freebsd-skq/sys/mips/idt/idt_machdep.c
Oleksandr Tymoshenko bd01e50ca0 - dump_avail layout should be sequence of [start, end)
pairs, not <start, size>.

Spotted by: alc@
2010-12-09 07:47:40 +00:00

205 lines
4.6 KiB
C

/*-
* Copyright (C) 2007 by Oleksandr Tymoshenko. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR HIS RELATIVES BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF MIND, USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: $
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/imgact.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/cons.h>
#include <sys/exec.h>
#include <sys/ucontext.h>
#include <sys/proc.h>
#include <sys/kdb.h>
#include <sys/ptrace.h>
#include <sys/reboot.h>
#include <sys/signalvar.h>
#include <sys/sysent.h>
#include <sys/sysproto.h>
#include <sys/user.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <machine/cache.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cpuinfo.h>
#include <machine/cpufunc.h>
#include <machine/cpuregs.h>
#include <machine/hwfunc.h>
#include <machine/intr_machdep.h>
#include <machine/locore.h>
#include <machine/md_var.h>
#include <machine/pte.h>
#include <machine/sigframe.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
extern int *edata;
extern int *end;
void
platform_cpu_init()
{
/* Nothing special */
}
void
platform_halt(void)
{
}
void
platform_identify(void)
{
}
void
platform_reset(void)
{
volatile unsigned int * p = (void *)0xb8008000;
/*
* TODO: we should take care of TLB stuff here. Otherwise
* board does not boots properly next time
*/
/* Write 0x8000_0001 to the Reset register */
*p = 0x80000001;
__asm __volatile("li $25, 0xbfc00000");
__asm __volatile("j $25");
}
void
platform_trap_enter(void)
{
}
void
platform_trap_exit(void)
{
}
void
platform_start(__register_t a0, __register_t a1,
__register_t a2 __unused, __register_t a3 __unused)
{
uint64_t platform_counter_freq;
vm_offset_t kernend;
int argc = a0;
char **argv = (char **)a1;
int i, mem;
/* clear the BSS and SBSS segments */
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
/*
* Looking for mem=XXM argument
*/
mem = 0; /* Just something to start with */
for (i=0; i < argc; i++) {
if (strncmp(argv[i], "mem=", 4) == 0) {
mem = strtol(argv[i] + 4, NULL, 0);
break;
}
}
bootverbose = 1;
if (mem > 0)
realmem = btoc(mem << 20);
else
realmem = btoc(32 << 20);
for (i = 0; i < 10; i++) {
phys_avail[i] = 0;
}
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
phys_avail[1] = ctob(realmem);
dump_avail[0] = phys_avail[0];
dump_avail[1] = phys_avail[1];
physmem = realmem;
/*
* ns8250 uart code uses DELAY so ticker should be inititalized
* before cninit. And tick_init_params refers to hz, so * init_param1
* should be called first.
*/
init_param1();
/* TODO: parse argc,argv */
platform_counter_freq = 330000000UL;
mips_timer_init_params(platform_counter_freq, 1);
cninit();
/* Panic here, after cninit */
if (mem == 0)
panic("No mem=XX parameter in arguments");
printf("cmd line: ");
for (i=0; i < argc; i++)
printf("%s ", argv[i]);
printf("\n");
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}