freebsd-skq/sys/boot/i386/loader/main.c
John Baldwin f1a6fd5d07 Improve the algorithm the loader uses to choose a memory range for its
heap when using a range above 1MB.

Previously the loader would always use the last 3MB in the first memory
range above 1MB for the heap.  However, this memory range is also where the
kernel and any modules are loaded.  If this memory range is "small", then
using the high 3MB for the heap may not leave enough room for the kernel
and modules.

Now the loader will use any range below 4GB for the heap, and the logic to
choose the "high" heap region has moved into biosmem.c.  It sets two
variables that the loader can use for a high heap if it desires.  When a
high heap is enabled (BZIP2, FireWire, GPT, or ZFS), then the following
memory ranges are preferred for the heap in order from best to worst:
- The largest memory region in the SMAP with a start address greater than
  1MB.  The memory region must be at least 3MB in length.  This leaves the
  region starting at 1MB purely for use by the kernel and modules.
- The last 3MB of the memory region starting at 1MB if it is at least 3MB
  in size.  This matches the current behavior except that the current loader
  would break horribly if the first region was not at least 3MB in size.
- The memory range from the end of the loader up to the 640k window.  This
  is the range the loader uses when none of the high-heap-requesting options
  are enabled.

Tested by:	hrs
MFC after:	1 week
2009-12-07 16:29:43 +00:00

355 lines
10 KiB
C

/*-
* Copyright (c) 1998 Michael Smith <msmith@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* MD bootstrap main() and assorted miscellaneous
* commands.
*/
#include <stand.h>
#include <string.h>
#include <machine/bootinfo.h>
#include <machine/psl.h>
#include <sys/reboot.h>
#include "bootstrap.h"
#include "libi386/libi386.h"
#include "btxv86.h"
#define KARGS_FLAGS_CD 0x1
#define KARGS_FLAGS_PXE 0x2
#define KARGS_FLAGS_ZFS 0x4
/* Arguments passed in from the boot1/boot2 loader */
static struct
{
u_int32_t howto;
u_int32_t bootdev;
u_int32_t bootflags;
union {
struct {
u_int32_t pxeinfo;
u_int32_t res2;
};
uint64_t zfspool;
};
u_int32_t bootinfo;
} *kargs;
static u_int32_t initial_howto;
static u_int32_t initial_bootdev;
static struct bootinfo *initial_bootinfo;
struct arch_switch archsw; /* MI/MD interface boundary */
static void extract_currdev(void);
static int isa_inb(int port);
static void isa_outb(int port, int value);
void exit(int code);
/* from vers.c */
extern char bootprog_name[], bootprog_rev[], bootprog_date[], bootprog_maker[];
/* XXX debugging */
extern char end[];
static void *heap_top;
static void *heap_bottom;
int
main(void)
{
int i;
/* Pick up arguments */
kargs = (void *)__args;
initial_howto = kargs->howto;
initial_bootdev = kargs->bootdev;
initial_bootinfo = kargs->bootinfo ? (struct bootinfo *)PTOV(kargs->bootinfo) : NULL;
/* Initialize the v86 register set to a known-good state. */
bzero(&v86, sizeof(v86));
v86.efl = PSL_RESERVED_DEFAULT | PSL_I;
/*
* Initialise the heap as early as possible. Once this is done, malloc() is usable.
*/
bios_getmem();
#if defined(LOADER_BZIP2_SUPPORT) || defined(LOADER_FIREWIRE_SUPPORT) || \
defined(LOADER_GPT_SUPPORT) || defined(LOADER_ZFS_SUPPORT)
if (high_heap_size > 0) {
heap_top = PTOV(high_heap_base + high_heap_size);
heap_bottom = PTOV(high_heap_base);
if (high_heap_base < memtop_copyin)
memtop_copyin = high_heap_base;
} else
#endif
{
heap_top = (void *)PTOV(bios_basemem);
heap_bottom = (void *)end;
}
setheap(heap_bottom, heap_top);
/*
* XXX Chicken-and-egg problem; we want to have console output early, but some
* console attributes may depend on reading from eg. the boot device, which we
* can't do yet.
*
* We can use printf() etc. once this is done.
* If the previous boot stage has requested a serial console, prefer that.
*/
bi_setboothowto(initial_howto);
if (initial_howto & RB_MULTIPLE) {
if (initial_howto & RB_SERIAL)
setenv("console", "comconsole vidconsole", 1);
else
setenv("console", "vidconsole comconsole", 1);
} else if (initial_howto & RB_SERIAL)
setenv("console", "comconsole", 1);
else if (initial_howto & RB_MUTE)
setenv("console", "nullconsole", 1);
cons_probe();
/*
* Initialise the block cache
*/
bcache_init(32, 512); /* 16k cache XXX tune this */
/*
* Special handling for PXE and CD booting.
*/
if (kargs->bootinfo == 0) {
/*
* We only want the PXE disk to try to init itself in the below
* walk through devsw if we actually booted off of PXE.
*/
if (kargs->bootflags & KARGS_FLAGS_PXE)
pxe_enable(kargs->pxeinfo ? PTOV(kargs->pxeinfo) : NULL);
else if (kargs->bootflags & KARGS_FLAGS_CD)
bc_add(initial_bootdev);
}
archsw.arch_autoload = i386_autoload;
archsw.arch_getdev = i386_getdev;
archsw.arch_copyin = i386_copyin;
archsw.arch_copyout = i386_copyout;
archsw.arch_readin = i386_readin;
archsw.arch_isainb = isa_inb;
archsw.arch_isaoutb = isa_outb;
/*
* March through the device switch probing for things.
*/
for (i = 0; devsw[i] != NULL; i++)
if (devsw[i]->dv_init != NULL)
(devsw[i]->dv_init)();
printf("BIOS %dkB/%dkB available memory\n", bios_basemem / 1024, bios_extmem / 1024);
if (initial_bootinfo != NULL) {
initial_bootinfo->bi_basemem = bios_basemem / 1024;
initial_bootinfo->bi_extmem = bios_extmem / 1024;
}
/* detect ACPI for future reference */
biosacpi_detect();
/* detect SMBIOS for future reference */
smbios_detect();
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
extract_currdev(); /* set $currdev and $loaddev */
setenv("LINES", "24", 1); /* optional */
bios_getsmap();
interact(); /* doesn't return */
/* if we ever get here, it is an error */
return (1);
}
/*
* Set the 'current device' by (if possible) recovering the boot device as
* supplied by the initial bootstrap.
*
* XXX should be extended for netbooting.
*/
static void
extract_currdev(void)
{
struct i386_devdesc new_currdev;
int biosdev = -1;
/* Assume we are booting from a BIOS disk by default */
new_currdev.d_dev = &biosdisk;
/* new-style boot loaders such as pxeldr and cdldr */
if (kargs->bootinfo == 0) {
if ((kargs->bootflags & KARGS_FLAGS_CD) != 0) {
/* we are booting from a CD with cdboot */
new_currdev.d_dev = &bioscd;
new_currdev.d_unit = bc_bios2unit(initial_bootdev);
} else if ((kargs->bootflags & KARGS_FLAGS_PXE) != 0) {
/* we are booting from pxeldr */
new_currdev.d_dev = &pxedisk;
new_currdev.d_unit = 0;
} else {
/* we don't know what our boot device is */
new_currdev.d_kind.biosdisk.slice = -1;
new_currdev.d_kind.biosdisk.partition = 0;
biosdev = -1;
}
} else if ((initial_bootdev & B_MAGICMASK) != B_DEVMAGIC) {
/* The passed-in boot device is bad */
new_currdev.d_kind.biosdisk.slice = -1;
new_currdev.d_kind.biosdisk.partition = 0;
biosdev = -1;
} else {
new_currdev.d_kind.biosdisk.slice = B_SLICE(initial_bootdev) - 1;
new_currdev.d_kind.biosdisk.partition = B_PARTITION(initial_bootdev);
biosdev = initial_bootinfo->bi_bios_dev;
/*
* If we are booted by an old bootstrap, we have to guess at the BIOS
* unit number. We will lose if there is more than one disk type
* and we are not booting from the lowest-numbered disk type
* (ie. SCSI when IDE also exists).
*/
if ((biosdev == 0) && (B_TYPE(initial_bootdev) != 2)) /* biosdev doesn't match major */
biosdev = 0x80 + B_UNIT(initial_bootdev); /* assume harddisk */
}
new_currdev.d_type = new_currdev.d_dev->dv_type;
/*
* If we are booting off of a BIOS disk and we didn't succeed in determining
* which one we booted off of, just use disk0: as a reasonable default.
*/
if ((new_currdev.d_type == biosdisk.dv_type) &&
((new_currdev.d_unit = bd_bios2unit(biosdev)) == -1)) {
printf("Can't work out which disk we are booting from.\n"
"Guessed BIOS device 0x%x not found by probes, defaulting to disk0:\n", biosdev);
new_currdev.d_unit = 0;
}
env_setenv("currdev", EV_VOLATILE, i386_fmtdev(&new_currdev),
i386_setcurrdev, env_nounset);
env_setenv("loaddev", EV_VOLATILE, i386_fmtdev(&new_currdev), env_noset,
env_nounset);
#ifdef LOADER_ZFS_SUPPORT
/*
* If we were started from a ZFS-aware boot2, we can work out
* which ZFS pool we are booting from.
*/
if (kargs->bootflags & KARGS_FLAGS_ZFS) {
/*
* Dig out the pool guid and convert it to a 'unit number'
*/
uint64_t guid;
int unit;
char devname[32];
extern int zfs_guid_to_unit(uint64_t);
guid = kargs->zfspool;
unit = zfs_guid_to_unit(guid);
if (unit >= 0) {
sprintf(devname, "zfs%d", unit);
setenv("currdev", devname, 1);
}
}
#endif
}
COMMAND_SET(reboot, "reboot", "reboot the system", command_reboot);
static int
command_reboot(int argc, char *argv[])
{
int i;
for (i = 0; devsw[i] != NULL; ++i)
if (devsw[i]->dv_cleanup != NULL)
(devsw[i]->dv_cleanup)();
printf("Rebooting...\n");
delay(1000000);
__exit(0);
}
/* provide this for panic, as it's not in the startup code */
void
exit(int code)
{
__exit(code);
}
COMMAND_SET(heap, "heap", "show heap usage", command_heap);
static int
command_heap(int argc, char *argv[])
{
mallocstats();
printf("heap base at %p, top at %p, upper limit at %p\n", heap_bottom,
sbrk(0), heap_top);
return(CMD_OK);
}
/* ISA bus access functions for PnP, derived from <machine/cpufunc.h> */
static int
isa_inb(int port)
{
u_char data;
if (__builtin_constant_p(port) &&
(((port) & 0xffff) < 0x100) &&
((port) < 0x10000)) {
__asm __volatile("inb %1,%0" : "=a" (data) : "id" ((u_short)(port)));
} else {
__asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port));
}
return(data);
}
static void
isa_outb(int port, int value)
{
u_char al = value;
if (__builtin_constant_p(port) &&
(((port) & 0xffff) < 0x100) &&
((port) < 0x10000)) {
__asm __volatile("outb %0,%1" : : "a" (al), "id" ((u_short)(port)));
} else {
__asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port));
}
}