freebsd-skq/sys/netipsec/keydb.h
Andrey V. Elsukov db3b3ec5b4 GC some unused declarations.
MFC after:	1 week
2017-04-03 04:44:56 +00:00

233 lines
7.8 KiB
C

/* $FreeBSD$ */
/* $KAME: keydb.h,v 1.14 2000/08/02 17:58:26 sakane Exp $ */
/*-
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _NETIPSEC_KEYDB_H_
#define _NETIPSEC_KEYDB_H_
#ifdef _KERNEL
#include <sys/counter.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <netipsec/key_var.h>
#ifndef _SOCKADDR_UNION_DEFINED
#define _SOCKADDR_UNION_DEFINED
/*
* The union of all possible address formats we handle.
*/
union sockaddr_union {
struct sockaddr sa;
struct sockaddr_in sin;
struct sockaddr_in6 sin6;
};
#endif /* _SOCKADDR_UNION_DEFINED */
/* Security Assocciation Index */
/* NOTE: Ensure to be same address family */
struct secasindex {
union sockaddr_union src; /* source address for SA */
union sockaddr_union dst; /* destination address for SA */
uint8_t proto; /* IPPROTO_ESP or IPPROTO_AH */
uint8_t mode; /* mode of protocol, see ipsec.h */
uint32_t reqid; /* reqid id who owned this SA */
/* see IPSEC_MANUAL_REQID_MAX. */
};
/*
* In order to split out the keydb implementation from that of the
* PF_KEY sockets we need to define a few structures that while they
* may seem common are likely to diverge over time.
*/
/* sadb_identity */
struct secident {
u_int16_t type;
u_int64_t id;
};
/* sadb_key */
struct seckey {
u_int16_t bits;
char *key_data;
};
struct seclifetime {
u_int32_t allocations;
u_int64_t bytes;
u_int64_t addtime;
u_int64_t usetime;
};
struct secnatt {
union sockaddr_union oai; /* original addresses of initiator */
union sockaddr_union oar; /* original address of responder */
uint16_t sport; /* source port */
uint16_t dport; /* destination port */
uint16_t cksum; /* checksum delta */
uint16_t flags;
#define IPSEC_NATT_F_OAI 0x0001
#define IPSEC_NATT_F_OAR 0x0002
};
/* Security Association Data Base */
TAILQ_HEAD(secasvar_queue, secasvar);
struct secashead {
TAILQ_ENTRY(secashead) chain;
LIST_ENTRY(secashead) addrhash; /* hash by sproto+src+dst addresses */
LIST_ENTRY(secashead) drainq; /* used ONLY by flush callout */
struct secasindex saidx;
struct secident *idents; /* source identity */
struct secident *identd; /* destination identity */
/* XXX I don't know how to use them. */
volatile u_int refcnt; /* reference count */
uint8_t state; /* MATURE or DEAD. */
struct secasvar_queue savtree_alive; /* MATURE and DYING SA */
struct secasvar_queue savtree_larval; /* LARVAL SA */
};
struct xformsw;
struct enc_xform;
struct auth_hash;
struct comp_algo;
/*
* Security Association
*
* For INBOUND packets we do SA lookup using SPI, thus only SPIHASH is used.
* For OUTBOUND packets there may be several SA suitable for packet.
* We use key_preferred_oldsa variable to choose better SA. First of we do
* lookup for suitable SAH using packet's saidx. Then we use SAH's savtree
* to search better candidate. The newer SA (by created time) are placed
* in the beginning of the savtree list. There is no preference between
* DYING and MATURE.
*
* NB: Fields with a tdb_ prefix are part of the "glue" used
* to interface to the OpenBSD crypto support. This was done
* to distinguish this code from the mainline KAME code.
* NB: Fields are sorted on the basis of the frequency of changes, i.e.
* constants and unchangeable fields are going first.
* NB: if you want to change this structure, check that this will not break
* key_updateaddresses().
*/
struct secasvar {
uint32_t spi; /* SPI Value, network byte order */
uint32_t flags; /* holder for SADB_KEY_FLAGS */
uint32_t seq; /* sequence number */
pid_t pid; /* message's pid */
u_int ivlen; /* length of IV */
struct secashead *sah; /* back pointer to the secashead */
struct seckey *key_auth; /* Key for Authentication */
struct seckey *key_enc; /* Key for Encryption */
struct secreplay *replay; /* replay prevention */
struct secnatt *natt; /* NAT-T config */
struct mtx *lock; /* update/access lock */
const struct xformsw *tdb_xform; /* transform */
const struct enc_xform *tdb_encalgxform;/* encoding algorithm */
const struct auth_hash *tdb_authalgxform;/* authentication algorithm */
const struct comp_algo *tdb_compalgxform;/* compression algorithm */
uint64_t tdb_cryptoid; /* crypto session id */
uint8_t alg_auth; /* Authentication Algorithm Identifier*/
uint8_t alg_enc; /* Cipher Algorithm Identifier */
uint8_t alg_comp; /* Compression Algorithm Identifier */
uint8_t state; /* Status of this SA (pfkeyv2.h) */
counter_u64_t lft_c; /* CURRENT lifetime */
#define lft_c_allocations lft_c
#define lft_c_bytes lft_c + 1
struct seclifetime *lft_h; /* HARD lifetime */
struct seclifetime *lft_s; /* SOFT lifetime */
uint64_t created; /* time when SA was created */
uint64_t firstused; /* time when SA was first used */
TAILQ_ENTRY(secasvar) chain;
LIST_ENTRY(secasvar) spihash;
LIST_ENTRY(secasvar) drainq; /* used ONLY by flush callout */
uint64_t cntr; /* counter for GCM and CTR */
volatile u_int refcnt; /* reference count */
};
#define SECASVAR_LOCK(_sav) mtx_lock((_sav)->lock)
#define SECASVAR_UNLOCK(_sav) mtx_unlock((_sav)->lock)
#define SECASVAR_LOCK_ASSERT(_sav) mtx_assert((_sav)->lock, MA_OWNED)
#define SAV_ISGCM(_sav) \
((_sav)->alg_enc == SADB_X_EALG_AESGCM8 || \
(_sav)->alg_enc == SADB_X_EALG_AESGCM12 || \
(_sav)->alg_enc == SADB_X_EALG_AESGCM16)
#define SAV_ISCTR(_sav) ((_sav)->alg_enc == SADB_X_EALG_AESCTR)
#define SAV_ISCTRORGCM(_sav) (SAV_ISCTR((_sav)) || SAV_ISGCM((_sav)))
/* Replay prevention, protected by SECASVAR_LOCK:
* (m) locked by mtx
* (c) read only except during creation / free
*/
struct secreplay {
u_int32_t count; /* (m) */
u_int wsize; /* (c) window size, i.g. 4 bytes */
u_int32_t seq; /* (m) used by sender */
u_int32_t lastseq; /* (m) used by receiver */
u_int32_t *bitmap; /* (m) used by receiver */
u_int bitmap_size; /* (c) size of the bitmap array */
int overflow; /* (m) overflow flag */
};
/* socket table due to send PF_KEY messages. */
struct secreg {
LIST_ENTRY(secreg) chain;
struct socket *so;
};
/* acquiring list table. */
struct secacq {
LIST_ENTRY(secacq) chain;
LIST_ENTRY(secacq) addrhash;
LIST_ENTRY(secacq) seqhash;
struct secasindex saidx;
uint32_t seq; /* sequence number */
time_t created; /* for lifetime */
int count; /* for lifetime */
};
#endif /* _KERNEL */
#endif /* _NETIPSEC_KEYDB_H_ */