9f25ad52ce
The AR9130 is an AR9160/AR5416 family WMAC which is glued directly to the AR913x SoC peripheral bus (APB) rather than via a PCI/PCIe bridge. The specifics: * A new build option is required to use the AR9130 - AH_SUPPORT_AR9130. This is needed due to the different location the RTC registers live with this chip; hopefully this will be undone in the future. This does currently mean that enabling this option will break non-AR9130 builds, so don't enable it unless you're specifically building an image for the AR913x SoC. * Add the new probe, attach, EEPROM and PLL methods specific to Howl. * Add a work-around to ah_eeprom_v14.c which disables some of the checks for endian-ness and magic in the EEPROM image if an eepromdata block is provided. This'll be fixed at a later stage by porting the ath9k probe code and making sure it doesn't break in other setups (which my previous attempt at this did.) * Sprinkle Howl modifications throughput the interrupt path - it doesn't implement the SYNC interrupt registers, so ignore those. * Sprinkle Howl chip powerup/down throughout the reset path; the RTC methods were * Sprinkle some other Howl workarounds in the reset path. * Hard-code an alternative setup for the AR_CFG register for Howl, that sets up things suitable for Big-Endian MIPS (which is the only platform this chip is glued to.) This has been tested on the AR913x based TP-Link WR-1043nd mode, in legacy, HT/20 and HT/40 modes. Caveats: * 2ghz has only been tested. I've not seen any 5ghz radios glued to this chipset so I can't test it. * AR5416_INTERRUPT_MITIGATION is not supported on the AR9130. At least, it isn't implemented in ath9k. Please don't enable this. * This hasn't been tested in MBSS mode or in RX/TX block-aggregation mode.
178 lines
4.7 KiB
C
178 lines
4.7 KiB
C
/*
|
|
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2002-2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#include "opt_ah.h"
|
|
|
|
#include "ah.h"
|
|
#include "ah_internal.h"
|
|
|
|
#include "ar5416/ar5416.h"
|
|
#include "ar5416/ar5416reg.h"
|
|
|
|
/*
|
|
* Notify Power Mgt is enabled in self-generated frames.
|
|
* If requested, force chip awake.
|
|
*
|
|
* Returns A_OK if chip is awake or successfully forced awake.
|
|
*
|
|
* WARNING WARNING WARNING
|
|
* There is a problem with the chip where sometimes it will not wake up.
|
|
*/
|
|
static HAL_BOOL
|
|
ar5416SetPowerModeAwake(struct ath_hal *ah, int setChip)
|
|
{
|
|
#define POWER_UP_TIME 200000
|
|
uint32_t val;
|
|
int i = 0;
|
|
|
|
if (setChip) {
|
|
/*
|
|
* Do a Power-On-Reset if OWL is shutdown
|
|
* the NetBSD driver power-cycles the Cardbus slot
|
|
* as part of the reset procedure.
|
|
*/
|
|
if ((OS_REG_READ(ah, AR_RTC_STATUS)
|
|
& AR_RTC_PM_STATUS_M) == AR_RTC_STATUS_SHUTDOWN) {
|
|
if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
|
|
goto bad;
|
|
}
|
|
|
|
if (AR_SREV_HOWL(ah))
|
|
OS_REG_SET_BIT(ah, AR_RTC_RESET, AR_RTC_RESET_EN);
|
|
|
|
OS_REG_SET_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN);
|
|
OS_DELAY(50); /* Give chip the chance to awake */
|
|
|
|
for (i = POWER_UP_TIME / 50; i != 0; i--) {
|
|
val = OS_REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M;
|
|
if (val == AR_RTC_STATUS_ON)
|
|
break;
|
|
OS_DELAY(50);
|
|
OS_REG_SET_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN);
|
|
}
|
|
bad:
|
|
if (i == 0) {
|
|
#ifdef AH_DEBUG
|
|
ath_hal_printf(ah, "%s: Failed to wakeup in %ums\n",
|
|
__func__, POWER_UP_TIME/1000);
|
|
#endif
|
|
return AH_FALSE;
|
|
}
|
|
}
|
|
|
|
OS_REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
|
|
return AH_TRUE;
|
|
#undef POWER_UP_TIME
|
|
}
|
|
|
|
/*
|
|
* Notify Power Mgt is disabled in self-generated frames.
|
|
* If requested, force chip to sleep.
|
|
*/
|
|
static void
|
|
ar5416SetPowerModeSleep(struct ath_hal *ah, int setChip)
|
|
{
|
|
OS_REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
|
|
if (setChip) {
|
|
/* Clear the RTC force wake bit to allow the mac to sleep */
|
|
OS_REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN);
|
|
if (! AR_SREV_HOWL(ah))
|
|
OS_REG_WRITE(ah, AR_RC, AR_RC_AHB|AR_RC_HOSTIF);
|
|
/* Shutdown chip. Active low */
|
|
OS_REG_CLR_BIT(ah, AR_RTC_RESET, AR_RTC_RESET_EN);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Notify Power Management is enabled in self-generating
|
|
* fames. If request, set power mode of chip to
|
|
* auto/normal. Duration in units of 128us (1/8 TU).
|
|
*/
|
|
static void
|
|
ar5416SetPowerModeNetworkSleep(struct ath_hal *ah, int setChip)
|
|
{
|
|
OS_REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
|
|
|
|
if (setChip)
|
|
OS_REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN);
|
|
}
|
|
|
|
/*
|
|
* Set power mgt to the requested mode, and conditionally set
|
|
* the chip as well
|
|
*/
|
|
HAL_BOOL
|
|
ar5416SetPowerMode(struct ath_hal *ah, HAL_POWER_MODE mode, int setChip)
|
|
{
|
|
struct ath_hal_5212 *ahp = AH5212(ah);
|
|
#ifdef AH_DEBUG
|
|
static const char* modes[] = {
|
|
"AWAKE",
|
|
"FULL-SLEEP",
|
|
"NETWORK SLEEP",
|
|
"UNDEFINED"
|
|
};
|
|
#endif
|
|
int status = AH_TRUE;
|
|
if (!setChip)
|
|
return AH_TRUE;
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_POWER, "%s: %s -> %s (%s)\n", __func__,
|
|
modes[ahp->ah_powerMode], modes[mode], setChip ? "set chip " : "");
|
|
switch (mode) {
|
|
case HAL_PM_AWAKE:
|
|
status = ar5416SetPowerModeAwake(ah, setChip);
|
|
break;
|
|
case HAL_PM_FULL_SLEEP:
|
|
ar5416SetPowerModeSleep(ah, setChip);
|
|
break;
|
|
case HAL_PM_NETWORK_SLEEP:
|
|
ar5416SetPowerModeNetworkSleep(ah, setChip);
|
|
break;
|
|
default:
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unknown power mode 0x%x\n",
|
|
__func__, mode);
|
|
return AH_FALSE;
|
|
}
|
|
ahp->ah_powerMode = mode;
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Return the current sleep mode of the chip
|
|
*/
|
|
HAL_POWER_MODE
|
|
ar5416GetPowerMode(struct ath_hal *ah)
|
|
{
|
|
int mode = OS_REG_READ(ah, AR_RTC_STATUS);
|
|
switch (mode & AR_RTC_PM_STATUS_M) {
|
|
case AR_RTC_STATUS_ON:
|
|
case AR_RTC_STATUS_WAKEUP:
|
|
return HAL_PM_AWAKE;
|
|
case AR_RTC_STATUS_SLEEP:
|
|
return HAL_PM_NETWORK_SLEEP;
|
|
case AR_RTC_STATUS_SHUTDOWN:
|
|
return HAL_PM_FULL_SLEEP;
|
|
default:
|
|
HALDEBUG(ah, HAL_DEBUG_ANY,
|
|
"%s: unknown power mode, RTC_STATUS 0x%x\n",
|
|
__func__, mode);
|
|
return HAL_PM_UNDEFINED;
|
|
}
|
|
}
|