freebsd-skq/sys/sparc64/fhc/clkbrd.c
Marius Strobl be7a88bd72 Add a driver for the 'clock-board' device (the clock board is an
inevitable component in Sun Exx00 machines and provides serial ports,
NVRAM and TOD amongst others which are handled by uart(4) and eeprom(4)
respectively). This driver currently only prints out information about
the chassis on attach and allows to blink the 'Cycling' LED (which is
duplicated on the front panel) of the clock board just like fhc(4) does
for the other boards. The device name for the LED is /dev/led/clockboard.

Obtained from:	OpenBSD
Tested by:	joerg
2005-03-19 01:04:48 +00:00

213 lines
5.3 KiB
C

/*-
* Copyright (c) 2004 Jason L. Wright (jason@thought.net)
* Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* from: OpenBSD: clkbrd.c,v 1.5 2004/10/01 18:18:49 jason Exp
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <dev/led/led.h>
#include <dev/ofw/ofw_bus.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sparc64/fhc/clkbrdreg.h>
#define CLKBRD_NREG 3
#define CLKBRD_CF 0
#define CLKBRD_CLK 1
#define CLKBRD_CLKVER 2
struct clkbrd_softc {
struct device *sc_dev;
struct resource *sc_res[CLKBRD_NREG];
int sc_rid[CLKBRD_NREG];
bus_space_tag_t sc_bt[CLKBRD_NREG];
bus_space_handle_t sc_bh[CLKBRD_NREG];
uint8_t sc_clk_ctrl;
struct cdev *sc_led_dev;
int sc_flags;
#define CLKBRD_HAS_CLKVER (1 << 0)
};
static devclass_t clkbrd_devclass;
static device_probe_t clkbrd_probe;
static device_attach_t clkbrd_attach;
static device_detach_t clkbrd_detach;
static void clkbrd_free_resources(struct clkbrd_softc *);
static void clkbrd_led_func(void *, int);
static device_method_t clkbrd_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, clkbrd_probe),
DEVMETHOD(device_attach, clkbrd_attach),
DEVMETHOD(device_detach, clkbrd_detach),
{ 0, 0 }
};
static driver_t clkbrd_driver = {
"clkbrd",
clkbrd_methods,
sizeof(struct clkbrd_softc),
};
DRIVER_MODULE(clkbrd, fhc, clkbrd_driver, clkbrd_devclass, 0, 0);
static int
clkbrd_probe(device_t dev)
{
if (strcmp(ofw_bus_get_name(dev), "clock-board") == 0) {
device_set_desc(dev, "Clock Board");
return (0);
}
return (ENXIO);
}
static int
clkbrd_attach(device_t dev)
{
struct clkbrd_softc *sc;
int i, slots;
uint8_t r;
sc = device_get_softc(dev);
bzero(sc, sizeof(struct clkbrd_softc));
sc->sc_dev = dev;
for (i = CLKBRD_CF; i <= CLKBRD_CLKVER; i++) {
sc->sc_rid[i] = i;
sc->sc_res[i] = bus_alloc_resource_any(sc->sc_dev,
SYS_RES_MEMORY, &sc->sc_rid[i], RF_ACTIVE);
if (sc->sc_res[i] == NULL) {
if (i != CLKBRD_CLKVER) {
device_printf(sc->sc_dev,
"could not allocate resource %d\n", i);
goto fail;
}
continue;
}
sc->sc_bt[i] = rman_get_bustag(sc->sc_res[i]);
sc->sc_bh[i] = rman_get_bushandle(sc->sc_res[i]);
if (i == CLKBRD_CLKVER)
sc->sc_flags |= CLKBRD_HAS_CLKVER;
}
slots = 4;
r = bus_space_read_1(sc->sc_bt[CLKBRD_CLK], sc->sc_bh[CLKBRD_CLK],
CLK_STS1);
switch (r & 0xc0) {
case 0x40:
slots = 16;
break;
case 0xc0:
slots = 8;
break;
case 0x80:
if (sc->sc_flags & CLKBRD_HAS_CLKVER) {
r = bus_space_read_1(sc->sc_bt[CLKBRD_CLKVER],
sc->sc_bh[CLKBRD_CLKVER], 0);
if (r != 0 && (r & 0x80) == 0)
slots = 5;
}
}
device_printf(sc->sc_dev, "Sun Enterprise Exx00 machine: %d slots\n",
slots);
sc->sc_clk_ctrl = bus_space_read_1(sc->sc_bt[CLKBRD_CLK],
sc->sc_bh[CLKBRD_CLK], CLK_CTRL);
sc->sc_led_dev = led_create(clkbrd_led_func, sc, "clockboard");
return (0);
fail:
clkbrd_free_resources(sc);
return (ENXIO);
}
static int
clkbrd_detach(device_t dev)
{
struct clkbrd_softc *sc;
sc = device_get_softc(dev);
led_destroy(sc->sc_led_dev);
bus_space_write_1(sc->sc_bt[CLKBRD_CLK], sc->sc_bh[CLKBRD_CLK],
CLK_CTRL, sc->sc_clk_ctrl);
bus_space_read_1(sc->sc_bt[CLKBRD_CLK], sc->sc_bh[CLKBRD_CLK],
CLK_CTRL);
clkbrd_free_resources(sc);
return (0);
}
static void
clkbrd_free_resources(struct clkbrd_softc *sc)
{
int i;
for (i = CLKBRD_CF; i <= CLKBRD_CLKVER; i++)
if (sc->sc_res[i] != NULL)
bus_release_resource(sc->sc_dev, SYS_RES_MEMORY,
sc->sc_rid[i], sc->sc_res[i]);
}
static void
clkbrd_led_func(void *arg, int onoff)
{
struct clkbrd_softc *sc;
uint8_t r;
sc = (struct clkbrd_softc *)arg;
r = bus_space_read_1(sc->sc_bt[CLKBRD_CLK], sc->sc_bh[CLKBRD_CLK],
CLK_CTRL);
if (onoff)
r |= CLK_CTRL_RLED;
else
r &= ~CLK_CTRL_RLED;
bus_space_write_1(sc->sc_bt[CLKBRD_CLK], sc->sc_bh[CLKBRD_CLK],
CLK_CTRL, r);
bus_space_read_1(sc->sc_bt[CLKBRD_CLK], sc->sc_bh[CLKBRD_CLK],
CLK_CTRL);
}