e8cb4d4bf4
Oppv2 add more flexibility on regulator value for the core voltage amongst other new thing. For now only shared opp table is supported as I don't have hardware with non-shared opp table. Tested-On: OrangePi One (with oppv1 and oppv2) Tested-On: Pine64-LTS
525 lines
12 KiB
C
525 lines
12 KiB
C
/*-
|
|
* Copyright (c) 2018 Emmanuel Vadot <manu@FreeBSD.Org>
|
|
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Generic DT based cpufreq driver
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/cpu.h>
|
|
#include <sys/cpuset.h>
|
|
#include <sys/smp.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <dev/extres/clk/clk.h>
|
|
#include <dev/extres/regulator/regulator.h>
|
|
|
|
#include "cpufreq_if.h"
|
|
|
|
#if 0
|
|
#define DEBUG(dev, msg...) device_printf(dev, "cpufreq_dt: " msg);
|
|
#else
|
|
#define DEBUG(dev, msg...)
|
|
#endif
|
|
|
|
enum opp_version {
|
|
OPP_V1 = 1,
|
|
OPP_V2,
|
|
};
|
|
|
|
struct cpufreq_dt_opp {
|
|
uint64_t freq;
|
|
uint32_t uvolt_target;
|
|
uint32_t uvolt_min;
|
|
uint32_t uvolt_max;
|
|
uint32_t uamps;
|
|
uint32_t clk_latency;
|
|
bool turbo_mode;
|
|
bool opp_suspend;
|
|
};
|
|
|
|
struct cpufreq_dt_softc {
|
|
device_t dev;
|
|
clk_t clk;
|
|
regulator_t reg;
|
|
|
|
struct cpufreq_dt_opp *opp;
|
|
ssize_t nopp;
|
|
|
|
cpuset_t cpus;
|
|
};
|
|
|
|
static void
|
|
cpufreq_dt_notify(device_t dev, uint64_t freq)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
struct pcpu *pc;
|
|
int cpu;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
CPU_FOREACH(cpu) {
|
|
if (CPU_ISSET(cpu, &sc->cpus)) {
|
|
pc = pcpu_find(cpu);
|
|
pc->pc_clock = freq;
|
|
}
|
|
}
|
|
}
|
|
|
|
static const struct cpufreq_dt_opp *
|
|
cpufreq_dt_find_opp(device_t dev, uint64_t freq)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
ssize_t n;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
DEBUG(dev, "Looking for freq %ju\n", freq);
|
|
for (n = 0; n < sc->nopp; n++)
|
|
if (CPUFREQ_CMP(sc->opp[n].freq, freq))
|
|
return (&sc->opp[n]);
|
|
|
|
DEBUG(dev, "Couldn't find one\n");
|
|
return (NULL);
|
|
}
|
|
|
|
static void
|
|
cpufreq_dt_opp_to_setting(device_t dev, const struct cpufreq_dt_opp *opp,
|
|
struct cf_setting *set)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
memset(set, 0, sizeof(*set));
|
|
set->freq = opp->freq / 1000000;
|
|
set->volts = opp->uvolt_target / 1000;
|
|
set->power = CPUFREQ_VAL_UNKNOWN;
|
|
set->lat = opp->clk_latency;
|
|
set->dev = dev;
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_get(device_t dev, struct cf_setting *set)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
const struct cpufreq_dt_opp *opp;
|
|
uint64_t freq;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
DEBUG(dev, "cpufreq_dt_get\n");
|
|
if (clk_get_freq(sc->clk, &freq) != 0)
|
|
return (ENXIO);
|
|
|
|
opp = cpufreq_dt_find_opp(dev, freq);
|
|
if (opp == NULL) {
|
|
device_printf(dev, "Can't find the current freq in opp\n");
|
|
return (ENOENT);
|
|
}
|
|
|
|
cpufreq_dt_opp_to_setting(dev, opp, set);
|
|
|
|
DEBUG(dev, "Current freq %dMhz\n", set->freq);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_set(device_t dev, const struct cf_setting *set)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
const struct cpufreq_dt_opp *opp, *copp;
|
|
uint64_t freq;
|
|
int error = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (clk_get_freq(sc->clk, &freq) != 0) {
|
|
device_printf(dev, "Can't get current clk freq\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
DEBUG(sc->dev, "Current freq %ju\n", freq);
|
|
DEBUG(sc->dev, "Target freq %ju\n", (uint64_t)set->freq * 1000000);
|
|
copp = cpufreq_dt_find_opp(sc->dev, freq);
|
|
if (copp == NULL) {
|
|
device_printf(dev, "Can't find the current freq in opp\n");
|
|
return (ENOENT);
|
|
}
|
|
opp = cpufreq_dt_find_opp(sc->dev, set->freq * 1000000);
|
|
if (opp == NULL) {
|
|
device_printf(dev, "Couldn't find an opp for this freq\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (copp->uvolt_target < opp->uvolt_target) {
|
|
DEBUG(dev, "Changing regulator from %u to %u\n",
|
|
copp->uvolt_target, opp->uvolt_target);
|
|
error = regulator_set_voltage(sc->reg,
|
|
opp->uvolt_min,
|
|
opp->uvolt_max);
|
|
if (error != 0) {
|
|
DEBUG(dev, "Failed, backout\n");
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
DEBUG(dev, "Setting clk to %ju\n", opp->freq);
|
|
error = clk_set_freq(sc->clk, opp->freq, 0);
|
|
if (error != 0) {
|
|
DEBUG(dev, "Failed, backout\n");
|
|
/* Restore previous voltage (best effort) */
|
|
error = regulator_set_voltage(sc->reg,
|
|
copp->uvolt_min,
|
|
copp->uvolt_max);
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (copp->uvolt_target > opp->uvolt_target) {
|
|
error = regulator_set_voltage(sc->reg,
|
|
opp->uvolt_min,
|
|
opp->uvolt_max);
|
|
if (error != 0) {
|
|
DEBUG(dev, "Failed to switch regulator to %d\n",
|
|
opp->uvolt_target);
|
|
/* Restore previous CPU frequency (best effort) */
|
|
(void)clk_set_freq(sc->clk,
|
|
copp->freq, 0);
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
if (clk_get_freq(sc->clk, &freq) == 0)
|
|
cpufreq_dt_notify(dev, freq);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
static int
|
|
cpufreq_dt_type(device_t dev, int *type)
|
|
{
|
|
if (type == NULL)
|
|
return (EINVAL);
|
|
|
|
*type = CPUFREQ_TYPE_ABSOLUTE;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_settings(device_t dev, struct cf_setting *sets, int *count)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
ssize_t n;
|
|
|
|
DEBUG(dev, "cpufreq_dt_settings\n");
|
|
if (sets == NULL || count == NULL)
|
|
return (EINVAL);
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (*count < sc->nopp) {
|
|
*count = (int)sc->nopp;
|
|
return (E2BIG);
|
|
}
|
|
|
|
for (n = 0; n < sc->nopp; n++)
|
|
cpufreq_dt_opp_to_setting(dev, &sc->opp[n], &sets[n]);
|
|
|
|
*count = (int)sc->nopp;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
cpufreq_dt_identify(driver_t *driver, device_t parent)
|
|
{
|
|
phandle_t node;
|
|
|
|
/* Properties must be listed under node /cpus/cpu@0 */
|
|
node = ofw_bus_get_node(parent);
|
|
|
|
/* The cpu@0 node must have the following properties */
|
|
if (!OF_hasprop(node, "clocks") ||
|
|
!OF_hasprop(node, "cpu-supply"))
|
|
return;
|
|
|
|
if (!OF_hasprop(node, "operating-points") &&
|
|
!OF_hasprop(node, "operating-points-v2"))
|
|
return;
|
|
|
|
if (device_find_child(parent, "cpufreq_dt", -1) != NULL)
|
|
return;
|
|
|
|
if (BUS_ADD_CHILD(parent, 0, "cpufreq_dt", -1) == NULL)
|
|
device_printf(parent, "add cpufreq_dt child failed\n");
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_probe(device_t dev)
|
|
{
|
|
phandle_t node;
|
|
|
|
node = ofw_bus_get_node(device_get_parent(dev));
|
|
|
|
if (!OF_hasprop(node, "clocks") ||
|
|
!OF_hasprop(node, "cpu-supply"))
|
|
return (ENXIO);
|
|
|
|
if (!OF_hasprop(node, "operating-points") &&
|
|
!OF_hasprop(node, "operating-points-v2"))
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Generic cpufreq driver");
|
|
return (BUS_PROBE_GENERIC);
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_oppv1_parse(struct cpufreq_dt_softc *sc, phandle_t node)
|
|
{
|
|
uint32_t *opp, lat;
|
|
ssize_t n;
|
|
|
|
sc->nopp = OF_getencprop_alloc_multi(node, "operating-points",
|
|
sizeof(uint32_t) * 2, (void **)&opp);
|
|
if (sc->nopp == -1)
|
|
return (ENXIO);
|
|
|
|
if (OF_getencprop(node, "clock-latency", &lat, sizeof(lat)) == -1)
|
|
lat = CPUFREQ_VAL_UNKNOWN;
|
|
|
|
sc->opp = malloc(sizeof(*sc->opp) * sc->nopp, M_DEVBUF, M_WAITOK);
|
|
|
|
for (n = 0; n < sc->nopp; n++) {
|
|
sc->opp[n].freq = opp[n * 2 + 0] * 1000;
|
|
sc->opp[n].uvolt_min = opp[n * 2 + 1];
|
|
sc->opp[n].uvolt_max = sc->opp[n].uvolt_min;
|
|
sc->opp[n].uvolt_target = sc->opp[n].uvolt_min;
|
|
sc->opp[n].clk_latency = lat;
|
|
|
|
if (bootverbose)
|
|
device_printf(sc->dev, "%ju.%03ju MHz, %u uV\n",
|
|
sc->opp[n].freq / 1000000,
|
|
sc->opp[n].freq % 1000000,
|
|
sc->opp[n].uvolt_target);
|
|
}
|
|
free(opp, M_OFWPROP);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_oppv2_parse(struct cpufreq_dt_softc *sc, phandle_t node)
|
|
{
|
|
phandle_t opp, opp_table, opp_xref;
|
|
pcell_t cell[2];
|
|
uint32_t *volts, lat;
|
|
int nvolt, i;
|
|
|
|
if (OF_getencprop(node, "operating-points-v2", &opp_xref,
|
|
sizeof(opp_xref)) == -1) {
|
|
device_printf(sc->dev, "Cannot get xref to oppv2 table\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
opp_table = OF_node_from_xref(opp_xref);
|
|
if (opp_table == opp_xref)
|
|
return (ENXIO);
|
|
|
|
if (!OF_hasprop(opp_table, "opp-shared")) {
|
|
device_printf(sc->dev, "Only opp-shared is supported\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
for (opp = OF_child(opp_table); opp > 0; opp = OF_peer(opp))
|
|
sc->nopp += 1;
|
|
|
|
sc->opp = malloc(sizeof(*sc->opp) * sc->nopp, M_DEVBUF, M_WAITOK);
|
|
|
|
for (i = 0, opp_table = OF_child(opp_table); opp_table > 0;
|
|
opp_table = OF_peer(opp_table), i++) {
|
|
/* opp-hz is a required property */
|
|
if (OF_getencprop(opp_table, "opp-hz", cell,
|
|
sizeof(cell)) == -1)
|
|
continue;
|
|
|
|
sc->opp[i].freq = cell[0];
|
|
sc->opp[i].freq <<= 32;
|
|
sc->opp[i].freq |= cell[1];
|
|
|
|
if (OF_getencprop(opp_table, "clock-latency", &lat,
|
|
sizeof(lat)) == -1)
|
|
sc->opp[i].clk_latency = CPUFREQ_VAL_UNKNOWN;
|
|
else
|
|
sc->opp[i].clk_latency = (int)lat;
|
|
|
|
if (OF_hasprop(opp_table, "turbo-mode"))
|
|
sc->opp[i].turbo_mode = true;
|
|
if (OF_hasprop(opp_table, "opp-suspend"))
|
|
sc->opp[i].opp_suspend = true;
|
|
|
|
nvolt = OF_getencprop_alloc_multi(opp_table, "opp-microvolt",
|
|
sizeof(*volts), (void **)&volts);
|
|
if (nvolt == 1) {
|
|
sc->opp[i].uvolt_target = volts[0];
|
|
sc->opp[i].uvolt_min = volts[0];
|
|
sc->opp[i].uvolt_max = volts[0];
|
|
} else if (nvolt == 3) {
|
|
sc->opp[i].uvolt_target = volts[0];
|
|
sc->opp[i].uvolt_min = volts[1];
|
|
sc->opp[i].uvolt_max = volts[2];
|
|
} else {
|
|
device_printf(sc->dev,
|
|
"Wrong count of opp-microvolt property\n");
|
|
OF_prop_free(volts);
|
|
free(sc->opp, M_DEVBUF);
|
|
return (ENXIO);
|
|
}
|
|
OF_prop_free(volts);
|
|
|
|
if (bootverbose)
|
|
device_printf(sc->dev, "%ju.%03ju Mhz (%u uV)\n",
|
|
sc->opp[i].freq / 1000000,
|
|
sc->opp[i].freq % 1000000,
|
|
sc->opp[i].uvolt_target);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cpufreq_dt_attach(device_t dev)
|
|
{
|
|
struct cpufreq_dt_softc *sc;
|
|
phandle_t node;
|
|
phandle_t cnode, opp, copp;
|
|
int cpu;
|
|
uint64_t freq;
|
|
int rv = 0;
|
|
enum opp_version version;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
node = ofw_bus_get_node(device_get_parent(dev));
|
|
|
|
if (regulator_get_by_ofw_property(dev, node,
|
|
"cpu-supply", &sc->reg) != 0) {
|
|
device_printf(dev, "no regulator for %s\n",
|
|
ofw_bus_get_name(device_get_parent(dev)));
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (clk_get_by_ofw_index(dev, node, 0, &sc->clk) != 0) {
|
|
device_printf(dev, "no clock for %s\n",
|
|
ofw_bus_get_name(device_get_parent(dev)));
|
|
regulator_release(sc->reg);
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (OF_hasprop(node, "operating-points")) {
|
|
version = OPP_V1;
|
|
rv = cpufreq_dt_oppv1_parse(sc, node);
|
|
if (rv != 0) {
|
|
device_printf(dev, "Failed to parse opp-v1 table\n");
|
|
return (rv);
|
|
}
|
|
OF_getencprop(node, "operating-points", &opp,
|
|
sizeof(opp));
|
|
} else {
|
|
version = OPP_V2;
|
|
rv = cpufreq_dt_oppv2_parse(sc, node);
|
|
if (rv != 0) {
|
|
device_printf(dev, "Failed to parse opp-v2 table\n");
|
|
return (rv);
|
|
}
|
|
OF_getencprop(node, "operating-points-v2", &opp,
|
|
sizeof(opp));
|
|
}
|
|
|
|
/*
|
|
* Find all CPUs that share the same opp table
|
|
*/
|
|
CPU_ZERO(&sc->cpus);
|
|
cpu = device_get_unit(device_get_parent(dev));
|
|
for (cnode = node; cnode > 0; cnode = OF_peer(cnode), cpu++) {
|
|
copp = -1;
|
|
if (version == OPP_V1)
|
|
OF_getencprop(cnode, "operating-points", &copp,
|
|
sizeof(copp));
|
|
else if (version == OPP_V2)
|
|
OF_getencprop(cnode, "operating-points-v2",
|
|
&copp, sizeof(copp));
|
|
if (opp == copp)
|
|
CPU_SET(cpu, &sc->cpus);
|
|
}
|
|
|
|
if (clk_get_freq(sc->clk, &freq) == 0)
|
|
cpufreq_dt_notify(dev, freq);
|
|
|
|
cpufreq_register(dev);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
static device_method_t cpufreq_dt_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, cpufreq_dt_identify),
|
|
DEVMETHOD(device_probe, cpufreq_dt_probe),
|
|
DEVMETHOD(device_attach, cpufreq_dt_attach),
|
|
|
|
/* cpufreq interface */
|
|
DEVMETHOD(cpufreq_drv_get, cpufreq_dt_get),
|
|
DEVMETHOD(cpufreq_drv_set, cpufreq_dt_set),
|
|
DEVMETHOD(cpufreq_drv_type, cpufreq_dt_type),
|
|
DEVMETHOD(cpufreq_drv_settings, cpufreq_dt_settings),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t cpufreq_dt_driver = {
|
|
"cpufreq_dt",
|
|
cpufreq_dt_methods,
|
|
sizeof(struct cpufreq_dt_softc),
|
|
};
|
|
|
|
static devclass_t cpufreq_dt_devclass;
|
|
|
|
DRIVER_MODULE(cpufreq_dt, cpu, cpufreq_dt_driver, cpufreq_dt_devclass, 0, 0);
|
|
MODULE_VERSION(cpufreq_dt, 1);
|