7137cea0c7
controllers. ICH based controllers are treated as 82559. 82557, earlier revision of 82558 and 82559ER have no WOL capability. o WOL support requires help of a firmware so add check whether hardware is capable of handling magic frames by reading EEPROM. o Enable accepting WOL frames only when hardware is about to suspend or shutdown. Previously fxp(4) used to allow receipt of magic frame under normal operation mode which could cause hardware hang if magic frame is received by hardware. Datasheet clearly states driver should not allow WOL frames under normal operation mode. o Disable WOL frame reception in device attach so have fxp(4) immunize against system hang which can be triggered by magic packets when the hardware is not in fully initialized state. o Don't reset all hardware configuration data in fxp_stop() otherwise important configuration data is lost and this would reset WOL configuration to default state which in turn cause hardware hang on receipt of magic frames. To fix the issue, preserve hardware configuration data by issuing a selective reset. o Explicitly disable interrupts after issuing selective reset as reset may unmask interrupts. Tested by: Alexey Shuvaev < shuvaev <> physik DOT uni-wuerzburg DOT de > |
||
|---|---|---|
| .. | ||
| if_fxp.c | ||
| if_fxpreg.h | ||
| if_fxpvar.h | ||
| rcvbundl.h | ||