41b065b8d4
Reviewed by: yongari
2413 lines
60 KiB
C
2413 lines
60 KiB
C
/*-
|
|
* Copyright (c) 2005 Poul-Henning Kamp <phk@FreeBSD.org>
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* SiS 900/SiS 7016 fast ethernet PCI NIC driver. Datasheets are
|
|
* available from http://www.sis.com.tw.
|
|
*
|
|
* This driver also supports the NatSemi DP83815. Datasheets are
|
|
* available from http://www.national.com.
|
|
*
|
|
* Written by Bill Paul <wpaul@ee.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
/*
|
|
* The SiS 900 is a fairly simple chip. It uses bus master DMA with
|
|
* simple TX and RX descriptors of 3 longwords in size. The receiver
|
|
* has a single perfect filter entry for the station address and a
|
|
* 128-bit multicast hash table. The SiS 900 has a built-in MII-based
|
|
* transceiver while the 7016 requires an external transceiver chip.
|
|
* Both chips offer the standard bit-bang MII interface as well as
|
|
* an enchanced PHY interface which simplifies accessing MII registers.
|
|
*
|
|
* The only downside to this chipset is that RX descriptors must be
|
|
* longword aligned.
|
|
*/
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/module.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/mii_bitbang.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#define SIS_USEIOSPACE
|
|
|
|
#include <dev/sis/if_sisreg.h>
|
|
|
|
MODULE_DEPEND(sis, pci, 1, 1, 1);
|
|
MODULE_DEPEND(sis, ether, 1, 1, 1);
|
|
MODULE_DEPEND(sis, miibus, 1, 1, 1);
|
|
|
|
/* "device miibus" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
#define SIS_LOCK(_sc) mtx_lock(&(_sc)->sis_mtx)
|
|
#define SIS_UNLOCK(_sc) mtx_unlock(&(_sc)->sis_mtx)
|
|
#define SIS_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sis_mtx, MA_OWNED)
|
|
|
|
/*
|
|
* register space access macros
|
|
*/
|
|
#define CSR_WRITE_4(sc, reg, val) bus_write_4(sc->sis_res[0], reg, val)
|
|
|
|
#define CSR_READ_4(sc, reg) bus_read_4(sc->sis_res[0], reg)
|
|
|
|
#define CSR_READ_2(sc, reg) bus_read_2(sc->sis_res[0], reg)
|
|
|
|
#define CSR_BARRIER(sc, reg, length, flags) \
|
|
bus_barrier(sc->sis_res[0], reg, length, flags)
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static const struct sis_type const sis_devs[] = {
|
|
{ SIS_VENDORID, SIS_DEVICEID_900, "SiS 900 10/100BaseTX" },
|
|
{ SIS_VENDORID, SIS_DEVICEID_7016, "SiS 7016 10/100BaseTX" },
|
|
{ NS_VENDORID, NS_DEVICEID_DP83815, "NatSemi DP8381[56] 10/100BaseTX" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static int sis_detach(device_t);
|
|
static __inline void sis_discard_rxbuf(struct sis_rxdesc *);
|
|
static int sis_dma_alloc(struct sis_softc *);
|
|
static void sis_dma_free(struct sis_softc *);
|
|
static int sis_dma_ring_alloc(struct sis_softc *, bus_size_t, bus_size_t,
|
|
bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *, const char *);
|
|
static void sis_dmamap_cb(void *, bus_dma_segment_t *, int, int);
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
static __inline void sis_fixup_rx(struct mbuf *);
|
|
#endif
|
|
static void sis_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
static int sis_ifmedia_upd(struct ifnet *);
|
|
static void sis_init(void *);
|
|
static void sis_initl(struct sis_softc *);
|
|
static void sis_intr(void *);
|
|
static int sis_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static uint32_t sis_mii_bitbang_read(device_t);
|
|
static void sis_mii_bitbang_write(device_t, uint32_t);
|
|
static int sis_newbuf(struct sis_softc *, struct sis_rxdesc *);
|
|
static int sis_resume(device_t);
|
|
static int sis_rxeof(struct sis_softc *);
|
|
static void sis_rxfilter(struct sis_softc *);
|
|
static void sis_rxfilter_ns(struct sis_softc *);
|
|
static void sis_rxfilter_sis(struct sis_softc *);
|
|
static void sis_start(struct ifnet *);
|
|
static void sis_startl(struct ifnet *);
|
|
static void sis_stop(struct sis_softc *);
|
|
static int sis_suspend(device_t);
|
|
static void sis_add_sysctls(struct sis_softc *);
|
|
static void sis_watchdog(struct sis_softc *);
|
|
static void sis_wol(struct sis_softc *);
|
|
|
|
/*
|
|
* MII bit-bang glue
|
|
*/
|
|
static const struct mii_bitbang_ops sis_mii_bitbang_ops = {
|
|
sis_mii_bitbang_read,
|
|
sis_mii_bitbang_write,
|
|
{
|
|
SIS_MII_DATA, /* MII_BIT_MDO */
|
|
SIS_MII_DATA, /* MII_BIT_MDI */
|
|
SIS_MII_CLK, /* MII_BIT_MDC */
|
|
SIS_MII_DIR, /* MII_BIT_DIR_HOST_PHY */
|
|
0, /* MII_BIT_DIR_PHY_HOST */
|
|
}
|
|
};
|
|
|
|
static struct resource_spec sis_res_spec[] = {
|
|
#ifdef SIS_USEIOSPACE
|
|
{ SYS_RES_IOPORT, SIS_PCI_LOIO, RF_ACTIVE},
|
|
#else
|
|
{ SYS_RES_MEMORY, SIS_PCI_LOMEM, RF_ACTIVE},
|
|
#endif
|
|
{ SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE},
|
|
{ -1, 0 }
|
|
};
|
|
|
|
#define SIS_SETBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) | (x))
|
|
|
|
#define SIS_CLRBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) & ~(x))
|
|
|
|
#define SIO_SET(x) \
|
|
CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) | x)
|
|
|
|
#define SIO_CLR(x) \
|
|
CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) & ~x)
|
|
|
|
/*
|
|
* Routine to reverse the bits in a word. Stolen almost
|
|
* verbatim from /usr/games/fortune.
|
|
*/
|
|
static uint16_t
|
|
sis_reverse(uint16_t n)
|
|
{
|
|
n = ((n >> 1) & 0x5555) | ((n << 1) & 0xaaaa);
|
|
n = ((n >> 2) & 0x3333) | ((n << 2) & 0xcccc);
|
|
n = ((n >> 4) & 0x0f0f) | ((n << 4) & 0xf0f0);
|
|
n = ((n >> 8) & 0x00ff) | ((n << 8) & 0xff00);
|
|
|
|
return (n);
|
|
}
|
|
|
|
static void
|
|
sis_delay(struct sis_softc *sc)
|
|
{
|
|
int idx;
|
|
|
|
for (idx = (300 / 33) + 1; idx > 0; idx--)
|
|
CSR_READ_4(sc, SIS_CSR);
|
|
}
|
|
|
|
static void
|
|
sis_eeprom_idle(struct sis_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
SIO_SET(SIS_EECTL_CSEL);
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
|
|
for (i = 0; i < 25; i++) {
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
}
|
|
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CSEL);
|
|
sis_delay(sc);
|
|
CSR_WRITE_4(sc, SIS_EECTL, 0x00000000);
|
|
}
|
|
|
|
/*
|
|
* Send a read command and address to the EEPROM, check for ACK.
|
|
*/
|
|
static void
|
|
sis_eeprom_putbyte(struct sis_softc *sc, int addr)
|
|
{
|
|
int d, i;
|
|
|
|
d = addr | SIS_EECMD_READ;
|
|
|
|
/*
|
|
* Feed in each bit and stobe the clock.
|
|
*/
|
|
for (i = 0x400; i; i >>= 1) {
|
|
if (d & i) {
|
|
SIO_SET(SIS_EECTL_DIN);
|
|
} else {
|
|
SIO_CLR(SIS_EECTL_DIN);
|
|
}
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void
|
|
sis_eeprom_getword(struct sis_softc *sc, int addr, uint16_t *dest)
|
|
{
|
|
int i;
|
|
uint16_t word = 0;
|
|
|
|
/* Force EEPROM to idle state. */
|
|
sis_eeprom_idle(sc);
|
|
|
|
/* Enter EEPROM access mode. */
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CSEL);
|
|
sis_delay(sc);
|
|
|
|
/*
|
|
* Send address of word we want to read.
|
|
*/
|
|
sis_eeprom_putbyte(sc, addr);
|
|
|
|
/*
|
|
* Start reading bits from EEPROM.
|
|
*/
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECTL_DOUT)
|
|
word |= i;
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
}
|
|
|
|
/* Turn off EEPROM access mode. */
|
|
sis_eeprom_idle(sc);
|
|
|
|
*dest = word;
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void
|
|
sis_read_eeprom(struct sis_softc *sc, caddr_t dest, int off, int cnt, int swap)
|
|
{
|
|
int i;
|
|
uint16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
sis_eeprom_getword(sc, off + i, &word);
|
|
ptr = (uint16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
}
|
|
|
|
#if defined(__i386__) || defined(__amd64__)
|
|
static device_t
|
|
sis_find_bridge(device_t dev)
|
|
{
|
|
devclass_t pci_devclass;
|
|
device_t *pci_devices;
|
|
int pci_count = 0;
|
|
device_t *pci_children;
|
|
int pci_childcount = 0;
|
|
device_t *busp, *childp;
|
|
device_t child = NULL;
|
|
int i, j;
|
|
|
|
if ((pci_devclass = devclass_find("pci")) == NULL)
|
|
return (NULL);
|
|
|
|
devclass_get_devices(pci_devclass, &pci_devices, &pci_count);
|
|
|
|
for (i = 0, busp = pci_devices; i < pci_count; i++, busp++) {
|
|
if (device_get_children(*busp, &pci_children, &pci_childcount))
|
|
continue;
|
|
for (j = 0, childp = pci_children;
|
|
j < pci_childcount; j++, childp++) {
|
|
if (pci_get_vendor(*childp) == SIS_VENDORID &&
|
|
pci_get_device(*childp) == 0x0008) {
|
|
child = *childp;
|
|
free(pci_children, M_TEMP);
|
|
goto done;
|
|
}
|
|
}
|
|
free(pci_children, M_TEMP);
|
|
}
|
|
|
|
done:
|
|
free(pci_devices, M_TEMP);
|
|
return (child);
|
|
}
|
|
|
|
static void
|
|
sis_read_cmos(struct sis_softc *sc, device_t dev, caddr_t dest, int off, int cnt)
|
|
{
|
|
device_t bridge;
|
|
uint8_t reg;
|
|
int i;
|
|
bus_space_tag_t btag;
|
|
|
|
bridge = sis_find_bridge(dev);
|
|
if (bridge == NULL)
|
|
return;
|
|
reg = pci_read_config(bridge, 0x48, 1);
|
|
pci_write_config(bridge, 0x48, reg|0x40, 1);
|
|
|
|
/* XXX */
|
|
#if defined(__amd64__) || defined(__i386__)
|
|
btag = X86_BUS_SPACE_IO;
|
|
#endif
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
bus_space_write_1(btag, 0x0, 0x70, i + off);
|
|
*(dest + i) = bus_space_read_1(btag, 0x0, 0x71);
|
|
}
|
|
|
|
pci_write_config(bridge, 0x48, reg & ~0x40, 1);
|
|
}
|
|
|
|
static void
|
|
sis_read_mac(struct sis_softc *sc, device_t dev, caddr_t dest)
|
|
{
|
|
uint32_t filtsave, csrsave;
|
|
|
|
filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
csrsave = CSR_READ_4(sc, SIS_CSR);
|
|
|
|
CSR_WRITE_4(sc, SIS_CSR, SIS_CSR_RELOAD | filtsave);
|
|
CSR_WRITE_4(sc, SIS_CSR, 0);
|
|
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave & ~SIS_RXFILTCTL_ENABLE);
|
|
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
|
|
((uint16_t *)dest)[0] = CSR_READ_2(sc, SIS_RXFILT_DATA);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL,SIS_FILTADDR_PAR1);
|
|
((uint16_t *)dest)[1] = CSR_READ_2(sc, SIS_RXFILT_DATA);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
|
|
((uint16_t *)dest)[2] = CSR_READ_2(sc, SIS_RXFILT_DATA);
|
|
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave);
|
|
CSR_WRITE_4(sc, SIS_CSR, csrsave);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Read the MII serial port for the MII bit-bang module.
|
|
*/
|
|
static uint32_t
|
|
sis_mii_bitbang_read(device_t dev)
|
|
{
|
|
struct sis_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
val = CSR_READ_4(sc, SIS_EECTL);
|
|
CSR_BARRIER(sc, SIS_EECTL, 4,
|
|
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
|
|
return (val);
|
|
}
|
|
|
|
/*
|
|
* Write the MII serial port for the MII bit-bang module.
|
|
*/
|
|
static void
|
|
sis_mii_bitbang_write(device_t dev, uint32_t val)
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
CSR_WRITE_4(sc, SIS_EECTL, val);
|
|
CSR_BARRIER(sc, SIS_EECTL, 4,
|
|
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
|
|
}
|
|
|
|
static int
|
|
sis_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->sis_type == SIS_TYPE_83815) {
|
|
if (phy != 0)
|
|
return (0);
|
|
/*
|
|
* The NatSemi chip can take a while after
|
|
* a reset to come ready, during which the BMSR
|
|
* returns a value of 0. This is *never* supposed
|
|
* to happen: some of the BMSR bits are meant to
|
|
* be hardwired in the on position, and this can
|
|
* confuse the miibus code a bit during the probe
|
|
* and attach phase. So we make an effort to check
|
|
* for this condition and wait for it to clear.
|
|
*/
|
|
if (!CSR_READ_4(sc, NS_BMSR))
|
|
DELAY(1000);
|
|
return CSR_READ_4(sc, NS_BMCR + (reg * 4));
|
|
}
|
|
|
|
/*
|
|
* Chipsets < SIS_635 seem not to be able to read/write
|
|
* through mdio. Use the enhanced PHY access register
|
|
* again for them.
|
|
*/
|
|
if (sc->sis_type == SIS_TYPE_900 &&
|
|
sc->sis_rev < SIS_REV_635) {
|
|
int i, val = 0;
|
|
|
|
if (phy != 0)
|
|
return (0);
|
|
|
|
CSR_WRITE_4(sc, SIS_PHYCTL,
|
|
(phy << 11) | (reg << 6) | SIS_PHYOP_READ);
|
|
SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
|
|
|
|
for (i = 0; i < SIS_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
|
|
break;
|
|
}
|
|
|
|
if (i == SIS_TIMEOUT) {
|
|
device_printf(sc->sis_dev,
|
|
"PHY failed to come ready\n");
|
|
return (0);
|
|
}
|
|
|
|
val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF;
|
|
|
|
if (val == 0xFFFF)
|
|
return (0);
|
|
|
|
return (val);
|
|
} else
|
|
return (mii_bitbang_readreg(dev, &sis_mii_bitbang_ops, phy,
|
|
reg));
|
|
}
|
|
|
|
static int
|
|
sis_miibus_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->sis_type == SIS_TYPE_83815) {
|
|
if (phy != 0)
|
|
return (0);
|
|
CSR_WRITE_4(sc, NS_BMCR + (reg * 4), data);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Chipsets < SIS_635 seem not to be able to read/write
|
|
* through mdio. Use the enhanced PHY access register
|
|
* again for them.
|
|
*/
|
|
if (sc->sis_type == SIS_TYPE_900 &&
|
|
sc->sis_rev < SIS_REV_635) {
|
|
int i;
|
|
|
|
if (phy != 0)
|
|
return (0);
|
|
|
|
CSR_WRITE_4(sc, SIS_PHYCTL, (data << 16) | (phy << 11) |
|
|
(reg << 6) | SIS_PHYOP_WRITE);
|
|
SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
|
|
|
|
for (i = 0; i < SIS_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
|
|
break;
|
|
}
|
|
|
|
if (i == SIS_TIMEOUT)
|
|
device_printf(sc->sis_dev,
|
|
"PHY failed to come ready\n");
|
|
} else
|
|
mii_bitbang_writereg(dev, &sis_mii_bitbang_ops, phy, reg,
|
|
data);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
sis_miibus_statchg(device_t dev)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifnet *ifp;
|
|
uint32_t reg;
|
|
|
|
sc = device_get_softc(dev);
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
ifp = sc->sis_ifp;
|
|
if (mii == NULL || ifp == NULL ||
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
return;
|
|
|
|
sc->sis_flags &= ~SIS_FLAG_LINK;
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_10_T:
|
|
CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_10);
|
|
sc->sis_flags |= SIS_FLAG_LINK;
|
|
break;
|
|
case IFM_100_TX:
|
|
CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_100);
|
|
sc->sis_flags |= SIS_FLAG_LINK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((sc->sis_flags & SIS_FLAG_LINK) == 0) {
|
|
/*
|
|
* Stopping MACs seem to reset SIS_TX_LISTPTR and
|
|
* SIS_RX_LISTPTR which in turn requires resetting
|
|
* TX/RX buffers. So just don't do anything for
|
|
* lost link.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
/* Set full/half duplex mode. */
|
|
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) {
|
|
SIS_SETBIT(sc, SIS_TX_CFG,
|
|
(SIS_TXCFG_IGN_HBEAT | SIS_TXCFG_IGN_CARR));
|
|
SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
|
|
} else {
|
|
SIS_CLRBIT(sc, SIS_TX_CFG,
|
|
(SIS_TXCFG_IGN_HBEAT | SIS_TXCFG_IGN_CARR));
|
|
SIS_CLRBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
|
|
}
|
|
|
|
if (sc->sis_type == SIS_TYPE_83816) {
|
|
/*
|
|
* MPII03.D: Half Duplex Excessive Collisions.
|
|
* Also page 49 in 83816 manual
|
|
*/
|
|
SIS_SETBIT(sc, SIS_TX_CFG, SIS_TXCFG_MPII03D);
|
|
}
|
|
|
|
if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr < NS_SRR_16A &&
|
|
IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
|
|
/*
|
|
* Short Cable Receive Errors (MP21.E)
|
|
*/
|
|
CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001);
|
|
reg = CSR_READ_4(sc, NS_PHY_DSPCFG) & 0xfff;
|
|
CSR_WRITE_4(sc, NS_PHY_DSPCFG, reg | 0x1000);
|
|
DELAY(100);
|
|
reg = CSR_READ_4(sc, NS_PHY_TDATA) & 0xff;
|
|
if ((reg & 0x0080) == 0 || (reg > 0xd8 && reg <= 0xff)) {
|
|
device_printf(sc->sis_dev,
|
|
"Applying short cable fix (reg=%x)\n", reg);
|
|
CSR_WRITE_4(sc, NS_PHY_TDATA, 0x00e8);
|
|
SIS_SETBIT(sc, NS_PHY_DSPCFG, 0x20);
|
|
}
|
|
CSR_WRITE_4(sc, NS_PHY_PAGE, 0);
|
|
}
|
|
/* Enable TX/RX MACs. */
|
|
SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE | SIS_CSR_RX_DISABLE);
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE | SIS_CSR_RX_ENABLE);
|
|
}
|
|
|
|
static uint32_t
|
|
sis_mchash(struct sis_softc *sc, const uint8_t *addr)
|
|
{
|
|
uint32_t crc;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = ether_crc32_be(addr, ETHER_ADDR_LEN);
|
|
|
|
/*
|
|
* return the filter bit position
|
|
*
|
|
* The NatSemi chip has a 512-bit filter, which is
|
|
* different than the SiS, so we special-case it.
|
|
*/
|
|
if (sc->sis_type == SIS_TYPE_83815)
|
|
return (crc >> 23);
|
|
else if (sc->sis_rev >= SIS_REV_635 ||
|
|
sc->sis_rev == SIS_REV_900B)
|
|
return (crc >> 24);
|
|
else
|
|
return (crc >> 25);
|
|
}
|
|
|
|
static void
|
|
sis_rxfilter(struct sis_softc *sc)
|
|
{
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
if (sc->sis_type == SIS_TYPE_83815)
|
|
sis_rxfilter_ns(sc);
|
|
else
|
|
sis_rxfilter_sis(sc);
|
|
}
|
|
|
|
static void
|
|
sis_rxfilter_ns(struct sis_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
uint32_t h, i, filter;
|
|
int bit, index;
|
|
|
|
ifp = sc->sis_ifp;
|
|
filter = CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
if (filter & SIS_RXFILTCTL_ENABLE) {
|
|
/*
|
|
* Filter should be disabled to program other bits.
|
|
*/
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filter & ~SIS_RXFILTCTL_ENABLE);
|
|
CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
}
|
|
filter &= ~(NS_RXFILTCTL_ARP | NS_RXFILTCTL_PERFECT |
|
|
NS_RXFILTCTL_MCHASH | SIS_RXFILTCTL_ALLPHYS | SIS_RXFILTCTL_BROAD |
|
|
SIS_RXFILTCTL_ALLMULTI);
|
|
|
|
if (ifp->if_flags & IFF_BROADCAST)
|
|
filter |= SIS_RXFILTCTL_BROAD;
|
|
/*
|
|
* For the NatSemi chip, we have to explicitly enable the
|
|
* reception of ARP frames, as well as turn on the 'perfect
|
|
* match' filter where we store the station address, otherwise
|
|
* we won't receive unicasts meant for this host.
|
|
*/
|
|
filter |= NS_RXFILTCTL_ARP | NS_RXFILTCTL_PERFECT;
|
|
|
|
if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) {
|
|
filter |= SIS_RXFILTCTL_ALLMULTI;
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
filter |= SIS_RXFILTCTL_ALLPHYS;
|
|
} else {
|
|
/*
|
|
* We have to explicitly enable the multicast hash table
|
|
* on the NatSemi chip if we want to use it, which we do.
|
|
*/
|
|
filter |= NS_RXFILTCTL_MCHASH;
|
|
|
|
/* first, zot all the existing hash bits */
|
|
for (i = 0; i < 32; i++) {
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO +
|
|
(i * 2));
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0);
|
|
}
|
|
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = sis_mchash(sc,
|
|
LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
index = h >> 3;
|
|
bit = h & 0x1F;
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO +
|
|
index);
|
|
if (bit > 0xF)
|
|
bit -= 0x10;
|
|
SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << bit));
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
}
|
|
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filter);
|
|
CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
}
|
|
|
|
static void
|
|
sis_rxfilter_sis(struct sis_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
uint32_t filter, h, i, n;
|
|
uint16_t hashes[16];
|
|
|
|
ifp = sc->sis_ifp;
|
|
|
|
/* hash table size */
|
|
if (sc->sis_rev >= SIS_REV_635 || sc->sis_rev == SIS_REV_900B)
|
|
n = 16;
|
|
else
|
|
n = 8;
|
|
|
|
filter = CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
if (filter & SIS_RXFILTCTL_ENABLE) {
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filter & ~SIS_RXFILT_CTL);
|
|
CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
}
|
|
filter &= ~(SIS_RXFILTCTL_ALLPHYS | SIS_RXFILTCTL_BROAD |
|
|
SIS_RXFILTCTL_ALLMULTI);
|
|
if (ifp->if_flags & IFF_BROADCAST)
|
|
filter |= SIS_RXFILTCTL_BROAD;
|
|
|
|
if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) {
|
|
filter |= SIS_RXFILTCTL_ALLMULTI;
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
filter |= SIS_RXFILTCTL_ALLPHYS;
|
|
for (i = 0; i < n; i++)
|
|
hashes[i] = ~0;
|
|
} else {
|
|
for (i = 0; i < n; i++)
|
|
hashes[i] = 0;
|
|
i = 0;
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = sis_mchash(sc,
|
|
LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
hashes[h >> 4] |= 1 << (h & 0xf);
|
|
i++;
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
if (i > n) {
|
|
filter |= SIS_RXFILTCTL_ALLMULTI;
|
|
for (i = 0; i < n; i++)
|
|
hashes[i] = ~0;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < n; i++) {
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + i) << 16);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, hashes[i]);
|
|
}
|
|
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filter);
|
|
CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
}
|
|
|
|
static void
|
|
sis_reset(struct sis_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RESET);
|
|
|
|
for (i = 0; i < SIS_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, SIS_CSR) & SIS_CSR_RESET))
|
|
break;
|
|
}
|
|
|
|
if (i == SIS_TIMEOUT)
|
|
device_printf(sc->sis_dev, "reset never completed\n");
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
|
|
/*
|
|
* If this is a NetSemi chip, make sure to clear
|
|
* PME mode.
|
|
*/
|
|
if (sc->sis_type == SIS_TYPE_83815) {
|
|
CSR_WRITE_4(sc, NS_CLKRUN, NS_CLKRUN_PMESTS);
|
|
CSR_WRITE_4(sc, NS_CLKRUN, 0);
|
|
} else {
|
|
/* Disable WOL functions. */
|
|
CSR_WRITE_4(sc, SIS_PWRMAN_CTL, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Probe for an SiS chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
sis_probe(device_t dev)
|
|
{
|
|
const struct sis_type *t;
|
|
|
|
t = sis_devs;
|
|
|
|
while (t->sis_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->sis_vid) &&
|
|
(pci_get_device(dev) == t->sis_did)) {
|
|
device_set_desc(dev, t->sis_name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
sis_attach(device_t dev)
|
|
{
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
int error = 0, pmc, waittime = 0;
|
|
|
|
waittime = 0;
|
|
sc = device_get_softc(dev);
|
|
|
|
sc->sis_dev = dev;
|
|
|
|
mtx_init(&sc->sis_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
callout_init_mtx(&sc->sis_stat_ch, &sc->sis_mtx, 0);
|
|
|
|
if (pci_get_device(dev) == SIS_DEVICEID_900)
|
|
sc->sis_type = SIS_TYPE_900;
|
|
if (pci_get_device(dev) == SIS_DEVICEID_7016)
|
|
sc->sis_type = SIS_TYPE_7016;
|
|
if (pci_get_vendor(dev) == NS_VENDORID)
|
|
sc->sis_type = SIS_TYPE_83815;
|
|
|
|
sc->sis_rev = pci_read_config(dev, PCIR_REVID, 1);
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
error = bus_alloc_resources(dev, sis_res_spec, sc->sis_res);
|
|
if (error) {
|
|
device_printf(dev, "couldn't allocate resources\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Reset the adapter. */
|
|
sis_reset(sc);
|
|
|
|
if (sc->sis_type == SIS_TYPE_900 &&
|
|
(sc->sis_rev == SIS_REV_635 ||
|
|
sc->sis_rev == SIS_REV_900B)) {
|
|
SIO_SET(SIS_CFG_RND_CNT);
|
|
SIO_SET(SIS_CFG_PERR_DETECT);
|
|
}
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
switch (pci_get_vendor(dev)) {
|
|
case NS_VENDORID:
|
|
sc->sis_srr = CSR_READ_4(sc, NS_SRR);
|
|
|
|
/* We can't update the device description, so spew */
|
|
if (sc->sis_srr == NS_SRR_15C)
|
|
device_printf(dev, "Silicon Revision: DP83815C\n");
|
|
else if (sc->sis_srr == NS_SRR_15D)
|
|
device_printf(dev, "Silicon Revision: DP83815D\n");
|
|
else if (sc->sis_srr == NS_SRR_16A)
|
|
device_printf(dev, "Silicon Revision: DP83816A\n");
|
|
else
|
|
device_printf(dev, "Silicon Revision %x\n", sc->sis_srr);
|
|
|
|
/*
|
|
* Reading the MAC address out of the EEPROM on
|
|
* the NatSemi chip takes a bit more work than
|
|
* you'd expect. The address spans 4 16-bit words,
|
|
* with the first word containing only a single bit.
|
|
* You have to shift everything over one bit to
|
|
* get it aligned properly. Also, the bits are
|
|
* stored backwards (the LSB is really the MSB,
|
|
* and so on) so you have to reverse them in order
|
|
* to get the MAC address into the form we want.
|
|
* Why? Who the hell knows.
|
|
*/
|
|
{
|
|
uint16_t tmp[4];
|
|
|
|
sis_read_eeprom(sc, (caddr_t)&tmp,
|
|
NS_EE_NODEADDR, 4, 0);
|
|
|
|
/* Shift everything over one bit. */
|
|
tmp[3] = tmp[3] >> 1;
|
|
tmp[3] |= tmp[2] << 15;
|
|
tmp[2] = tmp[2] >> 1;
|
|
tmp[2] |= tmp[1] << 15;
|
|
tmp[1] = tmp[1] >> 1;
|
|
tmp[1] |= tmp[0] << 15;
|
|
|
|
/* Now reverse all the bits. */
|
|
tmp[3] = sis_reverse(tmp[3]);
|
|
tmp[2] = sis_reverse(tmp[2]);
|
|
tmp[1] = sis_reverse(tmp[1]);
|
|
|
|
eaddr[0] = (tmp[1] >> 0) & 0xFF;
|
|
eaddr[1] = (tmp[1] >> 8) & 0xFF;
|
|
eaddr[2] = (tmp[2] >> 0) & 0xFF;
|
|
eaddr[3] = (tmp[2] >> 8) & 0xFF;
|
|
eaddr[4] = (tmp[3] >> 0) & 0xFF;
|
|
eaddr[5] = (tmp[3] >> 8) & 0xFF;
|
|
}
|
|
break;
|
|
case SIS_VENDORID:
|
|
default:
|
|
#if defined(__i386__) || defined(__amd64__)
|
|
/*
|
|
* If this is a SiS 630E chipset with an embedded
|
|
* SiS 900 controller, we have to read the MAC address
|
|
* from the APC CMOS RAM. Our method for doing this
|
|
* is very ugly since we have to reach out and grab
|
|
* ahold of hardware for which we cannot properly
|
|
* allocate resources. This code is only compiled on
|
|
* the i386 architecture since the SiS 630E chipset
|
|
* is for x86 motherboards only. Note that there are
|
|
* a lot of magic numbers in this hack. These are
|
|
* taken from SiS's Linux driver. I'd like to replace
|
|
* them with proper symbolic definitions, but that
|
|
* requires some datasheets that I don't have access
|
|
* to at the moment.
|
|
*/
|
|
if (sc->sis_rev == SIS_REV_630S ||
|
|
sc->sis_rev == SIS_REV_630E ||
|
|
sc->sis_rev == SIS_REV_630EA1)
|
|
sis_read_cmos(sc, dev, (caddr_t)&eaddr, 0x9, 6);
|
|
|
|
else if (sc->sis_rev == SIS_REV_635 ||
|
|
sc->sis_rev == SIS_REV_630ET)
|
|
sis_read_mac(sc, dev, (caddr_t)&eaddr);
|
|
else if (sc->sis_rev == SIS_REV_96x) {
|
|
/* Allow to read EEPROM from LAN. It is shared
|
|
* between a 1394 controller and the NIC and each
|
|
* time we access it, we need to set SIS_EECMD_REQ.
|
|
*/
|
|
SIO_SET(SIS_EECMD_REQ);
|
|
for (waittime = 0; waittime < SIS_TIMEOUT;
|
|
waittime++) {
|
|
/* Force EEPROM to idle state. */
|
|
sis_eeprom_idle(sc);
|
|
if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECMD_GNT) {
|
|
sis_read_eeprom(sc, (caddr_t)&eaddr,
|
|
SIS_EE_NODEADDR, 3, 0);
|
|
break;
|
|
}
|
|
DELAY(1);
|
|
}
|
|
/*
|
|
* Set SIS_EECTL_CLK to high, so a other master
|
|
* can operate on the i2c bus.
|
|
*/
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
/* Refuse EEPROM access by LAN */
|
|
SIO_SET(SIS_EECMD_DONE);
|
|
} else
|
|
#endif
|
|
sis_read_eeprom(sc, (caddr_t)&eaddr,
|
|
SIS_EE_NODEADDR, 3, 0);
|
|
break;
|
|
}
|
|
|
|
sis_add_sysctls(sc);
|
|
|
|
/* Allocate DMA'able memory. */
|
|
if ((error = sis_dma_alloc(sc)) != 0)
|
|
goto fail;
|
|
|
|
ifp = sc->sis_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
error = ENOSPC;
|
|
goto fail;
|
|
}
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = sis_ioctl;
|
|
ifp->if_start = sis_start;
|
|
ifp->if_init = sis_init;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, SIS_TX_LIST_CNT - 1);
|
|
ifp->if_snd.ifq_drv_maxlen = SIS_TX_LIST_CNT - 1;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
if (pci_find_cap(sc->sis_dev, PCIY_PMG, &pmc) == 0) {
|
|
if (sc->sis_type == SIS_TYPE_83815)
|
|
ifp->if_capabilities |= IFCAP_WOL;
|
|
else
|
|
ifp->if_capabilities |= IFCAP_WOL_MAGIC;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
}
|
|
|
|
/*
|
|
* Do MII setup.
|
|
*/
|
|
error = mii_attach(dev, &sc->sis_miibus, ifp, sis_ifmedia_upd,
|
|
sis_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY, 0);
|
|
if (error != 0) {
|
|
device_printf(dev, "attaching PHYs failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, eaddr);
|
|
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
ifp->if_capabilities |= IFCAP_VLAN_MTU;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
#ifdef DEVICE_POLLING
|
|
ifp->if_capabilities |= IFCAP_POLLING;
|
|
#endif
|
|
|
|
/* Hook interrupt last to avoid having to lock softc */
|
|
error = bus_setup_intr(dev, sc->sis_res[1], INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, sis_intr, sc, &sc->sis_intrhand);
|
|
|
|
if (error) {
|
|
device_printf(dev, "couldn't set up irq\n");
|
|
ether_ifdetach(ifp);
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (error)
|
|
sis_detach(dev);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
sis_detach(device_t dev)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
KASSERT(mtx_initialized(&sc->sis_mtx), ("sis mutex not initialized"));
|
|
ifp = sc->sis_ifp;
|
|
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING)
|
|
ether_poll_deregister(ifp);
|
|
#endif
|
|
|
|
/* These should only be active if attach succeeded. */
|
|
if (device_is_attached(dev)) {
|
|
SIS_LOCK(sc);
|
|
sis_stop(sc);
|
|
SIS_UNLOCK(sc);
|
|
callout_drain(&sc->sis_stat_ch);
|
|
ether_ifdetach(ifp);
|
|
}
|
|
if (sc->sis_miibus)
|
|
device_delete_child(dev, sc->sis_miibus);
|
|
bus_generic_detach(dev);
|
|
|
|
if (sc->sis_intrhand)
|
|
bus_teardown_intr(dev, sc->sis_res[1], sc->sis_intrhand);
|
|
bus_release_resources(dev, sis_res_spec, sc->sis_res);
|
|
|
|
if (ifp)
|
|
if_free(ifp);
|
|
|
|
sis_dma_free(sc);
|
|
|
|
mtx_destroy(&sc->sis_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
struct sis_dmamap_arg {
|
|
bus_addr_t sis_busaddr;
|
|
};
|
|
|
|
static void
|
|
sis_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
|
|
{
|
|
struct sis_dmamap_arg *ctx;
|
|
|
|
if (error != 0)
|
|
return;
|
|
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
ctx = (struct sis_dmamap_arg *)arg;
|
|
ctx->sis_busaddr = segs[0].ds_addr;
|
|
}
|
|
|
|
static int
|
|
sis_dma_ring_alloc(struct sis_softc *sc, bus_size_t alignment,
|
|
bus_size_t maxsize, bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map,
|
|
bus_addr_t *paddr, const char *msg)
|
|
{
|
|
struct sis_dmamap_arg ctx;
|
|
int error;
|
|
|
|
error = bus_dma_tag_create(sc->sis_parent_tag, alignment, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, maxsize, 1,
|
|
maxsize, 0, NULL, NULL, tag);
|
|
if (error != 0) {
|
|
device_printf(sc->sis_dev,
|
|
"could not create %s dma tag\n", msg);
|
|
return (ENOMEM);
|
|
}
|
|
/* Allocate DMA'able memory for ring. */
|
|
error = bus_dmamem_alloc(*tag, (void **)ring,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map);
|
|
if (error != 0) {
|
|
device_printf(sc->sis_dev,
|
|
"could not allocate DMA'able memory for %s\n", msg);
|
|
return (ENOMEM);
|
|
}
|
|
/* Load the address of the ring. */
|
|
ctx.sis_busaddr = 0;
|
|
error = bus_dmamap_load(*tag, *map, *ring, maxsize, sis_dmamap_cb,
|
|
&ctx, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
device_printf(sc->sis_dev,
|
|
"could not load DMA'able memory for %s\n", msg);
|
|
return (ENOMEM);
|
|
}
|
|
*paddr = ctx.sis_busaddr;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sis_dma_alloc(struct sis_softc *sc)
|
|
{
|
|
struct sis_rxdesc *rxd;
|
|
struct sis_txdesc *txd;
|
|
int error, i;
|
|
|
|
/* Allocate the parent bus DMA tag appropriate for PCI. */
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sis_dev),
|
|
1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
|
|
NULL, BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT,
|
|
0, NULL, NULL, &sc->sis_parent_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->sis_dev,
|
|
"could not allocate parent dma tag\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Create RX ring. */
|
|
error = sis_dma_ring_alloc(sc, SIS_DESC_ALIGN, SIS_RX_LIST_SZ,
|
|
&sc->sis_rx_list_tag, (uint8_t **)&sc->sis_rx_list,
|
|
&sc->sis_rx_list_map, &sc->sis_rx_paddr, "RX ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Create TX ring. */
|
|
error = sis_dma_ring_alloc(sc, SIS_DESC_ALIGN, SIS_TX_LIST_SZ,
|
|
&sc->sis_tx_list_tag, (uint8_t **)&sc->sis_tx_list,
|
|
&sc->sis_tx_list_map, &sc->sis_tx_paddr, "TX ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Create tag for RX mbufs. */
|
|
error = bus_dma_tag_create(sc->sis_parent_tag, SIS_RX_BUF_ALIGN, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1,
|
|
MCLBYTES, 0, NULL, NULL, &sc->sis_rx_tag);
|
|
if (error) {
|
|
device_printf(sc->sis_dev, "could not allocate RX dma tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create tag for TX mbufs. */
|
|
error = bus_dma_tag_create(sc->sis_parent_tag, 1, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
MCLBYTES * SIS_MAXTXSEGS, SIS_MAXTXSEGS, MCLBYTES, 0, NULL, NULL,
|
|
&sc->sis_tx_tag);
|
|
if (error) {
|
|
device_printf(sc->sis_dev, "could not allocate TX dma tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create DMA maps for RX buffers. */
|
|
error = bus_dmamap_create(sc->sis_rx_tag, 0, &sc->sis_rx_sparemap);
|
|
if (error) {
|
|
device_printf(sc->sis_dev,
|
|
"can't create spare DMA map for RX\n");
|
|
return (error);
|
|
}
|
|
for (i = 0; i < SIS_RX_LIST_CNT; i++) {
|
|
rxd = &sc->sis_rxdesc[i];
|
|
rxd->rx_m = NULL;
|
|
error = bus_dmamap_create(sc->sis_rx_tag, 0, &rxd->rx_dmamap);
|
|
if (error) {
|
|
device_printf(sc->sis_dev,
|
|
"can't create DMA map for RX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* Create DMA maps for TX buffers. */
|
|
for (i = 0; i < SIS_TX_LIST_CNT; i++) {
|
|
txd = &sc->sis_txdesc[i];
|
|
txd->tx_m = NULL;
|
|
error = bus_dmamap_create(sc->sis_tx_tag, 0, &txd->tx_dmamap);
|
|
if (error) {
|
|
device_printf(sc->sis_dev,
|
|
"can't create DMA map for TX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
sis_dma_free(struct sis_softc *sc)
|
|
{
|
|
struct sis_rxdesc *rxd;
|
|
struct sis_txdesc *txd;
|
|
int i;
|
|
|
|
/* Destroy DMA maps for RX buffers. */
|
|
for (i = 0; i < SIS_RX_LIST_CNT; i++) {
|
|
rxd = &sc->sis_rxdesc[i];
|
|
if (rxd->rx_dmamap)
|
|
bus_dmamap_destroy(sc->sis_rx_tag, rxd->rx_dmamap);
|
|
}
|
|
if (sc->sis_rx_sparemap)
|
|
bus_dmamap_destroy(sc->sis_rx_tag, sc->sis_rx_sparemap);
|
|
|
|
/* Destroy DMA maps for TX buffers. */
|
|
for (i = 0; i < SIS_TX_LIST_CNT; i++) {
|
|
txd = &sc->sis_txdesc[i];
|
|
if (txd->tx_dmamap)
|
|
bus_dmamap_destroy(sc->sis_tx_tag, txd->tx_dmamap);
|
|
}
|
|
|
|
if (sc->sis_rx_tag)
|
|
bus_dma_tag_destroy(sc->sis_rx_tag);
|
|
if (sc->sis_tx_tag)
|
|
bus_dma_tag_destroy(sc->sis_tx_tag);
|
|
|
|
/* Destroy RX ring. */
|
|
if (sc->sis_rx_list_map)
|
|
bus_dmamap_unload(sc->sis_rx_list_tag, sc->sis_rx_list_map);
|
|
if (sc->sis_rx_list_map && sc->sis_rx_list)
|
|
bus_dmamem_free(sc->sis_rx_list_tag, sc->sis_rx_list,
|
|
sc->sis_rx_list_map);
|
|
|
|
if (sc->sis_rx_list_tag)
|
|
bus_dma_tag_destroy(sc->sis_rx_list_tag);
|
|
|
|
/* Destroy TX ring. */
|
|
if (sc->sis_tx_list_map)
|
|
bus_dmamap_unload(sc->sis_tx_list_tag, sc->sis_tx_list_map);
|
|
|
|
if (sc->sis_tx_list_map && sc->sis_tx_list)
|
|
bus_dmamem_free(sc->sis_tx_list_tag, sc->sis_tx_list,
|
|
sc->sis_tx_list_map);
|
|
|
|
if (sc->sis_tx_list_tag)
|
|
bus_dma_tag_destroy(sc->sis_tx_list_tag);
|
|
|
|
/* Destroy the parent tag. */
|
|
if (sc->sis_parent_tag)
|
|
bus_dma_tag_destroy(sc->sis_parent_tag);
|
|
}
|
|
|
|
/*
|
|
* Initialize the TX and RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int
|
|
sis_ring_init(struct sis_softc *sc)
|
|
{
|
|
struct sis_rxdesc *rxd;
|
|
struct sis_txdesc *txd;
|
|
bus_addr_t next;
|
|
int error, i;
|
|
|
|
bzero(&sc->sis_tx_list[0], SIS_TX_LIST_SZ);
|
|
for (i = 0; i < SIS_TX_LIST_CNT; i++) {
|
|
txd = &sc->sis_txdesc[i];
|
|
txd->tx_m = NULL;
|
|
if (i == SIS_TX_LIST_CNT - 1)
|
|
next = SIS_TX_RING_ADDR(sc, 0);
|
|
else
|
|
next = SIS_TX_RING_ADDR(sc, i + 1);
|
|
sc->sis_tx_list[i].sis_next = htole32(SIS_ADDR_LO(next));
|
|
}
|
|
sc->sis_tx_prod = sc->sis_tx_cons = sc->sis_tx_cnt = 0;
|
|
bus_dmamap_sync(sc->sis_tx_list_tag, sc->sis_tx_list_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
sc->sis_rx_cons = 0;
|
|
bzero(&sc->sis_rx_list[0], SIS_RX_LIST_SZ);
|
|
for (i = 0; i < SIS_RX_LIST_CNT; i++) {
|
|
rxd = &sc->sis_rxdesc[i];
|
|
rxd->rx_desc = &sc->sis_rx_list[i];
|
|
if (i == SIS_RX_LIST_CNT - 1)
|
|
next = SIS_RX_RING_ADDR(sc, 0);
|
|
else
|
|
next = SIS_RX_RING_ADDR(sc, i + 1);
|
|
rxd->rx_desc->sis_next = htole32(SIS_ADDR_LO(next));
|
|
error = sis_newbuf(sc, rxd);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
bus_dmamap_sync(sc->sis_rx_list_tag, sc->sis_rx_list_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
static int
|
|
sis_newbuf(struct sis_softc *sc, struct sis_rxdesc *rxd)
|
|
{
|
|
struct mbuf *m;
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
int nsegs;
|
|
|
|
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = SIS_RXLEN;
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
m_adj(m, SIS_RX_BUF_ALIGN);
|
|
#endif
|
|
|
|
if (bus_dmamap_load_mbuf_sg(sc->sis_rx_tag, sc->sis_rx_sparemap, m,
|
|
segs, &nsegs, 0) != 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->sis_rx_tag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->sis_rx_tag, rxd->rx_dmamap);
|
|
}
|
|
map = rxd->rx_dmamap;
|
|
rxd->rx_dmamap = sc->sis_rx_sparemap;
|
|
sc->sis_rx_sparemap = map;
|
|
bus_dmamap_sync(sc->sis_rx_tag, rxd->rx_dmamap, BUS_DMASYNC_PREREAD);
|
|
rxd->rx_m = m;
|
|
rxd->rx_desc->sis_ptr = htole32(SIS_ADDR_LO(segs[0].ds_addr));
|
|
rxd->rx_desc->sis_cmdsts = htole32(SIS_RXLEN);
|
|
return (0);
|
|
}
|
|
|
|
static __inline void
|
|
sis_discard_rxbuf(struct sis_rxdesc *rxd)
|
|
{
|
|
|
|
rxd->rx_desc->sis_cmdsts = htole32(SIS_RXLEN);
|
|
}
|
|
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
static __inline void
|
|
sis_fixup_rx(struct mbuf *m)
|
|
{
|
|
uint16_t *src, *dst;
|
|
int i;
|
|
|
|
src = mtod(m, uint16_t *);
|
|
dst = src - (SIS_RX_BUF_ALIGN - ETHER_ALIGN) / sizeof(*src);
|
|
|
|
for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++)
|
|
*dst++ = *src++;
|
|
|
|
m->m_data -= SIS_RX_BUF_ALIGN - ETHER_ALIGN;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static int
|
|
sis_rxeof(struct sis_softc *sc)
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct sis_rxdesc *rxd;
|
|
struct sis_desc *cur_rx;
|
|
int prog, rx_cons, rx_npkts = 0, total_len;
|
|
uint32_t rxstat;
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
bus_dmamap_sync(sc->sis_rx_list_tag, sc->sis_rx_list_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
rx_cons = sc->sis_rx_cons;
|
|
ifp = sc->sis_ifp;
|
|
|
|
for (prog = 0; (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0;
|
|
SIS_INC(rx_cons, SIS_RX_LIST_CNT), prog++) {
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING) {
|
|
if (sc->rxcycles <= 0)
|
|
break;
|
|
sc->rxcycles--;
|
|
}
|
|
#endif
|
|
cur_rx = &sc->sis_rx_list[rx_cons];
|
|
rxstat = le32toh(cur_rx->sis_cmdsts);
|
|
if ((rxstat & SIS_CMDSTS_OWN) == 0)
|
|
break;
|
|
rxd = &sc->sis_rxdesc[rx_cons];
|
|
|
|
total_len = (rxstat & SIS_CMDSTS_BUFLEN) - ETHER_CRC_LEN;
|
|
if ((ifp->if_capenable & IFCAP_VLAN_MTU) != 0 &&
|
|
total_len <= (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN -
|
|
ETHER_CRC_LEN))
|
|
rxstat &= ~SIS_RXSTAT_GIANT;
|
|
if (SIS_RXSTAT_ERROR(rxstat) != 0) {
|
|
ifp->if_ierrors++;
|
|
if (rxstat & SIS_RXSTAT_COLL)
|
|
ifp->if_collisions++;
|
|
sis_discard_rxbuf(rxd);
|
|
continue;
|
|
}
|
|
|
|
/* Add a new receive buffer to the ring. */
|
|
m = rxd->rx_m;
|
|
if (sis_newbuf(sc, rxd) != 0) {
|
|
ifp->if_iqdrops++;
|
|
sis_discard_rxbuf(rxd);
|
|
continue;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
/*
|
|
* On architectures without alignment problems we try to
|
|
* allocate a new buffer for the receive ring, and pass up
|
|
* the one where the packet is already, saving the expensive
|
|
* copy operation.
|
|
*/
|
|
sis_fixup_rx(m);
|
|
#endif
|
|
ifp->if_ipackets++;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
SIS_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
SIS_LOCK(sc);
|
|
rx_npkts++;
|
|
}
|
|
|
|
if (prog > 0) {
|
|
sc->sis_rx_cons = rx_cons;
|
|
bus_dmamap_sync(sc->sis_rx_list_tag, sc->sis_rx_list_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
return (rx_npkts);
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
static void
|
|
sis_txeof(struct sis_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct sis_desc *cur_tx;
|
|
struct sis_txdesc *txd;
|
|
uint32_t cons, txstat;
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
cons = sc->sis_tx_cons;
|
|
if (cons == sc->sis_tx_prod)
|
|
return;
|
|
|
|
ifp = sc->sis_ifp;
|
|
bus_dmamap_sync(sc->sis_tx_list_tag, sc->sis_tx_list_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
for (; cons != sc->sis_tx_prod; SIS_INC(cons, SIS_TX_LIST_CNT)) {
|
|
cur_tx = &sc->sis_tx_list[cons];
|
|
txstat = le32toh(cur_tx->sis_cmdsts);
|
|
if ((txstat & SIS_CMDSTS_OWN) != 0)
|
|
break;
|
|
txd = &sc->sis_txdesc[cons];
|
|
if (txd->tx_m != NULL) {
|
|
bus_dmamap_sync(sc->sis_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sis_tx_tag, txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
if ((txstat & SIS_CMDSTS_PKT_OK) != 0) {
|
|
ifp->if_opackets++;
|
|
ifp->if_collisions +=
|
|
(txstat & SIS_TXSTAT_COLLCNT) >> 16;
|
|
} else {
|
|
ifp->if_oerrors++;
|
|
if (txstat & SIS_TXSTAT_EXCESSCOLLS)
|
|
ifp->if_collisions++;
|
|
if (txstat & SIS_TXSTAT_OUTOFWINCOLL)
|
|
ifp->if_collisions++;
|
|
}
|
|
}
|
|
sc->sis_tx_cnt--;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
}
|
|
sc->sis_tx_cons = cons;
|
|
if (sc->sis_tx_cnt == 0)
|
|
sc->sis_watchdog_timer = 0;
|
|
}
|
|
|
|
static void
|
|
sis_tick(void *xsc)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifnet *ifp;
|
|
|
|
sc = xsc;
|
|
SIS_LOCK_ASSERT(sc);
|
|
ifp = sc->sis_ifp;
|
|
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
mii_tick(mii);
|
|
sis_watchdog(sc);
|
|
if ((sc->sis_flags & SIS_FLAG_LINK) == 0)
|
|
sis_miibus_statchg(sc->sis_dev);
|
|
callout_reset(&sc->sis_stat_ch, hz, sis_tick, sc);
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
static poll_handler_t sis_poll;
|
|
|
|
static int
|
|
sis_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct sis_softc *sc = ifp->if_softc;
|
|
int rx_npkts = 0;
|
|
|
|
SIS_LOCK(sc);
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
SIS_UNLOCK(sc);
|
|
return (rx_npkts);
|
|
}
|
|
|
|
/*
|
|
* On the sis, reading the status register also clears it.
|
|
* So before returning to intr mode we must make sure that all
|
|
* possible pending sources of interrupts have been served.
|
|
* In practice this means run to completion the *eof routines,
|
|
* and then call the interrupt routine
|
|
*/
|
|
sc->rxcycles = count;
|
|
rx_npkts = sis_rxeof(sc);
|
|
sis_txeof(sc);
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
sis_startl(ifp);
|
|
|
|
if (sc->rxcycles > 0 || cmd == POLL_AND_CHECK_STATUS) {
|
|
uint32_t status;
|
|
|
|
/* Reading the ISR register clears all interrupts. */
|
|
status = CSR_READ_4(sc, SIS_ISR);
|
|
|
|
if (status & (SIS_ISR_RX_ERR|SIS_ISR_RX_OFLOW))
|
|
ifp->if_ierrors++;
|
|
|
|
if (status & (SIS_ISR_RX_IDLE))
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
|
|
|
|
if (status & SIS_ISR_SYSERR) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
sis_initl(sc);
|
|
}
|
|
}
|
|
|
|
SIS_UNLOCK(sc);
|
|
return (rx_npkts);
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
|
|
static void
|
|
sis_intr(void *arg)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
uint32_t status;
|
|
|
|
sc = arg;
|
|
ifp = sc->sis_ifp;
|
|
|
|
SIS_LOCK(sc);
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING) {
|
|
SIS_UNLOCK(sc);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Reading the ISR register clears all interrupts. */
|
|
status = CSR_READ_4(sc, SIS_ISR);
|
|
if ((status & SIS_INTRS) == 0) {
|
|
/* Not ours. */
|
|
SIS_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, SIS_IER, 0);
|
|
|
|
for (;(status & SIS_INTRS) != 0;) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
if (status &
|
|
(SIS_ISR_TX_DESC_OK | SIS_ISR_TX_ERR |
|
|
SIS_ISR_TX_OK | SIS_ISR_TX_IDLE) )
|
|
sis_txeof(sc);
|
|
|
|
if (status & (SIS_ISR_RX_DESC_OK | SIS_ISR_RX_OK |
|
|
SIS_ISR_RX_ERR | SIS_ISR_RX_IDLE))
|
|
sis_rxeof(sc);
|
|
|
|
if (status & SIS_ISR_RX_OFLOW)
|
|
ifp->if_ierrors++;
|
|
|
|
if (status & (SIS_ISR_RX_IDLE))
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
|
|
|
|
if (status & SIS_ISR_SYSERR) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
sis_initl(sc);
|
|
SIS_UNLOCK(sc);
|
|
return;
|
|
}
|
|
status = CSR_READ_4(sc, SIS_ISR);
|
|
}
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, SIS_IER, 1);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
sis_startl(ifp);
|
|
}
|
|
|
|
SIS_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int
|
|
sis_encap(struct sis_softc *sc, struct mbuf **m_head)
|
|
{
|
|
struct mbuf *m;
|
|
struct sis_txdesc *txd;
|
|
struct sis_desc *f;
|
|
bus_dma_segment_t segs[SIS_MAXTXSEGS];
|
|
bus_dmamap_t map;
|
|
int error, i, frag, nsegs, prod;
|
|
int padlen;
|
|
|
|
prod = sc->sis_tx_prod;
|
|
txd = &sc->sis_txdesc[prod];
|
|
if ((sc->sis_flags & SIS_FLAG_MANUAL_PAD) != 0 &&
|
|
(*m_head)->m_pkthdr.len < SIS_MIN_FRAMELEN) {
|
|
m = *m_head;
|
|
padlen = SIS_MIN_FRAMELEN - m->m_pkthdr.len;
|
|
if (M_WRITABLE(m) == 0) {
|
|
/* Get a writable copy. */
|
|
m = m_dup(*m_head, M_DONTWAIT);
|
|
m_freem(*m_head);
|
|
if (m == NULL) {
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
}
|
|
if (m->m_next != NULL || M_TRAILINGSPACE(m) < padlen) {
|
|
m = m_defrag(m, M_DONTWAIT);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
}
|
|
/*
|
|
* Manually pad short frames, and zero the pad space
|
|
* to avoid leaking data.
|
|
*/
|
|
bzero(mtod(m, char *) + m->m_pkthdr.len, padlen);
|
|
m->m_pkthdr.len += padlen;
|
|
m->m_len = m->m_pkthdr.len;
|
|
*m_head = m;
|
|
}
|
|
error = bus_dmamap_load_mbuf_sg(sc->sis_tx_tag, txd->tx_dmamap,
|
|
*m_head, segs, &nsegs, 0);
|
|
if (error == EFBIG) {
|
|
m = m_collapse(*m_head, M_DONTWAIT, SIS_MAXTXSEGS);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
error = bus_dmamap_load_mbuf_sg(sc->sis_tx_tag, txd->tx_dmamap,
|
|
*m_head, segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error != 0)
|
|
return (error);
|
|
|
|
/* Check for descriptor overruns. */
|
|
if (sc->sis_tx_cnt + nsegs > SIS_TX_LIST_CNT - 1) {
|
|
bus_dmamap_unload(sc->sis_tx_tag, txd->tx_dmamap);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sis_tx_tag, txd->tx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
|
|
frag = prod;
|
|
for (i = 0; i < nsegs; i++) {
|
|
f = &sc->sis_tx_list[prod];
|
|
if (i == 0)
|
|
f->sis_cmdsts = htole32(segs[i].ds_len |
|
|
SIS_CMDSTS_MORE);
|
|
else
|
|
f->sis_cmdsts = htole32(segs[i].ds_len |
|
|
SIS_CMDSTS_OWN | SIS_CMDSTS_MORE);
|
|
f->sis_ptr = htole32(SIS_ADDR_LO(segs[i].ds_addr));
|
|
SIS_INC(prod, SIS_TX_LIST_CNT);
|
|
sc->sis_tx_cnt++;
|
|
}
|
|
|
|
/* Update producer index. */
|
|
sc->sis_tx_prod = prod;
|
|
|
|
/* Remove MORE flag on the last descriptor. */
|
|
prod = (prod - 1) & (SIS_TX_LIST_CNT - 1);
|
|
f = &sc->sis_tx_list[prod];
|
|
f->sis_cmdsts &= ~htole32(SIS_CMDSTS_MORE);
|
|
|
|
/* Lastly transfer ownership of packet to the controller. */
|
|
f = &sc->sis_tx_list[frag];
|
|
f->sis_cmdsts |= htole32(SIS_CMDSTS_OWN);
|
|
|
|
/* Swap the last and the first dmamaps. */
|
|
map = txd->tx_dmamap;
|
|
txd->tx_dmamap = sc->sis_txdesc[prod].tx_dmamap;
|
|
sc->sis_txdesc[prod].tx_dmamap = map;
|
|
sc->sis_txdesc[prod].tx_m = *m_head;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
sis_start(struct ifnet *ifp)
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
SIS_LOCK(sc);
|
|
sis_startl(ifp);
|
|
SIS_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
sis_startl(struct ifnet *ifp)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mbuf *m_head;
|
|
int queued;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING || (sc->sis_flags & SIS_FLAG_LINK) == 0)
|
|
return;
|
|
|
|
for (queued = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) &&
|
|
sc->sis_tx_cnt < SIS_TX_LIST_CNT - 4;) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (sis_encap(sc, &m_head) != 0) {
|
|
if (m_head == NULL)
|
|
break;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
queued++;
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
BPF_MTAP(ifp, m_head);
|
|
}
|
|
|
|
if (queued) {
|
|
/* Transmit */
|
|
bus_dmamap_sync(sc->sis_tx_list_tag, sc->sis_tx_list_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
sc->sis_watchdog_timer = 5;
|
|
}
|
|
}
|
|
|
|
static void
|
|
sis_init(void *xsc)
|
|
{
|
|
struct sis_softc *sc = xsc;
|
|
|
|
SIS_LOCK(sc);
|
|
sis_initl(sc);
|
|
SIS_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
sis_initl(struct sis_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->sis_ifp;
|
|
struct mii_data *mii;
|
|
uint8_t *eaddr;
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
return;
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
sis_stop(sc);
|
|
/*
|
|
* Reset the chip to a known state.
|
|
*/
|
|
sis_reset(sc);
|
|
#ifdef notyet
|
|
if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr >= NS_SRR_16A) {
|
|
/*
|
|
* Configure 400usec of interrupt holdoff. This is based
|
|
* on emperical tests on a Soekris 4801.
|
|
*/
|
|
CSR_WRITE_4(sc, NS_IHR, 0x100 | 4);
|
|
}
|
|
#endif
|
|
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
|
|
/* Set MAC address */
|
|
eaddr = IF_LLADDR(sc->sis_ifp);
|
|
if (sc->sis_type == SIS_TYPE_83815) {
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR0);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, eaddr[0] | eaddr[1] << 8);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR1);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, eaddr[2] | eaddr[3] << 8);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR2);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, eaddr[4] | eaddr[5] << 8);
|
|
} else {
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, eaddr[0] | eaddr[1] << 8);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR1);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, eaddr[2] | eaddr[3] << 8);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, eaddr[4] | eaddr[5] << 8);
|
|
}
|
|
|
|
/* Init circular TX/RX lists. */
|
|
if (sis_ring_init(sc) != 0) {
|
|
device_printf(sc->sis_dev,
|
|
"initialization failed: no memory for rx buffers\n");
|
|
sis_stop(sc);
|
|
return;
|
|
}
|
|
|
|
if (sc->sis_type == SIS_TYPE_83815 || sc->sis_type == SIS_TYPE_83816) {
|
|
if (sc->sis_manual_pad != 0)
|
|
sc->sis_flags |= SIS_FLAG_MANUAL_PAD;
|
|
else
|
|
sc->sis_flags &= ~SIS_FLAG_MANUAL_PAD;
|
|
}
|
|
|
|
/*
|
|
* Short Cable Receive Errors (MP21.E)
|
|
* also: Page 78 of the DP83815 data sheet (september 2002 version)
|
|
* recommends the following register settings "for optimum
|
|
* performance." for rev 15C. Set this also for 15D parts as
|
|
* they require it in practice.
|
|
*/
|
|
if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr <= NS_SRR_15D) {
|
|
CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001);
|
|
CSR_WRITE_4(sc, NS_PHY_CR, 0x189C);
|
|
/* set val for c2 */
|
|
CSR_WRITE_4(sc, NS_PHY_TDATA, 0x0000);
|
|
/* load/kill c2 */
|
|
CSR_WRITE_4(sc, NS_PHY_DSPCFG, 0x5040);
|
|
/* rais SD off, from 4 to c */
|
|
CSR_WRITE_4(sc, NS_PHY_SDCFG, 0x008C);
|
|
CSR_WRITE_4(sc, NS_PHY_PAGE, 0);
|
|
}
|
|
|
|
sis_rxfilter(sc);
|
|
/* Turn the receive filter on */
|
|
SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ENABLE);
|
|
|
|
/*
|
|
* Load the address of the RX and TX lists.
|
|
*/
|
|
CSR_WRITE_4(sc, SIS_RX_LISTPTR, SIS_ADDR_LO(sc->sis_rx_paddr));
|
|
CSR_WRITE_4(sc, SIS_TX_LISTPTR, SIS_ADDR_LO(sc->sis_tx_paddr));
|
|
|
|
/* SIS_CFG_EDB_MASTER_EN indicates the EDB bus is used instead of
|
|
* the PCI bus. When this bit is set, the Max DMA Burst Size
|
|
* for TX/RX DMA should be no larger than 16 double words.
|
|
*/
|
|
if (CSR_READ_4(sc, SIS_CFG) & SIS_CFG_EDB_MASTER_EN) {
|
|
CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG64);
|
|
} else {
|
|
CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG256);
|
|
}
|
|
|
|
/* Accept Long Packets for VLAN support */
|
|
SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_JABBER);
|
|
|
|
/*
|
|
* Assume 100Mbps link, actual MAC configuration is done
|
|
* after getting a valid link.
|
|
*/
|
|
CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_100);
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, SIS_IMR, SIS_INTRS);
|
|
#ifdef DEVICE_POLLING
|
|
/*
|
|
* ... only enable interrupts if we are not polling, make sure
|
|
* they are off otherwise.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_POLLING)
|
|
CSR_WRITE_4(sc, SIS_IER, 0);
|
|
else
|
|
#endif
|
|
CSR_WRITE_4(sc, SIS_IER, 1);
|
|
|
|
/* Clear MAC disable. */
|
|
SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE | SIS_CSR_RX_DISABLE);
|
|
|
|
sc->sis_flags &= ~SIS_FLAG_LINK;
|
|
mii_mediachg(mii);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
callout_reset(&sc->sis_stat_ch, hz, sis_tick, sc);
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
sis_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
struct mii_softc *miisc;
|
|
int error;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
SIS_LOCK(sc);
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
|
|
PHY_RESET(miisc);
|
|
error = mii_mediachg(mii);
|
|
SIS_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
sis_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
SIS_LOCK(sc);
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
SIS_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
sis_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct sis_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int error = 0, mask;
|
|
|
|
switch (command) {
|
|
case SIOCSIFFLAGS:
|
|
SIS_LOCK(sc);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0 &&
|
|
((ifp->if_flags ^ sc->sis_if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI)) != 0)
|
|
sis_rxfilter(sc);
|
|
else
|
|
sis_initl(sc);
|
|
} else if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
sis_stop(sc);
|
|
sc->sis_if_flags = ifp->if_flags;
|
|
SIS_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
SIS_LOCK(sc);
|
|
sis_rxfilter(sc);
|
|
SIS_UNLOCK(sc);
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
SIS_LOCK(sc);
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
#ifdef DEVICE_POLLING
|
|
if ((mask & IFCAP_POLLING) != 0 &&
|
|
(IFCAP_POLLING & ifp->if_capabilities) != 0) {
|
|
ifp->if_capenable ^= IFCAP_POLLING;
|
|
if ((IFCAP_POLLING & ifp->if_capenable) != 0) {
|
|
error = ether_poll_register(sis_poll, ifp);
|
|
if (error != 0) {
|
|
SIS_UNLOCK(sc);
|
|
break;
|
|
}
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, SIS_IER, 0);
|
|
} else {
|
|
error = ether_poll_deregister(ifp);
|
|
/* Enable interrupts. */
|
|
CSR_WRITE_4(sc, SIS_IER, 1);
|
|
}
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
if ((mask & IFCAP_WOL) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL) != 0) {
|
|
if ((mask & IFCAP_WOL_UCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_UCAST;
|
|
if ((mask & IFCAP_WOL_MCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MCAST;
|
|
if ((mask & IFCAP_WOL_MAGIC) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MAGIC;
|
|
}
|
|
SIS_UNLOCK(sc);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
sis_watchdog(struct sis_softc *sc)
|
|
{
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
if (sc->sis_watchdog_timer == 0 || --sc->sis_watchdog_timer >0)
|
|
return;
|
|
|
|
device_printf(sc->sis_dev, "watchdog timeout\n");
|
|
sc->sis_ifp->if_oerrors++;
|
|
|
|
sc->sis_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
sis_initl(sc);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&sc->sis_ifp->if_snd))
|
|
sis_startl(sc->sis_ifp);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
sis_stop(struct sis_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct sis_rxdesc *rxd;
|
|
struct sis_txdesc *txd;
|
|
int i;
|
|
|
|
SIS_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->sis_ifp;
|
|
sc->sis_watchdog_timer = 0;
|
|
|
|
callout_stop(&sc->sis_stat_ch);
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
CSR_WRITE_4(sc, SIS_IER, 0);
|
|
CSR_WRITE_4(sc, SIS_IMR, 0);
|
|
CSR_READ_4(sc, SIS_ISR); /* clear any interrupts already pending */
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
|
|
DELAY(1000);
|
|
CSR_WRITE_4(sc, SIS_TX_LISTPTR, 0);
|
|
CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0);
|
|
|
|
sc->sis_flags &= ~SIS_FLAG_LINK;
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < SIS_RX_LIST_CNT; i++) {
|
|
rxd = &sc->sis_rxdesc[i];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->sis_rx_tag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->sis_rx_tag, rxd->rx_dmamap);
|
|
m_freem(rxd->rx_m);
|
|
rxd->rx_m = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < SIS_TX_LIST_CNT; i++) {
|
|
txd = &sc->sis_txdesc[i];
|
|
if (txd->tx_m != NULL) {
|
|
bus_dmamap_sync(sc->sis_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sis_tx_tag, txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static int
|
|
sis_shutdown(device_t dev)
|
|
{
|
|
|
|
return (sis_suspend(dev));
|
|
}
|
|
|
|
static int
|
|
sis_suspend(device_t dev)
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
SIS_LOCK(sc);
|
|
sis_stop(sc);
|
|
sis_wol(sc);
|
|
SIS_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sis_resume(device_t dev)
|
|
{
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
SIS_LOCK(sc);
|
|
ifp = sc->sis_ifp;
|
|
if ((ifp->if_flags & IFF_UP) != 0) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
sis_initl(sc);
|
|
}
|
|
SIS_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
sis_wol(struct sis_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
uint32_t val;
|
|
uint16_t pmstat;
|
|
int pmc;
|
|
|
|
ifp = sc->sis_ifp;
|
|
if ((ifp->if_capenable & IFCAP_WOL) == 0)
|
|
return;
|
|
|
|
if (sc->sis_type == SIS_TYPE_83815) {
|
|
/* Reset RXDP. */
|
|
CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0);
|
|
|
|
/* Configure WOL events. */
|
|
CSR_READ_4(sc, NS_WCSR);
|
|
val = 0;
|
|
if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0)
|
|
val |= NS_WCSR_WAKE_UCAST;
|
|
if ((ifp->if_capenable & IFCAP_WOL_MCAST) != 0)
|
|
val |= NS_WCSR_WAKE_MCAST;
|
|
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
|
|
val |= NS_WCSR_WAKE_MAGIC;
|
|
CSR_WRITE_4(sc, NS_WCSR, val);
|
|
/* Enable PME and clear PMESTS. */
|
|
val = CSR_READ_4(sc, NS_CLKRUN);
|
|
val |= NS_CLKRUN_PMEENB | NS_CLKRUN_PMESTS;
|
|
CSR_WRITE_4(sc, NS_CLKRUN, val);
|
|
/* Enable silent RX mode. */
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
|
|
} else {
|
|
if (pci_find_cap(sc->sis_dev, PCIY_PMG, &pmc) != 0)
|
|
return;
|
|
val = 0;
|
|
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
|
|
val |= SIS_PWRMAN_WOL_MAGIC;
|
|
CSR_WRITE_4(sc, SIS_PWRMAN_CTL, val);
|
|
/* Request PME. */
|
|
pmstat = pci_read_config(sc->sis_dev,
|
|
pmc + PCIR_POWER_STATUS, 2);
|
|
pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
|
|
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
|
|
pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
|
|
pci_write_config(sc->sis_dev,
|
|
pmc + PCIR_POWER_STATUS, pmstat, 2);
|
|
}
|
|
}
|
|
|
|
static void
|
|
sis_add_sysctls(struct sis_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
char tn[32];
|
|
int unit;
|
|
|
|
ctx = device_get_sysctl_ctx(sc->sis_dev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->sis_dev));
|
|
|
|
unit = device_get_unit(sc->sis_dev);
|
|
/*
|
|
* Unlike most other controllers, NS DP83815/DP83816 controllers
|
|
* seem to pad with 0xFF when it encounter short frames. According
|
|
* to RFC 1042 the pad bytes should be 0x00. Turning this tunable
|
|
* on will have driver pad manully but it's disabled by default
|
|
* because it will consume extra CPU cycles for short frames.
|
|
*/
|
|
sc->sis_manual_pad = 0;
|
|
snprintf(tn, sizeof(tn), "dev.sis.%d.manual_pad", unit);
|
|
TUNABLE_INT_FETCH(tn, &sc->sis_manual_pad);
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "manual_pad",
|
|
CTLFLAG_RW, &sc->sis_manual_pad, 0, "Manually pad short frames");
|
|
}
|
|
|
|
static device_method_t sis_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, sis_probe),
|
|
DEVMETHOD(device_attach, sis_attach),
|
|
DEVMETHOD(device_detach, sis_detach),
|
|
DEVMETHOD(device_shutdown, sis_shutdown),
|
|
DEVMETHOD(device_suspend, sis_suspend),
|
|
DEVMETHOD(device_resume, sis_resume),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, sis_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, sis_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, sis_miibus_statchg),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t sis_driver = {
|
|
"sis",
|
|
sis_methods,
|
|
sizeof(struct sis_softc)
|
|
};
|
|
|
|
static devclass_t sis_devclass;
|
|
|
|
DRIVER_MODULE(sis, pci, sis_driver, sis_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, sis, miibus_driver, miibus_devclass, 0, 0);
|