freebsd-skq/sys/dev/em/if_em.h
pdeuskar 59699901cf - Added support for receive in multiple
descriptors. This simplifies code for jumbo frames.
- Cleaned up coding conventions to make code more unix-like.
- Cleaned up code in if_em_fxhw.c and if_em_phy.c.
  Added relevant comments.

MFC after:	1 week
2002-02-13 18:19:27 +00:00

281 lines
10 KiB
C

/**************************************************************************
Copyright (c) 2001 Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms of the Software, with or
without modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code of the Software may retain the above
copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form of the Software may reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors shall be used to endorse or promote products derived from
this Software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE INTEL OR ITS CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
***************************************************************************/
/*$FreeBSD$*/
#ifndef _EM_H_DEFINED_
#define _EM_H_DEFINED_
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if_arp.h>
#include <sys/sockio.h>
#include <netinet/in_systm.h>
#include <netinet/in.h>
#include <netinet/ip.h>
#include <netinet/tcp.h>
#include <netinet/udp.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/clock.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include "opt_bdg.h"
#include <dev/em/if_em_fxhw.h>
#include <dev/em/if_em_phy.h>
/* Tunables */
#define MAX_TXD 256
#define MAX_RXD 256
#define TX_CLEANUP_THRESHOLD MAX_TXD / 8
#define TIDV 128
#define RIDV 28
#define DO_AUTO_NEG 1
#define WAIT_FOR_AUTO_NEG_DEFAULT 1
#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
ADVERTISE_1000_FULL)
#define EM_ENABLE_RXCSUM_OFFLOAD 1
#define EM_REPORT_TX_EARLY 2
#define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP)
#define EM_MAX_INTR 3
#define EM_TX_TIMEOUT 5 /* set to 5 seconds */
#define EM_VENDOR_ID 0x8086
#define EM_MMBA 0x0010 /* Mem base address */
#define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1))
#define EM_JUMBO_PBA 0x00000028
#define EM_DEFAULT_PBA 0x00000030
#define IOCTL_CMD_TYPE u_long
#define MAX_NUM_MULTICAST_ADDRESSES 128
#define PCI_ANY_ID (~0U)
#define ETHER_ALIGN 2
/* Defines for printing debug information */
#define DEBUG_INIT 0
#define DEBUG_IOCTL 0
#define DEBUG_HW 0
#define DEBUG_TXRX 0
#define DEBUG_RXCSUM 0
#define DEBUG_TXCSUM 0
#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n")
#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A)
#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B)
#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n")
#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A)
#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B)
#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n")
#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A)
#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B)
#define TXRX_DEBUGOUT(S) if (DEBUG_TXRX) printf(S "\n")
#define TXRX_DEBUGOUT1(S, A) if (DEBUG_TXRX) printf(S "\n", A)
#define TXRX_DEBUGOUT2(S, A, B) if (DEBUG_TXRX) printf(S "\n", A, B)
#define RXCSUM_DEBUGOUT(S) if (DEBUG_RXCSUM) printf(S "\n")
#define RXCSUM_DEBUGOUT1(S, A) if (DEBUG_RXCSUM) printf(S "\n", A)
#define RXCSUM_DEBUGOUT2(S, A, B) if (DEBUG_RXCSUM) printf(S "\n", A, B)
#define TXCSUM_DEBUGOUT(S) if (DEBUG_TXCSUM) printf(S "\n")
#define TXCSUM_DEBUGOUT1(S, A) if (DEBUG_TXCSUM) printf(S "\n", A)
#define TXCSUM_DEBUGOUT2(S, A, B) if (DEBUG_TXCSUM) printf(S "\n", A, B)
/* Device ID defines */
#define PCI_DEVICE_ID_82542 0x1000
#define PCI_DEVICE_ID_82543GC_FIBER 0x1001
#define PCI_DEVICE_ID_82543GC_COPPER 0x1004
#define PCI_DEVICE_ID_82544EI_FIBER 0x1009
#define PCI_DEVICE_ID_82544EI_COPPER 0x1008
#define PCI_DEVICE_ID_82544GC_STRG 0x100C
#define PCI_DEVICE_ID_82544GC_COPPER 0x100D
/* Supported RX Buffer Sizes */
#define EM_RXBUFFER_2048 2048
#define EM_RXBUFFER_4096 4096
#define EM_RXBUFFER_8192 8192
#define EM_RXBUFFER_16384 16384
/* ******************************************************************************
* vendor_info_array
*
* This array contains the list of Subvendor/Subdevice IDs on which the driver
* should load.
*
* ******************************************************************************/
typedef struct _em_vendor_info_t
{
unsigned int vendor_id;
unsigned int device_id;
unsigned int subvendor_id;
unsigned int subdevice_id;
unsigned int index;
} em_vendor_info_t;
struct em_tx_buffer {
STAILQ_ENTRY(em_tx_buffer) em_tx_entry;
struct mbuf *Packet;
u_int32_t NumTxDescriptorsUsed;
};
/* ******************************************************************************
* This structure stores information about the 2k aligned receive buffer
* into which the E1000 DMA's frames.
* ******************************************************************************/
struct em_rx_buffer {
STAILQ_ENTRY(em_rx_buffer) em_rx_entry;
struct mbuf *Packet;
u_int32_t LowPhysicalAddress;
u_int32_t HighPhysicalAddress;
};
typedef enum _XSUM_CONTEXT_T {
OFFLOAD_NONE,
OFFLOAD_TCP_IP,
OFFLOAD_UDP_IP
} XSUM_CONTEXT_T;
/* Our adapter structure */
struct adapter {
struct arpcom interface_data;
struct adapter *next;
struct adapter *prev;
struct em_shared_adapter shared;
/* FreeBSD operating-system-specific structures */
struct em_osdep osdep;
struct device *dev;
struct resource *res_memory;
struct resource *res_interrupt;
void *int_handler_tag;
struct ifmedia media;
struct callout_handle timer_handle;
u_int8_t unit;
/* PCI Info */
u_int16_t VendorId;
u_int16_t DeviceId;
u_int8_t RevId;
u_int16_t SubVendorId;
u_int16_t SubSystemId;
/* Info about the board itself */
uint8_t PermNetAddress[ETH_LENGTH_OF_ADDRESS];
u_int32_t PartNumber;
u_int8_t MulticastAddressList[MAX_NUM_MULTICAST_ADDRESSES][ETH_LENGTH_OF_ADDRESS];
u_int8_t LinkStatusChanged;
u_int8_t LinkIsActive;
u_int16_t LineSpeed;
u_int16_t FullDuplex;
u_int32_t TxIntDelay;
u_int32_t RxIntDelay;
u_int8_t RxChecksum;
XSUM_CONTEXT_T ActiveChecksumContext;
/* Transmit definitions */
struct em_tx_desc *FirstTxDescriptor;
struct em_tx_desc *LastTxDescriptor;
struct em_tx_desc *NextAvailTxDescriptor;
struct em_tx_desc *OldestUsedTxDescriptor;
struct em_tx_desc *TxDescBase;
volatile u_int16_t NumTxDescriptorsAvail;
u_int16_t NumTxDescriptors;
u_int32_t TxdCmd;
struct em_tx_buffer *tx_buffer_area;
STAILQ_HEAD(__em_tx_buffer_free, em_tx_buffer) FreeSwTxPacketList;
STAILQ_HEAD(__em_tx_buffer_used, em_tx_buffer) UsedSwTxPacketList;
/* Receive definitions */
struct em_rx_desc *FirstRxDescriptor;
struct em_rx_desc *LastRxDescriptor;
struct em_rx_desc *NextRxDescriptorToCheck;
struct em_rx_desc *RxDescBase;
u_int16_t NumRxDescriptors;
u_int16_t NumRxDescriptorsEmpty;
u_int16_t NextRxDescriptorToFill;
u_int32_t RxBufferLen;
struct em_rx_buffer *rx_buffer_area;
STAILQ_HEAD(__em_rx_buffer, em_rx_buffer) RxSwPacketList;
/* Jumbo frame */
struct mbuf *fmp;
struct mbuf *lmp;
/* Misc stats maintained by the driver */
unsigned long DroppedPackets;
unsigned long NoJumboBufAvail;
unsigned long JumboMbufFailed;
unsigned long JumboClusterFailed;
unsigned long StdMbufFailed;
unsigned long StdClusterFailed;
#ifdef DBG_STATS
unsigned long NoTxDescAvail;
unsigned long NoPacketsAvail;
unsigned long CleanTxInterrupts;
unsigned long NoTxBufferAvail1;
unsigned long NoTxBufferAvail2;
#endif
struct em_shared_stats stats;
};
#endif /* _EM_H_DEFINED_ */