11cfbfbb69
data rather than the old-school [1] construct. We have required c99 compilers for some time.
2563 lines
70 KiB
C
2563 lines
70 KiB
C
/* $FreeBSD$ */
|
|
/*-
|
|
* Copyright (c) 1997-2009 by Matthew Jacob
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Mailbox and Queue Entry Definitions for for Qlogic ISP SCSI adapters.
|
|
*/
|
|
#ifndef _ISPMBOX_H
|
|
#define _ISPMBOX_H
|
|
|
|
/*
|
|
* Mailbox Command Opcodes
|
|
*/
|
|
#define MBOX_NO_OP 0x0000
|
|
#define MBOX_LOAD_RAM 0x0001
|
|
#define MBOX_EXEC_FIRMWARE 0x0002
|
|
#define MBOX_DUMP_RAM 0x0003
|
|
#define MBOX_WRITE_RAM_WORD 0x0004
|
|
#define MBOX_READ_RAM_WORD 0x0005
|
|
#define MBOX_MAILBOX_REG_TEST 0x0006
|
|
#define MBOX_VERIFY_CHECKSUM 0x0007
|
|
#define MBOX_ABOUT_FIRMWARE 0x0008
|
|
#define MBOX_LOAD_RISC_RAM_2100 0x0009
|
|
/* a */
|
|
#define MBOX_LOAD_RISC_RAM 0x000b
|
|
/* c */
|
|
#define MBOX_WRITE_RAM_WORD_EXTENDED 0x000d
|
|
#define MBOX_CHECK_FIRMWARE 0x000e
|
|
#define MBOX_READ_RAM_WORD_EXTENDED 0x000f
|
|
#define MBOX_INIT_REQ_QUEUE 0x0010
|
|
#define MBOX_INIT_RES_QUEUE 0x0011
|
|
#define MBOX_EXECUTE_IOCB 0x0012
|
|
#define MBOX_WAKE_UP 0x0013
|
|
#define MBOX_STOP_FIRMWARE 0x0014
|
|
#define MBOX_ABORT 0x0015
|
|
#define MBOX_ABORT_DEVICE 0x0016
|
|
#define MBOX_ABORT_TARGET 0x0017
|
|
#define MBOX_BUS_RESET 0x0018
|
|
#define MBOX_STOP_QUEUE 0x0019
|
|
#define MBOX_START_QUEUE 0x001a
|
|
#define MBOX_SINGLE_STEP_QUEUE 0x001b
|
|
#define MBOX_ABORT_QUEUE 0x001c
|
|
#define MBOX_GET_DEV_QUEUE_STATUS 0x001d
|
|
/* 1e */
|
|
#define MBOX_GET_FIRMWARE_STATUS 0x001f
|
|
#define MBOX_GET_INIT_SCSI_ID 0x0020
|
|
#define MBOX_GET_SELECT_TIMEOUT 0x0021
|
|
#define MBOX_GET_RETRY_COUNT 0x0022
|
|
#define MBOX_GET_TAG_AGE_LIMIT 0x0023
|
|
#define MBOX_GET_CLOCK_RATE 0x0024
|
|
#define MBOX_GET_ACT_NEG_STATE 0x0025
|
|
#define MBOX_GET_ASYNC_DATA_SETUP_TIME 0x0026
|
|
#define MBOX_GET_SBUS_PARAMS 0x0027
|
|
#define MBOX_GET_PCI_PARAMS MBOX_GET_SBUS_PARAMS
|
|
#define MBOX_GET_TARGET_PARAMS 0x0028
|
|
#define MBOX_GET_DEV_QUEUE_PARAMS 0x0029
|
|
#define MBOX_GET_RESET_DELAY_PARAMS 0x002a
|
|
/* 2b */
|
|
/* 2c */
|
|
/* 2d */
|
|
/* 2e */
|
|
/* 2f */
|
|
#define MBOX_SET_INIT_SCSI_ID 0x0030
|
|
#define MBOX_SET_SELECT_TIMEOUT 0x0031
|
|
#define MBOX_SET_RETRY_COUNT 0x0032
|
|
#define MBOX_SET_TAG_AGE_LIMIT 0x0033
|
|
#define MBOX_SET_CLOCK_RATE 0x0034
|
|
#define MBOX_SET_ACT_NEG_STATE 0x0035
|
|
#define MBOX_SET_ASYNC_DATA_SETUP_TIME 0x0036
|
|
#define MBOX_SET_SBUS_CONTROL_PARAMS 0x0037
|
|
#define MBOX_SET_PCI_PARAMETERS 0x0037
|
|
#define MBOX_SET_TARGET_PARAMS 0x0038
|
|
#define MBOX_SET_DEV_QUEUE_PARAMS 0x0039
|
|
#define MBOX_SET_RESET_DELAY_PARAMS 0x003a
|
|
/* 3b */
|
|
/* 3c */
|
|
/* 3d */
|
|
/* 3e */
|
|
/* 3f */
|
|
#define MBOX_RETURN_BIOS_BLOCK_ADDR 0x0040
|
|
#define MBOX_WRITE_FOUR_RAM_WORDS 0x0041
|
|
#define MBOX_EXEC_BIOS_IOCB 0x0042
|
|
#define MBOX_SET_FW_FEATURES 0x004a
|
|
#define MBOX_GET_FW_FEATURES 0x004b
|
|
#define FW_FEATURE_FAST_POST 0x1
|
|
#define FW_FEATURE_LVD_NOTIFY 0x2
|
|
#define FW_FEATURE_RIO_32BIT 0x4
|
|
#define FW_FEATURE_RIO_16BIT 0x8
|
|
|
|
#define MBOX_INIT_REQ_QUEUE_A64 0x0052
|
|
#define MBOX_INIT_RES_QUEUE_A64 0x0053
|
|
|
|
#define MBOX_ENABLE_TARGET_MODE 0x0055
|
|
#define ENABLE_TARGET_FLAG 0x8000
|
|
#define ENABLE_TQING_FLAG 0x0004
|
|
#define ENABLE_MANDATORY_DISC 0x0002
|
|
#define MBOX_GET_TARGET_STATUS 0x0056
|
|
|
|
/* These are for the ISP2X00 FC cards */
|
|
#define MBOX_GET_LOOP_ID 0x0020
|
|
/* for 24XX cards, outgoing mailbox 7 has these values for F or FL topologies */
|
|
#define ISP24XX_INORDER 0x0100
|
|
#define ISP24XX_NPIV_SAN 0x0400
|
|
#define ISP24XX_VSAN_SAN 0x1000
|
|
#define ISP24XX_FC_SP_SAN 0x2000
|
|
|
|
#define MBOX_GET_FIRMWARE_OPTIONS 0x0028
|
|
#define MBOX_SET_FIRMWARE_OPTIONS 0x0038
|
|
#define MBOX_GET_RESOURCE_COUNT 0x0042
|
|
#define MBOX_REQUEST_OFFLINE_MODE 0x0043
|
|
#define MBOX_ENHANCED_GET_PDB 0x0047
|
|
#define MBOX_INIT_FIRMWARE_MULTI_ID 0x0048 /* 2400 only */
|
|
#define MBOX_GET_VP_DATABASE 0x0049 /* 2400 only */
|
|
#define MBOX_GET_VP_DATABASE_ENTRY 0x004a /* 2400 only */
|
|
#define MBOX_EXEC_COMMAND_IOCB_A64 0x0054
|
|
#define MBOX_INIT_FIRMWARE 0x0060
|
|
#define MBOX_GET_INIT_CONTROL_BLOCK 0x0061
|
|
#define MBOX_INIT_LIP 0x0062
|
|
#define MBOX_GET_FC_AL_POSITION_MAP 0x0063
|
|
#define MBOX_GET_PORT_DB 0x0064
|
|
#define MBOX_CLEAR_ACA 0x0065
|
|
#define MBOX_TARGET_RESET 0x0066
|
|
#define MBOX_CLEAR_TASK_SET 0x0067
|
|
#define MBOX_ABORT_TASK_SET 0x0068
|
|
#define MBOX_GET_FW_STATE 0x0069
|
|
#define MBOX_GET_PORT_NAME 0x006A
|
|
#define MBOX_GET_LINK_STATUS 0x006B
|
|
#define MBOX_INIT_LIP_RESET 0x006C
|
|
#define MBOX_SEND_SNS 0x006E
|
|
#define MBOX_FABRIC_LOGIN 0x006F
|
|
#define MBOX_SEND_CHANGE_REQUEST 0x0070
|
|
#define MBOX_FABRIC_LOGOUT 0x0071
|
|
#define MBOX_INIT_LIP_LOGIN 0x0072
|
|
#define MBOX_LUN_RESET 0x007E
|
|
|
|
#define MBOX_DRIVER_HEARTBEAT 0x005B
|
|
#define MBOX_FW_HEARTBEAT 0x005C
|
|
|
|
#define MBOX_GET_SET_DATA_RATE 0x005D /* 24XX/23XX only */
|
|
#define MBGSD_GET_RATE 0
|
|
#define MBGSD_SET_RATE 1
|
|
#define MBGSD_SET_RATE_NOW 2 /* 24XX only */
|
|
#define MBGSD_ONEGB 0
|
|
#define MBGSD_TWOGB 1
|
|
#define MBGSD_AUTO 2
|
|
#define MBGSD_FOURGB 3 /* 24XX only */
|
|
#define MBGSD_EIGHTGB 4 /* 25XX only */
|
|
|
|
|
|
#define ISP2100_SET_PCI_PARAM 0x00ff
|
|
|
|
#define MBOX_BUSY 0x04
|
|
|
|
/*
|
|
* Mailbox Command Complete Status Codes
|
|
*/
|
|
#define MBOX_COMMAND_COMPLETE 0x4000
|
|
#define MBOX_INVALID_COMMAND 0x4001
|
|
#define MBOX_HOST_INTERFACE_ERROR 0x4002
|
|
#define MBOX_TEST_FAILED 0x4003
|
|
#define MBOX_COMMAND_ERROR 0x4005
|
|
#define MBOX_COMMAND_PARAM_ERROR 0x4006
|
|
#define MBOX_PORT_ID_USED 0x4007
|
|
#define MBOX_LOOP_ID_USED 0x4008
|
|
#define MBOX_ALL_IDS_USED 0x4009
|
|
#define MBOX_NOT_LOGGED_IN 0x400A
|
|
/* pseudo mailbox completion codes */
|
|
#define MBOX_REGS_BUSY 0x6000 /* registers in use */
|
|
#define MBOX_TIMEOUT 0x6001 /* command timed out */
|
|
|
|
#define MBLOGALL 0x000f
|
|
#define MBLOGNONE 0x0000
|
|
#define MBLOGMASK(x) ((x) & 0xf)
|
|
|
|
/*
|
|
* Asynchronous event status codes
|
|
*/
|
|
#define ASYNC_BUS_RESET 0x8001
|
|
#define ASYNC_SYSTEM_ERROR 0x8002
|
|
#define ASYNC_RQS_XFER_ERR 0x8003
|
|
#define ASYNC_RSP_XFER_ERR 0x8004
|
|
#define ASYNC_QWAKEUP 0x8005
|
|
#define ASYNC_TIMEOUT_RESET 0x8006
|
|
#define ASYNC_DEVICE_RESET 0x8007
|
|
#define ASYNC_EXTMSG_UNDERRUN 0x800A
|
|
#define ASYNC_SCAM_INT 0x800B
|
|
#define ASYNC_HUNG_SCSI 0x800C
|
|
#define ASYNC_KILLED_BUS 0x800D
|
|
#define ASYNC_BUS_TRANSIT 0x800E /* LVD -> HVD, eg. */
|
|
#define ASYNC_LIP_OCCURRED 0x8010
|
|
#define ASYNC_LOOP_UP 0x8011
|
|
#define ASYNC_LOOP_DOWN 0x8012
|
|
#define ASYNC_LOOP_RESET 0x8013
|
|
#define ASYNC_PDB_CHANGED 0x8014
|
|
#define ASYNC_CHANGE_NOTIFY 0x8015
|
|
#define ASYNC_LIP_F8 0x8016
|
|
#define ASYNC_LIP_ERROR 0x8017
|
|
#define ASYNC_SECURITY_UPDATE 0x801B
|
|
#define ASYNC_CMD_CMPLT 0x8020
|
|
#define ASYNC_CTIO_DONE 0x8021
|
|
#define ASYNC_RIO32_1 0x8021
|
|
#define ASYNC_RIO32_2 0x8022
|
|
#define ASYNC_IP_XMIT_DONE 0x8022
|
|
#define ASYNC_IP_RECV_DONE 0x8023
|
|
#define ASYNC_IP_BROADCAST 0x8024
|
|
#define ASYNC_IP_RCVQ_LOW 0x8025
|
|
#define ASYNC_IP_RCVQ_EMPTY 0x8026
|
|
#define ASYNC_IP_RECV_DONE_ALIGNED 0x8027
|
|
#define ASYNC_PTPMODE 0x8030
|
|
#define ASYNC_RIO16_1 0x8031
|
|
#define ASYNC_RIO16_2 0x8032
|
|
#define ASYNC_RIO16_3 0x8033
|
|
#define ASYNC_RIO16_4 0x8034
|
|
#define ASYNC_RIO16_5 0x8035
|
|
#define ASYNC_CONNMODE 0x8036
|
|
#define ISP_CONN_LOOP 1
|
|
#define ISP_CONN_PTP 2
|
|
#define ISP_CONN_BADLIP 3
|
|
#define ISP_CONN_FATAL 4
|
|
#define ISP_CONN_LOOPBACK 5
|
|
#define ASYNC_RIOZIO_STALL 0x8040 /* there's a RIO/ZIO entry that hasn't been serviced */
|
|
#define ASYNC_RIO32_2_2200 0x8042 /* same as ASYNC_RIO32_2, but for 2100/2200 */
|
|
#define ASYNC_RCV_ERR 0x8048
|
|
|
|
/*
|
|
* Firmware Options. There are a lot of them.
|
|
*
|
|
* IFCOPTN - ISP Fibre Channel Option Word N
|
|
*/
|
|
#define IFCOPT1_EQFQASYNC (1 << 13) /* enable QFULL notification */
|
|
#define IFCOPT1_EAABSRCVD (1 << 12)
|
|
#define IFCOPT1_RJTASYNC (1 << 11) /* enable 8018 notification */
|
|
#define IFCOPT1_ENAPURE (1 << 10)
|
|
#define IFCOPT1_ENA8017 (1 << 7)
|
|
#define IFCOPT1_DISGPIO67 (1 << 6)
|
|
#define IFCOPT1_LIPLOSSIMM (1 << 5)
|
|
#define IFCOPT1_DISF7SWTCH (1 << 4)
|
|
#define IFCOPT1_CTIO_RETRY (1 << 3)
|
|
#define IFCOPT1_LIPASYNC (1 << 1)
|
|
#define IFCOPT1_LIPF8 (1 << 0)
|
|
|
|
#define IFCOPT2_LOOPBACK (1 << 1)
|
|
#define IFCOPT2_ATIO3_ONLY (1 << 0)
|
|
|
|
#define IFCOPT3_NOPRLI (1 << 4) /* disable automatic sending of PRLI on local loops */
|
|
#define IFCOPT3_RNDASYNC (1 << 1)
|
|
/*
|
|
* 2.01.31 2200 Only. Need Bit 13 in Mailbox 1 for Set Firmware Options
|
|
* mailbox command to enable this.
|
|
*/
|
|
#define ASYNC_QFULL_SENT 0x8049
|
|
|
|
/*
|
|
* Needs to be enabled
|
|
*/
|
|
#define ASYNC_AUTO_PLOGI_RJT 0x8018
|
|
/*
|
|
* 24XX only
|
|
*/
|
|
#define ASYNC_RJT_SENT 0x8049
|
|
|
|
/*
|
|
* All IOCB Queue entries are this size
|
|
*/
|
|
#define QENTRY_LEN 64
|
|
|
|
/*
|
|
* Command Structure Definitions
|
|
*/
|
|
|
|
typedef struct {
|
|
uint32_t ds_base;
|
|
uint32_t ds_count;
|
|
} ispds_t;
|
|
|
|
typedef struct {
|
|
uint32_t ds_base;
|
|
uint32_t ds_basehi;
|
|
uint32_t ds_count;
|
|
} ispds64_t;
|
|
|
|
#define DSTYPE_32BIT 0
|
|
#define DSTYPE_64BIT 1
|
|
typedef struct {
|
|
uint16_t ds_type; /* 0-> ispds_t, 1-> ispds64_t */
|
|
uint32_t ds_segment; /* unused */
|
|
uint32_t ds_base; /* 32 bit address of DSD list */
|
|
} ispdslist_t;
|
|
|
|
|
|
typedef struct {
|
|
uint8_t rqs_entry_type;
|
|
uint8_t rqs_entry_count;
|
|
uint8_t rqs_seqno;
|
|
uint8_t rqs_flags;
|
|
} isphdr_t;
|
|
|
|
/* RQS Flag definitions */
|
|
#define RQSFLAG_CONTINUATION 0x01
|
|
#define RQSFLAG_FULL 0x02
|
|
#define RQSFLAG_BADHEADER 0x04
|
|
#define RQSFLAG_BADPACKET 0x08
|
|
#define RQSFLAG_BADCOUNT 0x10
|
|
#define RQSFLAG_BADORDER 0x20
|
|
#define RQSFLAG_MASK 0x3f
|
|
|
|
/* RQS entry_type definitions */
|
|
#define RQSTYPE_REQUEST 0x01
|
|
#define RQSTYPE_DATASEG 0x02
|
|
#define RQSTYPE_RESPONSE 0x03
|
|
#define RQSTYPE_MARKER 0x04
|
|
#define RQSTYPE_CMDONLY 0x05
|
|
#define RQSTYPE_ATIO 0x06 /* Target Mode */
|
|
#define RQSTYPE_CTIO 0x07 /* Target Mode */
|
|
#define RQSTYPE_SCAM 0x08
|
|
#define RQSTYPE_A64 0x09
|
|
#define RQSTYPE_A64_CONT 0x0a
|
|
#define RQSTYPE_ENABLE_LUN 0x0b /* Target Mode */
|
|
#define RQSTYPE_MODIFY_LUN 0x0c /* Target Mode */
|
|
#define RQSTYPE_NOTIFY 0x0d /* Target Mode */
|
|
#define RQSTYPE_NOTIFY_ACK 0x0e /* Target Mode */
|
|
#define RQSTYPE_CTIO1 0x0f /* Target Mode */
|
|
#define RQSTYPE_STATUS_CONT 0x10
|
|
#define RQSTYPE_T2RQS 0x11
|
|
#define RQSTYPE_CTIO7 0x12
|
|
#define RQSTYPE_IP_XMIT 0x13
|
|
#define RQSTYPE_TSK_MGMT 0x14
|
|
#define RQSTYPE_T4RQS 0x15
|
|
#define RQSTYPE_ATIO2 0x16 /* Target Mode */
|
|
#define RQSTYPE_CTIO2 0x17 /* Target Mode */
|
|
#define RQSTYPE_T7RQS 0x18
|
|
#define RQSTYPE_T3RQS 0x19
|
|
#define RQSTYPE_IP_XMIT_64 0x1b
|
|
#define RQSTYPE_CTIO4 0x1e /* Target Mode */
|
|
#define RQSTYPE_CTIO3 0x1f /* Target Mode */
|
|
#define RQSTYPE_RIO1 0x21
|
|
#define RQSTYPE_RIO2 0x22
|
|
#define RQSTYPE_IP_RECV 0x23
|
|
#define RQSTYPE_IP_RECV_CONT 0x24
|
|
#define RQSTYPE_CT_PASSTHRU 0x29
|
|
#define RQSTYPE_MS_PASSTHRU 0x29
|
|
#define RQSTYPE_VP_CTRL 0x30 /* 24XX only */
|
|
#define RQSTYPE_VP_MODIFY 0x31 /* 24XX only */
|
|
#define RQSTYPE_RPT_ID_ACQ 0x32 /* 24XX only */
|
|
#define RQSTYPE_ABORT_IO 0x33
|
|
#define RQSTYPE_T6RQS 0x48
|
|
#define RQSTYPE_LOGIN 0x52
|
|
#define RQSTYPE_ABTS_RCVD 0x54 /* 24XX only */
|
|
#define RQSTYPE_ABTS_RSP 0x55 /* 24XX only */
|
|
|
|
|
|
#define ISP_RQDSEG 4
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint8_t req_lun_trn;
|
|
uint8_t req_target;
|
|
uint16_t req_cdblen;
|
|
uint16_t req_flags;
|
|
uint16_t req_reserved;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint8_t req_cdb[12];
|
|
ispds_t req_dataseg[ISP_RQDSEG];
|
|
} ispreq_t;
|
|
#define ISP_RQDSEG_A64 2
|
|
|
|
typedef struct {
|
|
isphdr_t mrk_header;
|
|
uint32_t mrk_handle;
|
|
uint8_t mrk_reserved0;
|
|
uint8_t mrk_target;
|
|
uint16_t mrk_modifier;
|
|
uint16_t mrk_flags;
|
|
uint16_t mrk_lun;
|
|
uint8_t mrk_reserved1[48];
|
|
} isp_marker_t;
|
|
|
|
typedef struct {
|
|
isphdr_t mrk_header;
|
|
uint32_t mrk_handle;
|
|
uint16_t mrk_nphdl;
|
|
uint8_t mrk_modifier;
|
|
uint8_t mrk_reserved0;
|
|
uint8_t mrk_reserved1;
|
|
uint8_t mrk_vphdl;
|
|
uint16_t mrk_reserved2;
|
|
uint8_t mrk_lun[8];
|
|
uint8_t mrk_reserved3[40];
|
|
} isp_marker_24xx_t;
|
|
|
|
|
|
#define SYNC_DEVICE 0
|
|
#define SYNC_TARGET 1
|
|
#define SYNC_ALL 2
|
|
#define SYNC_LIP 3
|
|
|
|
#define ISP_RQDSEG_T2 3
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint8_t req_lun_trn;
|
|
uint8_t req_target;
|
|
uint16_t req_scclun;
|
|
uint16_t req_flags;
|
|
uint8_t req_crn;
|
|
uint8_t req_reserved;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint8_t req_cdb[16];
|
|
uint32_t req_totalcnt;
|
|
ispds_t req_dataseg[ISP_RQDSEG_T2];
|
|
} ispreqt2_t;
|
|
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint16_t req_target;
|
|
uint16_t req_scclun;
|
|
uint16_t req_flags;
|
|
uint16_t req_reserved;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint8_t req_cdb[16];
|
|
uint32_t req_totalcnt;
|
|
ispds_t req_dataseg[ISP_RQDSEG_T2];
|
|
} ispreqt2e_t;
|
|
|
|
#define ISP_RQDSEG_T3 2
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint8_t req_lun_trn;
|
|
uint8_t req_target;
|
|
uint16_t req_scclun;
|
|
uint16_t req_flags;
|
|
uint8_t req_crn;
|
|
uint8_t req_reserved;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint8_t req_cdb[16];
|
|
uint32_t req_totalcnt;
|
|
ispds64_t req_dataseg[ISP_RQDSEG_T3];
|
|
} ispreqt3_t;
|
|
#define ispreq64_t ispreqt3_t /* same as.... */
|
|
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint16_t req_target;
|
|
uint16_t req_scclun;
|
|
uint16_t req_flags;
|
|
uint8_t req_crn;
|
|
uint8_t req_reserved;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint8_t req_cdb[16];
|
|
uint32_t req_totalcnt;
|
|
ispds64_t req_dataseg[ISP_RQDSEG_T3];
|
|
} ispreqt3e_t;
|
|
|
|
/* req_flag values */
|
|
#define REQFLAG_NODISCON 0x0001
|
|
#define REQFLAG_HTAG 0x0002
|
|
#define REQFLAG_OTAG 0x0004
|
|
#define REQFLAG_STAG 0x0008
|
|
#define REQFLAG_TARGET_RTN 0x0010
|
|
|
|
#define REQFLAG_NODATA 0x0000
|
|
#define REQFLAG_DATA_IN 0x0020
|
|
#define REQFLAG_DATA_OUT 0x0040
|
|
#define REQFLAG_DATA_UNKNOWN 0x0060
|
|
|
|
#define REQFLAG_DISARQ 0x0100
|
|
#define REQFLAG_FRC_ASYNC 0x0200
|
|
#define REQFLAG_FRC_SYNC 0x0400
|
|
#define REQFLAG_FRC_WIDE 0x0800
|
|
#define REQFLAG_NOPARITY 0x1000
|
|
#define REQFLAG_STOPQ 0x2000
|
|
#define REQFLAG_XTRASNS 0x4000
|
|
#define REQFLAG_PRIORITY 0x8000
|
|
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint8_t req_lun_trn;
|
|
uint8_t req_target;
|
|
uint16_t req_cdblen;
|
|
uint16_t req_flags;
|
|
uint16_t req_reserved;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint8_t req_cdb[44];
|
|
} ispextreq_t;
|
|
|
|
|
|
/*
|
|
* ISP24XX structures
|
|
*/
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint16_t req_nphdl;
|
|
uint16_t req_time;
|
|
uint16_t req_seg_count;
|
|
uint16_t req_reserved;
|
|
uint8_t req_lun[8];
|
|
uint8_t req_alen_datadir;
|
|
uint8_t req_task_management;
|
|
uint8_t req_task_attribute;
|
|
uint8_t req_crn;
|
|
uint8_t req_cdb[16];
|
|
uint32_t req_dl;
|
|
uint16_t req_tidlo;
|
|
uint8_t req_tidhi;
|
|
uint8_t req_vpidx;
|
|
ispds64_t req_dataseg;
|
|
} ispreqt7_t;
|
|
|
|
/* Task Management Request Function */
|
|
typedef struct {
|
|
isphdr_t tmf_header;
|
|
uint32_t tmf_handle;
|
|
uint16_t tmf_nphdl;
|
|
uint8_t tmf_reserved0[2];
|
|
uint16_t tmf_delay;
|
|
uint16_t tmf_timeout;
|
|
uint8_t tmf_lun[8];
|
|
uint32_t tmf_flags;
|
|
uint8_t tmf_reserved1[20];
|
|
uint16_t tmf_tidlo;
|
|
uint8_t tmf_tidhi;
|
|
uint8_t tmf_vpidx;
|
|
uint8_t tmf_reserved2[12];
|
|
} isp24xx_tmf_t;
|
|
|
|
#define ISP24XX_TMF_NOSEND 0x80000000
|
|
|
|
#define ISP24XX_TMF_LUN_RESET 0x00000010
|
|
#define ISP24XX_TMF_ABORT_TASK_SET 0x00000008
|
|
#define ISP24XX_TMF_CLEAR_TASK_SET 0x00000004
|
|
#define ISP24XX_TMF_TARGET_RESET 0x00000002
|
|
#define ISP24XX_TMF_CLEAR_ACA 0x00000001
|
|
|
|
/* I/O Abort Structure */
|
|
typedef struct {
|
|
isphdr_t abrt_header;
|
|
uint32_t abrt_handle;
|
|
uint16_t abrt_nphdl;
|
|
uint16_t abrt_options;
|
|
uint32_t abrt_cmd_handle;
|
|
uint8_t abrt_reserved[32];
|
|
uint16_t abrt_tidlo;
|
|
uint8_t abrt_tidhi;
|
|
uint8_t abrt_vpidx;
|
|
uint8_t abrt_reserved1[12];
|
|
} isp24xx_abrt_t;
|
|
|
|
#define ISP24XX_ABRT_NOSEND 0x01 /* don't actually send ABTS */
|
|
#define ISP24XX_ABRT_OKAY 0x00 /* in nphdl on return */
|
|
#define ISP24XX_ABRT_ENXIO 0x31 /* in nphdl on return */
|
|
|
|
#define ISP_CDSEG 7
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_reserved;
|
|
ispds_t req_dataseg[ISP_CDSEG];
|
|
} ispcontreq_t;
|
|
|
|
#define ISP_CDSEG64 5
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
ispds64_t req_dataseg[ISP_CDSEG64];
|
|
} ispcontreq64_t;
|
|
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint16_t req_scsi_status;
|
|
uint16_t req_completion_status;
|
|
uint16_t req_state_flags;
|
|
uint16_t req_status_flags;
|
|
uint16_t req_time;
|
|
#define req_response_len req_time /* FC only */
|
|
uint16_t req_sense_len;
|
|
uint32_t req_resid;
|
|
uint8_t req_response[8]; /* FC only */
|
|
uint8_t req_sense_data[32];
|
|
} ispstatusreq_t;
|
|
|
|
/*
|
|
* Status Continuation
|
|
*/
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint8_t req_sense_data[60];
|
|
} ispstatus_cont_t;
|
|
|
|
/*
|
|
* 24XX Type 0 status
|
|
*/
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handle;
|
|
uint16_t req_completion_status;
|
|
uint16_t req_oxid;
|
|
uint32_t req_resid;
|
|
uint16_t req_reserved0;
|
|
uint16_t req_state_flags;
|
|
uint16_t req_reserved1;
|
|
uint16_t req_scsi_status;
|
|
uint32_t req_fcp_residual;
|
|
uint32_t req_sense_len;
|
|
uint32_t req_response_len;
|
|
uint8_t req_rsp_sense[28];
|
|
} isp24xx_statusreq_t;
|
|
|
|
/*
|
|
* For Qlogic 2X00, the high order byte of SCSI status has
|
|
* additional meaning.
|
|
*/
|
|
#define RQCS_RU 0x800 /* Residual Under */
|
|
#define RQCS_RO 0x400 /* Residual Over */
|
|
#define RQCS_RESID (RQCS_RU|RQCS_RO)
|
|
#define RQCS_SV 0x200 /* Sense Length Valid */
|
|
#define RQCS_RV 0x100 /* FCP Response Length Valid */
|
|
|
|
/*
|
|
* CT Passthru IOCB
|
|
*/
|
|
typedef struct {
|
|
isphdr_t ctp_header;
|
|
uint32_t ctp_handle;
|
|
uint16_t ctp_status;
|
|
uint16_t ctp_nphdl; /* n-port handle */
|
|
uint16_t ctp_cmd_cnt; /* Command DSD count */
|
|
uint8_t ctp_vpidx;
|
|
uint8_t ctp_reserved0;
|
|
uint16_t ctp_time;
|
|
uint16_t ctp_reserved1;
|
|
uint16_t ctp_rsp_cnt; /* Response DSD count */
|
|
uint16_t ctp_reserved2[5];
|
|
uint32_t ctp_rsp_bcnt; /* Response byte count */
|
|
uint32_t ctp_cmd_bcnt; /* Command byte count */
|
|
ispds64_t ctp_dataseg[2];
|
|
} isp_ct_pt_t;
|
|
|
|
/*
|
|
* MS Passthru IOCB
|
|
*/
|
|
typedef struct {
|
|
isphdr_t ms_header;
|
|
uint32_t ms_handle;
|
|
uint16_t ms_nphdl; /* handle in high byte for !2k f/w */
|
|
uint16_t ms_status;
|
|
uint16_t ms_flags;
|
|
uint16_t ms_reserved1; /* low 8 bits */
|
|
uint16_t ms_time;
|
|
uint16_t ms_cmd_cnt; /* Command DSD count */
|
|
uint16_t ms_tot_cnt; /* Total DSD Count */
|
|
uint8_t ms_type; /* MS type */
|
|
uint8_t ms_r_ctl; /* R_CTL */
|
|
uint16_t ms_rxid; /* RX_ID */
|
|
uint16_t ms_reserved2;
|
|
uint32_t ms_handle2;
|
|
uint32_t ms_rsp_bcnt; /* Response byte count */
|
|
uint32_t ms_cmd_bcnt; /* Command byte count */
|
|
ispds64_t ms_dataseg[2];
|
|
} isp_ms_t;
|
|
|
|
/*
|
|
* Completion Status Codes.
|
|
*/
|
|
#define RQCS_COMPLETE 0x0000
|
|
#define RQCS_DMA_ERROR 0x0002
|
|
#define RQCS_RESET_OCCURRED 0x0004
|
|
#define RQCS_ABORTED 0x0005
|
|
#define RQCS_TIMEOUT 0x0006
|
|
#define RQCS_DATA_OVERRUN 0x0007
|
|
#define RQCS_DATA_UNDERRUN 0x0015
|
|
#define RQCS_QUEUE_FULL 0x001C
|
|
|
|
/* 1X00 Only Completion Codes */
|
|
#define RQCS_INCOMPLETE 0x0001
|
|
#define RQCS_TRANSPORT_ERROR 0x0003
|
|
#define RQCS_COMMAND_OVERRUN 0x0008
|
|
#define RQCS_STATUS_OVERRUN 0x0009
|
|
#define RQCS_BAD_MESSAGE 0x000a
|
|
#define RQCS_NO_MESSAGE_OUT 0x000b
|
|
#define RQCS_EXT_ID_FAILED 0x000c
|
|
#define RQCS_IDE_MSG_FAILED 0x000d
|
|
#define RQCS_ABORT_MSG_FAILED 0x000e
|
|
#define RQCS_REJECT_MSG_FAILED 0x000f
|
|
#define RQCS_NOP_MSG_FAILED 0x0010
|
|
#define RQCS_PARITY_ERROR_MSG_FAILED 0x0011
|
|
#define RQCS_DEVICE_RESET_MSG_FAILED 0x0012
|
|
#define RQCS_ID_MSG_FAILED 0x0013
|
|
#define RQCS_UNEXP_BUS_FREE 0x0014
|
|
#define RQCS_XACT_ERR1 0x0018
|
|
#define RQCS_XACT_ERR2 0x0019
|
|
#define RQCS_XACT_ERR3 0x001A
|
|
#define RQCS_BAD_ENTRY 0x001B
|
|
#define RQCS_PHASE_SKIPPED 0x001D
|
|
#define RQCS_ARQS_FAILED 0x001E
|
|
#define RQCS_WIDE_FAILED 0x001F
|
|
#define RQCS_SYNCXFER_FAILED 0x0020
|
|
#define RQCS_LVD_BUSERR 0x0021
|
|
|
|
/* 2X00 Only Completion Codes */
|
|
#define RQCS_PORT_UNAVAILABLE 0x0028
|
|
#define RQCS_PORT_LOGGED_OUT 0x0029
|
|
#define RQCS_PORT_CHANGED 0x002A
|
|
#define RQCS_PORT_BUSY 0x002B
|
|
|
|
/* 24XX Only Completion Codes */
|
|
#define RQCS_24XX_DRE 0x0011 /* data reassembly error */
|
|
#define RQCS_24XX_TABORT 0x0013 /* aborted by target */
|
|
#define RQCS_24XX_ENOMEM 0x002C /* f/w resource unavailable */
|
|
#define RQCS_24XX_TMO 0x0030 /* task management overrun */
|
|
|
|
|
|
/*
|
|
* 1X00 specific State Flags
|
|
*/
|
|
#define RQSF_GOT_BUS 0x0100
|
|
#define RQSF_GOT_TARGET 0x0200
|
|
#define RQSF_SENT_CDB 0x0400
|
|
#define RQSF_XFRD_DATA 0x0800
|
|
#define RQSF_GOT_STATUS 0x1000
|
|
#define RQSF_GOT_SENSE 0x2000
|
|
#define RQSF_XFER_COMPLETE 0x4000
|
|
|
|
/*
|
|
* 2X00 specific State Flags
|
|
* (same as 1X00 except RQSF_GOT_BUS/RQSF_GOT_TARGET are not available)
|
|
*/
|
|
#define RQSF_DATA_IN 0x0020
|
|
#define RQSF_DATA_OUT 0x0040
|
|
#define RQSF_STAG 0x0008
|
|
#define RQSF_OTAG 0x0004
|
|
#define RQSF_HTAG 0x0002
|
|
/*
|
|
* 1X00 Status Flags
|
|
*/
|
|
#define RQSTF_DISCONNECT 0x0001
|
|
#define RQSTF_SYNCHRONOUS 0x0002
|
|
#define RQSTF_PARITY_ERROR 0x0004
|
|
#define RQSTF_BUS_RESET 0x0008
|
|
#define RQSTF_DEVICE_RESET 0x0010
|
|
#define RQSTF_ABORTED 0x0020
|
|
#define RQSTF_TIMEOUT 0x0040
|
|
#define RQSTF_NEGOTIATION 0x0080
|
|
|
|
/*
|
|
* 2X00 specific state flags
|
|
*/
|
|
/* RQSF_SENT_CDB */
|
|
/* RQSF_XFRD_DATA */
|
|
/* RQSF_GOT_STATUS */
|
|
/* RQSF_XFER_COMPLETE */
|
|
|
|
/*
|
|
* 2X00 specific status flags
|
|
*/
|
|
/* RQSTF_ABORTED */
|
|
/* RQSTF_TIMEOUT */
|
|
#define RQSTF_DMA_ERROR 0x0080
|
|
#define RQSTF_LOGOUT 0x2000
|
|
|
|
/*
|
|
* Miscellaneous
|
|
*/
|
|
#ifndef ISP_EXEC_THROTTLE
|
|
#define ISP_EXEC_THROTTLE 16
|
|
#endif
|
|
|
|
/*
|
|
* About Firmware returns an 'attribute' word in mailbox 6.
|
|
* These attributes are for 2200 and 2300.
|
|
*/
|
|
#define ISP_FW_ATTR_TMODE 0x0001
|
|
#define ISP_FW_ATTR_SCCLUN 0x0002
|
|
#define ISP_FW_ATTR_FABRIC 0x0004
|
|
#define ISP_FW_ATTR_CLASS2 0x0008
|
|
#define ISP_FW_ATTR_FCTAPE 0x0010
|
|
#define ISP_FW_ATTR_IP 0x0020
|
|
#define ISP_FW_ATTR_VI 0x0040
|
|
#define ISP_FW_ATTR_VI_SOLARIS 0x0080
|
|
#define ISP_FW_ATTR_2KLOGINS 0x0100 /* just a guess... */
|
|
|
|
/* and these are for the 2400 */
|
|
#define ISP2400_FW_ATTR_CLASS2 0x0001
|
|
#define ISP2400_FW_ATTR_IP 0x0002
|
|
#define ISP2400_FW_ATTR_MULTIID 0x0004
|
|
#define ISP2400_FW_ATTR_SB2 0x0008
|
|
#define ISP2400_FW_ATTR_T10CRC 0x0010
|
|
#define ISP2400_FW_ATTR_VI 0x0020
|
|
#define ISP2400_FW_ATTR_VP0 0x1000
|
|
#define ISP2400_FW_ATTR_EXPFW 0x2000
|
|
#define ISP2400_FW_ATTR_EXTNDED 0x8000
|
|
|
|
/*
|
|
* These are either manifestly true or are dependent on f/w attributes
|
|
*/
|
|
#define ISP_CAP_TMODE(isp) \
|
|
(IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_TMODE))
|
|
#define ISP_CAP_SCCFW(isp) \
|
|
(IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_SCCLUN))
|
|
#define ISP_CAP_2KLOGIN(isp) \
|
|
(IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_2KLOGINS))
|
|
|
|
/*
|
|
* This is only true for 24XX cards with this f/w attribute
|
|
*/
|
|
#define ISP_CAP_MULTI_ID(isp) \
|
|
(IS_24XX(isp)? (isp->isp_fwattr & ISP2400_FW_ATTR_MULTIID) : 0)
|
|
#define ISP_GET_VPIDX(isp, tag) \
|
|
(ISP_CAP_MULTI_ID(isp) ? tag : 0)
|
|
|
|
/*
|
|
* This is true manifestly or is dependent on a f/w attribute
|
|
* but may or may not actually be *enabled*. In any case, it
|
|
* is enabled on a per-channel basis.
|
|
*/
|
|
#define ISP_CAP_FCTAPE(isp) \
|
|
(IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_FCTAPE))
|
|
|
|
#define ISP_FCTAPE_ENABLED(isp, chan) \
|
|
(IS_24XX(isp)? (FCPARAM(isp, chan)->isp_xfwoptions & ICB2400_OPT2_FCTAPE) != 0 : (FCPARAM(isp, chan)->isp_xfwoptions & ICBXOPT_FCTAPE) != 0)
|
|
|
|
/*
|
|
* Reduced Interrupt Operation Response Queue Entries
|
|
*/
|
|
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint32_t req_handles[15];
|
|
} isp_rio1_t;
|
|
|
|
typedef struct {
|
|
isphdr_t req_header;
|
|
uint16_t req_handles[30];
|
|
} isp_rio2_t;
|
|
|
|
/*
|
|
* FC (ISP2100/ISP2200/ISP2300/ISP2400) specific data structures
|
|
*/
|
|
|
|
/*
|
|
* Initialization Control Block
|
|
*
|
|
* Version One (prime) format.
|
|
*/
|
|
typedef struct {
|
|
uint8_t icb_version;
|
|
uint8_t icb_reserved0;
|
|
uint16_t icb_fwoptions;
|
|
uint16_t icb_maxfrmlen;
|
|
uint16_t icb_maxalloc;
|
|
uint16_t icb_execthrottle;
|
|
uint8_t icb_retry_count;
|
|
uint8_t icb_retry_delay;
|
|
uint8_t icb_portname[8];
|
|
uint16_t icb_hardaddr;
|
|
uint8_t icb_iqdevtype;
|
|
uint8_t icb_logintime;
|
|
uint8_t icb_nodename[8];
|
|
uint16_t icb_rqstout;
|
|
uint16_t icb_rspnsin;
|
|
uint16_t icb_rqstqlen;
|
|
uint16_t icb_rsltqlen;
|
|
uint16_t icb_rqstaddr[4];
|
|
uint16_t icb_respaddr[4];
|
|
uint16_t icb_lunenables;
|
|
uint8_t icb_ccnt;
|
|
uint8_t icb_icnt;
|
|
uint16_t icb_lunetimeout;
|
|
uint16_t icb_reserved1;
|
|
uint16_t icb_xfwoptions;
|
|
uint8_t icb_racctimer;
|
|
uint8_t icb_idelaytimer;
|
|
uint16_t icb_zfwoptions;
|
|
uint16_t icb_reserved2[13];
|
|
} isp_icb_t;
|
|
|
|
#define ICB_VERSION1 1
|
|
|
|
#define ICBOPT_EXTENDED 0x8000
|
|
#define ICBOPT_BOTH_WWNS 0x4000
|
|
#define ICBOPT_FULL_LOGIN 0x2000
|
|
#define ICBOPT_STOP_ON_QFULL 0x1000 /* 2200/2100 only */
|
|
#define ICBOPT_PREVLOOP 0x0800
|
|
#define ICBOPT_SRCHDOWN 0x0400
|
|
#define ICBOPT_NOLIP 0x0200
|
|
#define ICBOPT_PDBCHANGE_AE 0x0100
|
|
#define ICBOPT_TGT_TYPE 0x0080
|
|
#define ICBOPT_INI_ADISC 0x0040
|
|
#define ICBOPT_INI_DISABLE 0x0020
|
|
#define ICBOPT_TGT_ENABLE 0x0010
|
|
#define ICBOPT_FAST_POST 0x0008
|
|
#define ICBOPT_FULL_DUPLEX 0x0004
|
|
#define ICBOPT_FAIRNESS 0x0002
|
|
#define ICBOPT_HARD_ADDRESS 0x0001
|
|
|
|
#define ICBXOPT_NO_LOGOUT 0x8000 /* no logout on link failure */
|
|
#define ICBXOPT_FCTAPE_CCQ 0x4000 /* FC-Tape Command Queueing */
|
|
#define ICBXOPT_FCTAPE_CONFIRM 0x2000
|
|
#define ICBXOPT_FCTAPE 0x1000
|
|
#define ICBXOPT_CLASS2_ACK0 0x0200
|
|
#define ICBXOPT_CLASS2 0x0100
|
|
#define ICBXOPT_NO_PLAY 0x0080 /* don't play if can't get hard addr */
|
|
#define ICBXOPT_TOPO_MASK 0x0070
|
|
#define ICBXOPT_LOOP_ONLY 0x0000
|
|
#define ICBXOPT_PTP_ONLY 0x0010
|
|
#define ICBXOPT_LOOP_2_PTP 0x0020
|
|
#define ICBXOPT_PTP_2_LOOP 0x0030
|
|
/*
|
|
* The lower 4 bits of the xfwoptions field are the OPERATION MODE bits.
|
|
* RIO is not defined for the 23XX cards (just 2200)
|
|
*/
|
|
#define ICBXOPT_RIO_OFF 0
|
|
#define ICBXOPT_RIO_16BIT 1
|
|
#define ICBXOPT_RIO_32BIT 2
|
|
#define ICBXOPT_RIO_16BIT_IOCB 3
|
|
#define ICBXOPT_RIO_32BIT_IOCB 4
|
|
#define ICBXOPT_ZIO 5
|
|
#define ICBXOPT_TIMER_MASK 0x7
|
|
|
|
#define ICBZOPT_RATE_MASK 0xC000
|
|
#define ICBZOPT_RATE_ONEGB 0x0000
|
|
#define ICBZOPT_RATE_AUTO 0x8000
|
|
#define ICBZOPT_RATE_TWOGB 0x4000
|
|
#define ICBZOPT_50_OHM 0x2000
|
|
#define ICBZOPT_ENA_OOF 0x0040 /* out of order frame handling */
|
|
#define ICBZOPT_RSPSZ_MASK 0x0030
|
|
#define ICBZOPT_RSPSZ_24 0x0000
|
|
#define ICBZOPT_RSPSZ_12 0x0010
|
|
#define ICBZOPT_RSPSZ_24A 0x0020
|
|
#define ICBZOPT_RSPSZ_32 0x0030
|
|
#define ICBZOPT_SOFTID 0x0002
|
|
#define ICBZOPT_ENA_RDXFR_RDY 0x0001
|
|
|
|
/* 2400 F/W options */
|
|
#define ICB2400_OPT1_BOTH_WWNS 0x00004000
|
|
#define ICB2400_OPT1_FULL_LOGIN 0x00002000
|
|
#define ICB2400_OPT1_PREVLOOP 0x00000800
|
|
#define ICB2400_OPT1_SRCHDOWN 0x00000400
|
|
#define ICB2400_OPT1_NOLIP 0x00000200
|
|
#define ICB2400_OPT1_INI_DISABLE 0x00000020
|
|
#define ICB2400_OPT1_TGT_ENABLE 0x00000010
|
|
#define ICB2400_OPT1_FULL_DUPLEX 0x00000004
|
|
#define ICB2400_OPT1_FAIRNESS 0x00000002
|
|
#define ICB2400_OPT1_HARD_ADDRESS 0x00000001
|
|
|
|
#define ICB2400_OPT2_TPRLIC 0x00004000
|
|
#define ICB2400_OPT2_FCTAPE 0x00001000
|
|
#define ICB2400_OPT2_FCSP 0x00000800
|
|
#define ICB2400_OPT2_CLASS2_ACK0 0x00000200
|
|
#define ICB2400_OPT2_CLASS2 0x00000100
|
|
#define ICB2400_OPT2_NO_PLAY 0x00000080
|
|
#define ICB2400_OPT2_TOPO_MASK 0x00000070
|
|
#define ICB2400_OPT2_LOOP_ONLY 0x00000000
|
|
#define ICB2400_OPT2_PTP_ONLY 0x00000010
|
|
#define ICB2400_OPT2_LOOP_2_PTP 0x00000020
|
|
#define ICB2400_OPT2_TIMER_MASK 0x0000000f
|
|
#define ICB2400_OPT2_ZIO 0x00000005
|
|
#define ICB2400_OPT2_ZIO1 0x00000006
|
|
|
|
#define ICB2400_OPT3_75_OHM 0x00010000
|
|
#define ICB2400_OPT3_RATE_MASK 0x0000E000
|
|
#define ICB2400_OPT3_RATE_ONEGB 0x00000000
|
|
#define ICB2400_OPT3_RATE_TWOGB 0x00002000
|
|
#define ICB2400_OPT3_RATE_AUTO 0x00004000
|
|
#define ICB2400_OPT3_RATE_FOURGB 0x00006000
|
|
#define ICB2400_OPT3_RATE_EIGHTGB 0x00008000
|
|
#define ICB2400_OPT3_ENA_OOF_XFRDY 0x00000200
|
|
#define ICB2400_OPT3_NO_LOCAL_PLOGI 0x00000080
|
|
#define ICB2400_OPT3_ENA_OOF 0x00000040
|
|
/* note that a response size flag of zero is reserved! */
|
|
#define ICB2400_OPT3_RSPSZ_MASK 0x00000030
|
|
#define ICB2400_OPT3_RSPSZ_12 0x00000010
|
|
#define ICB2400_OPT3_RSPSZ_24 0x00000020
|
|
#define ICB2400_OPT3_RSPSZ_32 0x00000030
|
|
#define ICB2400_OPT3_SOFTID 0x00000002
|
|
|
|
#define ICB_MIN_FRMLEN 256
|
|
#define ICB_MAX_FRMLEN 2112
|
|
#define ICB_DFLT_FRMLEN 1024
|
|
#define ICB_DFLT_ALLOC 256
|
|
#define ICB_DFLT_THROTTLE 16
|
|
#define ICB_DFLT_RDELAY 5
|
|
#define ICB_DFLT_RCOUNT 3
|
|
|
|
#define ICB_LOGIN_TOV 30
|
|
#define ICB_LUN_ENABLE_TOV 15
|
|
|
|
|
|
/*
|
|
* And somebody at QLogic had a great idea that you could just change
|
|
* the structure *and* keep the version number the same as the other cards.
|
|
*/
|
|
typedef struct {
|
|
uint16_t icb_version;
|
|
uint16_t icb_reserved0;
|
|
uint16_t icb_maxfrmlen;
|
|
uint16_t icb_execthrottle;
|
|
uint16_t icb_xchgcnt;
|
|
uint16_t icb_hardaddr;
|
|
uint8_t icb_portname[8];
|
|
uint8_t icb_nodename[8];
|
|
uint16_t icb_rspnsin;
|
|
uint16_t icb_rqstout;
|
|
uint16_t icb_retry_count;
|
|
uint16_t icb_priout;
|
|
uint16_t icb_rsltqlen;
|
|
uint16_t icb_rqstqlen;
|
|
uint16_t icb_ldn_nols;
|
|
uint16_t icb_prqstqlen;
|
|
uint16_t icb_rqstaddr[4];
|
|
uint16_t icb_respaddr[4];
|
|
uint16_t icb_priaddr[4];
|
|
uint16_t icb_reserved1[4];
|
|
uint16_t icb_atio_in;
|
|
uint16_t icb_atioqlen;
|
|
uint16_t icb_atioqaddr[4];
|
|
uint16_t icb_idelaytimer;
|
|
uint16_t icb_logintime;
|
|
uint32_t icb_fwoptions1;
|
|
uint32_t icb_fwoptions2;
|
|
uint32_t icb_fwoptions3;
|
|
uint16_t icb_reserved2[12];
|
|
} isp_icb_2400_t;
|
|
|
|
#define RQRSP_ADDR0015 0
|
|
#define RQRSP_ADDR1631 1
|
|
#define RQRSP_ADDR3247 2
|
|
#define RQRSP_ADDR4863 3
|
|
|
|
|
|
#define ICB_NNM0 7
|
|
#define ICB_NNM1 6
|
|
#define ICB_NNM2 5
|
|
#define ICB_NNM3 4
|
|
#define ICB_NNM4 3
|
|
#define ICB_NNM5 2
|
|
#define ICB_NNM6 1
|
|
#define ICB_NNM7 0
|
|
|
|
#define MAKE_NODE_NAME_FROM_WWN(array, wwn) \
|
|
array[ICB_NNM0] = (uint8_t) ((wwn >> 0) & 0xff), \
|
|
array[ICB_NNM1] = (uint8_t) ((wwn >> 8) & 0xff), \
|
|
array[ICB_NNM2] = (uint8_t) ((wwn >> 16) & 0xff), \
|
|
array[ICB_NNM3] = (uint8_t) ((wwn >> 24) & 0xff), \
|
|
array[ICB_NNM4] = (uint8_t) ((wwn >> 32) & 0xff), \
|
|
array[ICB_NNM5] = (uint8_t) ((wwn >> 40) & 0xff), \
|
|
array[ICB_NNM6] = (uint8_t) ((wwn >> 48) & 0xff), \
|
|
array[ICB_NNM7] = (uint8_t) ((wwn >> 56) & 0xff)
|
|
|
|
#define MAKE_WWN_FROM_NODE_NAME(wwn, array) \
|
|
wwn = ((uint64_t) array[ICB_NNM0]) | \
|
|
((uint64_t) array[ICB_NNM1] << 8) | \
|
|
((uint64_t) array[ICB_NNM2] << 16) | \
|
|
((uint64_t) array[ICB_NNM3] << 24) | \
|
|
((uint64_t) array[ICB_NNM4] << 32) | \
|
|
((uint64_t) array[ICB_NNM5] << 40) | \
|
|
((uint64_t) array[ICB_NNM6] << 48) | \
|
|
((uint64_t) array[ICB_NNM7] << 56)
|
|
|
|
|
|
/*
|
|
* For MULTI_ID firmware, this describes a
|
|
* virtual port entity for getting status.
|
|
*/
|
|
typedef struct {
|
|
uint16_t vp_port_status;
|
|
uint8_t vp_port_options;
|
|
uint8_t vp_port_loopid;
|
|
uint8_t vp_port_portname[8];
|
|
uint8_t vp_port_nodename[8];
|
|
uint16_t vp_port_portid_lo; /* not present when trailing icb */
|
|
uint16_t vp_port_portid_hi; /* not present when trailing icb */
|
|
} vp_port_info_t;
|
|
|
|
#define ICB2400_VPOPT_TGT_DISABLE 0x00000020 /* disable target mode */
|
|
#define ICB2400_VPOPT_INI_ENABLE 0x00000010 /* enable initiator mode */
|
|
#define ICB2400_VPOPT_ENABLED 0x00000008
|
|
#define ICB2400_VPOPT_NOPLAY 0x00000004
|
|
#define ICB2400_VPOPT_PREVLOOP 0x00000002
|
|
#define ICB2400_VPOPT_HARD_ADDRESS 0x00000001
|
|
|
|
#define ICB2400_VPOPT_WRITE_SIZE 20
|
|
|
|
/*
|
|
* For MULTI_ID firmware, we append this structure
|
|
* to the isp_icb_2400_t above, followed by a list
|
|
* structures that are *most* of the vp_port_info_t.
|
|
*/
|
|
typedef struct {
|
|
uint16_t vp_count;
|
|
uint16_t vp_global_options;
|
|
} isp_icb_2400_vpinfo_t;
|
|
|
|
#define ICB2400_VPINFO_OFF 0x80 /* offset from start of ICB */
|
|
#define ICB2400_VPINFO_PORT_OFF(chan) \
|
|
ICB2400_VPINFO_OFF + \
|
|
sizeof (isp_icb_2400_vpinfo_t) + ((chan - 1) * ICB2400_VPOPT_WRITE_SIZE)
|
|
|
|
#define ICB2400_VPGOPT_FCA 0x01 /* Assume Clean Address bit in FLOGI ACC set (works only in static configurations) */
|
|
#define ICB2400_VPGOPT_MID_DISABLE 0x02 /* when set, connection mode2 will work with NPIV-capable switched */
|
|
#define ICB2400_VPGOPT_VP0_DECOUPLE 0x04 /* Allow VP0 decoupling if firmware supports it */
|
|
|
|
typedef struct {
|
|
isphdr_t vp_ctrl_hdr;
|
|
uint32_t vp_ctrl_handle;
|
|
uint16_t vp_ctrl_index_fail;
|
|
uint16_t vp_ctrl_status;
|
|
uint16_t vp_ctrl_command;
|
|
uint16_t vp_ctrl_vp_count;
|
|
uint16_t vp_ctrl_idmap[8];
|
|
uint8_t vp_ctrl_reserved[32];
|
|
} vp_ctrl_info_t;
|
|
|
|
#define VP_CTRL_CMD_ENABLE_VP 0
|
|
#define VP_CTRL_CMD_DISABLE_VP 8
|
|
#define VP_CTRL_CMD_DISABLE_VP_REINIT_LINK 9
|
|
#define VP_CTRL_CMD_DISABLE_VP_LOGO 0xA
|
|
|
|
/*
|
|
* We can use this structure for modifying either one or two VP ports after initialization
|
|
*/
|
|
typedef struct {
|
|
isphdr_t vp_mod_hdr;
|
|
uint32_t vp_mod_hdl;
|
|
uint16_t vp_mod_reserved0;
|
|
uint16_t vp_mod_status;
|
|
uint8_t vp_mod_cmd;
|
|
uint8_t vp_mod_cnt;
|
|
uint8_t vp_mod_idx0;
|
|
uint8_t vp_mod_idx1;
|
|
struct {
|
|
uint8_t options;
|
|
uint8_t loopid;
|
|
uint16_t reserved1;
|
|
uint8_t wwpn[8];
|
|
uint8_t wwnn[8];
|
|
} vp_mod_ports[2];
|
|
uint8_t vp_mod_reserved2[8];
|
|
} vp_modify_t;
|
|
|
|
#define VP_STS_OK 0x00
|
|
#define VP_STS_ERR 0x01
|
|
#define VP_CNT_ERR 0x02
|
|
#define VP_GEN_ERR 0x03
|
|
#define VP_IDX_ERR 0x04
|
|
#define VP_STS_BSY 0x05
|
|
|
|
#define VP_MODIFY_VP 0x00
|
|
#define VP_MODIFY_ENA 0x01
|
|
|
|
/*
|
|
* Port Data Base Element
|
|
*/
|
|
|
|
typedef struct {
|
|
uint16_t pdb_options;
|
|
uint8_t pdb_mstate;
|
|
uint8_t pdb_sstate;
|
|
uint8_t pdb_hardaddr_bits[4];
|
|
uint8_t pdb_portid_bits[4];
|
|
uint8_t pdb_nodename[8];
|
|
uint8_t pdb_portname[8];
|
|
uint16_t pdb_execthrottle;
|
|
uint16_t pdb_exec_count;
|
|
uint8_t pdb_retry_count;
|
|
uint8_t pdb_retry_delay;
|
|
uint16_t pdb_resalloc;
|
|
uint16_t pdb_curalloc;
|
|
uint16_t pdb_qhead;
|
|
uint16_t pdb_qtail;
|
|
uint16_t pdb_tl_next;
|
|
uint16_t pdb_tl_last;
|
|
uint16_t pdb_features; /* PLOGI, Common Service */
|
|
uint16_t pdb_pconcurrnt; /* PLOGI, Common Service */
|
|
uint16_t pdb_roi; /* PLOGI, Common Service */
|
|
uint8_t pdb_target;
|
|
uint8_t pdb_initiator; /* PLOGI, Class 3 Control Flags */
|
|
uint16_t pdb_rdsiz; /* PLOGI, Class 3 */
|
|
uint16_t pdb_ncseq; /* PLOGI, Class 3 */
|
|
uint16_t pdb_noseq; /* PLOGI, Class 3 */
|
|
uint16_t pdb_labrtflg;
|
|
uint16_t pdb_lstopflg;
|
|
uint16_t pdb_sqhead;
|
|
uint16_t pdb_sqtail;
|
|
uint16_t pdb_ptimer;
|
|
uint16_t pdb_nxt_seqid;
|
|
uint16_t pdb_fcount;
|
|
uint16_t pdb_prli_len;
|
|
uint16_t pdb_prli_svc0;
|
|
uint16_t pdb_prli_svc3;
|
|
uint16_t pdb_loopid;
|
|
uint16_t pdb_il_ptr;
|
|
uint16_t pdb_sl_ptr;
|
|
} isp_pdb_21xx_t;
|
|
|
|
#define PDB_OPTIONS_XMITTING (1<<11)
|
|
#define PDB_OPTIONS_LNKXMIT (1<<10)
|
|
#define PDB_OPTIONS_ABORTED (1<<9)
|
|
#define PDB_OPTIONS_ADISC (1<<1)
|
|
|
|
#define PDB_STATE_DISCOVERY 0
|
|
#define PDB_STATE_WDISC_ACK 1
|
|
#define PDB_STATE_PLOGI 2
|
|
#define PDB_STATE_PLOGI_ACK 3
|
|
#define PDB_STATE_PRLI 4
|
|
#define PDB_STATE_PRLI_ACK 5
|
|
#define PDB_STATE_LOGGED_IN 6
|
|
#define PDB_STATE_PORT_UNAVAIL 7
|
|
#define PDB_STATE_PRLO 8
|
|
#define PDB_STATE_PRLO_ACK 9
|
|
#define PDB_STATE_PLOGO 10
|
|
#define PDB_STATE_PLOG_ACK 11
|
|
|
|
#define SVC3_ROLE_MASK 0x30
|
|
#define SVC3_ROLE_SHIFT 4
|
|
|
|
#define BITS2WORD(x) ((x)[0] << 16 | (x)[3] << 8 | (x)[2])
|
|
#define BITS2WORD_24XX(x) ((x)[0] << 16 | (x)[1] << 8 | (x)[2])
|
|
|
|
/*
|
|
* Port Data Base Element- 24XX cards
|
|
*/
|
|
typedef struct {
|
|
uint16_t pdb_flags;
|
|
uint8_t pdb_curstate;
|
|
uint8_t pdb_laststate;
|
|
uint8_t pdb_hardaddr_bits[4];
|
|
uint8_t pdb_portid_bits[4];
|
|
#define pdb_nxt_seqid_2400 pdb_portid_bits[3]
|
|
uint16_t pdb_retry_timer;
|
|
uint16_t pdb_handle;
|
|
uint16_t pdb_rcv_dsize;
|
|
uint16_t pdb_reserved0;
|
|
uint16_t pdb_prli_svc0;
|
|
uint16_t pdb_prli_svc3;
|
|
uint8_t pdb_portname[8];
|
|
uint8_t pdb_nodename[8];
|
|
uint8_t pdb_reserved1[24];
|
|
} isp_pdb_24xx_t;
|
|
|
|
#define PDB2400_TID_SUPPORTED 0x4000
|
|
#define PDB2400_FC_TAPE 0x0080
|
|
#define PDB2400_CLASS2_ACK0 0x0040
|
|
#define PDB2400_FCP_CONF 0x0020
|
|
#define PDB2400_CLASS2 0x0010
|
|
#define PDB2400_ADDR_VALID 0x0002
|
|
|
|
#define PDB2400_STATE_PLOGI_PEND 0x03
|
|
#define PDB2400_STATE_PLOGI_DONE 0x04
|
|
#define PDB2400_STATE_PRLI_PEND 0x05
|
|
#define PDB2400_STATE_LOGGED_IN 0x06
|
|
#define PDB2400_STATE_PORT_UNAVAIL 0x07
|
|
#define PDB2400_STATE_PRLO_PEND 0x09
|
|
#define PDB2400_STATE_LOGO_PEND 0x0B
|
|
|
|
/*
|
|
* Common elements from the above two structures that are actually useful to us.
|
|
*/
|
|
typedef struct {
|
|
uint16_t handle;
|
|
uint16_t prli_word3;
|
|
uint32_t : 8,
|
|
portid : 24;
|
|
uint8_t portname[8];
|
|
uint8_t nodename[8];
|
|
} isp_pdb_t;
|
|
|
|
/*
|
|
* Port Database Changed Async Event information for 24XX cards
|
|
*/
|
|
#define PDB24XX_AE_OK 0x00
|
|
#define PDB24XX_AE_IMPL_LOGO_1 0x01
|
|
#define PDB24XX_AE_IMPL_LOGO_2 0x02
|
|
#define PDB24XX_AE_IMPL_LOGO_3 0x03
|
|
#define PDB24XX_AE_PLOGI_RCVD 0x04
|
|
#define PDB24XX_AE_PLOGI_RJT 0x05
|
|
#define PDB24XX_AE_PRLI_RCVD 0x06
|
|
#define PDB24XX_AE_PRLI_RJT 0x07
|
|
#define PDB24XX_AE_TPRLO 0x08
|
|
#define PDB24XX_AE_TPRLO_RJT 0x09
|
|
#define PDB24XX_AE_PRLO_RCVD 0x0a
|
|
#define PDB24XX_AE_LOGO_RCVD 0x0b
|
|
#define PDB24XX_AE_TOPO_CHG 0x0c
|
|
#define PDB24XX_AE_NPORT_CHG 0x0d
|
|
#define PDB24XX_AE_FLOGI_RJT 0x0e
|
|
#define PDB24XX_AE_BAD_FANN 0x0f
|
|
#define PDB24XX_AE_FLOGI_TIMO 0x10
|
|
#define PDB24XX_AE_ABX_LOGO 0x11
|
|
#define PDB24XX_AE_PLOGI_DONE 0x12
|
|
#define PDB24XX_AE_PRLI_DONJE 0x13
|
|
#define PDB24XX_AE_OPN_1 0x14
|
|
#define PDB24XX_AE_OPN_2 0x15
|
|
#define PDB24XX_AE_TXERR 0x16
|
|
#define PDB24XX_AE_FORCED_LOGO 0x17
|
|
#define PDB24XX_AE_DISC_TIMO 0x18
|
|
|
|
/*
|
|
* Genericized Port Login/Logout software structure
|
|
*/
|
|
typedef struct {
|
|
uint16_t handle;
|
|
uint16_t channel;
|
|
uint32_t
|
|
flags : 8,
|
|
portid : 24;
|
|
} isp_plcmd_t;
|
|
/* the flags to use are those for PLOGX_FLG_* below */
|
|
|
|
/*
|
|
* ISP24XX- Login/Logout Port IOCB
|
|
*/
|
|
typedef struct {
|
|
isphdr_t plogx_header;
|
|
uint32_t plogx_handle;
|
|
uint16_t plogx_status;
|
|
uint16_t plogx_nphdl;
|
|
uint16_t plogx_flags;
|
|
uint16_t plogx_vphdl; /* low 8 bits */
|
|
uint16_t plogx_portlo; /* low 16 bits */
|
|
uint16_t plogx_rspsz_porthi;
|
|
struct {
|
|
uint16_t lo16;
|
|
uint16_t hi16;
|
|
} plogx_ioparm[11];
|
|
} isp_plogx_t;
|
|
|
|
#define PLOGX_STATUS_OK 0x00
|
|
#define PLOGX_STATUS_UNAVAIL 0x28
|
|
#define PLOGX_STATUS_LOGOUT 0x29
|
|
#define PLOGX_STATUS_IOCBERR 0x31
|
|
|
|
#define PLOGX_IOCBERR_NOLINK 0x01
|
|
#define PLOGX_IOCBERR_NOIOCB 0x02
|
|
#define PLOGX_IOCBERR_NOXGHG 0x03
|
|
#define PLOGX_IOCBERR_FAILED 0x04 /* further info in IOPARM 1 */
|
|
#define PLOGX_IOCBERR_NOFABRIC 0x05
|
|
#define PLOGX_IOCBERR_NOTREADY 0x07
|
|
#define PLOGX_IOCBERR_NOLOGIN 0x08 /* further info in IOPARM 1 */
|
|
#define PLOGX_IOCBERR_NOPCB 0x0a
|
|
#define PLOGX_IOCBERR_REJECT 0x18 /* further info in IOPARM 1 */
|
|
#define PLOGX_IOCBERR_EINVAL 0x19 /* further info in IOPARM 1 */
|
|
#define PLOGX_IOCBERR_PORTUSED 0x1a /* further info in IOPARM 1 */
|
|
#define PLOGX_IOCBERR_HNDLUSED 0x1b /* further info in IOPARM 1 */
|
|
#define PLOGX_IOCBERR_NOHANDLE 0x1c
|
|
#define PLOGX_IOCBERR_NOFLOGI 0x1f /* further info in IOPARM 1 */
|
|
|
|
#define PLOGX_FLG_CMD_MASK 0xf
|
|
#define PLOGX_FLG_CMD_PLOGI 0
|
|
#define PLOGX_FLG_CMD_PRLI 1
|
|
#define PLOGX_FLG_CMD_PDISC 2
|
|
#define PLOGX_FLG_CMD_LOGO 8
|
|
#define PLOGX_FLG_CMD_PRLO 9
|
|
#define PLOGX_FLG_CMD_TPRLO 10
|
|
|
|
#define PLOGX_FLG_COND_PLOGI 0x10 /* if with PLOGI */
|
|
#define PLOGX_FLG_IMPLICIT 0x10 /* if with LOGO, PRLO, TPRLO */
|
|
#define PLOGX_FLG_SKIP_PRLI 0x20 /* if with PLOGI */
|
|
#define PLOGX_FLG_IMPLICIT_LOGO_ALL 0x20 /* if with LOGO */
|
|
#define PLOGX_FLG_EXPLICIT_LOGO 0x40 /* if with LOGO */
|
|
#define PLOGX_FLG_COMMON_FEATURES 0x80 /* if with PLOGI */
|
|
#define PLOGX_FLG_FREE_NPHDL 0x80 /* if with with LOGO */
|
|
|
|
#define PLOGX_FLG_CLASS2 0x100 /* if with PLOGI */
|
|
#define PLOGX_FLG_FCP2_OVERRIDE 0x200 /* if with PRLOG, PRLI */
|
|
|
|
/*
|
|
* Report ID Acquisistion (24XX multi-id firmware)
|
|
*/
|
|
typedef struct {
|
|
isphdr_t ridacq_hdr;
|
|
uint32_t ridacq_handle;
|
|
union {
|
|
struct {
|
|
uint8_t ridacq_vp_acquired;
|
|
uint8_t ridacq_vp_setup;
|
|
uint16_t ridacq_reserved0;
|
|
} type0; /* type 0 */
|
|
struct {
|
|
uint16_t ridacq_vp_count;
|
|
uint8_t ridacq_vp_index;
|
|
uint8_t ridacq_vp_status;
|
|
} type1; /* type 1 */
|
|
} un;
|
|
uint16_t ridacq_vp_port_lo;
|
|
uint8_t ridacq_vp_port_hi;
|
|
uint8_t ridacq_format; /* 0 or 1 */
|
|
uint16_t ridacq_map[8];
|
|
uint8_t ridacq_reserved1[32];
|
|
} isp_ridacq_t;
|
|
|
|
#define RIDACQ_STS_COMPLETE 0
|
|
#define RIDACQ_STS_UNACQUIRED 1
|
|
#define RIDACQ_STS_CHANGED 20
|
|
|
|
|
|
/*
|
|
* Simple Name Server Data Structures
|
|
*/
|
|
#define SNS_GA_NXT 0x100
|
|
#define SNS_GPN_ID 0x112
|
|
#define SNS_GNN_ID 0x113
|
|
#define SNS_GFF_ID 0x11F
|
|
#define SNS_GID_FT 0x171
|
|
#define SNS_RFT_ID 0x217
|
|
typedef struct {
|
|
uint16_t snscb_rblen; /* response buffer length (words) */
|
|
uint16_t snscb_reserved0;
|
|
uint16_t snscb_addr[4]; /* response buffer address */
|
|
uint16_t snscb_sblen; /* subcommand buffer length (words) */
|
|
uint16_t snscb_reserved1;
|
|
uint16_t snscb_data[]; /* variable data */
|
|
} sns_screq_t; /* Subcommand Request Structure */
|
|
|
|
typedef struct {
|
|
uint16_t snscb_rblen; /* response buffer length (words) */
|
|
uint16_t snscb_reserved0;
|
|
uint16_t snscb_addr[4]; /* response buffer address */
|
|
uint16_t snscb_sblen; /* subcommand buffer length (words) */
|
|
uint16_t snscb_reserved1;
|
|
uint16_t snscb_cmd;
|
|
uint16_t snscb_reserved2;
|
|
uint32_t snscb_reserved3;
|
|
uint32_t snscb_port;
|
|
} sns_ga_nxt_req_t;
|
|
#define SNS_GA_NXT_REQ_SIZE (sizeof (sns_ga_nxt_req_t))
|
|
|
|
typedef struct {
|
|
uint16_t snscb_rblen; /* response buffer length (words) */
|
|
uint16_t snscb_reserved0;
|
|
uint16_t snscb_addr[4]; /* response buffer address */
|
|
uint16_t snscb_sblen; /* subcommand buffer length (words) */
|
|
uint16_t snscb_reserved1;
|
|
uint16_t snscb_cmd;
|
|
uint16_t snscb_reserved2;
|
|
uint32_t snscb_reserved3;
|
|
uint32_t snscb_portid;
|
|
} sns_gxn_id_req_t;
|
|
#define SNS_GXN_ID_REQ_SIZE (sizeof (sns_gxn_id_req_t))
|
|
|
|
typedef struct {
|
|
uint16_t snscb_rblen; /* response buffer length (words) */
|
|
uint16_t snscb_reserved0;
|
|
uint16_t snscb_addr[4]; /* response buffer address */
|
|
uint16_t snscb_sblen; /* subcommand buffer length (words) */
|
|
uint16_t snscb_reserved1;
|
|
uint16_t snscb_cmd;
|
|
uint16_t snscb_mword_div_2;
|
|
uint32_t snscb_reserved3;
|
|
uint32_t snscb_fc4_type;
|
|
} sns_gid_ft_req_t;
|
|
#define SNS_GID_FT_REQ_SIZE (sizeof (sns_gid_ft_req_t))
|
|
|
|
typedef struct {
|
|
uint16_t snscb_rblen; /* response buffer length (words) */
|
|
uint16_t snscb_reserved0;
|
|
uint16_t snscb_addr[4]; /* response buffer address */
|
|
uint16_t snscb_sblen; /* subcommand buffer length (words) */
|
|
uint16_t snscb_reserved1;
|
|
uint16_t snscb_cmd;
|
|
uint16_t snscb_reserved2;
|
|
uint32_t snscb_reserved3;
|
|
uint32_t snscb_port;
|
|
uint32_t snscb_fc4_types[8];
|
|
} sns_rft_id_req_t;
|
|
#define SNS_RFT_ID_REQ_SIZE (sizeof (sns_rft_id_req_t))
|
|
|
|
typedef struct {
|
|
ct_hdr_t snscb_cthdr;
|
|
uint8_t snscb_port_type;
|
|
uint8_t snscb_port_id[3];
|
|
uint8_t snscb_portname[8];
|
|
uint16_t snscb_data[]; /* variable data */
|
|
} sns_scrsp_t; /* Subcommand Response Structure */
|
|
|
|
typedef struct {
|
|
ct_hdr_t snscb_cthdr;
|
|
uint8_t snscb_port_type;
|
|
uint8_t snscb_port_id[3];
|
|
uint8_t snscb_portname[8];
|
|
uint8_t snscb_pnlen; /* symbolic port name length */
|
|
uint8_t snscb_pname[255]; /* symbolic port name */
|
|
uint8_t snscb_nodename[8];
|
|
uint8_t snscb_nnlen; /* symbolic node name length */
|
|
uint8_t snscb_nname[255]; /* symbolic node name */
|
|
uint8_t snscb_ipassoc[8];
|
|
uint8_t snscb_ipaddr[16];
|
|
uint8_t snscb_svc_class[4];
|
|
uint8_t snscb_fc4_types[32];
|
|
uint8_t snscb_fpname[8];
|
|
uint8_t snscb_reserved;
|
|
uint8_t snscb_hardaddr[3];
|
|
} sns_ga_nxt_rsp_t; /* Subcommand Response Structure */
|
|
#define SNS_GA_NXT_RESP_SIZE (sizeof (sns_ga_nxt_rsp_t))
|
|
|
|
typedef struct {
|
|
ct_hdr_t snscb_cthdr;
|
|
uint8_t snscb_wwn[8];
|
|
} sns_gxn_id_rsp_t;
|
|
#define SNS_GXN_ID_RESP_SIZE (sizeof (sns_gxn_id_rsp_t))
|
|
|
|
typedef struct {
|
|
ct_hdr_t snscb_cthdr;
|
|
uint32_t snscb_fc4_features[32];
|
|
} sns_gff_id_rsp_t;
|
|
#define SNS_GFF_ID_RESP_SIZE (sizeof (sns_gff_id_rsp_t))
|
|
|
|
typedef struct {
|
|
ct_hdr_t snscb_cthdr;
|
|
struct {
|
|
uint8_t control;
|
|
uint8_t portid[3];
|
|
} snscb_ports[1];
|
|
} sns_gid_ft_rsp_t;
|
|
#define SNS_GID_FT_RESP_SIZE(x) ((sizeof (sns_gid_ft_rsp_t)) + ((x - 1) << 2))
|
|
#define SNS_RFT_ID_RESP_SIZE (sizeof (ct_hdr_t))
|
|
|
|
/*
|
|
* Other Misc Structures
|
|
*/
|
|
|
|
/* ELS Pass Through */
|
|
typedef struct {
|
|
isphdr_t els_hdr;
|
|
uint32_t els_handle;
|
|
uint16_t els_status;
|
|
uint16_t els_nphdl;
|
|
uint16_t els_xmit_dsd_count; /* outgoing only */
|
|
uint8_t els_vphdl;
|
|
uint8_t els_sof;
|
|
uint32_t els_rxid;
|
|
uint16_t els_recv_dsd_count; /* outgoing only */
|
|
uint8_t els_opcode;
|
|
uint8_t els_reserved1;
|
|
uint8_t els_did_lo;
|
|
uint8_t els_did_mid;
|
|
uint8_t els_did_hi;
|
|
uint8_t els_reserved2;
|
|
uint16_t els_reserved3;
|
|
uint16_t els_ctl_flags;
|
|
union {
|
|
struct {
|
|
uint32_t _els_bytecnt;
|
|
uint32_t _els_subcode1;
|
|
uint32_t _els_subcode2;
|
|
uint8_t _els_reserved4[20];
|
|
} in;
|
|
struct {
|
|
uint32_t _els_recv_bytecnt;
|
|
uint32_t _els_xmit_bytecnt;
|
|
uint32_t _els_xmit_dsd_length;
|
|
uint16_t _els_xmit_dsd_a1500;
|
|
uint16_t _els_xmit_dsd_a3116;
|
|
uint16_t _els_xmit_dsd_a4732;
|
|
uint16_t _els_xmit_dsd_a6348;
|
|
uint32_t _els_recv_dsd_length;
|
|
uint16_t _els_recv_dsd_a1500;
|
|
uint16_t _els_recv_dsd_a3116;
|
|
uint16_t _els_recv_dsd_a4732;
|
|
uint16_t _els_recv_dsd_a6348;
|
|
} out;
|
|
} inout;
|
|
#define els_bytecnt inout.in._els_bytecnt
|
|
#define els_subcode1 inout.in._els_subcode1
|
|
#define els_subcode2 inout.in._els_subcode2
|
|
#define els_reserved4 inout.in._els_reserved4
|
|
#define els_recv_bytecnt inout.out._els_recv_bytecnt
|
|
#define els_xmit_bytecnt inout.out._els_xmit_bytecnt
|
|
#define els_xmit_dsd_length inout.out._els_xmit_dsd_length
|
|
#define els_xmit_dsd_a1500 inout.out._els_xmit_dsd_a1500
|
|
#define els_xmit_dsd_a3116 inout.out._els_xmit_dsd_a3116
|
|
#define els_xmit_dsd_a4732 inout.out._els_xmit_dsd_a4732
|
|
#define els_xmit_dsd_a6348 inout.out._els_xmit_dsd_a6348
|
|
#define els_recv_dsd_length inout.out._els_recv_dsd_length
|
|
#define els_recv_dsd_a1500 inout.out._els_recv_dsd_a1500
|
|
#define els_recv_dsd_a3116 inout.out._els_recv_dsd_a3116
|
|
#define els_recv_dsd_a4732 inout.out._els_recv_dsd_a4732
|
|
#define els_recv_dsd_a6348 inout.out._els_recv_dsd_a6348
|
|
} els_t;
|
|
|
|
/*
|
|
* A handy package structure for running FC-SCSI commands internally
|
|
*/
|
|
typedef struct {
|
|
uint16_t handle;
|
|
uint16_t lun;
|
|
uint32_t
|
|
channel : 8,
|
|
portid : 24;
|
|
uint32_t timeout;
|
|
union {
|
|
struct {
|
|
uint32_t data_length;
|
|
uint32_t
|
|
no_wait : 1,
|
|
do_read : 1;
|
|
uint8_t cdb[16];
|
|
void *data_ptr;
|
|
} beg;
|
|
struct {
|
|
uint32_t data_residual;
|
|
uint8_t status;
|
|
uint8_t pad;
|
|
uint16_t sense_length;
|
|
uint8_t sense_data[32];
|
|
} end;
|
|
} fcd;
|
|
} isp_xcmd_t;
|
|
|
|
/*
|
|
* Target Mode related definitions
|
|
*/
|
|
#define QLTM_SENSELEN 18 /* non-FC cards only */
|
|
#define QLTM_SVALID 0x80
|
|
|
|
/*
|
|
* Structure for Enable Lun and Modify Lun queue entries
|
|
*/
|
|
typedef struct {
|
|
isphdr_t le_header;
|
|
uint32_t le_reserved;
|
|
uint8_t le_lun;
|
|
uint8_t le_rsvd;
|
|
uint8_t le_ops; /* Modify LUN only */
|
|
uint8_t le_tgt; /* Not for FC */
|
|
uint32_t le_flags; /* Not for FC */
|
|
uint8_t le_status;
|
|
uint8_t le_reserved2;
|
|
uint8_t le_cmd_count;
|
|
uint8_t le_in_count;
|
|
uint8_t le_cdb6len; /* Not for FC */
|
|
uint8_t le_cdb7len; /* Not for FC */
|
|
uint16_t le_timeout;
|
|
uint16_t le_reserved3[20];
|
|
} lun_entry_t;
|
|
|
|
/*
|
|
* le_flags values
|
|
*/
|
|
#define LUN_TQAE 0x00000002 /* bit1 Tagged Queue Action Enable */
|
|
#define LUN_DSSM 0x01000000 /* bit24 Disable Sending SDP Message */
|
|
#define LUN_DISAD 0x02000000 /* bit25 Disable autodisconnect */
|
|
#define LUN_DM 0x40000000 /* bit30 Disconnects Mandatory */
|
|
|
|
/*
|
|
* le_ops values
|
|
*/
|
|
#define LUN_CCINCR 0x01 /* increment command count */
|
|
#define LUN_CCDECR 0x02 /* decrement command count */
|
|
#define LUN_ININCR 0x40 /* increment immed. notify count */
|
|
#define LUN_INDECR 0x80 /* decrement immed. notify count */
|
|
|
|
/*
|
|
* le_status values
|
|
*/
|
|
#define LUN_OK 0x01 /* we be rockin' */
|
|
#define LUN_ERR 0x04 /* request completed with error */
|
|
#define LUN_INVAL 0x06 /* invalid request */
|
|
#define LUN_NOCAP 0x16 /* can't provide requested capability */
|
|
#define LUN_ENABLED 0x3E /* LUN already enabled */
|
|
|
|
/*
|
|
* Immediate Notify Entry structure
|
|
*/
|
|
#define IN_MSGLEN 8 /* 8 bytes */
|
|
#define IN_RSVDLEN 8 /* 8 words */
|
|
typedef struct {
|
|
isphdr_t in_header;
|
|
uint32_t in_reserved;
|
|
uint8_t in_lun; /* lun */
|
|
uint8_t in_iid; /* initiator */
|
|
uint8_t in_reserved2;
|
|
uint8_t in_tgt; /* target */
|
|
uint32_t in_flags;
|
|
uint8_t in_status;
|
|
uint8_t in_rsvd2;
|
|
uint8_t in_tag_val; /* tag value */
|
|
uint8_t in_tag_type; /* tag type */
|
|
uint16_t in_seqid; /* sequence id */
|
|
uint8_t in_msg[IN_MSGLEN]; /* SCSI message bytes */
|
|
uint16_t in_reserved3[IN_RSVDLEN];
|
|
uint8_t in_sense[QLTM_SENSELEN];/* suggested sense data */
|
|
} in_entry_t;
|
|
|
|
typedef struct {
|
|
isphdr_t in_header;
|
|
uint32_t in_reserved;
|
|
uint8_t in_lun; /* lun */
|
|
uint8_t in_iid; /* initiator */
|
|
uint16_t in_scclun;
|
|
uint32_t in_reserved2;
|
|
uint16_t in_status;
|
|
uint16_t in_task_flags;
|
|
uint16_t in_seqid; /* sequence id */
|
|
} in_fcentry_t;
|
|
|
|
typedef struct {
|
|
isphdr_t in_header;
|
|
uint32_t in_reserved;
|
|
uint16_t in_iid; /* initiator */
|
|
uint16_t in_scclun;
|
|
uint32_t in_reserved2;
|
|
uint16_t in_status;
|
|
uint16_t in_task_flags;
|
|
uint16_t in_seqid; /* sequence id */
|
|
} in_fcentry_e_t;
|
|
|
|
/*
|
|
* Values for the in_status field
|
|
*/
|
|
#define IN_REJECT 0x0D /* Message Reject message received */
|
|
#define IN_RESET 0x0E /* Bus Reset occurred */
|
|
#define IN_NO_RCAP 0x16 /* requested capability not available */
|
|
#define IN_IDE_RECEIVED 0x33 /* Initiator Detected Error msg received */
|
|
#define IN_RSRC_UNAVAIL 0x34 /* resource unavailable */
|
|
#define IN_MSG_RECEIVED 0x36 /* SCSI message received */
|
|
#define IN_ABORT_TASK 0x20 /* task named in RX_ID is being aborted (FC) */
|
|
#define IN_PORT_LOGOUT 0x29 /* port has logged out (FC) */
|
|
#define IN_PORT_CHANGED 0x2A /* port changed */
|
|
#define IN_GLOBAL_LOGO 0x2E /* all ports logged out */
|
|
#define IN_NO_NEXUS 0x3B /* Nexus not established */
|
|
#define IN_SRR_RCVD 0x45 /* SRR received */
|
|
|
|
/*
|
|
* Values for the in_task_flags field- should only get one at a time!
|
|
*/
|
|
#define TASK_FLAGS_RESERVED_MASK (0xe700)
|
|
#define TASK_FLAGS_CLEAR_ACA (1<<14)
|
|
#define TASK_FLAGS_TARGET_RESET (1<<13)
|
|
#define TASK_FLAGS_LUN_RESET (1<<12)
|
|
#define TASK_FLAGS_CLEAR_TASK_SET (1<<10)
|
|
#define TASK_FLAGS_ABORT_TASK_SET (1<<9)
|
|
|
|
/*
|
|
* ISP24XX Immediate Notify
|
|
*/
|
|
typedef struct {
|
|
isphdr_t in_header;
|
|
uint32_t in_reserved;
|
|
uint16_t in_nphdl;
|
|
uint16_t in_reserved1;
|
|
uint16_t in_flags;
|
|
uint16_t in_srr_rxid;
|
|
uint16_t in_status;
|
|
uint8_t in_status_subcode;
|
|
uint8_t in_reserved2;
|
|
uint32_t in_rxid;
|
|
uint16_t in_srr_reloff_lo;
|
|
uint16_t in_srr_reloff_hi;
|
|
uint16_t in_srr_iu;
|
|
uint16_t in_srr_oxid;
|
|
/*
|
|
* If bit 2 is set in in_flags, the N-Port and
|
|
* handle tags are valid. If the received ELS is
|
|
* a LOGO, then these tags contain the N Port ID
|
|
* from the LOGO payload. If the received ELS
|
|
* request is TPRLO, these tags contain the
|
|
* Third Party Originator N Port ID.
|
|
*/
|
|
uint16_t in_nport_id_hi;
|
|
#define in_prli_options in_nport_id_hi
|
|
uint8_t in_nport_id_lo;
|
|
uint8_t in_reserved3;
|
|
uint16_t in_np_handle;
|
|
uint8_t in_reserved4[12];
|
|
uint8_t in_reserved5;
|
|
uint8_t in_vpidx;
|
|
uint32_t in_reserved6;
|
|
uint16_t in_portid_lo;
|
|
uint8_t in_portid_hi;
|
|
uint8_t in_reserved7;
|
|
uint16_t in_reserved8;
|
|
uint16_t in_oxid;
|
|
} in_fcentry_24xx_t;
|
|
|
|
#define IN24XX_FLAG_PUREX_IOCB 0x1
|
|
#define IN24XX_FLAG_GLOBAL_LOGOUT 0x2
|
|
#define IN24XX_FLAG_NPHDL_VALID 0x4
|
|
|
|
#define IN24XX_LIP_RESET 0x0E
|
|
#define IN24XX_LINK_RESET 0x0F
|
|
#define IN24XX_PORT_LOGOUT 0x29
|
|
#define IN24XX_PORT_CHANGED 0x2A
|
|
#define IN24XX_LINK_FAILED 0x2E
|
|
#define IN24XX_SRR_RCVD 0x45
|
|
#define IN24XX_ELS_RCVD 0x46 /*
|
|
* login-affectin ELS received- check
|
|
* subcode for specific opcode
|
|
*/
|
|
|
|
/*
|
|
* For f/w > 4.0.25, these offsets in the Immediate Notify contain
|
|
* the WWNN/WWPN if the ELS is PLOGI, PDISC or ADISC. The WWN is in
|
|
* Big Endian format.
|
|
*/
|
|
#define IN24XX_PLOGI_WWNN_OFF 0x20
|
|
#define IN24XX_PLOGI_WWPN_OFF 0x28
|
|
|
|
/*
|
|
* For f/w > 4.0.25, this offset in the Immediate Notify contain
|
|
* the WWPN if the ELS is LOGO. The WWN is in Big Endian format.
|
|
*/
|
|
#define IN24XX_LOGO_WWPN_OFF 0x28
|
|
|
|
/*
|
|
* Immediate Notify Status Subcodes for IN24XX_PORT_LOGOUT
|
|
*/
|
|
#define IN24XX_PORT_LOGOUT_PDISC_TMO 0x00
|
|
#define IN24XX_PORT_LOGOUT_UXPR_DISC 0x01
|
|
#define IN24XX_PORT_LOGOUT_OWN_OPN 0x02
|
|
#define IN24XX_PORT_LOGOUT_OWN_OPN_SFT 0x03
|
|
#define IN24XX_PORT_LOGOUT_ABTS_TMO 0x04
|
|
#define IN24XX_PORT_LOGOUT_DISC_RJT 0x05
|
|
#define IN24XX_PORT_LOGOUT_LOGIN_NEEDED 0x06
|
|
#define IN24XX_PORT_LOGOUT_BAD_DISC 0x07
|
|
#define IN24XX_PORT_LOGOUT_LOST_ALPA 0x08
|
|
#define IN24XX_PORT_LOGOUT_XMIT_FAILURE 0x09
|
|
|
|
/*
|
|
* Immediate Notify Status Subcodes for IN24XX_PORT_CHANGED
|
|
*/
|
|
#define IN24XX_PORT_CHANGED_BADFAN 0x00
|
|
#define IN24XX_PORT_CHANGED_TOPO_CHANGE 0x01
|
|
#define IN24XX_PORT_CHANGED_FLOGI_ACC 0x02
|
|
#define IN24XX_PORT_CHANGED_FLOGI_RJT 0x03
|
|
#define IN24XX_PORT_CHANGED_TIMEOUT 0x04
|
|
#define IN24XX_PORT_CHANGED_PORT_CHANGE 0x05
|
|
|
|
/*
|
|
* Notify Acknowledge Entry structure
|
|
*/
|
|
#define NA_RSVDLEN 22
|
|
typedef struct {
|
|
isphdr_t na_header;
|
|
uint32_t na_reserved;
|
|
uint8_t na_lun; /* lun */
|
|
uint8_t na_iid; /* initiator */
|
|
uint8_t na_reserved2;
|
|
uint8_t na_tgt; /* target */
|
|
uint32_t na_flags;
|
|
uint8_t na_status;
|
|
uint8_t na_event;
|
|
uint16_t na_seqid; /* sequence id */
|
|
uint16_t na_reserved3[NA_RSVDLEN];
|
|
} na_entry_t;
|
|
|
|
/*
|
|
* Value for the na_event field
|
|
*/
|
|
#define NA_RST_CLRD 0x80 /* Clear an async event notification */
|
|
#define NA_OK 0x01 /* Notify Acknowledge Succeeded */
|
|
#define NA_INVALID 0x06 /* Invalid Notify Acknowledge */
|
|
|
|
#define NA2_RSVDLEN 21
|
|
typedef struct {
|
|
isphdr_t na_header;
|
|
uint32_t na_reserved;
|
|
uint8_t na_reserved1;
|
|
uint8_t na_iid; /* initiator loop id */
|
|
uint16_t na_response;
|
|
uint16_t na_flags;
|
|
uint16_t na_reserved2;
|
|
uint16_t na_status;
|
|
uint16_t na_task_flags;
|
|
uint16_t na_seqid; /* sequence id */
|
|
uint16_t na_reserved3[NA2_RSVDLEN];
|
|
} na_fcentry_t;
|
|
|
|
typedef struct {
|
|
isphdr_t na_header;
|
|
uint32_t na_reserved;
|
|
uint16_t na_iid; /* initiator loop id */
|
|
uint16_t na_response; /* response code */
|
|
uint16_t na_flags;
|
|
uint16_t na_reserved2;
|
|
uint16_t na_status;
|
|
uint16_t na_task_flags;
|
|
uint16_t na_seqid; /* sequence id */
|
|
uint16_t na_reserved3[NA2_RSVDLEN];
|
|
} na_fcentry_e_t;
|
|
|
|
#define NAFC_RCOUNT 0x80 /* increment resource count */
|
|
#define NAFC_RST_CLRD 0x20 /* Clear LIP Reset */
|
|
#define NAFC_TVALID 0x10 /* task mangement response code is valid */
|
|
|
|
/*
|
|
* ISP24XX Notify Acknowledge
|
|
*/
|
|
|
|
typedef struct {
|
|
isphdr_t na_header;
|
|
uint32_t na_handle;
|
|
uint16_t na_nphdl;
|
|
uint16_t na_reserved1;
|
|
uint16_t na_flags;
|
|
uint16_t na_srr_rxid;
|
|
uint16_t na_status;
|
|
uint8_t na_status_subcode;
|
|
uint8_t na_reserved2;
|
|
uint32_t na_rxid;
|
|
uint16_t na_srr_reloff_lo;
|
|
uint16_t na_srr_reloff_hi;
|
|
uint16_t na_srr_iu;
|
|
uint16_t na_srr_flags;
|
|
uint8_t na_reserved3[18];
|
|
uint8_t na_reserved4;
|
|
uint8_t na_vpidx;
|
|
uint8_t na_srr_reject_vunique;
|
|
uint8_t na_srr_reject_explanation;
|
|
uint8_t na_srr_reject_code;
|
|
uint8_t na_reserved5;
|
|
uint8_t na_reserved6[6];
|
|
uint16_t na_oxid;
|
|
} na_fcentry_24xx_t;
|
|
|
|
/*
|
|
* Accept Target I/O Entry structure
|
|
*/
|
|
#define ATIO_CDBLEN 26
|
|
|
|
typedef struct {
|
|
isphdr_t at_header;
|
|
uint16_t at_reserved;
|
|
uint16_t at_handle;
|
|
uint8_t at_lun; /* lun */
|
|
uint8_t at_iid; /* initiator */
|
|
uint8_t at_cdblen; /* cdb length */
|
|
uint8_t at_tgt; /* target */
|
|
uint32_t at_flags;
|
|
uint8_t at_status; /* firmware status */
|
|
uint8_t at_scsi_status; /* scsi status */
|
|
uint8_t at_tag_val; /* tag value */
|
|
uint8_t at_tag_type; /* tag type */
|
|
uint8_t at_cdb[ATIO_CDBLEN]; /* received CDB */
|
|
uint8_t at_sense[QLTM_SENSELEN];/* suggested sense data */
|
|
} at_entry_t;
|
|
|
|
/*
|
|
* at_flags values
|
|
*/
|
|
#define AT_NODISC 0x00008000 /* disconnect disabled */
|
|
#define AT_TQAE 0x00000002 /* Tagged Queue Action enabled */
|
|
|
|
/*
|
|
* at_status values
|
|
*/
|
|
#define AT_PATH_INVALID 0x07 /* ATIO sent to firmware for disabled lun */
|
|
#define AT_RESET 0x0E /* SCSI Bus Reset Occurred */
|
|
#define AT_PHASE_ERROR 0x14 /* Bus phase sequence error */
|
|
#define AT_NOCAP 0x16 /* Requested capability not available */
|
|
#define AT_BDR_MSG 0x17 /* Bus Device Reset msg received */
|
|
#define AT_CDB 0x3D /* CDB received */
|
|
/*
|
|
* Macros to create and fetch and test concatenated handle and tag value macros
|
|
* (SPI only)
|
|
*/
|
|
#define AT_MAKE_TAGID(tid, aep) \
|
|
tid = aep->at_handle; \
|
|
if (aep->at_flags & AT_TQAE) { \
|
|
tid |= (aep->at_tag_val << 16); \
|
|
tid |= (1 << 24); \
|
|
}
|
|
|
|
#define CT_MAKE_TAGID(tid, ct) \
|
|
tid = ct->ct_fwhandle; \
|
|
if (ct->ct_flags & CT_TQAE) { \
|
|
tid |= (ct->ct_tag_val << 16); \
|
|
tid |= (1 << 24); \
|
|
}
|
|
|
|
#define AT_HAS_TAG(val) ((val) & (1 << 24))
|
|
#define AT_GET_TAG(val) (((val) >> 16) & 0xff)
|
|
#define AT_GET_HANDLE(val) ((val) & 0xffff)
|
|
|
|
#define IN_MAKE_TAGID(tid, inp) \
|
|
tid = inp->in_seqid; \
|
|
tid |= (inp->in_tag_val << 16); \
|
|
tid |= (1 << 24)
|
|
|
|
/*
|
|
* Accept Target I/O Entry structure, Type 2
|
|
*/
|
|
#define ATIO2_CDBLEN 16
|
|
|
|
typedef struct {
|
|
isphdr_t at_header;
|
|
uint32_t at_reserved;
|
|
uint8_t at_lun; /* lun or reserved */
|
|
uint8_t at_iid; /* initiator */
|
|
uint16_t at_rxid; /* response ID */
|
|
uint16_t at_flags;
|
|
uint16_t at_status; /* firmware status */
|
|
uint8_t at_crn; /* command reference number */
|
|
uint8_t at_taskcodes;
|
|
uint8_t at_taskflags;
|
|
uint8_t at_execodes;
|
|
uint8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */
|
|
uint32_t at_datalen; /* allocated data len */
|
|
uint16_t at_scclun; /* SCC Lun or reserved */
|
|
uint16_t at_wwpn[4]; /* WWPN of initiator */
|
|
uint16_t at_reserved2[6];
|
|
uint16_t at_oxid;
|
|
} at2_entry_t;
|
|
|
|
typedef struct {
|
|
isphdr_t at_header;
|
|
uint32_t at_reserved;
|
|
uint16_t at_iid; /* initiator */
|
|
uint16_t at_rxid; /* response ID */
|
|
uint16_t at_flags;
|
|
uint16_t at_status; /* firmware status */
|
|
uint8_t at_crn; /* command reference number */
|
|
uint8_t at_taskcodes;
|
|
uint8_t at_taskflags;
|
|
uint8_t at_execodes;
|
|
uint8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */
|
|
uint32_t at_datalen; /* allocated data len */
|
|
uint16_t at_scclun; /* SCC Lun or reserved */
|
|
uint16_t at_wwpn[4]; /* WWPN of initiator */
|
|
uint16_t at_reserved2[6];
|
|
uint16_t at_oxid;
|
|
} at2e_entry_t;
|
|
|
|
#define ATIO2_WWPN_OFFSET 0x2A
|
|
#define ATIO2_OXID_OFFSET 0x3E
|
|
|
|
#define ATIO2_TC_ATTR_MASK 0x7
|
|
#define ATIO2_TC_ATTR_SIMPLEQ 0
|
|
#define ATIO2_TC_ATTR_HEADOFQ 1
|
|
#define ATIO2_TC_ATTR_ORDERED 2
|
|
#define ATIO2_TC_ATTR_ACAQ 4
|
|
#define ATIO2_TC_ATTR_UNTAGGED 5
|
|
|
|
#define ATIO2_EX_WRITE 0x1
|
|
#define ATIO2_EX_READ 0x2
|
|
/*
|
|
* Macros to create and fetch and test concatenated handle and tag value macros
|
|
*/
|
|
#define AT2_MAKE_TAGID(tid, bus, inst, aep) \
|
|
tid = aep->at_rxid; \
|
|
tid |= (((uint64_t)inst) << 32); \
|
|
tid |= (((uint64_t)bus) << 48)
|
|
|
|
#define CT2_MAKE_TAGID(tid, bus, inst, ct) \
|
|
tid = ct->ct_rxid; \
|
|
tid |= (((uint64_t)inst) << 32); \
|
|
tid |= (((uint64_t)(bus & 0xff)) << 48)
|
|
|
|
#define AT2_HAS_TAG(val) 1
|
|
#define AT2_GET_TAG(val) ((val) & 0xffffffff)
|
|
#define AT2_GET_INST(val) (((val) >> 32) & 0xffff)
|
|
#define AT2_GET_HANDLE AT2_GET_TAG
|
|
#define AT2_GET_BUS(val) (((val) >> 48) & 0xff)
|
|
|
|
#define FC_HAS_TAG AT2_HAS_TAG
|
|
#define FC_GET_TAG AT2_GET_TAG
|
|
#define FC_GET_INST AT2_GET_INST
|
|
#define FC_GET_HANDLE AT2_GET_HANDLE
|
|
|
|
#define IN_FC_MAKE_TAGID(tid, bus, inst, seqid) \
|
|
tid = seqid; \
|
|
tid |= (((uint64_t)inst) << 32); \
|
|
tid |= (((uint64_t)(bus & 0xff)) << 48)
|
|
|
|
#define FC_TAG_INSERT_INST(tid, inst) \
|
|
tid &= ~0x0000ffff00000000ull; \
|
|
tid |= (((uint64_t)inst) << 32)
|
|
|
|
/*
|
|
* 24XX ATIO Definition
|
|
*
|
|
* This is *quite* different from other entry types.
|
|
* First of all, it has its own queue it comes in on.
|
|
*
|
|
* Secondly, it doesn't have a normal header.
|
|
*
|
|
* Thirdly, it's just a passthru of the FCP CMND IU
|
|
* which is recorded in big endian mode.
|
|
*/
|
|
typedef struct {
|
|
uint8_t at_type;
|
|
uint8_t at_count;
|
|
/*
|
|
* Task attribute in high four bits,
|
|
* the rest is the FCP CMND IU Length.
|
|
* NB: the command can extend past the
|
|
* length for a single queue entry.
|
|
*/
|
|
uint16_t at_ta_len;
|
|
uint32_t at_rxid;
|
|
fc_hdr_t at_hdr;
|
|
fcp_cmnd_iu_t at_cmnd;
|
|
} at7_entry_t;
|
|
#define AT7_NORESRC_RXID 0xffffffff
|
|
|
|
|
|
/*
|
|
* Continue Target I/O Entry structure
|
|
* Request from driver. The response from the
|
|
* ISP firmware is the same except that the last 18
|
|
* bytes are overwritten by suggested sense data if
|
|
* the 'autosense valid' bit is set in the status byte.
|
|
*/
|
|
typedef struct {
|
|
isphdr_t ct_header;
|
|
uint16_t ct_syshandle;
|
|
uint16_t ct_fwhandle; /* required by f/w */
|
|
uint8_t ct_lun; /* lun */
|
|
uint8_t ct_iid; /* initiator id */
|
|
uint8_t ct_reserved2;
|
|
uint8_t ct_tgt; /* our target id */
|
|
uint32_t ct_flags;
|
|
uint8_t ct_status; /* isp status */
|
|
uint8_t ct_scsi_status; /* scsi status */
|
|
uint8_t ct_tag_val; /* tag value */
|
|
uint8_t ct_tag_type; /* tag type */
|
|
uint32_t ct_xfrlen; /* transfer length */
|
|
uint32_t ct_resid; /* residual length */
|
|
uint16_t ct_timeout;
|
|
uint16_t ct_seg_count;
|
|
ispds_t ct_dataseg[ISP_RQDSEG];
|
|
} ct_entry_t;
|
|
|
|
/*
|
|
* For some of the dual port SCSI adapters, port (bus #) is reported
|
|
* in the MSbit of ct_iid. Bit fields are a bit too awkward here.
|
|
*
|
|
* Note that this does not apply to FC adapters at all which can and
|
|
* do report IIDs between 0x81 && 0xfe (or 0x7ff) which represent devices
|
|
* that have logged in across a SCSI fabric.
|
|
*/
|
|
#define GET_IID_VAL(x) (x & 0x3f)
|
|
#define GET_BUS_VAL(x) ((x >> 7) & 0x1)
|
|
#define SET_IID_VAL(y, x) y = ((y & ~0x3f) | (x & 0x3f))
|
|
#define SET_BUS_VAL(y, x) y = ((y & 0x3f) | ((x & 0x1) << 7))
|
|
|
|
/*
|
|
* ct_flags values
|
|
*/
|
|
#define CT_TQAE 0x00000002 /* bit 1, Tagged Queue Action enable */
|
|
#define CT_DATA_IN 0x00000040 /* bits 6&7, Data direction - *to* initiator */
|
|
#define CT_DATA_OUT 0x00000080 /* bits 6&7, Data direction - *from* initiator */
|
|
#define CT_NO_DATA 0x000000C0 /* bits 6&7, Data direction */
|
|
#define CT_CCINCR 0x00000100 /* bit 8, autoincrement atio count */
|
|
#define CT_DATAMASK 0x000000C0 /* bits 6&7, Data direction */
|
|
#define CT_INISYNCWIDE 0x00004000 /* bit 14, Do Sync/Wide Negotiation */
|
|
#define CT_NODISC 0x00008000 /* bit 15, Disconnects disabled */
|
|
#define CT_DSDP 0x01000000 /* bit 24, Disable Save Data Pointers */
|
|
#define CT_SENDRDP 0x04000000 /* bit 26, Send Restore Pointers msg */
|
|
#define CT_SENDSTATUS 0x80000000 /* bit 31, Send SCSI status byte */
|
|
|
|
/*
|
|
* ct_status values
|
|
* - set by the firmware when it returns the CTIO
|
|
*/
|
|
#define CT_OK 0x01 /* completed without error */
|
|
#define CT_ABORTED 0x02 /* aborted by host */
|
|
#define CT_ERR 0x04 /* see sense data for error */
|
|
#define CT_INVAL 0x06 /* request for disabled lun */
|
|
#define CT_NOPATH 0x07 /* invalid ITL nexus */
|
|
#define CT_INVRXID 0x08 /* (FC only) Invalid RX_ID */
|
|
#define CT_DATA_OVER 0x09 /* (FC only) Data Overrun */
|
|
#define CT_RSELTMO 0x0A /* reselection timeout after 2 tries */
|
|
#define CT_TIMEOUT 0x0B /* timed out */
|
|
#define CT_RESET 0x0E /* SCSI Bus Reset occurred */
|
|
#define CT_PARITY 0x0F /* Uncorrectable Parity Error */
|
|
#define CT_BUS_ERROR 0x10 /* (FC Only) DMA PCI Error */
|
|
#define CT_PANIC 0x13 /* Unrecoverable Error */
|
|
#define CT_PHASE_ERROR 0x14 /* Bus phase sequence error */
|
|
#define CT_DATA_UNDER 0x15 /* (FC only) Data Underrun */
|
|
#define CT_BDR_MSG 0x17 /* Bus Device Reset msg received */
|
|
#define CT_TERMINATED 0x19 /* due to Terminate Transfer mbox cmd */
|
|
#define CT_PORTUNAVAIL 0x28 /* port not available */
|
|
#define CT_LOGOUT 0x29 /* port logout */
|
|
#define CT_PORTCHANGED 0x2A /* port changed */
|
|
#define CT_IDE 0x33 /* Initiator Detected Error */
|
|
#define CT_NOACK 0x35 /* Outstanding Immed. Notify. entry */
|
|
#define CT_SRR 0x45 /* SRR Received */
|
|
#define CT_LUN_RESET 0x48 /* Lun Reset Received */
|
|
|
|
#define CT_HBA_RESET 0xffff /* pseudo error - command destroyed by HBA reset*/
|
|
|
|
/*
|
|
* When the firmware returns a CTIO entry, it may overwrite the last
|
|
* part of the structure with sense data. This starts at offset 0x2E
|
|
* into the entry, which is in the middle of ct_dataseg[1]. Rather
|
|
* than define a new struct for this, I'm just using the sense data
|
|
* offset.
|
|
*/
|
|
#define CTIO_SENSE_OFFSET 0x2E
|
|
|
|
/*
|
|
* Entry length in u_longs. All entries are the same size so
|
|
* any one will do as the numerator.
|
|
*/
|
|
#define UINT32_ENTRY_SIZE (sizeof(at_entry_t)/sizeof(uint32_t))
|
|
|
|
/*
|
|
* QLA2100 CTIO (type 2) entry
|
|
*/
|
|
#define MAXRESPLEN 26
|
|
typedef struct {
|
|
isphdr_t ct_header;
|
|
uint32_t ct_syshandle;
|
|
uint8_t ct_lun; /* lun */
|
|
uint8_t ct_iid; /* initiator id */
|
|
uint16_t ct_rxid; /* response ID */
|
|
uint16_t ct_flags;
|
|
uint16_t ct_status; /* isp status */
|
|
uint16_t ct_timeout;
|
|
uint16_t ct_seg_count;
|
|
uint32_t ct_reloff; /* relative offset */
|
|
uint32_t ct_resid; /* residual length */
|
|
union {
|
|
/*
|
|
* The three different modes that the target driver
|
|
* can set the CTIO{2,3,4} up as.
|
|
*
|
|
* The first is for sending FCP_DATA_IUs as well as
|
|
* (optionally) sending a terminal SCSI status FCP_RSP_IU.
|
|
*
|
|
* The second is for sending SCSI sense data in an FCP_RSP_IU.
|
|
* Note that no FCP_DATA_IUs will be sent.
|
|
*
|
|
* The third is for sending FCP_RSP_IUs as built specifically
|
|
* in system memory as located by the isp_dataseg.
|
|
*/
|
|
struct {
|
|
uint32_t _reserved;
|
|
uint16_t _reserved2;
|
|
uint16_t ct_scsi_status;
|
|
uint32_t ct_xfrlen;
|
|
union {
|
|
ispds_t ct_dataseg[ISP_RQDSEG_T2];
|
|
ispds64_t ct_dataseg64[ISP_RQDSEG_T3];
|
|
ispdslist_t ct_dslist;
|
|
} u;
|
|
} m0;
|
|
struct {
|
|
uint16_t _reserved;
|
|
uint16_t _reserved2;
|
|
uint16_t ct_senselen;
|
|
uint16_t ct_scsi_status;
|
|
uint16_t ct_resplen;
|
|
uint8_t ct_resp[MAXRESPLEN];
|
|
} m1;
|
|
struct {
|
|
uint32_t _reserved;
|
|
uint16_t _reserved2;
|
|
uint16_t _reserved3;
|
|
uint32_t ct_datalen;
|
|
union {
|
|
ispds_t ct_fcp_rsp_iudata_32;
|
|
ispds64_t ct_fcp_rsp_iudata_64;
|
|
} u;
|
|
} m2;
|
|
} rsp;
|
|
} ct2_entry_t;
|
|
|
|
typedef struct {
|
|
isphdr_t ct_header;
|
|
uint32_t ct_syshandle;
|
|
uint16_t ct_iid; /* initiator id */
|
|
uint16_t ct_rxid; /* response ID */
|
|
uint16_t ct_flags;
|
|
uint16_t ct_status; /* isp status */
|
|
uint16_t ct_timeout;
|
|
uint16_t ct_seg_count;
|
|
uint32_t ct_reloff; /* relative offset */
|
|
uint32_t ct_resid; /* residual length */
|
|
union {
|
|
struct {
|
|
uint32_t _reserved;
|
|
uint16_t _reserved2;
|
|
uint16_t ct_scsi_status;
|
|
uint32_t ct_xfrlen;
|
|
union {
|
|
ispds_t ct_dataseg[ISP_RQDSEG_T2];
|
|
ispds64_t ct_dataseg64[ISP_RQDSEG_T3];
|
|
ispdslist_t ct_dslist;
|
|
} u;
|
|
} m0;
|
|
struct {
|
|
uint16_t _reserved;
|
|
uint16_t _reserved2;
|
|
uint16_t ct_senselen;
|
|
uint16_t ct_scsi_status;
|
|
uint16_t ct_resplen;
|
|
uint8_t ct_resp[MAXRESPLEN];
|
|
} m1;
|
|
struct {
|
|
uint32_t _reserved;
|
|
uint16_t _reserved2;
|
|
uint16_t _reserved3;
|
|
uint32_t ct_datalen;
|
|
union {
|
|
ispds_t ct_fcp_rsp_iudata_32;
|
|
ispds64_t ct_fcp_rsp_iudata_64;
|
|
} u;
|
|
} m2;
|
|
} rsp;
|
|
} ct2e_entry_t;
|
|
|
|
/*
|
|
* ct_flags values for CTIO2
|
|
*/
|
|
#define CT2_FLAG_MODE0 0x0000
|
|
#define CT2_FLAG_MODE1 0x0001
|
|
#define CT2_FLAG_MODE2 0x0002
|
|
#define CT2_FLAG_MMASK 0x0003
|
|
#define CT2_DATA_IN 0x0040 /* *to* initiator */
|
|
#define CT2_DATA_OUT 0x0080 /* *from* initiator */
|
|
#define CT2_NO_DATA 0x00C0
|
|
#define CT2_DATAMASK 0x00C0
|
|
#define CT2_CCINCR 0x0100
|
|
#define CT2_FASTPOST 0x0200
|
|
#define CT2_CONFIRM 0x2000
|
|
#define CT2_TERMINATE 0x4000
|
|
#define CT2_SENDSTATUS 0x8000
|
|
|
|
/*
|
|
* ct_status values are (mostly) the same as that for ct_entry.
|
|
*/
|
|
|
|
/*
|
|
* ct_scsi_status values- the low 8 bits are the normal SCSI status
|
|
* we know and love. The upper 8 bits are validity markers for FCP_RSP_IU
|
|
* fields.
|
|
*/
|
|
#define CT2_RSPLEN_VALID 0x0100
|
|
#define CT2_SNSLEN_VALID 0x0200
|
|
#define CT2_DATA_OVER 0x0400
|
|
#define CT2_DATA_UNDER 0x0800
|
|
|
|
/*
|
|
* ISP24XX CTIO
|
|
*/
|
|
#define MAXRESPLEN_24XX 24
|
|
typedef struct {
|
|
isphdr_t ct_header;
|
|
uint32_t ct_syshandle;
|
|
uint16_t ct_nphdl; /* status on returned CTIOs */
|
|
uint16_t ct_timeout;
|
|
uint16_t ct_seg_count;
|
|
uint8_t ct_vpidx;
|
|
uint8_t ct_xflags;
|
|
uint16_t ct_iid_lo; /* low 16 bits of portid */
|
|
uint8_t ct_iid_hi; /* hi 8 bits of portid */
|
|
uint8_t ct_reserved;
|
|
uint32_t ct_rxid;
|
|
uint16_t ct_senselen; /* mode 1 only */
|
|
uint16_t ct_flags;
|
|
uint32_t ct_resid; /* residual length */
|
|
uint16_t ct_oxid;
|
|
uint16_t ct_scsi_status; /* modes 0 && 1 only */
|
|
union {
|
|
struct {
|
|
uint32_t reloff;
|
|
uint32_t reserved0;
|
|
uint32_t ct_xfrlen;
|
|
uint32_t reserved1;
|
|
ispds64_t ds;
|
|
} m0;
|
|
struct {
|
|
uint16_t ct_resplen;
|
|
uint16_t reserved;
|
|
uint8_t ct_resp[MAXRESPLEN_24XX];
|
|
} m1;
|
|
struct {
|
|
uint32_t reserved0;
|
|
uint32_t reserved1;
|
|
uint32_t ct_datalen;
|
|
uint32_t reserved2;
|
|
ispds64_t ct_fcp_rsp_iudata;
|
|
} m2;
|
|
} rsp;
|
|
} ct7_entry_t;
|
|
|
|
/*
|
|
* ct_flags values for CTIO7
|
|
*/
|
|
#define CT7_NO_DATA 0x0000
|
|
#define CT7_DATA_OUT 0x0001 /* *from* initiator */
|
|
#define CT7_DATA_IN 0x0002 /* *to* initiator */
|
|
#define CT7_DATAMASK 0x3
|
|
#define CT7_DSD_ENABLE 0x0004
|
|
#define CT7_CONF_STSFD 0x0010
|
|
#define CT7_EXPLCT_CONF 0x0020
|
|
#define CT7_FLAG_MODE0 0x0000
|
|
#define CT7_FLAG_MODE1 0x0040
|
|
#define CT7_FLAG_MODE2 0x0080
|
|
#define CT7_FLAG_MMASK 0x00C0
|
|
#define CT7_NOACK 0x0100
|
|
#define CT7_TASK_ATTR_SHIFT 9
|
|
#define CT7_CONFIRM 0x2000
|
|
#define CT7_TERMINATE 0x4000
|
|
#define CT7_SENDSTATUS 0x8000
|
|
|
|
/*
|
|
* Type 7 CTIO status codes
|
|
*/
|
|
#define CT7_OK 0x01 /* completed without error */
|
|
#define CT7_ABORTED 0x02 /* aborted by host */
|
|
#define CT7_ERR 0x04 /* see sense data for error */
|
|
#define CT7_INVAL 0x06 /* request for disabled lun */
|
|
#define CT7_INVRXID 0x08 /* Invalid RX_ID */
|
|
#define CT7_DATA_OVER 0x09 /* Data Overrun */
|
|
#define CT7_TIMEOUT 0x0B /* timed out */
|
|
#define CT7_RESET 0x0E /* LIP Rset Received */
|
|
#define CT7_BUS_ERROR 0x10 /* DMA PCI Error */
|
|
#define CT7_REASSY_ERR 0x11 /* DMA reassembly error */
|
|
#define CT7_DATA_UNDER 0x15 /* Data Underrun */
|
|
#define CT7_PORTUNAVAIL 0x28 /* port not available */
|
|
#define CT7_LOGOUT 0x29 /* port logout */
|
|
#define CT7_PORTCHANGED 0x2A /* port changed */
|
|
#define CT7_SRR 0x45 /* SRR Received */
|
|
|
|
/*
|
|
* Other 24XX related target IOCBs
|
|
*/
|
|
|
|
/*
|
|
* ABTS Received
|
|
*/
|
|
typedef struct {
|
|
isphdr_t abts_header;
|
|
uint8_t abts_reserved0[6];
|
|
uint16_t abts_nphdl;
|
|
uint16_t abts_reserved1;
|
|
uint16_t abts_sof;
|
|
uint32_t abts_rxid_abts;
|
|
uint16_t abts_did_lo;
|
|
uint8_t abts_did_hi;
|
|
uint8_t abts_r_ctl;
|
|
uint16_t abts_sid_lo;
|
|
uint8_t abts_sid_hi;
|
|
uint8_t abts_cs_ctl;
|
|
uint16_t abts_fs_ctl;
|
|
uint8_t abts_f_ctl;
|
|
uint8_t abts_type;
|
|
uint16_t abts_seq_cnt;
|
|
uint8_t abts_df_ctl;
|
|
uint8_t abts_seq_id;
|
|
uint16_t abts_rx_id;
|
|
uint16_t abts_ox_id;
|
|
uint32_t abts_param;
|
|
uint8_t abts_reserved2[16];
|
|
uint32_t abts_rxid_task;
|
|
} abts_t;
|
|
|
|
typedef struct {
|
|
isphdr_t abts_rsp_header;
|
|
uint32_t abts_rsp_handle;
|
|
uint16_t abts_rsp_status;
|
|
uint16_t abts_rsp_nphdl;
|
|
uint16_t abts_rsp_ctl_flags;
|
|
uint16_t abts_rsp_sof;
|
|
uint32_t abts_rsp_rxid_abts;
|
|
uint16_t abts_rsp_did_lo;
|
|
uint8_t abts_rsp_did_hi;
|
|
uint8_t abts_rsp_r_ctl;
|
|
uint16_t abts_rsp_sid_lo;
|
|
uint8_t abts_rsp_sid_hi;
|
|
uint8_t abts_rsp_cs_ctl;
|
|
uint16_t abts_rsp_f_ctl_lo;
|
|
uint8_t abts_rsp_f_ctl_hi;
|
|
uint8_t abts_rsp_type;
|
|
uint16_t abts_rsp_seq_cnt;
|
|
uint8_t abts_rsp_df_ctl;
|
|
uint8_t abts_rsp_seq_id;
|
|
uint16_t abts_rsp_rx_id;
|
|
uint16_t abts_rsp_ox_id;
|
|
uint32_t abts_rsp_param;
|
|
union {
|
|
struct {
|
|
uint16_t reserved;
|
|
uint8_t last_seq_id;
|
|
uint8_t seq_id_valid;
|
|
uint16_t aborted_rx_id;
|
|
uint16_t aborted_ox_id;
|
|
uint16_t high_seq_cnt;
|
|
uint16_t low_seq_cnt;
|
|
uint8_t reserved2[4];
|
|
} ba_acc;
|
|
struct {
|
|
uint8_t vendor_unique;
|
|
uint8_t explanation;
|
|
uint8_t reason;
|
|
uint8_t reserved;
|
|
uint8_t reserved2[12];
|
|
} ba_rjt;
|
|
struct {
|
|
uint8_t reserved[8];
|
|
uint32_t subcode1;
|
|
uint32_t subcode2;
|
|
} rsp;
|
|
uint8_t reserved[16];
|
|
} abts_rsp_payload;
|
|
uint32_t abts_rsp_rxid_task;
|
|
} abts_rsp_t;
|
|
|
|
/* terminate this ABTS exchange */
|
|
#define ISP24XX_ABTS_RSP_TERMINATE 0x01
|
|
|
|
#define ISP24XX_ABTS_RSP_COMPLETE 0x00
|
|
#define ISP24XX_ABTS_RSP_RESET 0x04
|
|
#define ISP24XX_ABTS_RSP_ABORTED 0x05
|
|
#define ISP24XX_ABTS_RSP_TIMEOUT 0x06
|
|
#define ISP24XX_ABTS_RSP_INVXID 0x08
|
|
#define ISP24XX_ABTS_RSP_LOGOUT 0x29
|
|
#define ISP24XX_ABTS_RSP_SUBCODE 0x31
|
|
|
|
#define ISP24XX_NO_TASK 0xffffffff
|
|
|
|
/*
|
|
* Miscellaneous
|
|
*
|
|
* These are the limits of the number of dma segments we
|
|
* can deal with based not on the size of the segment counter
|
|
* (which is 16 bits), but on the size of the number of
|
|
* queue entries field (which is 8 bits). We assume no
|
|
* segments in the first queue entry, so we can either
|
|
* have 7 dma segments per continuation entry or 5
|
|
* (for 64 bit dma).. multiplying out by 254....
|
|
*/
|
|
#define ISP_NSEG_MAX 1778
|
|
#define ISP_NSEG64_MAX 1270
|
|
|
|
#endif /* _ISPMBOX_H */
|