freebsd-skq/sys/dev/aic7xxx/ahc_eisa.c
Justin T. Gibbs 6fb77fef4d This is an MFC candidate.
ahc_eisa.c:
	Change aic7770_map_int to take an additional irq parameter.
	Although we can get the irq from the eisa dev under FreeBSD,
	we can't do this under linux, so the OSM interface must supply
	this.

ahc_pci.c:
	Move ahc_power_state_change() to the OSM.  This allows us to
	use a platform supplied function that does the same thing.
	-current will move to the FreeBSD native API in the near
	future.

aic7770.c:
	Sync up with core changes to support Linux EISA.

	We now store a 2 bit primary channel number rather
	than a bit flag that only allows b to be the primary
	channel.   Adjust for this change.

aic7xxx.c:
	Namespace and staticization cleanup.  All exported symbols
	use an "ahc_" prefix to avoid collisions with other modules.

	Correct a logic bug that prevented us from dropping
	ATN during some exceptional conditions during message
	processing.

	Take advantage of a new flag managed by the sequencer
	that indicates if an SCB fetch is in progress.  If so,
	the currently selected SCB needs to be returned to the
	free list to prevent an SCB leak.  This leak is a rarity
	and would only occur if a bus reset or timeout resulting
	in a bus reset occurred in the middle of an SCB fetch.

	Don't attempt to perform ULTRA transfers on ultra capable
	adapters missing the external precision resistor required
	for ultra speeds.  I've never encountered an adapter
	configured this way, but better safe than sorry.

        Handle the case of 5MHz user sync rate set as "0" instead of 0x1c
        in scratch ram.

        If we lookup a period of 0 in our table (async), clear the scsi offset.

aic7xxx.h:
	Adjust for the primary channel being represented as
	a 2 bit integer in the flags member of the ahc softc.

	Cleanup the flags definitions so that comment blocks are
	not cramped.

	Update seeprom definitions to correctly reflect the fact
	that the primary channel is represented as a 2 bit integer.

	Add AHC_ULTRA_DIASABLED softc flag to denote controllers
	missing the external precision resistor.

aic7xxx.reg:
	Add DFCACHETH to the definition of DFSTATUS for completness sake.

	Add SEQ_FLAGS2 which currently only contains the SCB_DMA
	(SCB DMA in progress) flag.

aic7xxx.seq:
	Correct a problem when one lun has a disconnected untagged
	transaction and another lun has disconnected tagged transactions.
	Just because an entry is found in the untagged table doesn't
	mean that it will match.  If the match on the lun fails, cleanup
	the SCB (return it to the disconnected list or free it), and snoop
	for a tag message.  Before this change, we reported an unsolicited
	reselection.  This bug was introduced about a month ago during an
	overly aggressive optimization pass on the reselection code.

	When cleaning up an SCB, we can't just blindly free the SCB.  In
	the paging case, if the SCB came off of the disconnected list, its
	state may never have been updated in host memory.  So, check the
	disconnected bit in SCB_CONTROL and return the SCB to the disconnected
	list if appropriate.

	Manage the SCB_DMA flag of SEQ_FLAGS2.

	More carefully shutdown the S/G dma engine in all cases by using
	a subroutine.  Supposedly not doing this can cause an arbiter hang
	on some ULTRA2 chips.

	Formatting cleanup.

	On some chips, at least the aic7856, the transition from
	MREQPEND to HDONE can take a full 4 clock cycles.  Test
	HDONE one more time to avoid this race.  We only want our
	FIFO hung recovery code to execute when the engine is
	really hung.

aic7xxx_93cx6.c:
	Sync perforce ids.

aic7xxx_freebsd.c:
	Adjust for the primary channel being a 2 bit integer
	rather than a flag for 'B' channel being the primary.

	Namespace cleanup.

	Unpause the sequencer in one error recovery path that
	neglected to do so.  This could have caused us to perform
	a bus reset when a recovery message might have otherwise been
	successful.

aic7xxx_freebsd.h:
	Use AHC_PCI_CONFIG for controlling compilation of PCI
	support consistently throughout the driver.

	Move ahc_power_state_change() to OSM.

aic7xxx_inline.h
	Namespace cleanup.

	Adjust our interrupt handler so it will work in the edge
	interrupt case.  We must process all interrupt sources
	when the interrupt fires or risk not ever getting an
	interrupt again.  This involves marking the fact
	that we are relying on an edge interrupt in ahc->flags
	and checking for this condition in addition to the
	AHC_ALL_INTERRUPTS flag.  This fixes hangs on the
	284X and any other aic7770 installation where level
	interrupts are not available.

aic7xxx_pci.c:
	Move the powerstate manipulation code into the OSM.  Several
	OSes now provide this functionality natively.

	Take another shot at using the data stored in scratch ram
	if the SCB2 signature is correct and no SEEPROM data is
	available.  In the past this failed if external SCB ram
	was configured because the memory port was locked.  We
	now release the memory port prior to testing the values
	in SCB2 and re-acquire it prior to doing termination control.

	Adjust for new 2 bit primary channel setting.

	Trust the STPWLEVEL setting on v 3.X BIOSes too.

	Configure any 785X ID in the same fashion and assume
	that any device with a rev id of 1 or higher has the
	PCI 2.1 retry bug.
2001-03-11 06:34:17 +00:00

214 lines
5.5 KiB
C

/*
* FreeBSD, EISA product support functions
*
*
* Copyright (c) 1994-1998, 2000, 2001 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id$
*
* $FreeBSD$
*/
#include <dev/aic7xxx/aic7xxx_freebsd.h>
#include <dev/eisa/eisaconf.h>
static int
aic7770_probe(device_t dev)
{
struct aic7770_identity *entry;
struct resource *regs;
uint32_t iobase;
bus_space_handle_t bsh;
bus_space_tag_t tag;
u_int irq;
u_int intdef;
u_int hcntrl;
int shared;
int rid;
int error;
entry = aic7770_find_device(eisa_get_id(dev));
if (entry == NULL)
return (ENXIO);
device_set_desc(dev, entry->name);
iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE) + AHC_EISA_SLOT_OFFSET;
eisa_add_iospace(dev, iobase, AHC_EISA_IOSIZE, RESVADDR_NONE);
rid = 0;
regs = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (regs == NULL) {
device_printf(dev, "Unable to map I/O space?!\n");
return ENOMEM;
}
tag = rman_get_bustag(regs);
bsh = rman_get_bushandle(regs);
error = 0;
/* Pause the card preseving the IRQ type */
hcntrl = bus_space_read_1(tag, bsh, HCNTRL) & IRQMS;
bus_space_write_1(tag, bsh, HCNTRL, hcntrl | PAUSE);
while ((bus_space_read_1(tag, bsh, HCNTRL) & PAUSE) == 0)
;
/* Make sure we have a valid interrupt vector */
intdef = bus_space_read_1(tag, bsh, INTDEF);
shared = (intdef & EDGE_TRIG) ? EISA_TRIGGER_EDGE : EISA_TRIGGER_LEVEL;
irq = intdef & VECTOR;
switch (irq) {
case 9:
case 10:
case 11:
case 12:
case 14:
case 15:
break;
default:
printf("aic7770 at slot %d: illegal irq setting %d\n",
eisa_get_slot(dev), intdef);
error = ENXIO;
}
if (error == 0)
eisa_add_intr(dev, irq, shared);
bus_release_resource(dev, SYS_RES_IOPORT, rid, regs);
return (error);
}
static int
aic7770_attach(device_t dev)
{
struct aic7770_identity *entry;
struct ahc_softc *ahc;
char *name;
int error;
entry = aic7770_find_device(eisa_get_id(dev));
if (entry == NULL)
return (ENXIO);
/*
* Allocate a softc for this card and
* set it up for attachment by our
* common detect routine.
*/
name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT);
if (name == NULL)
return (ENOMEM);
strcpy(name, device_get_nameunit(dev));
ahc = ahc_alloc(dev, name);
if (ahc == NULL)
return (ENOMEM);
ahc_set_unit(ahc, device_get_unit(dev));
/* Allocate a dmatag for our SCB DMA maps */
/* XXX Should be a child of the PCI bus dma tag */
error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/1,
/*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/MAXBSIZE, /*nsegments*/AHC_NSEG,
/*maxsegsz*/AHC_MAXTRANSFER_SIZE,
/*flags*/BUS_DMA_ALLOCNOW,
&ahc->parent_dmat);
if (error != 0) {
printf("ahc_eisa_attach: Could not allocate DMA tag "
"- error %d\n", error);
ahc_free(ahc);
return (ENOMEM);
}
ahc->dev_softc = dev;
error = aic7770_config(ahc, entry);
if (error != 0) {
ahc_free(ahc);
return (error);
}
ahc_attach(ahc);
return (0);
}
int
aic7770_map_registers(struct ahc_softc *ahc)
{
struct resource *regs;
int rid;
rid = 0;
regs = bus_alloc_resource(ahc->dev_softc, SYS_RES_IOPORT,
&rid, 0, ~0, 1, RF_ACTIVE);
if (regs == NULL) {
device_printf(ahc->dev_softc, "Unable to map I/O space?!\n");
return ENOMEM;
}
ahc->platform_data->regs_res_type = SYS_RES_IOPORT;
ahc->platform_data->regs_res_id = rid,
ahc->platform_data->regs = regs;
ahc->tag = rman_get_bustag(regs);
ahc->bsh = rman_get_bushandle(regs);
return (0);
}
int
aic7770_map_int(struct ahc_softc *ahc, int irq)
{
int zero;
zero = 0;
ahc->platform_data->irq =
bus_alloc_resource(ahc->dev_softc, SYS_RES_IRQ, &zero,
0, ~0, 1, RF_ACTIVE);
if (ahc->platform_data->irq == NULL)
return (ENOMEM);
ahc->platform_data->irq_res_type = SYS_RES_IRQ;
return (0);
}
static device_method_t ahc_eisa_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, aic7770_probe),
DEVMETHOD(device_attach, aic7770_attach),
DEVMETHOD(device_detach, ahc_detach),
{ 0, 0 }
};
static driver_t ahc_eisa_driver = {
"ahc",
ahc_eisa_methods,
sizeof(struct ahc_softc)
};
static devclass_t ahc_devclass;
DRIVER_MODULE(ahc, eisa, ahc_eisa_driver, ahc_devclass, 0, 0);