freebsd-skq/usr.sbin/stallion/stlstats/stlstats.8
1997-10-20 12:51:34 +00:00

136 lines
5.3 KiB
Groff

.\" Copyright (c) 1996 Greg Ungerer (gerg@stallion.oz.au).
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by Greg Ungerer.
.\" 4. Neither the name of the author nor the names of any co-contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd December 2, 1996
.Os FreeBSD
.Dt STLSTATS 8 i386
.Sh NAME
.Nm stlstats
.Nd "Stallion Technologies multiport serial statistics display"
.Sh SYNOPSIS
.Nm stlstats
.Op Fl hVi
.Op Fl c Ar control-device
.Op Fl b Ar board-number
.Op Fl p Ar port-number
.Op Fl d Ar port-device
.Sh DESCRIPTION
.Nm Stlstats
is used to display statistical information about the ports on Stallion
Technologies multiport serial boards.
.Pp
.Nm Stlstats
normally runs as a full screen menu driven application.
A help line is displayed at the bottom of each screen with the valid
input keys for this screen.
.Pp
Generally the digit keys ('0' through '9') specify the number of the
device to display statistics for.
Where digits alone are not enough to access all possible devices
(for example on 16 port panels) then the first letters of the alphabet
are used to access the remaining devices.
The letters 'a' through 'f' are used to access devices 10 through 15.
.Pp
The 'q' key is always used to move back to the previous level screen.
The escape key can also be used to move back to the previous screen.
.Pp
The first screen is a display of all ports on panel 0 of board 0.
Values displayed on this screen are a summary of the information for
each port. The statistics displayed are: driver and TTY state flags,
termios flags (cflags, iflags, oflags, lflags), RS-232 signal values
(as per TIOCM signal defines), total transmit and receive character
counts.
.Pp
From this screen you can look at summary information
about each panel and board installed in the system.
Each board is accessed by the digit keys ('0' through '7'),
while panels of each board can be cycled through using the 'n' key.
.Pp
The per port screen displays some detailed information about a
particular port.
This is accessed from the board screen using the 'p' key.
The first port displayed will be port 0.
To display other ports use the digit and alphabetic keys
('0' through '9' and 'a' through 'f').
This screen displays: driver and TTY state flags, hardware ID,
termios flags (cflags, iflags, oflags, lflags),
total transmitted and received character counts,
current transmit and receive characters buffered,
receiver error counts (overruns, parity, framing, lost),
software flow control characters transmitted and received,
hardware flow control actions taken,
count of transmitted and received breaks,
modem signal transitions and
current RS-232 signal states.
.Pp
The options are:
.Bl -tag -width indent
.It Fl h
Output usage information.
.It Fl V
Output version information.
.It Fl i
Output only the board type information.
This output is useful for scripts or other programs that need to know
a little bit about the board (for example an automated download script).
.Nm Stlstats
will not enter full screen interactive mode.
.It Fl c Ar control-device
Specify the board control device through which to gather port statistics.
The default is
.Pa /dev/staliomem0 .
.It Fl b Ar board-number
Specify the board number to display first.
The default is to display board 0.
.It Fl p Ar port-number
Specify the port number to display first.
.Nm Stlstats
will go straight into the port display screen (bypassing board display)
when this option is used.
.It Fl d Ar port-device
Specify the port special device file (the
.Pa /dev/ttyXXX
file) to
display first.
The board screen is bypassed and the port statistics screen is shown
immediately on start up.
.El
.Sh FILES
.Bl -tag -width /dev/staliomem0
.It Pa /dev/staliomem0
driver control device used for statistics collection
.Sh SEE ALSO
.Xr stl 4 ,
.Xr stli 4 ,
.Xr stlload 8
.Sh HISTORY
This program was originally developed by
.An Greg Ungerer Aq gerg@stallion.com .