d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7360f347b2
freebsd-skq/sys/cam/cam.h
mav 478d881b57 One more major cam_periph_error() rewrite to improve error handling and 
reporting. It includes:
 - removing of error messages controlled by bootverbose, replacing them
with more universal and informative debugging on CAM_DEBUG_INFO level,
that is now built into the kernel by default;
 - more close following to the arguments submitted by caller, such as
SF_PRINT_ALWAYS, SF_QUIET_IR and SF_NO_PRINT; consumer knows better which
errors are usual/expected at this point and which are really informative;
 - adding two new flags SF_NO_RECOVERY and SF_NO_RETRY to allow caller
specify how much assistance it needs at this point; previously consumers
controlled that by not calling cam_periph_error() at all, but that made
behavior inconsistent and debugging complicated;
 - tuning debug messages and taken actions order to make debugging output
more readable and cause-effect relationships visible;
 - making camperiphdone() (common device recovery completion handler) to
also use cam_periph_error() in most cases, instead of own dumb code;
 - removing manual sense fetching code from cam_periph_error(); I was told
by number of people that it is SIM obligation to fetch sense data, so this
code is useless and only significantly complicates recovery logic;
 - making ada, da and pass driver to use cam_periph_error() with new limited
recovery options to handle error recovery and debugging in common way;
as one of results, CAM_REQUEUE_REQ and other retrying statuses are now
working fine with pass driver, that caused many problems before.
 - reverting r186891 by raj@ to avoid burning few seconds in tight DELAY()
loops on device probe, while device simply loads media; I think that problem
may already be fixed in other way, and even if it is not, solution must be
different.

Sponsored by:	iXsystems, Inc.
MFC after:	2 weeks
2012-06-09 13:07:44 +00:00

276 lines
9.1 KiB
C
Raw Blame History

/*-
* Data structures and definitions for the CAM system.
*
* Copyright (c) 1997 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _CAM_CAM_H
#define _CAM_CAM_H 1
#ifdef _KERNEL
#include <opt_cam.h>
#endif
#include <sys/cdefs.h>
typedef u_int path_id_t;
typedef u_int target_id_t;
typedef u_int lun_id_t;
#define CAM_XPT_PATH_ID ((path_id_t)~0)
#define CAM_BUS_WILDCARD ((path_id_t)~0)
#define CAM_TARGET_WILDCARD ((target_id_t)~0)
#define CAM_LUN_WILDCARD ((lun_id_t)~0)
/*
* Maximum length for a CAM CDB.
*/
#define CAM_MAX_CDBLEN 16
/*
* Definition of a CAM peripheral driver entry. Peripheral drivers instantiate
* one of these for each device they wish to communicate with and pass it into
* the xpt layer when they wish to schedule work on that device via the
* xpt_schedule API.
*/
struct cam_periph;
/*
* Priority information for a CAM structure.
*/
typedef enum {
CAM_RL_HOST,
CAM_RL_BUS,
CAM_RL_XPT,
CAM_RL_DEV,
CAM_RL_NORMAL,
CAM_RL_VALUES
} cam_rl;
/*
* The generation number is incremented everytime a new entry is entered into
* the queue giving round robin per priority level scheduling.
*/
typedef struct {
u_int32_t priority;
#define CAM_PRIORITY_HOST ((CAM_RL_HOST << 8) + 0x80)
#define CAM_PRIORITY_BUS ((CAM_RL_BUS << 8) + 0x80)
#define CAM_PRIORITY_XPT ((CAM_RL_XPT << 8) + 0x80)
#define CAM_PRIORITY_DEV ((CAM_RL_DEV << 8) + 0x80)
#define CAM_PRIORITY_NORMAL ((CAM_RL_NORMAL << 8) + 0x80)
#define CAM_PRIORITY_NONE (u_int32_t)-1
#define CAM_PRIORITY_TO_RL(x) ((x) >> 8)
u_int32_t generation;
int index;
#define CAM_UNQUEUED_INDEX -1
#define CAM_ACTIVE_INDEX -2
#define CAM_DONEQ_INDEX -3
} cam_pinfo;
/*
* Macro to compare two generation numbers. It is used like this:
*
* if (GENERATIONCMP(a, >=, b))
* ...;
*
* GERERATIONCMP uses modular arithmetic to guard against wraps
* wraps in the generation number.
*/
#define GENERATIONCMP(x, op, y) ((int32_t)((x) - (y)) op 0)
/* CAM flags XXX Move to cam_periph.h ??? */
typedef enum {
CAM_FLAG_NONE = 0x00,
CAM_EXPECT_INQ_CHANGE = 0x01,
CAM_RETRY_SELTO = 0x02 /* Retry Selection Timeouts */
} cam_flags;
enum {
SF_RETRY_UA = 0x01, /* Retry UNIT ATTENTION conditions. */
SF_NO_PRINT = 0x02, /* Never print error status. */
SF_QUIET_IR = 0x04, /* Be quiet about Illegal Request reponses */
SF_PRINT_ALWAYS = 0x08, /* Always print error status. */
SF_NO_RECOVERY = 0x10, /* Don't do active error recovery. */
SF_NO_RETRY = 0x20 /* Don't do any retries. */
};
/* CAM Status field values */
typedef enum {
CAM_REQ_INPROG, /* CCB request is in progress */
CAM_REQ_CMP, /* CCB request completed without error */
CAM_REQ_ABORTED, /* CCB request aborted by the host */
CAM_UA_ABORT, /* Unable to abort CCB request */
CAM_REQ_CMP_ERR, /* CCB request completed with an error */
CAM_BUSY, /* CAM subsystem is busy */
CAM_REQ_INVALID, /* CCB request was invalid */
CAM_PATH_INVALID, /* Supplied Path ID is invalid */
CAM_DEV_NOT_THERE, /* SCSI Device Not Installed/there */
CAM_UA_TERMIO, /* Unable to terminate I/O CCB request */
CAM_SEL_TIMEOUT, /* Target Selection Timeout */
CAM_CMD_TIMEOUT, /* Command timeout */
CAM_SCSI_STATUS_ERROR, /* SCSI error, look at error code in CCB */
CAM_MSG_REJECT_REC, /* Message Reject Received */
CAM_SCSI_BUS_RESET, /* SCSI Bus Reset Sent/Received */
CAM_UNCOR_PARITY, /* Uncorrectable parity error occurred */
CAM_AUTOSENSE_FAIL = 0x10,/* Autosense: request sense cmd fail */
CAM_NO_HBA, /* No HBA Detected error */
CAM_DATA_RUN_ERR, /* Data Overrun error */
CAM_UNEXP_BUSFREE, /* Unexpected Bus Free */
CAM_SEQUENCE_FAIL, /* Target Bus Phase Sequence Failure */
CAM_CCB_LEN_ERR, /* CCB length supplied is inadequate */
CAM_PROVIDE_FAIL, /* Unable to provide requested capability */
CAM_BDR_SENT, /* A SCSI BDR msg was sent to target */
CAM_REQ_TERMIO, /* CCB request terminated by the host */
CAM_UNREC_HBA_ERROR, /* Unrecoverable Host Bus Adapter Error */
CAM_REQ_TOO_BIG, /* The request was too large for this host */
CAM_REQUEUE_REQ, /*
* This request should be requeued to preserve
* transaction ordering. This typically occurs
* when the SIM recognizes an error that should
* freeze the queue and must place additional
* requests for the target at the sim level
* back into the XPT queue.
*/
CAM_ATA_STATUS_ERROR, /* ATA error, look at error code in CCB */
CAM_SCSI_IT_NEXUS_LOST, /* Initiator/Target Nexus lost. */
CAM_SMP_STATUS_ERROR, /* SMP error, look at error code in CCB */
CAM_IDE = 0x33, /* Initiator Detected Error */
CAM_RESRC_UNAVAIL, /* Resource Unavailable */
CAM_UNACKED_EVENT, /* Unacknowledged Event by Host */
CAM_MESSAGE_RECV, /* Message Received in Host Target Mode */
CAM_INVALID_CDB, /* Invalid CDB received in Host Target Mode */
CAM_LUN_INVALID, /* Lun supplied is invalid */
CAM_TID_INVALID, /* Target ID supplied is invalid */
CAM_FUNC_NOTAVAIL, /* The requested function is not available */
CAM_NO_NEXUS, /* Nexus is not established */
CAM_IID_INVALID, /* The initiator ID is invalid */
CAM_CDB_RECVD, /* The SCSI CDB has been received */
CAM_LUN_ALRDY_ENA, /* The LUN is already enabled for target mode */
CAM_SCSI_BUSY, /* SCSI Bus Busy */
CAM_DEV_QFRZN = 0x40, /* The DEV queue is frozen w/this err */
/* Autosense data valid for target */
CAM_AUTOSNS_VALID = 0x80,
CAM_RELEASE_SIMQ = 0x100,/* SIM ready to take more commands */
CAM_SIM_QUEUED = 0x200,/* SIM has this command in it's queue */
CAM_STATUS_MASK = 0x3F, /* Mask bits for just the status # */
/* Target Specific Adjunct Status */
CAM_SENT_SENSE = 0x40000000 /* sent sense with status */
} cam_status;
typedef enum {
CAM_ESF_NONE = 0x00,
CAM_ESF_COMMAND = 0x01,
CAM_ESF_CAM_STATUS = 0x02,
CAM_ESF_PROTO_STATUS = 0x04,
CAM_ESF_ALL = 0xff
} cam_error_string_flags;
typedef enum {
CAM_EPF_NONE = 0x00,
CAM_EPF_MINIMAL = 0x01,
CAM_EPF_NORMAL = 0x02,
CAM_EPF_ALL = 0x03,
CAM_EPF_LEVEL_MASK = 0x0f
/* All bits above bit 3 are protocol-specific */
} cam_error_proto_flags;
typedef enum {
CAM_ESF_PRINT_NONE = 0x00,
CAM_ESF_PRINT_STATUS = 0x10,
CAM_ESF_PRINT_SENSE = 0x20
} cam_error_scsi_flags;
typedef enum {
CAM_ESMF_PRINT_NONE = 0x00,
CAM_ESMF_PRINT_STATUS = 0x10,
CAM_ESMF_PRINT_FULL_CMD = 0x20,
} cam_error_smp_flags;
typedef enum {
CAM_EAF_PRINT_NONE = 0x00,
CAM_EAF_PRINT_STATUS = 0x10,
CAM_EAF_PRINT_RESULT = 0x20
} cam_error_ata_flags;
struct cam_status_entry
{
cam_status status_code;
const char *status_text;
};
extern const struct cam_status_entry cam_status_table[];
extern const int num_cam_status_entries;
union ccb;
#ifdef SYSCTL_DECL /* from sysctl.h */
SYSCTL_DECL(_kern_cam);
#endif
__BEGIN_DECLS
typedef int (cam_quirkmatch_t)(caddr_t, caddr_t);
caddr_t cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
int entry_size, cam_quirkmatch_t *comp_func);
void cam_strvis(u_int8_t *dst, const u_int8_t *src, int srclen, int dstlen);
int cam_strmatch(const u_int8_t *str, const u_int8_t *pattern, int str_len);
const struct cam_status_entry*
cam_fetch_status_entry(cam_status status);
#ifdef _KERNEL
char * cam_error_string(union ccb *ccb, char *str, int str_len,
cam_error_string_flags flags,
cam_error_proto_flags proto_flags);
void cam_error_print(union ccb *ccb, cam_error_string_flags flags,
cam_error_proto_flags proto_flags);
#else /* _KERNEL */
struct cam_device;
char * cam_error_string(struct cam_device *device, union ccb *ccb, char *str,
int str_len, cam_error_string_flags flags,
cam_error_proto_flags proto_flags);
void cam_error_print(struct cam_device *device, union ccb *ccb,
cam_error_string_flags flags,
cam_error_proto_flags proto_flags, FILE *ofile);
#endif /* _KERNEL */
__END_DECLS
#ifdef _KERNEL
static __inline void cam_init_pinfo(cam_pinfo *pinfo);
static __inline void cam_init_pinfo(cam_pinfo *pinfo)
{
pinfo->priority = CAM_PRIORITY_NONE;
pinfo->index = CAM_UNQUEUED_INDEX;
}
#endif
#endif /* _CAM_CAM_H */
Reference in New Issue View Git Blame Copy Permalink