProm type */
|
|
(u_char)(128 / EEPROMBLOCKSIZE), /* 128 bytes */
|
|
{ 0x00, 0x01, 0x02, 0x02, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_INTEL, /* the card id */
|
|
"Intel Smart Video III/VideoLogic Captivator PCI", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
{ 0, 0, 0, 0, 0 }, /* audio MUX values */
|
|
0x00 }, /* GPIO mask */
|
|
|
|
{ CARD_IMS_TURBO, /* the card id */
|
|
"IMS TV Turbo", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
PFC8582_WADDR, /* EEProm type */
|
|
(u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
|
|
{ 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_AVER_MEDIA, /* the card id */
|
|
"AVer Media TV/FM", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x0c, 0x08, 0x04, 0x00, 1 }, /* audio MUX values */
|
|
0x1f }, /* GPIO mask */
|
|
|
|
{ CARD_OSPREY, /* the card id */
|
|
"MMAC Osprey", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
PFC8582_WADDR, /* EEProm type */
|
|
(u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
|
|
{ 0x00, 0x00, 0x00, 0x00, 0 }, /* audio MUX values */
|
|
0 }, /* GPIO mask */
|
|
|
|
{ CARD_NEC_PK, /* the card id */
|
|
"NEC PK-UG-X017", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_IO_BCTV2, /* the card id */
|
|
"I/O DATA GV-BCTV2/PCI", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x00, 0x00, 0x00, 0x00, 1 }, /* Has special MUX handler */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_FLYVIDEO, /* the card id */
|
|
"FlyVideo", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0, /* msp34xx is optional */
|
|
0, /* dpl3518a is optional */
|
|
0xac, /* EEProm type */
|
|
(u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
|
|
{ 0x000, 0x800, 0x400, 0x8dff00, 1 },/* audio MUX values */
|
|
0x8dff00 }, /* GPIO mask */
|
|
|
|
{ CARD_ZOLTRIX, /* the card id */
|
|
"Zoltrix", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0, /* msp34xx is optional */
|
|
0, /* dpl3518a is optional */
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x04, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_KISS, /* the card id */
|
|
"KISS TV/FM PCI", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0, /* msp34xx is optional */
|
|
0, /* dpl3518a is optional */
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x0c, 0x00, 0x0b, 0x0b, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_VIDEO_HIGHWAY_XTREME, /* the card id */
|
|
"Video Highway Xtreme", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */
|
|
0x0f }, /* GPIO mask */
|
|
|
|
{ CARD_ASKEY_DYNALINK_MAGIC_TVIEW, /* the card id */
|
|
"Askey/Dynalink Magic TView", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x400, 0xE00, 0x400, 0xC00, 1 }, /* audio MUX values */
|
|
0xE00 }, /* GPIO mask */
|
|
|
|
{ CARD_LEADTEK, /* the card id */
|
|
"Leadtek Winfast TV 2000", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
/* Tuner, Extern, Intern, Mute, Enabled */
|
|
{ 0x621000, 0x621000, 0x621000, 0xE21000, 1 }, /* audio MUX values */
|
|
0xfff000 }, /* GPIO mask */
|
|
|
|
{ CARD_TERRATVPLUS, /* the card id */
|
|
"TerraTVplus", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x20000, 0x00000, 0x30000, 0x40000, 1 }, /* audio MUX values*/
|
|
0x70000 }, /* GPIO mask */
|
|
|
|
{ CARD_IO_BCTV3, /* the card id */
|
|
"I/O DATA GV-BCTV3/PCI", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
/* Tuner, Extern, Intern, Mute, Enabled */
|
|
{ 0x10000, 0, 0x10000, 0, 1 }, /* audio MUX values */
|
|
0x10f00 }, /* GPIO mask */
|
|
|
|
{ CARD_AOPEN_VA1000, /* the card id */
|
|
"AOpen VA1000", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm unknown */
|
|
0, /* size unknown */
|
|
{ 0x02, 0x00, 0x00, 0x00, 1 }, /* audio MUX values */
|
|
0x18e0 }, /* GPIO mask */
|
|
|
|
{ CARD_PINNACLE_PCTV_RAVE, /* the card id */
|
|
"Pinnacle PCTV Rave", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx unknown */
|
|
0,
|
|
0,
|
|
0, /* EEProm unknown */
|
|
0, /* size unknown */
|
|
{ 0x02, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */
|
|
0x03000F }, /* GPIO mask */
|
|
|
|
{ CARD_PIXELVIEW_PLAYTV_PAK, /* the card id */
|
|
"PixelView PlayTV Pak", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
PFC8582_WADDR, /* EEProm type */
|
|
(u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
|
|
{ 0x20000, 0x80000, 0, 0xa8000, 1 }, /* audio MUX values */
|
|
0xAA0000 }, /* GPIO mask */
|
|
|
|
{ CARD_TERRATVALUE, /* the card id */
|
|
"TerraTec TValue", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
/* Tuner, Extern, Intern, Mute, Enabled */
|
|
{ 0x500, 0x900, 0x300, 0x900, 1 }, /* audio MUX values */
|
|
0xffff00 }, /* GPIO mask */
|
|
|
|
{ CARD_PIXELVIEW_PLAYTV_PRO_REV_4C, /* the card id */
|
|
"PixelView PlayTV Pro REV-4C ", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm type */
|
|
0, /* EEProm size */
|
|
{ 0x01, 0x04, 0x01, 0x03, 1 }, /* audio MUX values */
|
|
0x00ffffff },
|
|
{ CARD_LEADTEK_WINFAST_2000_XP, /* the card id */
|
|
"Leadtek Winfast 2000 XP", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* the tuner i2c address */
|
|
0, /* dbx is optional */
|
|
0,
|
|
0,
|
|
0, /* EEProm unknown */
|
|
0, /* size unknown */
|
|
{ 0x122000, 0x1000, 0x620000, 0x0000, 1 }, /* audio MUX values */
|
|
0xb33000 }, /* GPIO mask */
|
|
|
|
};
|
|
|
|
struct bt848_card_sig bt848_card_signature[1]= {
|
|
/* IMS TURBO TV : card 5 */
|
|
{ 5,9, {00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00}}
|
|
|
|
|
|
};
|
|
|
|
|
|
/*
|
|
* Write to the configuration EEPROM on the card.
|
|
* This is dangerous and will mess up your card. Therefore it is not
|
|
* implemented.
|
|
*/
|
|
int
|
|
writeEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data )
|
|
{
|
|
return( -1 );
|
|
}
|
|
|
|
/*
|
|
* Read the contents of the configuration EEPROM on the card.
|
|
* (This is not fitted to all makes of card. All Hauppauge cards have them
|
|
* and so do newer Bt878 based cards.
|
|
*/
|
|
int
|
|
readEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data )
|
|
{
|
|
int x;
|
|
int addr;
|
|
int max;
|
|
int byte;
|
|
|
|
/* get the address of the EEProm */
|
|
addr = (int)(bktr->card.eepromAddr & 0xff);
|
|
if ( addr == 0 )
|
|
return( -1 );
|
|
|
|
max = (int)(bktr->card.eepromSize * EEPROMBLOCKSIZE);
|
|
if ( (offset + count) > max )
|
|
return( -1 );
|
|
|
|
/* set the start address */
|
|
if ( i2cWrite( bktr, addr, offset, -1 ) == -1 )
|
|
return( -1 );
|
|
|
|
/* the read cycle */
|
|
for ( x = 0; x < count; ++x ) {
|
|
if ( (byte = i2cRead( bktr, (addr | 1) )) == -1 )
|
|
return( -1 );
|
|
data[ x ] = byte;
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
#define ABSENT (-1)
|
|
|
|
/*
|
|
* get a signature of the card
|
|
* read all 128 possible i2c read addresses from 0x01 thru 0xff
|
|
* build a bit array with a 1 bit for each i2c device that responds
|
|
*
|
|
* XXX FIXME: use offset & count args
|
|
*/
|
|
int
|
|
signCard( bktr_ptr_t bktr, int offset, int count, u_char* sig )
|
|
{
|
|
int x;
|
|
|
|
for ( x = 0; x < 16; ++x )
|
|
sig[ x ] = 0;
|
|
|
|
for ( x = 0; x < count; ++x ) {
|
|
if ( i2cRead( bktr, (2 * x) + 1 ) != ABSENT ) {
|
|
sig[ x / 8 ] |= (1 << (x % 8) );
|
|
}
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
* check_for_i2c_devices.
|
|
* Some BT848 cards have no tuner and no additional i2c devices
|
|
* eg stereo decoder. These are used for video conferencing or capture from
|
|
* a video camera. (eg VideoLogic Captivator PCI, Intel SmartCapture card).
|
|
*
|
|
* Determine if there are any i2c devices present. There are none present if
|
|
* a) reading from all 128 devices returns ABSENT (-1) for each one
|
|
* (eg VideoLogic Captivator PCI with BT848)
|
|
* b) reading from all 128 devices returns 0 for each one
|
|
* (eg VideoLogic Captivator PCI rev. 2F with BT848A)
|
|
*/
|
|
static int check_for_i2c_devices( bktr_ptr_t bktr ){
|
|
int x, temp_read;
|
|
int i2c_all_0 = 1;
|
|
int i2c_all_absent = 1;
|
|
for ( x = 0; x < 128; ++x ) {
|
|
temp_read = i2cRead( bktr, (2 * x) + 1 );
|
|
if (temp_read != 0) i2c_all_0 = 0;
|
|
if (temp_read != ABSENT) i2c_all_absent = 0;
|
|
}
|
|
|
|
if ((i2c_all_0) || (i2c_all_absent)) return 0;
|
|
else return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* Temic/Philips datasheets say tuners can be at i2c addresses 0xc0, 0xc2,
|
|
* 0xc4 or 0xc6, settable by links on the tuner.
|
|
* Determine the actual address used on the TV card by probing read addresses.
|
|
*/
|
|
static int locate_tuner_address( bktr_ptr_t bktr) {
|
|
if (i2cRead( bktr, 0xc1) != ABSENT) return 0xc0;
|
|
if (i2cRead( bktr, 0xc3) != ABSENT) return 0xc2;
|
|
if (i2cRead( bktr, 0xc5) != ABSENT) return 0xc4;
|
|
if (i2cRead( bktr, 0xc7) != ABSENT) return 0xc6;
|
|
return -1; /* no tuner found */
|
|
}
|
|
|
|
|
|
/*
|
|
* Search for a configuration EEPROM on the i2c bus by looking at i2c addresses
|
|
* where EEPROMs are usually found.
|
|
* On some cards, the EEPROM appears in several locations, but all in the
|
|
* range 0xa0 to 0xae.
|
|
*/
|
|
static int locate_eeprom_address( bktr_ptr_t bktr) {
|
|
if (i2cRead( bktr, 0xa0) != ABSENT) return 0xa0;
|
|
if (i2cRead( bktr, 0xac) != ABSENT) return 0xac;
|
|
if (i2cRead( bktr, 0xae) != ABSENT) return 0xae;
|
|
return -1; /* no eeprom found */
|
|
}
|
|
|
|
|
|
/*
|
|
* determine the card brand/model
|
|
* BKTR_OVERRIDE_CARD, BKTR_OVERRIDE_TUNER, BKTR_OVERRIDE_DBX and
|
|
* BKTR_OVERRIDE_MSP can be used to select a specific device,
|
|
* regardless of the autodetection and i2c device checks.
|
|
*
|
|
* The scheme used for probing cards faces these problems:
|
|
* It is impossible to work out which type of tuner is actually fitted,
|
|
* (the driver cannot tell if the Tuner is PAL or NTSC, Temic or Philips)
|
|
* It is impossible to determine what audio-mux hardware is connected.
|
|
* It is impossible to determine if there is extra hardware connected to the
|
|
* GPIO pins (eg radio chips or MSP34xx reset logic)
|
|
*
|
|
* However some makes of card (eg Hauppauge) come with a configuration eeprom
|
|
* which tells us the make of the card. Most eeproms also tell us the
|
|
* tuner type and other features of the cards.
|
|
*
|
|
* The current probe code works as follows
|
|
* A) If the card uses a Bt878/879:
|
|
* 1) Read the sub-system vendor id from the configuration EEPROM.
|
|
* Select the required tuner, audio mux arrangement and any other
|
|
* onboard features. If this fails, move to step B.
|
|
* B) If it card uses a Bt848, 848A, 849A or an unknown Bt878/879:
|
|
* 1) Look for I2C devices. If there are none fitted, it is an Intel or
|
|
* VideoLogic cards.
|
|
* 2) Look for a configuration EEPROM.
|
|
* 2a) If there is one at I2C address 0xa0 it may be
|
|
* a Hauppauge or an Osprey. Check the EEPROM contents to determine which
|
|
* one it is. For Hauppauge, select the tuner type and audio hardware.
|
|
* 2b) If there is an EEPROM at I2C address 0xa8 it will be an STB card.
|
|
* We still have to guess on the tuner type.
|
|
*
|
|
* C) If we do not know the card type from (A) or (B), guess at the tuner
|
|
* type based on the I2C address of the tuner.
|
|
*
|
|
* D) After determining the Tuner Type, we probe the i2c bus for other
|
|
* devices at known locations, eg IR-Remote Control, MSP34xx and TDA
|
|
* stereo chips.
|
|
*/
|
|
|
|
|
|
/*
|
|
* These are the sub-system vendor ID codes stored in the
|
|
* configuration EEPROM used on Bt878/879 cards. They should match the
|
|
* number assigned to the company by the PCI Special Interest Group
|
|
*/
|
|
#ifndef __NetBSD__
|
|
#define PCI_VENDOR_HAUPPAUGE 0x0070
|
|
#define PCI_VENDOR_AVERMEDIA 0x1461
|
|
#define PCI_VENDOR_STB 0x10B4
|
|
#define PCI_VENDOR_ASKEY 0x144F
|
|
#define PCI_VENDOR_TERRATEC 0x153B
|
|
#endif
|
|
/* Following not confirmed with http://members.hyperlink.net.au/~chart,
|
|
so not added to NetBSD's pcidevs */
|
|
#define PCI_VENDOR_LEADTEK_ALT 0x6606
|
|
#define PCI_VENDOR_LEADTEK_ALT_2 0x6607
|
|
#define PCI_VENDOR_LEADTEK_ALT_3 0x107d
|
|
#define PCI_VENDOR_FLYVIDEO 0x1851
|
|
#define PCI_VENDOR_FLYVIDEO_2 0x1852
|
|
#define PCI_VENDOR_IODATA 0x10fc
|
|
#define PCI_VENDOR_PINNACLE_ALT 0xBD11 /* They got their own ID backwards? */
|
|
#define PCI_VENDOR_PINNACLE_NEW 0x11BD
|
|
|
|
#define MODEL_IODATA_GV_BCTV3_PCI 0x4020
|
|
#define MODEL_TERRATVALUE_1117 0x1117
|
|
#define MODEL_TERRATVALUE_1118 0x1118
|
|
#define MODEL_TERRATVALUE_1119 0x1119
|
|
#define MODEL_TERRATVALUE_111A 0x111a
|
|
#define MODEL_TERRATVALUE_1134 0x1134
|
|
|
|
void
|
|
probeCard( bktr_ptr_t bktr, int verbose, int unit )
|
|
{
|
|
int card, i,j, card_found;
|
|
int status;
|
|
u_char probe_signature[128], *probe_temp;
|
|
int any_i2c_devices;
|
|
u_char eeprom[256];
|
|
int tuner_i2c_address = -1;
|
|
int eeprom_i2c_address = -1;
|
|
|
|
/* Select all GPIO bits as inputs */
|
|
OUTL(bktr, BKTR_GPIO_OUT_EN, 0);
|
|
if (bootverbose)
|
|
printf("%s: GPIO is 0x%08x\n", bktr_name(bktr),
|
|
INL(bktr, BKTR_GPIO_DATA));
|
|
|
|
#ifdef HAUPPAUGE_MSP_RESET
|
|
/* Reset the MSP34xx audio chip. This resolves bootup card
|
|
* detection problems with old Bt848 based Hauppauge cards with
|
|
* MSP34xx stereo audio chips. This must be user enabled because
|
|
* at this point the probe function does not know the card type. */
|
|
OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5));
|
|
OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
|
|
DELAY(2500); /* wait 2.5ms */
|
|
OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5)); /* write '0' */
|
|
DELAY(2500); /* wait 2.5ms */
|
|
OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
|
|
DELAY(2500); /* wait 2.5ms */
|
|
#endif
|
|
|
|
/* Check for the presence of i2c devices */
|
|
any_i2c_devices = check_for_i2c_devices( bktr );
|
|
|
|
|
|
/* Check for a user specified override on the card selection */
|
|
#if defined( BKTR_OVERRIDE_CARD )
|
|
bktr->card = cards[ (card = BKTR_OVERRIDE_CARD) ];
|
|
goto checkEEPROM;
|
|
#endif
|
|
if (bktr->bt848_card != -1 ) {
|
|
bktr->card = cards[ (card = bktr->bt848_card) ];
|
|
goto checkEEPROM;
|
|
}
|
|
|
|
|
|
/* No override, so try and determine the make of the card */
|
|
|
|
/* On BT878/879 cards, read the sub-system vendor id */
|
|
/* This identifies the manufacturer of the card and the model */
|
|
/* In theory this can be read from PCI registers but this does not */
|
|
/* appear to work on the FlyVideo 98. Hauppauge also warned that */
|
|
/* the PCI registers are sometimes not loaded correctly. */
|
|
/* Therefore, I will read the sub-system vendor ID from the EEPROM */
|
|
/* (just like the Bt878 does during power up initialisation) */
|
|
|
|
if ((bktr->id==BROOKTREE_878) || (bktr->id==BROOKTREE_879)) {
|
|
/* Try and locate the EEPROM */
|
|
eeprom_i2c_address = locate_eeprom_address( bktr );
|
|
if (eeprom_i2c_address != -1) {
|
|
|
|
unsigned int subsystem_vendor_id; /* vendors PCI-SIG ID */
|
|
unsigned int subsystem_id; /* board model number */
|
|
unsigned int byte_252, byte_253, byte_254, byte_255;
|
|
|
|
bktr->card = cards[ (card = CARD_UNKNOWN) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
|
|
readEEProm(bktr, 0, 256, (u_char *) &eeprom );
|
|
byte_252 = (unsigned int)eeprom[252];
|
|
byte_253 = (unsigned int)eeprom[253];
|
|
byte_254 = (unsigned int)eeprom[254];
|
|
byte_255 = (unsigned int)eeprom[255];
|
|
|
|
subsystem_id = (byte_252 << 8) | byte_253;
|
|
subsystem_vendor_id = (byte_254 << 8) | byte_255;
|
|
|
|
if ( bootverbose )
|
|
printf("%s: subsystem 0x%04x 0x%04x\n", bktr_name(bktr),
|
|
subsystem_vendor_id, subsystem_id);
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_AVERMEDIA) {
|
|
bktr->card = cards[ (card = CARD_AVER_MEDIA) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_HAUPPAUGE) {
|
|
bktr->card = cards[ (card = CARD_HAUPPAUGE) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if ((subsystem_vendor_id == PCI_VENDOR_FLYVIDEO)
|
|
|| (subsystem_vendor_id == PCI_VENDOR_FLYVIDEO_2) ) {
|
|
bktr->card = cards[ (card = CARD_FLYVIDEO) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_STB) {
|
|
bktr->card = cards[ (card = CARD_STB) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_ASKEY) {
|
|
bktr->card = cards[ (card = CARD_ASKEY_DYNALINK_MAGIC_TVIEW) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if ((subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT)
|
|
|| (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_2)
|
|
|| (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_3)) {
|
|
bktr->card = cards[ (card = CARD_LEADTEK) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_PINNACLE_ALT ||
|
|
subsystem_vendor_id == PCI_VENDOR_PINNACLE_NEW) {
|
|
bktr->card = cards[ (card = CARD_MIRO) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_IODATA &&
|
|
subsystem_id == MODEL_IODATA_GV_BCTV3_PCI) {
|
|
bktr->card = cards[ (card = CARD_IO_BCTV3) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
if (subsystem_vendor_id == PCI_VENDOR_TERRATEC) {
|
|
switch (subsystem_id) {
|
|
case MODEL_TERRATVALUE_1117:
|
|
case MODEL_TERRATVALUE_1118:
|
|
case MODEL_TERRATVALUE_1119:
|
|
case MODEL_TERRATVALUE_111A:
|
|
case MODEL_TERRATVALUE_1134:
|
|
bktr->card = cards[ (card = CARD_TERRATVALUE) ];
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
}
|
|
|
|
/* Vendor is unknown. We will use the standard probe code */
|
|
/* which may not give best results */
|
|
printf("%s: Warning - card vendor 0x%04x (model 0x%04x) unknown.\n",
|
|
bktr_name(bktr), subsystem_vendor_id, subsystem_id);
|
|
}
|
|
else
|
|
{
|
|
printf("%s: Card has no configuration EEPROM. Cannot determine card make.\n",
|
|
bktr_name(bktr));
|
|
}
|
|
} /* end of bt878/bt879 card detection code */
|
|
|
|
/* If we get to this point, we must have a Bt848/848A/849A card */
|
|
/* or a Bt878/879 with an unknown subsystem vendor id */
|
|
/* Try and determine the make of card by clever i2c probing */
|
|
|
|
/* Check for i2c devices. If none, move on */
|
|
if (!any_i2c_devices) {
|
|
bktr->card = cards[ (card = CARD_INTEL) ];
|
|
bktr->card.eepromAddr = 0;
|
|
bktr->card.eepromSize = 0;
|
|
goto checkTuner;
|
|
}
|
|
|
|
/* Look for Hauppauge, STB and Osprey cards by the presence */
|
|
/* of an EEPROM */
|
|
/* Note: Bt878 based cards also use EEPROMs so we can only do this */
|
|
/* test on BT848/848A and 849A based cards. */
|
|
if ((bktr->id==BROOKTREE_848) ||
|
|
(bktr->id==BROOKTREE_848A) ||
|
|
(bktr->id==BROOKTREE_849A)) {
|
|
|
|
/* At i2c address 0xa0, look for Hauppauge and Osprey cards */
|
|
if ( (status = i2cRead( bktr, PFC8582_RADDR )) != ABSENT ) {
|
|
|
|
/* Read the eeprom contents */
|
|
bktr->card = cards[ (card = CARD_UNKNOWN) ];
|
|
bktr->card.eepromAddr = PFC8582_WADDR;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
readEEProm(bktr, 0, 128, (u_char *) &eeprom );
|
|
|
|
/* For Hauppauge, check the EEPROM begins with 0x84 */
|
|
if (eeprom[0] == 0x84) {
|
|
bktr->card = cards[ (card = CARD_HAUPPAUGE) ];
|
|
bktr->card.eepromAddr = PFC8582_WADDR;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
/* For Osprey, check the EEPROM begins with "MMAC" */
|
|
if ( (eeprom[0] == 'M') &&(eeprom[1] == 'M')
|
|
&&(eeprom[2] == 'A') &&(eeprom[3] == 'C')) {
|
|
bktr->card = cards[ (card = CARD_OSPREY) ];
|
|
bktr->card.eepromAddr = PFC8582_WADDR;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
printf("%s: Warning: Unknown card type. EEPROM data not recognised\n",
|
|
bktr_name(bktr));
|
|
printf("%s: %x %x %x %x\n", bktr_name(bktr),
|
|
eeprom[0],eeprom[1],eeprom[2],eeprom[3]);
|
|
}
|
|
|
|
/* look for an STB card */
|
|
if ( (status = i2cRead( bktr, X24C01_RADDR )) != ABSENT ) {
|
|
bktr->card = cards[ (card = CARD_STB) ];
|
|
bktr->card.eepromAddr = X24C01_WADDR;
|
|
bktr->card.eepromSize = (u_char)(128 / EEPROMBLOCKSIZE);
|
|
goto checkTuner;
|
|
}
|
|
|
|
}
|
|
|
|
signCard( bktr, 1, 128, (u_char *) &probe_signature );
|
|
|
|
if (bootverbose) {
|
|
printf("%s: card signature: ", bktr_name(bktr));
|
|
for (j = 0; j < Bt848_MAX_SIGN; j++) {
|
|
printf(" %02x ", probe_signature[j]);
|
|
}
|
|
printf("\n\n");
|
|
}
|
|
for (i = 0;
|
|
i < (sizeof bt848_card_signature)/ sizeof (struct bt848_card_sig);
|
|
i++ ) {
|
|
|
|
card_found = 1;
|
|
probe_temp = (u_char *) &bt848_card_signature[i].signature;
|
|
|
|
for (j = 0; j < Bt848_MAX_SIGN; j++) {
|
|
if ((probe_temp[j] & 0xf) != (probe_signature[j] & 0xf)) {
|
|
card_found = 0;
|
|
break;
|
|
}
|
|
|
|
}
|
|
if (card_found) {
|
|
bktr->card = cards[ card = bt848_card_signature[i].card];
|
|
eeprom_i2c_address = locate_eeprom_address( bktr );
|
|
if (eeprom_i2c_address != -1) {
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
} else {
|
|
bktr->card.eepromAddr = 0;
|
|
bktr->card.eepromSize = 0;
|
|
}
|
|
tuner_i2c_address = locate_tuner_address( bktr );
|
|
select_tuner( bktr, bt848_card_signature[i].tuner );
|
|
goto checkDBX;
|
|
}
|
|
}
|
|
|
|
/* We do not know the card type. Default to Miro */
|
|
bktr->card = cards[ (card = CARD_MIRO) ];
|
|
|
|
|
|
checkEEPROM:
|
|
/* look for a configuration eeprom */
|
|
eeprom_i2c_address = locate_eeprom_address( bktr );
|
|
if (eeprom_i2c_address != -1) {
|
|
bktr->card.eepromAddr = eeprom_i2c_address;
|
|
bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE);
|
|
} else {
|
|
bktr->card.eepromAddr = 0;
|
|
bktr->card.eepromSize = 0;
|
|
}
|
|
|
|
|
|
checkTuner:
|
|
|
|
#if !defined( BKTR_OVERRIDE_TUNER )
|
|
if (card == CARD_MIRO && mt2032_init(bktr) == 0 &&
|
|
bktr->bt848_tuner == -1) {
|
|
bktr->card = cards[ (card = CARD_PINNACLE_PCTV_RAVE) ];
|
|
select_tuner( bktr, TUNER_MT2032 );
|
|
goto checkDBX;
|
|
}
|
|
#endif
|
|
|
|
/* look for a tuner */
|
|
tuner_i2c_address = locate_tuner_address( bktr );
|
|
if ( tuner_i2c_address == -1 ) {
|
|
select_tuner( bktr, NO_TUNER );
|
|
goto checkDBX;
|
|
}
|
|
|
|
#if defined( BKTR_OVERRIDE_TUNER )
|
|
select_tuner( bktr, BKTR_OVERRIDE_TUNER );
|
|
goto checkDBX;
|
|
#endif
|
|
if (bktr->bt848_tuner != -1 ) {
|
|
select_tuner( bktr, bktr->bt848_tuner & 0xff );
|
|
goto checkDBX;
|
|
}
|
|
|
|
/* Check for i2c devices */
|
|
if (!any_i2c_devices) {
|
|
select_tuner( bktr, NO_TUNER );
|
|
goto checkDBX;
|
|
}
|
|
|
|
/* differentiate type of tuner */
|
|
|
|
switch (card) {
|
|
case CARD_MIRO:
|
|
switch (((INL(bktr, BKTR_GPIO_DATA) >> 10)-1)&7) {
|
|
case 0: select_tuner( bktr, TEMIC_PAL ); break;
|
|
case 1: select_tuner( bktr, PHILIPS_PAL ); break;
|
|
case 2: select_tuner( bktr, PHILIPS_NTSC ); break;
|
|
case 3: select_tuner( bktr, PHILIPS_SECAM ); break;
|
|
case 4: select_tuner( bktr, NO_TUNER ); break;
|
|
case 5: select_tuner( bktr, PHILIPS_PALI ); break;
|
|
case 6: select_tuner( bktr, TEMIC_NTSC ); break;
|
|
case 7: select_tuner( bktr, TEMIC_PALI ); break;
|
|
}
|
|
goto checkDBX;
|
|
break;
|
|
|
|
case CARD_HAUPPAUGE:
|
|
/* Hauppauge kindly supplied the following Tuner Table */
|
|
/* FIXME: I think the tuners the driver selects for types */
|
|
/* 0x08 and 0x15 may be incorrect but no one has complained. */
|
|
/* Old Temic tuners had their own API, but newer Temic tuners */
|
|
/* have the same API as Philips tuners */
|
|
/*
|
|
ID Tuner Model Format We select Format
|
|
0x00 NONE
|
|
0x01 EXTERNAL
|
|
0x02 OTHER
|
|
0x03 Philips FI1216 BG
|
|
0x04 Philips FI1216MF BGLL' PHILIPS_SECAM
|
|
0x05 Philips FI1236 MN PHILIPS_NTSC
|
|
0x06 Philips FI1246 I PHILIPS_PALI
|
|
0x07 Philips FI1256 DK
|
|
0x08 Philips FI1216 MK2 BG PHILIPS_PALI
|
|
0x09 Philips FI1216MF MK2 BGLL' PHILIPS_SECAM
|
|
0x0a Philips FI1236 MK2 MN PHILIPS_NTSC
|
|
0x0b Philips FI1246 MK2 I PHILIPS_PALI
|
|
0x0c Philips FI1256 MK2 DK
|
|
0x0d Temic 4032FY5 NTSC TEMIC_NTSC
|
|
0x0e Temic 4002FH5 BG TEMIC_PAL
|
|
0x0f Temic 4062FY5 I TEMIC_PALI
|
|
0x10 Philips FR1216 MK2 BG
|
|
0x11 Philips FR1216MF MK2 BGLL' PHILIPS_FR1236_SECAM
|
|
0x12 Philips FR1236 MK2 MN PHILIPS_FR1236_NTSC
|
|
0x13 Philips FR1246 MK2 I
|
|
0x14 Philips FR1256 MK2 DK
|
|
0x15 Philips FM1216 BG PHILIPS_FR1216_PAL
|
|
0x16 Philips FM1216MF BGLL' PHILIPS_FR1236_SECAM
|
|
0x17 Philips FM1236 MN PHILIPS_FR1236_NTSC
|
|
0x18 Philips FM1246 I
|
|
0x19 Philips FM1256 DK
|
|
0x1a Temic 4036FY5 MN (FI1236 MK2 clone) PHILIPS_NTSC
|
|
0x1b Samsung TCPN9082D MN
|
|
0x1c Samsung TCPM9092P Pal BG/I/DK
|
|
0x1d Temic 4006FH5 BG PHILIPS_PALI
|
|
0x1e Samsung TCPN9085D MN/Radio
|
|
0x1f Samsung TCPB9085P Pal BG/I/DK / Radio
|
|
0x20 Samsung TCPL9091P Pal BG & Secam L/L'
|
|
0x21 Temic 4039FY5 NTSC Radio
|
|
0x22 Philips FQ1216ME Pal BGIDK & Secam L/L'
|
|
0x23 Temic 4066FY5 Pal I (FI1246 MK2 clone) PHILIPS_PALI
|
|
0x24 Philips TD1536 MN/ATSCDigital
|
|
0x25 Philips TD1536D MN/ATSCDigital DUAL INPUT
|
|
0x26 Philips FMR1236 M/N FM(no demod)
|
|
0x27 Philips FI1256MP B/G, D/K
|
|
0x28 Samsung TCPQ9091P BG/I/DK, L/L'
|
|
0x29 Temic 4006FN5 BG/I/DK
|
|
0x2a Temic 4009FR5 BG FM PHILIPS_FR1216_PAL
|
|
0x2b Temic 4046FM5 B/G, I, D/K, L/L'
|
|
0x2c Temic 4009FN5 B/G, I, D/K, FM (no demod)
|
|
0x2d Philips TD1536D_FH_44 MN/ATSCDigital DUAL INPUT
|
|
*/
|
|
|
|
|
|
/* Determine the model number from the eeprom */
|
|
if (bktr->card.eepromAddr != 0) {
|
|
/* eeprom data block structure */
|
|
unsigned char *block_1, *block_2, *block_3, *block_4;
|
|
int block_1_data_size, block_2_data_size, block_3_data_size;
|
|
int block_1_total_size, block_2_total_size, block_3_total_size;
|
|
int block_4_header_size;
|
|
|
|
unsigned int model,revision;
|
|
unsigned char tuner_code;
|
|
unsigned char no_audio_mux;
|
|
|
|
readEEProm(bktr, 0, 128, (u_char *) &eeprom );
|
|
|
|
/* LOCATE THE EEPROM DATA BLOCKS */
|
|
block_1 = &eeprom[0];
|
|
block_1_data_size = (block_1[2] << 8 | block_1[1]);
|
|
block_1_total_size = block_1_data_size + 3; /* Header bytes */
|
|
|
|
block_2 = &eeprom[block_1_total_size];
|
|
block_2_data_size = (block_2[2] << 8 | block_2[1]);
|
|
block_2_total_size = block_2_data_size + 3; /* Header bytes */
|
|
|
|
block_3 = &eeprom[block_1_total_size + block_2_total_size];
|
|
block_3_data_size = (block_3[0] &0x07);
|
|
block_3_total_size = block_3_data_size + 1; /* Header size */
|
|
|
|
block_4 = &eeprom[block_1_total_size +block_2_total_size +block_3_total_size];
|
|
block_4_header_size = 1;
|
|
|
|
model = (block_1[12] << 8 | block_1[11]);
|
|
revision = (block_1[15] << 16 | block_1[14] << 8 | block_1[13]);
|
|
|
|
tuner_code = block_1[9];
|
|
|
|
no_audio_mux = ((block_3[3] >> 7) &0x01);
|
|
|
|
if (no_audio_mux) bktr->audio_mux_present = 0;
|
|
|
|
if (verbose)
|
|
printf("%s: Hauppauge Model %d %c%c%c%c\n",
|
|
bktr_name(bktr),
|
|
model,
|
|
((revision >> 18) & 0x3f) + 32,
|
|
((revision >> 12) & 0x3f) + 32,
|
|
((revision >> 6) & 0x3f) + 32,
|
|
((revision >> 0) & 0x3f) + 32 );
|
|
|
|
/* Determine the tuner type from the eeprom */
|
|
|
|
switch (tuner_code) {
|
|
|
|
case 0x5:
|
|
case 0x0a:
|
|
case 0x1a:
|
|
select_tuner( bktr, PHILIPS_NTSC );
|
|
goto checkDBX;
|
|
|
|
case 0x4:
|
|
case 0x9:
|
|
select_tuner( bktr, PHILIPS_SECAM );
|
|
goto checkDBX;
|
|
|
|
case 0x11:
|
|
case 0x16:
|
|
select_tuner( bktr, PHILIPS_FR1236_SECAM );
|
|
goto checkDBX;
|
|
|
|
case 0x12:
|
|
case 0x17:
|
|
case 0x21:
|
|
select_tuner( bktr, PHILIPS_FR1236_NTSC );
|
|
goto checkDBX;
|
|
|
|
case 0x6:
|
|
case 0x8:
|
|
case 0xb:
|
|
case 0x1d:
|
|
case 0x23:
|
|
select_tuner( bktr, PHILIPS_PALI );
|
|
goto checkDBX;
|
|
|
|
case 0xd:
|
|
select_tuner( bktr, TEMIC_NTSC );
|
|
goto checkDBX;
|
|
|
|
case 0xe:
|
|
select_tuner( bktr, TEMIC_PAL );
|
|
goto checkDBX;
|
|
|
|
case 0xf:
|
|
select_tuner( bktr, TEMIC_PALI );
|
|
goto checkDBX;
|
|
|
|
case 0x15:
|
|
select_tuner( bktr, PHILIPS_FR1216_PAL );
|
|
goto checkDBX;
|
|
|
|
case 0x2a:
|
|
bktr->msp_use_mono_source = 1;
|
|
select_tuner( bktr, PHILIPS_FR1216_PAL );
|
|
goto checkDBX;
|
|
|
|
default :
|
|
printf("%s: Warning - Unknown Hauppauge Tuner 0x%x\n",
|
|
bktr_name(bktr), tuner_code);
|
|
}
|
|
}
|
|
break;
|
|
|
|
|
|
case CARD_AVER_MEDIA:
|
|
/* AVerMedia kindly supplied some details of their EEPROM contents
|
|
* which allow us to auto select the Tuner Type.
|
|
* Only the newer AVerMedia cards actually have an EEPROM.
|
|
*/
|
|
if (bktr->card.eepromAddr != 0) {
|
|
|
|
u_char tuner_make; /* Eg Philips, Temic */
|
|
u_char tuner_tv_fm; /* TV or TV with FM Radio */
|
|
u_char tuner_format; /* Eg NTSC, PAL, SECAM */
|
|
int tuner;
|
|
|
|
int tuner_0_table[] = {
|
|
PHILIPS_NTSC, PHILIPS_PAL,
|
|
PHILIPS_PAL, PHILIPS_PAL,
|
|
PHILIPS_PAL, PHILIPS_PAL,
|
|
PHILIPS_SECAM, PHILIPS_SECAM,
|
|
PHILIPS_SECAM, PHILIPS_PAL};
|
|
|
|
int tuner_0_fm_table[] = {
|
|
PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
|
|
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
|
|
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
|
|
PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
|
|
PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
|
|
|
|
int tuner_1_table[] = {
|
|
TEMIC_NTSC, TEMIC_PAL, TEMIC_PAL,
|
|
TEMIC_PAL, TEMIC_PAL, TEMIC_PAL,
|
|
TEMIC_SECAM, TEMIC_SECAM, TEMIC_SECAM,
|
|
TEMIC_PAL};
|
|
|
|
|
|
/* Extract information from the EEPROM data */
|
|
readEEProm(bktr, 0, 128, (u_char *) &eeprom );
|
|
|
|
tuner_make = (eeprom[0x41] & 0x7);
|
|
tuner_tv_fm = (eeprom[0x41] & 0x18) >> 3;
|
|
tuner_format = (eeprom[0x42] & 0xf0) >> 4;
|
|
|
|
/* Treat tuner make 0 (Philips) and make 2 (LG) the same */
|
|
if ( ((tuner_make == 0) || (tuner_make == 2))
|
|
&& (tuner_format <= 9) && (tuner_tv_fm == 0) ) {
|
|
tuner = tuner_0_table[tuner_format];
|
|
select_tuner( bktr, tuner );
|
|
goto checkDBX;
|
|
}
|
|
|
|
if ( ((tuner_make == 0) || (tuner_make == 2))
|
|
&& (tuner_format <= 9) && (tuner_tv_fm == 1) ) {
|
|
tuner = tuner_0_fm_table[tuner_format];
|
|
select_tuner( bktr, tuner );
|
|
goto checkDBX;
|
|
}
|
|
|
|
if ( (tuner_make == 1) && (tuner_format <= 9) ) {
|
|
tuner = tuner_1_table[tuner_format];
|
|
select_tuner( bktr, tuner );
|
|
goto checkDBX;
|
|
}
|
|
|
|
printf("%s: Warning - Unknown AVerMedia Tuner Make %d Format %d\n",
|
|
bktr_name(bktr), tuner_make, tuner_format);
|
|
}
|
|
break;
|
|
|
|
case CARD_LEADTEK:
|
|
#if defined(BKTR_SYSTEM_DEFAULT) && BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL
|
|
select_tuner( bktr, PHILIPS_FR1216_PAL );
|
|
#else
|
|
select_tuner( bktr, PHILIPS_FR1236_NTSC );
|
|
#endif
|
|
goto checkDBX;
|
|
break;
|
|
|
|
case CARD_IO_BCTV3:
|
|
select_tuner( bktr, ALPS_TSCH5 ); /* ALPS_TSCH6, in fact. */
|
|
goto checkDBX;
|
|
break;
|
|
|
|
case CARD_TERRATVALUE:
|
|
select_tuner( bktr, PHILIPS_PAL); /* Phlips PAL tuner */
|
|
goto checkDBX;
|
|
break;
|
|
|
|
} /* end switch(card) */
|
|
|
|
|
|
/* At this point, a goto checkDBX has not occurred */
|
|
/* We have not been able to select a Tuner */
|
|
/* Some cards make use of the tuner address to */
|
|
/* identify the make/model of tuner */
|
|
|
|
/* At address 0xc0/0xc1 we often find a TEMIC NTSC */
|
|
if ( i2cRead( bktr, 0xc1 ) != ABSENT ) {
|
|
select_tuner( bktr, TEMIC_NTSC );
|
|
goto checkDBX;
|
|
}
|
|
|
|
/* At address 0xc6/0xc7 we often find a PHILIPS NTSC Tuner */
|
|
if ( i2cRead( bktr, 0xc7 ) != ABSENT ) {
|
|
select_tuner( bktr, PHILIPS_NTSC );
|
|
goto checkDBX;
|
|
}
|
|
|
|
/* Address 0xc2/0xc3 is default (or common address) for several */
|
|
/* tuners and we cannot tell which is which. */
|
|
/* And for all other tuner i2c addresses, select the default */
|
|
select_tuner( bktr, DEFAULT_TUNER );
|
|
|
|
|
|
checkDBX:
|
|
#if defined( BKTR_OVERRIDE_DBX )
|
|
bktr->card.dbx = BKTR_OVERRIDE_DBX;
|
|
goto checkMSP;
|
|
#endif
|
|
/* Check for i2c devices */
|
|
if (!any_i2c_devices) {
|
|
goto checkMSP;
|
|
}
|
|
|
|
/* probe for BTSC (dbx) chip */
|
|
if ( i2cRead( bktr, TDA9850_RADDR ) != ABSENT )
|
|
bktr->card.dbx = 1;
|
|
|
|
checkMSP:
|
|
/* If this is a Hauppauge Bt878 card, we need to enable the
|
|
* MSP 34xx audio chip.
|
|
* If this is a Hauppauge Bt848 card, reset the MSP device.
|
|
* The MSP reset line is wired to GPIO pin 5. On Bt878 cards a pulldown
|
|
* resistor holds the device in reset until we set GPIO pin 5.
|
|
*/
|
|
|
|
/* Optionally skip the MSP reset. This is handy if you initialise the
|
|
* MSP audio in another operating system (eg Windows) first and then
|
|
* do a soft reboot.
|
|
*/
|
|
|
|
#ifndef BKTR_NO_MSP_RESET
|
|
if (card == CARD_HAUPPAUGE) {
|
|
OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5));
|
|
OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
|
|
DELAY(2500); /* wait 2.5ms */
|
|
OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5)); /* write '0' */
|
|
DELAY(2500); /* wait 2.5ms */
|
|
OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */
|
|
DELAY(2500); /* wait 2.5ms */
|
|
}
|
|
#endif
|
|
|
|
#if defined( BKTR_OVERRIDE_MSP )
|
|
bktr->card.msp3400c = BKTR_OVERRIDE_MSP;
|
|
goto checkMSPEnd;
|
|
#endif
|
|
|
|
/* Check for i2c devices */
|
|
if (!any_i2c_devices) {
|
|
goto checkMSPEnd;
|
|
}
|
|
|
|
if ( i2cRead( bktr, MSP3400C_RADDR ) != ABSENT ) {
|
|
bktr->card.msp3400c = 1;
|
|
}
|
|
|
|
checkMSPEnd:
|
|
|
|
if (bktr->card.msp3400c) {
|
|
bktr->msp_addr = MSP3400C_WADDR;
|
|
msp_read_id( bktr );
|
|
printf("%s: Detected a MSP%s at 0x%x\n", bktr_name(bktr),
|
|
bktr->msp_version_string,
|
|
bktr->msp_addr);
|
|
|
|
}
|
|
|
|
/* Check for Dolby Surround Sound DPL3518A sound chip */
|
|
if ( i2cRead( bktr, DPL3518A_RADDR ) != ABSENT ) {
|
|
bktr->card.dpl3518a = 1;
|
|
}
|
|
|
|
if (bktr->card.dpl3518a) {
|
|
bktr->dpl_addr = DPL3518A_WADDR;
|
|
dpl_read_id( bktr );
|
|
printf("%s: Detected a DPL%s at 0x%x\n", bktr_name(bktr),
|
|
bktr->dpl_version_string,
|
|
bktr->dpl_addr);
|
|
}
|
|
|
|
/* Start of Check Remote */
|
|
/* Check for the Hauppauge IR Remote Control */
|
|
/* If there is an external unit, the internal will be ignored */
|
|
|
|
bktr->remote_control = 0; /* initial value */
|
|
|
|
if (any_i2c_devices) {
|
|
if (i2cRead( bktr, HAUP_REMOTE_EXT_RADDR ) != ABSENT )
|
|
{
|
|
bktr->remote_control = 1;
|
|
bktr->remote_control_addr = HAUP_REMOTE_EXT_RADDR;
|
|
}
|
|
else if (i2cRead( bktr, HAUP_REMOTE_INT_RADDR ) != ABSENT )
|
|
{
|
|
bktr->remote_control = 1;
|
|
bktr->remote_control_addr = HAUP_REMOTE_INT_RADDR;
|
|
}
|
|
|
|
}
|
|
/* If a remote control is found, poll it 5 times to turn off the LED */
|
|
if (bktr->remote_control) {
|
|
int i;
|
|
for (i=0; i<5; i++)
|
|
i2cRead( bktr, bktr->remote_control_addr );
|
|
}
|
|
/* End of Check Remote */
|
|
|
|
#if defined( BKTR_USE_PLL )
|
|
bktr->xtal_pll_mode = BT848_USE_PLL;
|
|
goto checkPLLEnd;
|
|
#endif
|
|
/* Default is to use XTALS and not PLL mode */
|
|
bktr->xtal_pll_mode = BT848_USE_XTALS;
|
|
|
|
/* Enable PLL mode for OSPREY users */
|
|
if (card == CARD_OSPREY)
|
|
bktr->xtal_pll_mode = BT848_USE_PLL;
|
|
|
|
/* Enable PLL mode for Video Highway Xtreme users */
|
|
if (card == CARD_VIDEO_HIGHWAY_XTREME)
|
|
bktr->xtal_pll_mode = BT848_USE_PLL;
|
|
|
|
|
|
/* Most (perhaps all) Bt878 cards need to be switched to PLL mode */
|
|
/* as they only fit the NTSC crystal to their cards */
|
|
/* Default to enabling PLL mode for all Bt878/879 cards */
|
|
|
|
if ((bktr->id==BROOKTREE_878 || bktr->id==BROOKTREE_879) )
|
|
bktr->xtal_pll_mode = BT848_USE_PLL;
|
|
|
|
|
|
#if defined( BKTR_USE_PLL )
|
|
checkPLLEnd:
|
|
#endif
|
|
|
|
|
|
bktr->card.tuner_pllAddr = tuner_i2c_address;
|
|
|
|
if ( verbose ) {
|
|
printf( "%s: %s", bktr_name(bktr), bktr->card.name );
|
|
if ( bktr->card.tuner )
|
|
printf( ", %s tuner", bktr->card.tuner->name );
|
|
if ( bktr->card.dbx )
|
|
printf( ", dbx stereo" );
|
|
if ( bktr->card.msp3400c )
|
|
printf( ", msp3400c stereo" );
|
|
if ( bktr->card.dpl3518a )
|
|
printf( ", dpl3518a dolby" );
|
|
if ( bktr->remote_control )
|
|
printf( ", remote control" );
|
|
printf( ".\n" );
|
|
}
|
|
}
|
|
|
|
#undef ABSENT
|