6feaaed878
was needed to make attach/detach of devices work, which is needed for the PCCARD support. (PCCARD support is still not working though, more to come on that) Support the CMD646 chip which is used on many alphas, sadly only in WDMA2 mode, as the silicon is broken beyond belief for UDMA modes. Lots of cosmetic fixes here and there. Sorry for the size of this megapatchfromhell but it was not possible otherwise... newbus patches based on work from: dfr (Doug Rabson)
334 lines
13 KiB
C
334 lines
13 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* ATA register defines */
|
|
#define ATA_DATA 0x00 /* data register */
|
|
#define ATA_ERROR 0x01 /* (R) error register */
|
|
#define ATA_E_NM 0x02 /* no media */
|
|
#define ATA_E_ABORT 0x04 /* command aborted */
|
|
#define ATA_E_MCR 0x08 /* media change request */
|
|
#define ATA_E_IDNF 0x10 /* ID not found */
|
|
#define ATA_E_MC 0x20 /* media changed */
|
|
#define ATA_E_UNC 0x40 /* uncorrectable data */
|
|
#define ATA_E_ICRC 0x80 /* UDMA crc error */
|
|
|
|
#define ATA_FEATURE 0x01 /* (W) feature register */
|
|
#define ATA_F_DMA 0x01 /* enable DMA */
|
|
#define ATA_F_OVL 0x02 /* enable overlap */
|
|
|
|
#define ATA_COUNT 0x02 /* (W) sector count */
|
|
#define ATA_IREASON 0x02 /* (R) interrupt reason */
|
|
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
|
|
#define ATA_I_IN 0x02 /* read (1) | write (0) */
|
|
#define ATA_I_RELEASE 0x04 /* released bus (1) */
|
|
#define ATA_I_TAGMASK 0xf8 /* tag mask */
|
|
|
|
#define ATA_SECTOR 0x03 /* sector # */
|
|
#define ATA_CYL_LSB 0x04 /* cylinder# LSB */
|
|
#define ATA_CYL_MSB 0x05 /* cylinder# MSB */
|
|
#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */
|
|
#define ATA_D_LBA 0x40 /* use LBA adressing */
|
|
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
|
|
|
|
#define ATA_CMD 0x07 /* command register */
|
|
#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */
|
|
#define ATA_C_READ 0x20 /* read command */
|
|
#define ATA_C_WRITE 0x30 /* write command */
|
|
#define ATA_C_PACKET_CMD 0xa0 /* packet command */
|
|
#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/
|
|
#define ATA_C_READ_MULTI 0xc4 /* read multi command */
|
|
#define ATA_C_WRITE_MULTI 0xc5 /* write multi command */
|
|
#define ATA_C_SET_MULTI 0xc6 /* set multi size command */
|
|
#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */
|
|
#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */
|
|
#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */
|
|
#define ATA_C_SETFEATURES 0xef /* features command */
|
|
#define ATA_C_F_SETXFER 0x03 /* set transfer mode */
|
|
#define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */
|
|
#define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */
|
|
|
|
#define ATA_STATUS 0x07 /* status register */
|
|
#define ATA_S_ERROR 0x01 /* error */
|
|
#define ATA_S_INDEX 0x02 /* index */
|
|
#define ATA_S_CORR 0x04 /* data corrected */
|
|
#define ATA_S_DRQ 0x08 /* data request */
|
|
#define ATA_S_DSC 0x10 /* drive seek completed */
|
|
#define ATA_S_SERVICE 0x10 /* drive needs service */
|
|
#define ATA_S_DWF 0x20 /* drive write fault */
|
|
#define ATA_S_DMA 0x20 /* DMA ready */
|
|
#define ATA_S_READY 0x40 /* drive ready */
|
|
#define ATA_S_BUSY 0x80 /* busy */
|
|
|
|
#define ATA_ALTPORT 0x206 /* alternate status register */
|
|
#define ATA_ALTPORT_PCCARD 0x8 /* ditto on PCCARD devices */
|
|
#define ATA_A_IDS 0x02 /* disable interrupts */
|
|
#define ATA_A_RESET 0x04 /* RESET controller */
|
|
#define ATA_A_4BIT 0x08 /* 4 head bits */
|
|
|
|
#define ATA_ALTIOSIZE 0x01
|
|
|
|
/* misc defines */
|
|
#define ATA_MASTER 0x00
|
|
#define ATA_SLAVE 0x10
|
|
#define ATA_IOSIZE 0x08
|
|
#define ATA_OP_FINISHED 0x00
|
|
#define ATA_OP_CONTINUES 0x01
|
|
#define ATA_DEV(unit) ((unit == ATA_MASTER) ? 0 : 1)
|
|
#define ATA_PARAM(scp, unit) scp->dev_param[ATA_DEV(unit)]
|
|
|
|
|
|
/* busmaster DMA related defines */
|
|
#define ATA_BM_OFFSET1 0x08
|
|
#define ATA_DMA_ENTRIES 256
|
|
#define ATA_DMA_EOT 0x80000000
|
|
|
|
#define ATA_BMCMD_PORT 0x00
|
|
#define ATA_BMCMD_START_STOP 0x01
|
|
#define ATA_BMCMD_WRITE_READ 0x08
|
|
|
|
#define ATA_BMSTAT_PORT 0x02
|
|
#define ATA_BMSTAT_ACTIVE 0x01
|
|
#define ATA_BMSTAT_ERROR 0x02
|
|
#define ATA_BMSTAT_INTERRUPT 0x04
|
|
#define ATA_BMSTAT_MASK 0x07
|
|
#define ATA_BMSTAT_DMA_MASTER 0x20
|
|
#define ATA_BMSTAT_DMA_SLAVE 0x40
|
|
#define ATA_BMSTAT_DMA_SIMPLEX 0x80
|
|
|
|
#define ATA_BMDTP_PORT 0x04
|
|
|
|
#define ATA_BMIOSIZE 0x20
|
|
|
|
/* structure for holding DMA address data */
|
|
struct ata_dmaentry {
|
|
u_int32_t base;
|
|
u_int32_t count;
|
|
};
|
|
|
|
/* ATA/ATAPI device parameter information */
|
|
struct ata_params {
|
|
u_int8_t cmdsize :2; /* packet command size */
|
|
#define ATAPI_PSIZE_12 0 /* 12 bytes */
|
|
#define ATAPI_PSIZE_16 1 /* 16 bytes */
|
|
|
|
u_int8_t :3;
|
|
u_int8_t drqtype :2; /* DRQ type */
|
|
#define ATAPI_DRQT_MPROC 0 /* cpu 3 ms delay */
|
|
#define ATAPI_DRQT_INTR 1 /* intr 10 ms delay */
|
|
#define ATAPI_DRQT_ACCEL 2 /* accel 50 us delay */
|
|
|
|
u_int8_t removable :1; /* device is removable */
|
|
u_int8_t device_type :5; /* device type */
|
|
#define ATAPI_TYPE_DIRECT 0 /* disk/floppy */
|
|
#define ATAPI_TYPE_TAPE 1 /* streaming tape */
|
|
#define ATAPI_TYPE_CDROM 5 /* CD-ROM device */
|
|
#define ATAPI_TYPE_OPTICAL 7 /* optical disk */
|
|
|
|
u_int8_t :1;
|
|
u_int8_t proto :2; /* command protocol */
|
|
#define ATAPI_PROTO_ATAPI 2
|
|
|
|
u_int16_t cylinders; /* number of cylinders */
|
|
int16_t reserved2;
|
|
u_int16_t heads; /* # heads */
|
|
int16_t unfbytespertrk; /* # unformatted bytes/track */
|
|
int16_t unfbytes; /* # unformatted bytes/sector */
|
|
u_int16_t sectors; /* # sectors/track */
|
|
int16_t vendorunique0[3];
|
|
int8_t serial[20]; /* serial number */
|
|
int16_t buffertype; /* buffer type */
|
|
#define ATA_BT_SINGLEPORTSECTOR 1 /* 1 port, 1 sector buffer */
|
|
#define ATA_BT_DUALPORTMULTI 2 /* 2 port, mult sector buffer */
|
|
#define ATA_BT_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
|
|
int16_t buffersize; /* buf size, 512-byte units */
|
|
int16_t necc; /* ecc bytes appended */
|
|
int8_t revision[8]; /* firmware revision */
|
|
int8_t model[40]; /* model name */
|
|
int8_t nsecperint; /* sectors per interrupt */
|
|
int8_t vendorunique1;
|
|
int16_t usedmovsd; /* double word read/write? */
|
|
|
|
u_int8_t vendorcap; /* vendor capabilities */
|
|
u_int8_t dmaflag :1; /* DMA supported - always 1 */
|
|
u_int8_t lbaflag :1; /* LBA supported - always 1 */
|
|
u_int8_t iordydis :1; /* IORDY may be disabled */
|
|
u_int8_t iordyflag :1; /* IORDY supported */
|
|
u_int8_t softreset :1; /* needs softreset when busy */
|
|
u_int8_t stdby_ovlap :1; /* standby/overlap supported */
|
|
u_int8_t queuing :1; /* supports queuing overlap */
|
|
u_int8_t idmaflag :1; /* interleaved DMA supported */
|
|
int16_t capvalidate; /* validation for above */
|
|
|
|
int8_t vendorunique3;
|
|
int8_t opiomode; /* PIO modes 0-2 */
|
|
int8_t vendorunique4;
|
|
int8_t odmamode; /* old DMA modes, not ATA-3 */
|
|
|
|
int16_t atavalid; /* fields valid */
|
|
#define ATA_FLAG_54_58 1 /* words 54-58 valid */
|
|
#define ATA_FLAG_64_70 2 /* words 64-70 valid */
|
|
#define ATA_FLAG_88 4 /* word 88 valid */
|
|
|
|
int16_t currcyls;
|
|
int16_t currheads;
|
|
int16_t currsectors;
|
|
int16_t currsize0;
|
|
int16_t currsize1;
|
|
int8_t currmultsect;
|
|
int8_t multsectvalid;
|
|
int32_t lbasize;
|
|
|
|
int16_t sdmamodes; /* singleword DMA modes */
|
|
int16_t wdmamodes; /* multiword DMA modes */
|
|
int16_t apiomodes; /* advanced PIO modes */
|
|
|
|
u_int16_t mwdmamin; /* min. M/W DMA time/word ns */
|
|
u_int16_t mwdmarec; /* rec. M/W DMA time ns */
|
|
u_int16_t pioblind; /* min. PIO cycle w/o flow */
|
|
u_int16_t pioiordy; /* min. PIO cycle IORDY flow */
|
|
|
|
int16_t reserved69;
|
|
int16_t reserved70;
|
|
u_int16_t rlsovlap; /* rel time (us) for overlap */
|
|
u_int16_t rlsservice; /* rel time (us) for service */
|
|
int16_t reserved73;
|
|
int16_t reserved74;
|
|
int16_t queuelen;
|
|
int16_t reserved76;
|
|
int16_t reserved77;
|
|
int16_t reserved78;
|
|
int16_t reserved79;
|
|
int16_t versmajor;
|
|
int16_t versminor;
|
|
int16_t featsupp1;
|
|
int16_t featsupp2;
|
|
int16_t featsupp3;
|
|
int16_t featenab1;
|
|
int16_t featenab2;
|
|
int16_t featenab3;
|
|
int16_t udmamodes; /* UltraDMA modes */
|
|
int16_t erasetime;
|
|
int16_t enherasetime;
|
|
int16_t apmlevel;
|
|
int16_t masterpasswdrev;
|
|
u_int16_t masterhwres :8;
|
|
u_int16_t slavehwres :5;
|
|
u_int16_t cblid :1;
|
|
u_int16_t reserved93_1415 :2;
|
|
int16_t reserved94[32];
|
|
int16_t rmvstat;
|
|
int16_t securstat;
|
|
int16_t reserved129[30];
|
|
int16_t cfapwrmode;
|
|
int16_t reserved161[84];
|
|
int16_t integrity;
|
|
};
|
|
|
|
/* structure describing an ATA device */
|
|
struct ata_softc {
|
|
struct device *dev; /* device handle */
|
|
int32_t unit; /* unit on this controller */
|
|
struct resource *r_io; /* io addr resource handle */
|
|
struct resource *r_altio; /* altio addr resource handle */
|
|
struct resource *r_bmio; /* bmio addr resource handle */
|
|
struct resource *r_irq; /* interrupt of this channel */
|
|
int32_t ioaddr; /* physical port addr */
|
|
int32_t altioaddr; /* physical alt port addr */
|
|
int32_t bmaddr; /* physical bus master port */
|
|
int32_t chiptype; /* pciid of controller chip */
|
|
struct ata_params *dev_param[2]; /* ptr to devices params */
|
|
void *dev_softc[2]; /* ptr to devices softc's */
|
|
struct ata_dmaentry *dmatab[2]; /* DMA transfer tables */
|
|
int32_t mode[2]; /* transfer mode for devices */
|
|
#define ATA_PIO 0x00
|
|
#define ATA_PIO0 0x08
|
|
#define ATA_PIO1 0x09
|
|
#define ATA_PIO2 0x0a
|
|
#define ATA_PIO3 0x0b
|
|
#define ATA_PIO4 0x0c
|
|
#define ATA_DMA 0x10
|
|
#define ATA_WDMA2 0x22
|
|
#define ATA_UDMA2 0x42
|
|
#define ATA_UDMA4 0x44
|
|
|
|
int32_t flags; /* controller flags */
|
|
#define ATA_DMA_ACTIVE 0x01
|
|
#define ATA_ATAPI_DMA_RO 0x02
|
|
#define ATA_USE_16BIT 0x04
|
|
#define ATA_ATTACHED 0x08
|
|
|
|
int32_t devices; /* what is present */
|
|
#define ATA_ATA_MASTER 0x01
|
|
#define ATA_ATA_SLAVE 0x02
|
|
#define ATA_ATAPI_MASTER 0x04
|
|
#define ATA_ATAPI_SLAVE 0x08
|
|
|
|
u_int8_t status; /* last controller status */
|
|
u_int8_t error; /* last controller error */
|
|
int32_t active; /* active processing request */
|
|
#define ATA_IDLE 0x0
|
|
#define ATA_IMMEDIATE 0x1
|
|
#define ATA_WAIT_INTR 0x2
|
|
#define ATA_WAIT_READY 0x3
|
|
#define ATA_ACTIVE 0x4
|
|
#define ATA_ACTIVE_ATA 0x5
|
|
#define ATA_ACTIVE_ATAPI 0x6
|
|
#define ATA_REINITING 0x7
|
|
|
|
TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */
|
|
TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */
|
|
void *running; /* currently running request */
|
|
};
|
|
|
|
/* To convert unit numbers to devices */
|
|
extern devclass_t ata_devclass;
|
|
|
|
/* public prototypes */
|
|
void ata_start(struct ata_softc *);
|
|
void ata_reset(struct ata_softc *, int32_t *);
|
|
int32_t ata_reinit(struct ata_softc *);
|
|
int32_t ata_wait(struct ata_softc *, int32_t, u_int8_t);
|
|
int32_t ata_command(struct ata_softc *, int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, int32_t);
|
|
int ata_printf(struct ata_softc *, int32_t, const char *, ...) __printflike(3, 4);
|
|
int ata_get_lun(u_int32_t *);
|
|
void ata_free_lun(u_int32_t *, int);
|
|
int8_t *ata_mode2str(int32_t);
|
|
int8_t ata_pio2mode(int32_t);
|
|
int ata_pmode(struct ata_params *);
|
|
int ata_wmode(struct ata_params *);
|
|
int ata_umode(struct ata_params *);
|
|
|
|
void ata_dmainit(struct ata_softc *, int32_t, int32_t, int32_t, int32_t);
|
|
int32_t ata_dmasetup(struct ata_softc *, int32_t, int8_t *, int32_t, int32_t);
|
|
void ata_dmastart(struct ata_softc *);
|
|
int32_t ata_dmastatus(struct ata_softc *);
|
|
int32_t ata_dmadone(struct ata_softc *);
|