dc4ee6ca91
make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
532 lines
19 KiB
C
532 lines
19 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Inc. nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Support library for the SPI4000 card
|
|
*
|
|
* <hr>$Revision: 70030 $<hr>
|
|
*/
|
|
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
|
|
#include <linux/module.h>
|
|
#include <asm/octeon/cvmx.h>
|
|
#include <asm/octeon/cvmx-spi.h>
|
|
#include <asm/octeon/cvmx-twsi.h>
|
|
#include <asm/octeon/cvmx-gmxx-defs.h>
|
|
#else
|
|
#include "cvmx.h"
|
|
#include "cvmx-spi.h"
|
|
#include "cvmx-twsi.h"
|
|
#endif
|
|
|
|
/* If someone is using an old config, make the SPI4000 act like RGMII for backpressure */
|
|
#ifndef CVMX_HELPER_DISABLE_SPI4000_BACKPRESSURE
|
|
#ifndef CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE
|
|
#define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 0
|
|
#endif
|
|
#define CVMX_HELPER_DISABLE_SPI4000_BACKPRESSURE CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE
|
|
#endif
|
|
|
|
#define SPI4000_READ_ADDRESS_HIGH 0xf0
|
|
#define SPI4000_READ_ADDRESS_LOW 0xf1
|
|
#define SPI4000_WRITE_ADDRESS_HIGH 0xf2
|
|
#define SPI4000_WRITE_ADDRESS_LOW 0xf3
|
|
#define SPI4000_READ_DATA0 0xf4 /* High byte */
|
|
#define SPI4000_READ_DATA1 0xf5
|
|
#define SPI4000_READ_DATA2 0xf6
|
|
#define SPI4000_READ_DATA3 0xf7 /* Low byte */
|
|
#define SPI4000_WRITE_DATA0 0xf8 /* High byte */
|
|
#define SPI4000_WRITE_DATA1 0xf9
|
|
#define SPI4000_WRITE_DATA2 0xfa
|
|
#define SPI4000_WRITE_DATA3 0xfb /* Low byte */
|
|
#define SPI4000_DO_READ 0xfc /* Issue a read, returns read status */
|
|
#define SPI4000_GET_READ_STATUS 0xfd /* 0xff: initial state, 2: Read failed, 1: Read pending, 0: Read success */
|
|
#define SPI4000_DO_WRITE 0xfe /* Issue a write, returns write status */
|
|
#define SPI4000_GET_WRITE_STATUS 0xff /* 0xff: initial state, 6: Write failed, 5: Write pending, 4: Write success */
|
|
#define SPI4000_TWSI_ID(interface) (0x66 + interface)
|
|
|
|
/* MDI Single Command (register 0x680) */
|
|
typedef union
|
|
{
|
|
uint32_t u32;
|
|
struct
|
|
{
|
|
uint32_t reserved_21_31 : 11;
|
|
uint32_t mdi_command : 1; /**< Performs an MDIO access. When set, this bit
|
|
self clears upon completion of the access. */
|
|
uint32_t reserved_18_19 : 2;
|
|
uint32_t op_code : 2; /**< MDIO Op Code
|
|
00 = Reserved
|
|
01 = Write Access
|
|
10 = Read Access
|
|
11 = Reserved */
|
|
uint32_t reserved_13_15 : 3;
|
|
uint32_t phy_address : 5; /**< Address of external PHY device */
|
|
uint32_t reserved_5_7 : 3;
|
|
uint32_t reg_address : 5; /**< Address of register within external PHY */
|
|
} s;
|
|
} mdio_single_command_t;
|
|
|
|
|
|
static CVMX_SHARED int interface_is_spi4000[2] = {0,0};
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Write data to the specified SPI4000 address
|
|
*
|
|
* @param interface Interface the SPI4000 is on. (0 or 1)
|
|
* @param address Address to write to
|
|
* @param data Data to write
|
|
*/
|
|
static void __cvmx_spi4000_write(int interface, int address, uint32_t data)
|
|
{
|
|
int status;
|
|
cvmx_twsix_write_ia(0, SPI4000_TWSI_ID(interface), SPI4000_WRITE_ADDRESS_HIGH, 2, 1, address);
|
|
cvmx_twsix_write_ia(0, SPI4000_TWSI_ID(interface), SPI4000_WRITE_DATA0, 4, 1, data);
|
|
|
|
status = cvmx_twsi_read8(SPI4000_TWSI_ID(interface), SPI4000_DO_WRITE);
|
|
while ((status == 5) || (status == 0xff))
|
|
status = cvmx_twsi_read8(SPI4000_TWSI_ID(interface), SPI4000_GET_WRITE_STATUS);
|
|
|
|
if (status != 4)
|
|
cvmx_dprintf("SPI4000: write failed with status=0x%x\n", status);
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Read data from the SPI4000.
|
|
*
|
|
* @param interface Interface the SPI4000 is on. (0 or 1)
|
|
* @param address Address to read from
|
|
*
|
|
* @return Value at the specified address
|
|
*/
|
|
static uint32_t __cvmx_spi4000_read(int interface, int address)
|
|
{
|
|
int status;
|
|
uint64_t data;
|
|
|
|
cvmx_twsix_write_ia(0, SPI4000_TWSI_ID(interface), SPI4000_READ_ADDRESS_HIGH, 2, 1, address);
|
|
|
|
status = cvmx_twsi_read8(SPI4000_TWSI_ID(interface), SPI4000_DO_READ);
|
|
while ((status == 1) || (status == 0xff))
|
|
status = cvmx_twsi_read8(SPI4000_TWSI_ID(interface), SPI4000_GET_READ_STATUS);
|
|
|
|
if (status)
|
|
{
|
|
cvmx_dprintf("SPI4000: read failed with %d\n", status);
|
|
return 0;
|
|
}
|
|
|
|
status = cvmx_twsix_read_ia(0, SPI4000_TWSI_ID(interface), SPI4000_READ_DATA0, 4, 1, &data);
|
|
if (status != 4)
|
|
{
|
|
cvmx_dprintf("SPI4000: read failed with %d\n", status);
|
|
return 0;
|
|
}
|
|
|
|
return data;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Write to a PHY using MDIO on the SPI4000
|
|
*
|
|
* @param interface Interface the SPI4000 is on. (0 or 1)
|
|
* @param port SPI4000 RGMII port to write to. (0-9)
|
|
* @param location MDIO register to write
|
|
* @param val Value to write
|
|
*/
|
|
static void __cvmx_spi4000_mdio_write(int interface, int port, int location, int val)
|
|
{
|
|
static int last_value=-1;
|
|
mdio_single_command_t mdio;
|
|
|
|
mdio.u32 = 0;
|
|
mdio.s.mdi_command = 1;
|
|
mdio.s.op_code = 1;
|
|
mdio.s.phy_address = port;
|
|
mdio.s.reg_address = location;
|
|
|
|
/* Since the TWSI accesses are very slow, don't update the write value
|
|
if it is the same as the last value */
|
|
if (val != last_value)
|
|
{
|
|
last_value = val;
|
|
__cvmx_spi4000_write(interface, 0x0681, val);
|
|
}
|
|
|
|
__cvmx_spi4000_write(interface, 0x0680, mdio.u32);
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Read from a PHY using MDIO on the SPI4000
|
|
*
|
|
* @param interface Interface the SPI4000 is on. (0 or 1)
|
|
* @param port SPI4000 RGMII port to read from. (0-9)
|
|
* @param location MDIO register to read
|
|
* @return The MDI read result
|
|
*/
|
|
static int __cvmx_spi4000_mdio_read(int interface, int port, int location)
|
|
{
|
|
mdio_single_command_t mdio;
|
|
|
|
mdio.u32 = 0;
|
|
mdio.s.mdi_command = 1;
|
|
mdio.s.op_code = 2;
|
|
mdio.s.phy_address = port;
|
|
mdio.s.reg_address = location;
|
|
__cvmx_spi4000_write(interface, 0x0680, mdio.u32);
|
|
|
|
do
|
|
{
|
|
mdio.u32 = __cvmx_spi4000_read(interface, 0x0680);
|
|
} while (mdio.s.mdi_command);
|
|
|
|
return __cvmx_spi4000_read(interface, 0x0681) >> 16;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Configure the SPI4000 MACs
|
|
*/
|
|
static void __cvmx_spi4000_configure_mac(int interface)
|
|
{
|
|
int port;
|
|
// IXF1010 configuration
|
|
// ---------------------
|
|
//
|
|
// Step 1: Apply soft reset to TxFIFO and MAC
|
|
// MAC soft reset register. address=0x505
|
|
// TxFIFO soft reset. address=0x620
|
|
__cvmx_spi4000_write(interface, 0x0505, 0x3ff); // reset all the MACs
|
|
__cvmx_spi4000_write(interface, 0x0620, 0x3ff); // reset the TX FIFOs
|
|
|
|
// Global address and Configuration Register. address=0x500
|
|
//
|
|
// Step 2: Apply soft reset to RxFIFO and SPI.
|
|
__cvmx_spi4000_write(interface, 0x059e, 0x3ff); // reset the RX FIFOs
|
|
|
|
// Step 3a: Take the MAC out of softreset
|
|
// MAC soft reset register. address=0x505
|
|
__cvmx_spi4000_write(interface, 0x0505, 0x0); // reset all the MACs
|
|
|
|
// Step 3b: De-assert port enables.
|
|
// Global address and Configuration Register. address=0x500
|
|
__cvmx_spi4000_write(interface, 0x0500, 0x0); // disable all ports
|
|
|
|
// Step 4: Assert Clock mode change En.
|
|
// Clock and interface mode Change En. address=Serdes base + 0x14
|
|
// Serdes (Serializer/de-serializer). address=0x780
|
|
// [Can't find this one]
|
|
|
|
for (port=0; port < 10; port++)
|
|
{
|
|
int port_offset = port << 7;
|
|
|
|
// Step 5: Set MAC interface mode GMII speed.
|
|
// MAC interface mode and RGMII speed register.
|
|
// address=port_index+0x10
|
|
//
|
|
// OUT port_index+0x10, 0x07 //RGMII 1000 Mbps operation.
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0010, 0x3);
|
|
|
|
// Set the max packet size to 16383 bytes, including the CRC
|
|
__cvmx_spi4000_write(interface, port_offset | 0x000f, 0x3fff);
|
|
|
|
// Step 6: Change Interface to Copper mode
|
|
// Interface mode register. address=0x501
|
|
// [Can't find this]
|
|
|
|
// Step 7: MAC configuration
|
|
// Station address configuration.
|
|
// Source MAC address low register. Source MAC address 31-0.
|
|
// address=port_index+0x00
|
|
// Source MAC address high register. Source MAC address 47-32.
|
|
// address=port_index+0x01
|
|
// where Port index is 0x0 to 0x5.
|
|
// This address is inserted in the source address filed when
|
|
// transmitting pause frames, and is also used to compare against
|
|
// unicast pause frames at the receiving side.
|
|
//
|
|
// OUT port_index+0x00, source MAC address low.
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0000, 0x0000);
|
|
// OUT port_index+0x01, source MAC address high.
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0001, 0x0000);
|
|
|
|
// Step 8: Set desired duplex mode
|
|
// Desired duplex register. address=port_index+0x02
|
|
// [Reserved]
|
|
|
|
// Step 9: Other configuration.
|
|
// FC Enable Register. address=port_index+0x12
|
|
// Discard Unknown Control Frame. address=port_index+0x15
|
|
// Diverse config write register. address=port_index+0x18
|
|
// RX Packet Filter register. address=port_index+0x19
|
|
//
|
|
// Step 9a: Tx FD FC Enabled / Rx FD FC Enabled
|
|
if (CVMX_HELPER_DISABLE_SPI4000_BACKPRESSURE)
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0012, 0);
|
|
else
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0012, 0x7);
|
|
|
|
// Step 9b: Discard unknown control frames
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0015, 0x1);
|
|
|
|
// Step 9c: Enable auto-CRC and auto-padding
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0018, 0x11cd); //??
|
|
|
|
// Step 9d: Drop bad CRC / Drop Pause / No DAF
|
|
__cvmx_spi4000_write(interface, port_offset | 0x0019, 0x00);
|
|
}
|
|
|
|
// Step 9d: Drop frames
|
|
__cvmx_spi4000_write(interface, 0x059f, 0x03ff);
|
|
|
|
for (port=0; port < 10; port++)
|
|
{
|
|
// Step 9e: Set the TX FIFO marks
|
|
__cvmx_spi4000_write(interface, port + 0x0600, 0x0900); // TXFIFO High watermark
|
|
__cvmx_spi4000_write(interface, port + 0x060a, 0x0800); // TXFIFO Low watermark
|
|
__cvmx_spi4000_write(interface, port + 0x0614, 0x0380); // TXFIFO threshold
|
|
}
|
|
|
|
// Step 12: De-assert RxFIFO and SPI Rx/Tx reset
|
|
__cvmx_spi4000_write(interface, 0x059e, 0x0); // reset the RX FIFOs
|
|
|
|
// Step 13: De-assert TxFIFO and MAC reset
|
|
__cvmx_spi4000_write(interface, 0x0620, 0x0); // reset the TX FIFOs
|
|
|
|
// Step 14: Assert port enable
|
|
// Global address and Configuration Register. address=0x500
|
|
__cvmx_spi4000_write(interface, 0x0500, 0x03ff); // enable all ports
|
|
|
|
// Step 15: Disable loopback
|
|
// [Can't find this one]
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Configure the SPI4000 PHYs
|
|
*/
|
|
static void __cvmx_spi4000_configure_phy(int interface)
|
|
{
|
|
int port;
|
|
|
|
/* We use separate loops below since it allows us to save a write
|
|
to the SPI4000 for each repeated value. This adds up to a couple
|
|
of seconds */
|
|
|
|
/* Update the link state before resets. It takes a while for the links to
|
|
come back after the resets. Most likely they'll come back the same as
|
|
they are now */
|
|
for (port=0; port < 10; port++)
|
|
cvmx_spi4000_check_speed(interface, port);
|
|
/* Enable RGMII DELAYS for TX_CLK and RX_CLK (see spec) */
|
|
for (port=0; port < 10; port++)
|
|
__cvmx_spi4000_mdio_write(interface, port, 0x14, 0x00e2);
|
|
/* Advertise pause and 100 Full Duplex. Don't advertise half duplex or 10Mbpa */
|
|
for (port=0; port < 10; port++)
|
|
__cvmx_spi4000_mdio_write(interface, port, 0x4, 0x0d01);
|
|
/* Enable PHY reset */
|
|
for (port=0; port < 10; port++)
|
|
__cvmx_spi4000_mdio_write(interface, port, 0x0, 0x9140);
|
|
}
|
|
|
|
|
|
/**
|
|
* Poll all the SPI4000 port and check its speed
|
|
*
|
|
* @param interface Interface the SPI4000 is on
|
|
* @param port Port to poll (0-9)
|
|
* @return Status of the port. 0=down. All other values the port is up.
|
|
*/
|
|
cvmx_gmxx_rxx_rx_inbnd_t cvmx_spi4000_check_speed(int interface, int port)
|
|
{
|
|
static int phy_status[10] = {0,};
|
|
cvmx_gmxx_rxx_rx_inbnd_t link;
|
|
int read_status;
|
|
|
|
link.u64 = 0;
|
|
|
|
if (!interface_is_spi4000[interface])
|
|
return link;
|
|
if (port>=10)
|
|
return link;
|
|
|
|
/* Register 0x11: PHY Specific Status Register
|
|
Register Function Setting Mode HW Rst SW Rst Notes
|
|
RO 00 Retain note
|
|
17.15:14 Speed 11 = Reserved
|
|
17.a
|
|
10 = 1000 Mbps
|
|
01 = 100 Mbps
|
|
00 = 10 Mbps
|
|
17.13 Duplex 1 = Full-duplex RO 0 Retain note
|
|
0 = Half-duplex 17.a
|
|
17.12 Page Received 1 = Page received RO, LH 0 0
|
|
0 = Page not received
|
|
1 = Resolved RO 0 0 note
|
|
17.11 Speed and
|
|
0 = Not resolved 17.a
|
|
Duplex
|
|
Resolved
|
|
17.10 Link (real time) 1 = Link up RO 0 0
|
|
0 = Link down
|
|
RO 000 000 note
|
|
000 = < 50m
|
|
17.9:7 Cable Length
|
|
001 = 50 - 80m 17.b
|
|
(100/1000
|
|
010 = 80 - 110m
|
|
modes only)
|
|
011 = 110 - 140m
|
|
100 = >140m
|
|
17.6 MDI Crossover 1 = MDIX RO 0 0 note
|
|
Status 0 = MDI 17.a
|
|
17.5 Downshift Sta- 1 = Downshift RO 0 0
|
|
tus 0 = No Downshift
|
|
17.4 Energy Detect 1 = Sleep RO 0 0
|
|
Status 0 = Active
|
|
17.3 Transmit Pause 1 = Transmit pause enabled RO 0 0 note17.
|
|
Enabled 0 = Transmit pause disabled a, 17.c
|
|
17.2 Receive Pause 1 = Receive pause enabled RO 0 0 note17.
|
|
Enabled 0 = Receive pause disabled a, 17.c
|
|
17.1 Polarity (real 1 = Reversed RO 0 0
|
|
time) 0 = Normal
|
|
17.0 Jabber (real 1 = Jabber RO 0 Retain
|
|
time) 0 = No jabber
|
|
*/
|
|
read_status = __cvmx_spi4000_mdio_read(interface, port, 0x11);
|
|
if ((read_status & (1<<10)) == 0)
|
|
read_status = 0; /* If the link is down, force zero */
|
|
else
|
|
read_status &= 0xe400; /* Strip off all the don't care bits */
|
|
if (read_status != phy_status[port])
|
|
{
|
|
phy_status[port] = read_status;
|
|
if (read_status & (1<<10))
|
|
{
|
|
/* If the link is up, we need to set the speed based on the PHY status */
|
|
if (read_status & (1<<15))
|
|
__cvmx_spi4000_write(interface, (port<<7) | 0x0010, 0x3); /* 1Gbps */
|
|
else
|
|
__cvmx_spi4000_write(interface, (port<<7) | 0x0010, 0x1); /* 100Mbps */
|
|
}
|
|
else
|
|
{
|
|
/* If the link is down, force 1Gbps so TX traffic dumps fast */
|
|
__cvmx_spi4000_write(interface, (port<<7) | 0x0010, 0x3); /* 1Gbps */
|
|
}
|
|
}
|
|
|
|
if (read_status & (1<<10))
|
|
{
|
|
link.s.status = 1; /* Link up */
|
|
if (read_status & (1<<15))
|
|
link.s.speed = 2;
|
|
else
|
|
link.s.speed = 1;
|
|
}
|
|
else
|
|
{
|
|
link.s.speed = 2; /* Use 1Gbps when down */
|
|
link.s.status = 0; /* Link Down */
|
|
}
|
|
link.s.duplex = ((read_status & (1<<13)) != 0);
|
|
|
|
return link;
|
|
}
|
|
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
|
|
EXPORT_SYMBOL(cvmx_spi4000_check_speed);
|
|
#endif
|
|
|
|
|
|
/**
|
|
* Return non-zero if the SPI interface has a SPI4000 attached
|
|
*
|
|
* @param interface SPI interface the SPI4000 is connected to
|
|
*
|
|
* @return
|
|
*/
|
|
int cvmx_spi4000_is_present(int interface)
|
|
{
|
|
if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)))
|
|
return 0;
|
|
// Check for the presence of a SPI4000. If it isn't there,
|
|
// these writes will timeout.
|
|
if (cvmx_twsi_write8(SPI4000_TWSI_ID(interface), SPI4000_WRITE_ADDRESS_HIGH, 0))
|
|
return 0;
|
|
if (cvmx_twsi_write8(SPI4000_TWSI_ID(interface), SPI4000_WRITE_ADDRESS_LOW, 0))
|
|
return 0;
|
|
interface_is_spi4000[interface] = 1;
|
|
return 1;
|
|
}
|
|
|
|
|
|
/**
|
|
* Initialize the SPI4000 for use
|
|
*
|
|
* @param interface SPI interface the SPI4000 is connected to
|
|
*/
|
|
int cvmx_spi4000_initialize(int interface)
|
|
{
|
|
if (!cvmx_spi4000_is_present(interface))
|
|
return -1;
|
|
|
|
__cvmx_spi4000_configure_mac(interface);
|
|
__cvmx_spi4000_configure_phy(interface);
|
|
return 0;
|
|
}
|
|
|