549 lines
16 KiB
C
549 lines
16 KiB
C
/*-
|
|
* Copyright (c) 2000,2001 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_global.h"
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/cons.h>
|
|
#include <machine/bus.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
#include <dev/ata/ata-raid.h>
|
|
|
|
/* device structures */
|
|
static d_open_t aropen;
|
|
static d_strategy_t arstrategy;
|
|
static struct cdevsw ar_cdevsw = {
|
|
/* open */ aropen,
|
|
/* close */ nullclose,
|
|
/* read */ physread,
|
|
/* write */ physwrite,
|
|
/* ioctl */ noioctl,
|
|
/* poll */ nopoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ arstrategy,
|
|
/* name */ "ar",
|
|
/* maj */ 157,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ D_DISK,
|
|
/* bmaj */ -1
|
|
};
|
|
static struct cdevsw ardisk_cdevsw;
|
|
|
|
/* prototypes */
|
|
static void ar_attach(struct ar_softc *);
|
|
static void ar_done(struct bio *);
|
|
static int ar_highpoint_conf(struct ad_softc *, struct ar_softc **);
|
|
static int ar_promise_conf(struct ad_softc *, struct ar_softc **);
|
|
static int ar_read(struct ad_softc *, u_int32_t, int, char *);
|
|
|
|
/* internal vars */
|
|
static int ar_init = 0;
|
|
static struct ar_softc *ar_table[8];
|
|
static MALLOC_DEFINE(M_AR, "AR driver", "ATA RAID driver");
|
|
|
|
/* defines */
|
|
#define PRINT_AD(adp) \
|
|
printf(" ad%d: %luMB <%.40s> [%d/%d/%d] at ata%d-%s %s%s\n", \
|
|
adp->lun, adp->total_secs / ((1024L * 1024L) / DEV_BSIZE), \
|
|
adp->controller->dev_param[ATA_DEV(adp->unit)]->model, \
|
|
adp->total_secs / (adp->heads * adp->sectors), \
|
|
adp->heads, adp->sectors, device_get_unit(adp->controller->dev),\
|
|
(adp->unit == ATA_MASTER) ? "master" : "slave", \
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "", \
|
|
ata_mode2str(adp->controller->mode[ATA_DEV(adp->unit)]))
|
|
|
|
int
|
|
ar_probe(struct ad_softc *adp)
|
|
{
|
|
if (!ar_init) {
|
|
bzero(&ar_table, sizeof(ar_table));
|
|
ar_init = 1;
|
|
}
|
|
|
|
switch(adp->controller->chiptype) {
|
|
case 0x4d33105a:
|
|
case 0x4d38105a:
|
|
case 0x4d30105a:
|
|
case 0x0d30105a:
|
|
return (ar_promise_conf(adp, ar_table));
|
|
|
|
case 0x00041103:
|
|
return (ar_highpoint_conf(adp, ar_table));
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
ar_attach(struct ar_softc *raid)
|
|
{
|
|
dev_t dev;
|
|
int i;
|
|
|
|
printf("ar%d: %luMB <ATA ",
|
|
raid->lun, raid->total_secs / ((1024L * 1024L) / DEV_BSIZE));
|
|
switch (raid->flags & (AR_F_RAID_0 | AR_F_RAID_1 | AR_F_SPAN)) {
|
|
case AR_F_RAID_0:
|
|
printf("RAID0 "); break;
|
|
case AR_F_RAID_1:
|
|
printf("RAID1 "); break;
|
|
case AR_F_SPAN:
|
|
printf("SPAN "); break;
|
|
case (AR_F_RAID_0 | AR_F_RAID_1):
|
|
printf("RAID0+1 "); break;
|
|
default:
|
|
printf("unknown array 0x%x ", raid->flags);
|
|
return;
|
|
}
|
|
printf("array> [%d/%d/%d] subdisks:\n",
|
|
raid->cylinders, raid->heads, raid->sectors);
|
|
for (i = 0; i < raid->num_subdisks; i++)
|
|
PRINT_AD(raid->subdisk[i]);
|
|
for (i = 0; i < raid->num_mirrordisks; i++)
|
|
PRINT_AD(raid->mirrordisk[i]);
|
|
|
|
dev = disk_create(raid->lun, &raid->disk, 0, &ar_cdevsw, &ardisk_cdevsw);
|
|
dev->si_drv1 = raid;
|
|
dev->si_iosize_max = 256 * DEV_BSIZE;
|
|
raid->dev = dev;
|
|
}
|
|
|
|
static int
|
|
aropen(dev_t dev, int flags, int fmt, struct proc *p)
|
|
{
|
|
struct ar_softc *rdp = dev->si_drv1;
|
|
struct disklabel *dl;
|
|
|
|
dl = &rdp->disk.d_label;
|
|
bzero(dl, sizeof *dl);
|
|
dl->d_secsize = DEV_BSIZE;
|
|
dl->d_nsectors = rdp->sectors;
|
|
dl->d_ntracks = rdp->heads;
|
|
dl->d_ncylinders = rdp->cylinders;
|
|
dl->d_secpercyl = rdp->sectors * rdp->heads;
|
|
dl->d_secperunit = rdp->total_secs;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
arstrategy(struct bio *bp)
|
|
{
|
|
struct ar_softc *rdp = bp->bio_dev->si_drv1;
|
|
int lba, count, chunk;
|
|
caddr_t data;
|
|
|
|
/* if it's a null transfer, return immediatly. */
|
|
if (bp->bio_bcount == 0) {
|
|
bp->bio_resid = 0;
|
|
biodone(bp);
|
|
return;
|
|
}
|
|
|
|
bp->bio_resid = bp->bio_bcount;
|
|
lba = bp->bio_pblkno;
|
|
data = bp->bio_data;
|
|
for (count = howmany(bp->bio_bcount, DEV_BSIZE); count > 0;
|
|
count -= chunk, lba += chunk, data += (chunk * DEV_BSIZE)) {
|
|
struct ar_buf *buf1, *buf2;
|
|
int plba;
|
|
|
|
buf1 = malloc(sizeof(struct ar_buf), M_AR, M_NOWAIT | M_ZERO);
|
|
if (rdp->flags & AR_F_SPAN) {
|
|
plba = lba;
|
|
while (plba >= (rdp->subdisk[buf1->drive]->total_secs-rdp->reserved)
|
|
&& buf1->drive < rdp->num_subdisks)
|
|
plba-=(rdp->subdisk[buf1->drive++]->total_secs-rdp->reserved);
|
|
buf1->bp.bio_pblkno = plba;
|
|
chunk = min(rdp->subdisk[buf1->drive]->total_secs -
|
|
rdp->reserved - plba, count);
|
|
}
|
|
else if (rdp->flags & AR_F_RAID_0) {
|
|
plba = lba / rdp->interleave;
|
|
chunk = lba % rdp->interleave;
|
|
buf1->drive = plba % rdp->num_subdisks;
|
|
buf1->bp.bio_pblkno =
|
|
((plba / rdp->num_subdisks) * rdp->interleave) + chunk;
|
|
chunk = min(rdp->interleave - chunk, count);
|
|
}
|
|
else {
|
|
buf1->bp.bio_pblkno = lba;
|
|
buf1->drive = 0;
|
|
chunk = count;
|
|
}
|
|
|
|
if (buf1->drive > 0)
|
|
buf1->bp.bio_pblkno += rdp->offset;
|
|
buf1->bp.bio_caller1 = (void *)rdp;
|
|
buf1->bp.bio_bcount = chunk * DEV_BSIZE;
|
|
buf1->bp.bio_data = data;
|
|
buf1->bp.bio_cmd = bp->bio_cmd;
|
|
buf1->bp.bio_flags = bp->bio_flags;
|
|
buf1->bp.bio_done = ar_done;
|
|
buf1->org = bp;
|
|
|
|
/* simpleminded load balancing on RAID1 arrays */
|
|
if (rdp->flags & AR_F_RAID_1 && bp->bio_cmd == BIO_READ) {
|
|
if (buf1->bp.bio_pblkno <
|
|
(rdp->last_lba[buf1->drive][rdp->last_disk] - 100) ||
|
|
buf1->bp.bio_pblkno >
|
|
(rdp->last_lba[buf1->drive][rdp->last_disk] + 100)) {
|
|
rdp->last_disk = 1 - rdp->last_disk;
|
|
rdp->last_lba[buf1->drive][rdp->last_disk] =
|
|
buf1->bp.bio_pblkno;
|
|
}
|
|
if (rdp->last_disk)
|
|
buf1->bp.bio_dev = rdp->mirrordisk[buf1->drive]->dev;
|
|
else
|
|
buf1->bp.bio_dev = rdp->subdisk[buf1->drive]->dev;
|
|
}
|
|
else
|
|
buf1->bp.bio_dev = rdp->subdisk[buf1->drive]->dev;
|
|
|
|
if (rdp->flags & AR_F_RAID_1 && bp->bio_cmd == BIO_WRITE) {
|
|
buf2 = malloc(sizeof(struct ar_buf), M_AR, M_NOWAIT);
|
|
bcopy(buf1, buf2, sizeof(struct ar_buf));
|
|
buf2->bp.bio_dev = rdp->mirrordisk[buf1->drive]->dev;
|
|
buf2->mirror = buf1;
|
|
buf1->mirror = buf2;
|
|
buf2->bp.bio_dev->si_disk->d_devsw->d_strategy((struct bio *)buf2);
|
|
}
|
|
buf1->bp.bio_dev->si_disk->d_devsw->d_strategy((struct bio *)buf1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar_done(struct bio *bp)
|
|
{
|
|
struct ar_softc *rdp = (struct ar_softc *)bp->bio_caller1;
|
|
struct ar_buf *buf = (struct ar_buf *)bp;
|
|
int s;
|
|
|
|
s = splbio();
|
|
|
|
if (bp->bio_flags & BIO_ERROR) {
|
|
if (bp->bio_cmd == BIO_WRITE || buf->done || !(rdp->flags&AR_F_RAID_1)){
|
|
buf->org->bio_flags |= BIO_ERROR;
|
|
buf->org->bio_error = bp->bio_error;
|
|
}
|
|
printf("ar%d: subdisk error\n", rdp->lun);
|
|
}
|
|
|
|
if (rdp->flags & AR_F_RAID_1) {
|
|
if (bp->bio_cmd == BIO_WRITE) {
|
|
if (!buf->done) {
|
|
buf->mirror->done = 1;
|
|
goto done;
|
|
}
|
|
}
|
|
else {
|
|
if (!buf->done && bp->bio_flags & BIO_ERROR) {
|
|
/* read error on this disk, try mirror */
|
|
buf->done = 1;
|
|
buf->bp.bio_dev = rdp->mirrordisk[buf->drive]->dev;
|
|
buf->bp.bio_dev->si_disk->d_devsw->d_strategy((struct bio*)buf);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
buf->org->bio_resid -= bp->bio_bcount;
|
|
if (buf->org->bio_resid == 0)
|
|
biodone(buf->org);
|
|
done:
|
|
free(buf, M_AR);
|
|
splx(s);
|
|
}
|
|
|
|
/* read the RAID info from a disk on a HighPoint controller */
|
|
static int
|
|
ar_highpoint_conf(struct ad_softc *adp, struct ar_softc **raidp)
|
|
{
|
|
struct highpoint_raid_conf info;
|
|
struct ar_softc *raid;
|
|
int array;
|
|
|
|
if (ar_read(adp, 0x09, DEV_BSIZE, (char *)&info)) {
|
|
if (bootverbose)
|
|
printf("HighPoint read conf failed\n");
|
|
return 1;
|
|
}
|
|
|
|
/* check if this is a HighPoint RAID struct */
|
|
if (info.magic != HPT_MAGIC_OK) {
|
|
if (bootverbose)
|
|
printf("HighPoint check1 failed\n");
|
|
return 1;
|
|
}
|
|
|
|
/* now convert HighPoint config info into our generic form */
|
|
for (array = 0; array < 8; array++) {
|
|
if (!raidp[array]) {
|
|
raidp[array] =
|
|
(struct ar_softc*)malloc(sizeof(struct ar_softc),M_AR,
|
|
M_NOWAIT | M_ZERO);
|
|
if (!raidp[array]) {
|
|
printf("ar: failed to allocate raid config storage\n");
|
|
return 1;
|
|
}
|
|
}
|
|
raid = raidp[array];
|
|
|
|
switch (info.type) {
|
|
case HPT_T_RAID_0:
|
|
/* check the order byte to determine what this really is */
|
|
switch (info.order & (HPT_O_MIRROR | HPT_O_STRIPE)) {
|
|
case HPT_O_MIRROR:
|
|
goto hpt_mirror;
|
|
|
|
case HPT_O_STRIPE:
|
|
if (raid->magic_0 && raid->magic_0 != info.magic_0)
|
|
continue;
|
|
raid->magic_0 = info.magic_0;
|
|
raid->flags |= (AR_F_RAID_0 | AR_F_RAID_1);
|
|
raid->interleave = 1 << info.raid0_shift;
|
|
raid->subdisk[info.disk_number] = adp;
|
|
raid->num_subdisks++;
|
|
if ((raid->num_subdisks + raid->num_mirrordisks) ==
|
|
(info.raid_disks * 2))
|
|
raid->flags |= AR_F_CONF_DONE;
|
|
break;
|
|
|
|
case (HPT_O_MIRROR | HPT_O_STRIPE):
|
|
if (raid->magic_1 && raid->magic_1 != info.magic_0)
|
|
continue;
|
|
raid->magic_1 = info.magic_0;
|
|
raid->flags |= (AR_F_RAID_0 | AR_F_RAID_1);
|
|
raid->mirrordisk[info.disk_number] = adp;
|
|
raid->num_mirrordisks++;
|
|
if ((raid->num_subdisks + raid->num_mirrordisks) ==
|
|
(info.raid_disks * 2))
|
|
raid->flags |= AR_F_CONF_DONE;
|
|
break;
|
|
|
|
default:
|
|
if (raid->magic_0 && raid->magic_0 != info.magic_0)
|
|
continue;
|
|
raid->magic_0 = info.magic_0;
|
|
raid->flags |= AR_F_RAID_0;
|
|
raid->interleave = 1 << info.raid0_shift;
|
|
raid->subdisk[info.disk_number] = adp;
|
|
raid->num_subdisks++;
|
|
if (raid->num_subdisks == info.raid_disks)
|
|
raid->flags |= AR_F_CONF_DONE;
|
|
}
|
|
break;
|
|
|
|
case HPT_T_RAID_1:
|
|
hpt_mirror:
|
|
if (raid->magic_0 && raid->magic_0 != info.magic_0)
|
|
continue;
|
|
raid->magic_0 = info.magic_0;
|
|
raid->flags |= AR_F_RAID_1;
|
|
if (info.disk_number == 0 && raid->num_subdisks == 0) {
|
|
raid->subdisk[raid->num_subdisks] = adp;
|
|
raid->num_subdisks = 1;
|
|
}
|
|
if (info.disk_number != 0 && raid->num_mirrordisks == 0) {
|
|
raid->mirrordisk[raid->num_mirrordisks] = adp;
|
|
raid->num_mirrordisks = 1;
|
|
}
|
|
if ((raid->num_subdisks +
|
|
raid->num_mirrordisks) == (info.raid_disks * 2))
|
|
raid->flags |= AR_F_CONF_DONE;
|
|
break;
|
|
|
|
case HPT_T_SPAN:
|
|
if (raid->magic_0 && raid->magic_0 != info.magic_0)
|
|
continue;
|
|
raid->magic_0 = info.magic_0;
|
|
raid->flags |= AR_F_SPAN;
|
|
raid->subdisk[info.disk_number] = adp;
|
|
raid->num_subdisks++;
|
|
if (raid->num_subdisks == info.raid_disks)
|
|
raid->flags |= AR_F_CONF_DONE;
|
|
break;
|
|
|
|
default:
|
|
printf("HighPoint unknown RAID type 0x%02x\n", info.type);
|
|
}
|
|
|
|
/* do we have a complete array to attach to ? */
|
|
if (raid->flags & AR_F_CONF_DONE) {
|
|
raid->lun = array;
|
|
raid->heads = 255;
|
|
raid->sectors = 63;
|
|
raid->cylinders = (info.total_secs - 9) / (63 * 255);
|
|
raid->total_secs = info.total_secs - (9 * raid->num_subdisks);
|
|
raid->offset = 10;
|
|
raid->reserved = 10;
|
|
ar_attach(raid);
|
|
}
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* read the RAID info from a disk on a Promise Fasttrak controller */
|
|
static int
|
|
ar_promise_conf(struct ad_softc *adp, struct ar_softc **raidp)
|
|
{
|
|
struct promise_raid_conf info;
|
|
struct ar_softc *raid;
|
|
u_int32_t lba, magic;
|
|
u_int32_t cksum, *ckptr;
|
|
int count, disk_number, array;
|
|
|
|
lba = ((adp->total_secs / (adp->heads * adp->sectors)) *
|
|
adp->heads * adp->sectors) - adp->sectors;
|
|
|
|
if (ar_read(adp, lba, 4 * DEV_BSIZE, (char *)&info)) {
|
|
if (bootverbose)
|
|
printf("Promise read conf failed\n");
|
|
return 1;
|
|
}
|
|
|
|
/* check if this is a Promise RAID struct */
|
|
if (strncmp(info.promise_id, PR_MAGIC, sizeof(PR_MAGIC))) {
|
|
if (bootverbose)
|
|
printf("Promise check1 failed\n");
|
|
return 1;
|
|
}
|
|
|
|
/* check if the checksum is OK */
|
|
for (cksum = 0, ckptr = (int32_t *)&info, count = 0; count < 511; count++)
|
|
cksum += *ckptr++;
|
|
if (cksum != *ckptr) {
|
|
if (bootverbose)
|
|
printf("Promise check2 failed\n");
|
|
return 1;
|
|
}
|
|
|
|
/* now convert Promise config info into our generic form */
|
|
if ((info.raid.flags != PR_F_CONFED) ||
|
|
(((info.raid.status & (PR_S_DEFINED|PR_S_ONLINE)) !=
|
|
(PR_S_DEFINED|PR_S_ONLINE)))) {
|
|
return 1;
|
|
}
|
|
|
|
magic = (adp->controller->chiptype >> 16) | info.raid.array_number << 16;
|
|
|
|
array = info.raid.array_number;
|
|
if (raidp[array]) {
|
|
if (magic != raidp[array]->magic_0)
|
|
return 1;
|
|
}
|
|
else {
|
|
if (!(raidp[array] = (struct ar_softc *)
|
|
malloc(sizeof(struct ar_softc), M_AR, M_NOWAIT))) {
|
|
printf("ar: failed to allocate raid config storage\n");
|
|
return 1;
|
|
}
|
|
else
|
|
bzero(raidp[array], sizeof(struct ar_softc));
|
|
}
|
|
raid = raidp[array];
|
|
raid->magic_0 = magic;
|
|
|
|
switch (info.raid.type) {
|
|
case PR_T_STRIPE:
|
|
raid->flags |= AR_F_RAID_0;
|
|
raid->interleave = 1 << info.raid.raid0_shift;
|
|
break;
|
|
|
|
case PR_T_MIRROR:
|
|
raid->flags |= AR_F_RAID_1;
|
|
break;
|
|
|
|
case PR_T_SPAN:
|
|
raid->flags |= AR_F_SPAN;
|
|
break;
|
|
|
|
default:
|
|
printf("Promise unknown RAID type 0x%02x\n", info.raid.type);
|
|
return 1;
|
|
}
|
|
|
|
/* find out where this disk is in the defined array */
|
|
disk_number = info.raid.disk_number;
|
|
if (disk_number < info.raid.raid0_disks) {
|
|
raid->subdisk[disk_number] = adp;
|
|
raid->num_subdisks++;
|
|
if (raid->num_subdisks > 1 && !(raid->flags & AR_F_SPAN)) {
|
|
raid->flags |= AR_F_RAID_0;
|
|
raid->interleave = 1 << info.raid.raid0_shift;
|
|
}
|
|
}
|
|
else {
|
|
raid->mirrordisk[disk_number - info.raid.raid0_disks] = adp;
|
|
raid->num_mirrordisks++;
|
|
}
|
|
|
|
/* do we have a complete array to attach to ? */
|
|
if (raid->num_subdisks + raid->num_mirrordisks == info.raid.total_disks) {
|
|
raid->flags |= AR_F_CONF_DONE;
|
|
raid->lun = array;
|
|
raid->heads = info.raid.heads + 1;
|
|
raid->sectors = info.raid.sectors;
|
|
raid->cylinders = info.raid.cylinders + 1;
|
|
raid->total_secs = info.raid.total_secs;
|
|
raid->offset = 0;
|
|
raid->reserved = 63;
|
|
ar_attach(raid);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ar_read(struct ad_softc *adp, u_int32_t lba, int count, char *data)
|
|
{
|
|
if (ata_command(adp->controller, adp->unit | ATA_D_LBA,
|
|
(count > DEV_BSIZE) ? ATA_C_READ_MUL : ATA_C_READ,
|
|
(lba >> 8) & 0xffff, (lba >> 24) & 0xff, lba & 0xff,
|
|
count / DEV_BSIZE, 0, ATA_WAIT_INTR)) {
|
|
ata_printf(adp->controller, adp->unit, "RAID read config failed\n");
|
|
return 1;
|
|
}
|
|
if (ata_wait(adp->controller, adp->unit, ATA_S_READY|ATA_S_DSC|ATA_S_DRQ)) {
|
|
ata_printf(adp->controller, adp->unit, "RAID read config timeout\n");
|
|
return 1;
|
|
}
|
|
insw(adp->controller->ioaddr + ATA_DATA, data, count/sizeof(int16_t));
|
|
inb(adp->controller->ioaddr + ATA_STATUS);
|
|
return 0;
|
|
}
|