79e2851dcf
- Disable the support for the second channel on twin-channel EISA cards as the current incarnation can't possibly work correctly (it hasn't worked since switching to new-bus where new-bus allocates the softc). If anyone bothers to test this again it can be fixed properly and brought back. - Use device_printf() and device_get_nameunit() instead of adv_name(). - Remove use of explicit bus space handles and tags. - Use PCI bus accessors and helper routines rather than accessing config registers directly. - Handle failures from adv_attach(). Tested by: no one (hope it works)
435 lines
12 KiB
C
435 lines
12 KiB
C
/*-
|
|
* Device probe and attach routines for the following
|
|
* Advanced Systems Inc. SCSI controllers:
|
|
*
|
|
* Connectivity Products:
|
|
* ABP510/5150 - Bus-Master ISA (240 CDB) *
|
|
* ABP5140 - Bus-Master ISA PnP (16 CDB) * **
|
|
* ABP5142 - Bus-Master ISA PnP with floppy (16 CDB) ***
|
|
*
|
|
* Single Channel Products:
|
|
* ABP542 - Bus-Master ISA with floppy (240 CDB)
|
|
* ABP842 - Bus-Master VL (240 CDB)
|
|
*
|
|
* Dual Channel Products:
|
|
* ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
|
|
*
|
|
* * This board has been shipped by HP with the 4020i CD-R drive.
|
|
* The board has no BIOS so it cannot control a boot device, but
|
|
* it can control any secondary SCSI device.
|
|
* ** This board has been sold by SIIG as the i540 SpeedMaster.
|
|
* *** This board has been sold by SIIG as the i542 SpeedMaster.
|
|
*
|
|
* Copyright (c) 1996, 1997 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <isa/isavar.h>
|
|
|
|
#include <dev/advansys/advansys.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
|
|
#define ADV_ISA_MAX_DMA_ADDR (0x00FFFFFFL)
|
|
#define ADV_ISA_MAX_DMA_COUNT (0x00FFFFFFL)
|
|
|
|
#define ADV_VL_MAX_DMA_ADDR (0x07FFFFFFL)
|
|
#define ADV_VL_MAX_DMA_COUNT (0x07FFFFFFL)
|
|
|
|
/*
|
|
* The overrun buffer shared amongst all ISA/VL adapters.
|
|
*/
|
|
static u_int8_t* overrun_buf;
|
|
static bus_dma_tag_t overrun_dmat;
|
|
static bus_dmamap_t overrun_dmamap;
|
|
static bus_addr_t overrun_physbase;
|
|
|
|
/* Possible port addresses an ISA or VL adapter can live at */
|
|
static u_int16_t adv_isa_ioports[] =
|
|
{
|
|
0x100,
|
|
0x110, /* First selection in BIOS setup */
|
|
0x120,
|
|
0x130, /* Second selection in BIOS setup */
|
|
0x140,
|
|
0x150, /* Third selection in BIOS setup */
|
|
0x190, /* Fourth selection in BIOS setup */
|
|
0x210, /* Fifth selection in BIOS setup */
|
|
0x230, /* Sixth selection in BIOS setup */
|
|
0x250, /* Seventh selection in BIOS setup */
|
|
0x330 /* Eighth and default selection in BIOS setup */
|
|
};
|
|
|
|
#define MAX_ISA_IOPORT_INDEX (sizeof(adv_isa_ioports)/sizeof(u_int16_t) - 1)
|
|
|
|
static int adv_isa_probe(device_t dev);
|
|
static int adv_isa_attach(device_t dev);
|
|
static void adv_set_isapnp_wait_for_key(void);
|
|
static int adv_get_isa_dma_channel(struct adv_softc *adv);
|
|
static int adv_set_isa_dma_settings(struct adv_softc *adv);
|
|
|
|
static int
|
|
adv_isa_probe(device_t dev)
|
|
{
|
|
int port_index;
|
|
int max_port_index;
|
|
u_long iobase, iocount, irq;
|
|
int user_iobase = 0;
|
|
int rid = 0;
|
|
void *ih;
|
|
struct resource *iores, *irqres;
|
|
|
|
/*
|
|
* We don't know of any PnP ID's for these cards.
|
|
*/
|
|
if (isa_get_logicalid(dev) != 0)
|
|
return (ENXIO);
|
|
|
|
/*
|
|
* Default to scanning all possible device locations.
|
|
*/
|
|
port_index = 0;
|
|
max_port_index = MAX_ISA_IOPORT_INDEX;
|
|
|
|
if (bus_get_resource(dev, SYS_RES_IOPORT, 0, &iobase, &iocount) == 0) {
|
|
user_iobase = 1;
|
|
for (;port_index <= max_port_index; port_index++)
|
|
if (iobase <= adv_isa_ioports[port_index])
|
|
break;
|
|
if ((port_index > max_port_index)
|
|
|| (iobase != adv_isa_ioports[port_index])) {
|
|
if (bootverbose)
|
|
device_printf(dev,
|
|
"Invalid baseport of 0x%lx specified. "
|
|
"Nearest valid baseport is 0x%x. Failing "
|
|
"probe.\n", iobase,
|
|
(port_index <= max_port_index) ?
|
|
adv_isa_ioports[port_index] :
|
|
adv_isa_ioports[max_port_index]);
|
|
return ENXIO;
|
|
}
|
|
max_port_index = port_index;
|
|
}
|
|
|
|
/* Perform the actual probing */
|
|
adv_set_isapnp_wait_for_key();
|
|
for (;port_index <= max_port_index; port_index++) {
|
|
u_int16_t port_addr = adv_isa_ioports[port_index];
|
|
bus_size_t maxsegsz;
|
|
bus_size_t maxsize;
|
|
bus_addr_t lowaddr;
|
|
int error;
|
|
struct adv_softc *adv;
|
|
|
|
if (port_addr == 0)
|
|
/* Already been attached */
|
|
continue;
|
|
|
|
if (bus_set_resource(dev, SYS_RES_IOPORT, 0, port_addr, 1))
|
|
continue;
|
|
|
|
/* XXX what is the real portsize? */
|
|
iores = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
|
|
RF_ACTIVE);
|
|
if (iores == NULL)
|
|
continue;
|
|
|
|
if (adv_find_signature(iores) == 0) {
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, iores);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Got one. Now allocate our softc
|
|
* and see if we can initialize the card.
|
|
*/
|
|
adv = adv_alloc(dev, iores, 0);
|
|
if (adv == NULL) {
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, iores);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Stop the chip.
|
|
*/
|
|
ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_HALT);
|
|
ADV_OUTW(adv, ADV_CHIP_STATUS, 0);
|
|
/*
|
|
* Determine the chip version.
|
|
*/
|
|
adv->chip_version = ADV_INB(adv, ADV_NONEISA_CHIP_REVISION);
|
|
if ((adv->chip_version >= ADV_CHIP_MIN_VER_VL)
|
|
&& (adv->chip_version <= ADV_CHIP_MAX_VER_VL)) {
|
|
adv->type = ADV_VL;
|
|
maxsegsz = ADV_VL_MAX_DMA_COUNT;
|
|
maxsize = BUS_SPACE_MAXSIZE_32BIT;
|
|
lowaddr = ADV_VL_MAX_DMA_ADDR;
|
|
bus_delete_resource(dev, SYS_RES_DRQ, 0);
|
|
} else if ((adv->chip_version >= ADV_CHIP_MIN_VER_ISA)
|
|
&& (adv->chip_version <= ADV_CHIP_MAX_VER_ISA)) {
|
|
if (adv->chip_version >= ADV_CHIP_MIN_VER_ISA_PNP) {
|
|
adv->type = ADV_ISAPNP;
|
|
ADV_OUTB(adv, ADV_REG_IFC,
|
|
ADV_IFC_INIT_DEFAULT);
|
|
} else {
|
|
adv->type = ADV_ISA;
|
|
}
|
|
maxsegsz = ADV_ISA_MAX_DMA_COUNT;
|
|
maxsize = BUS_SPACE_MAXSIZE_24BIT;
|
|
lowaddr = ADV_ISA_MAX_DMA_ADDR;
|
|
adv->isa_dma_speed = ADV_DEF_ISA_DMA_SPEED;
|
|
adv->isa_dma_channel = adv_get_isa_dma_channel(adv);
|
|
bus_set_resource(dev, SYS_RES_DRQ, 0,
|
|
adv->isa_dma_channel, 1);
|
|
} else {
|
|
panic("advisaprobe: Unknown card revision\n");
|
|
}
|
|
|
|
/*
|
|
* Allocate a parent dmatag for all tags created
|
|
* by the MI portions of the advansys driver
|
|
*/
|
|
error = bus_dma_tag_create(
|
|
/* parent */ bus_get_dma_tag(dev),
|
|
/* alignemnt */ 1,
|
|
/* boundary */ 0,
|
|
/* lowaddr */ lowaddr,
|
|
/* highaddr */ BUS_SPACE_MAXADDR,
|
|
/* filter */ NULL,
|
|
/* filterarg */ NULL,
|
|
/* maxsize */ maxsize,
|
|
/* nsegments */ ~0,
|
|
/* maxsegsz */ maxsegsz,
|
|
/* flags */ 0,
|
|
/* lockfunc */ NULL,
|
|
/* lockarg */ NULL,
|
|
&adv->parent_dmat);
|
|
|
|
if (error != 0) {
|
|
device_printf(dev,
|
|
"Could not allocate DMA tag - error %d\n", error);
|
|
adv_free(adv);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, iores);
|
|
break;
|
|
}
|
|
|
|
adv->init_level += 2;
|
|
|
|
if (overrun_buf == NULL) {
|
|
/* Need to allocate our overrun buffer */
|
|
if (bus_dma_tag_create(
|
|
/* parent */ adv->parent_dmat,
|
|
/* alignment */ 8,
|
|
/* boundary */ 0,
|
|
/* lowaddr */ ADV_ISA_MAX_DMA_ADDR,
|
|
/* highaddr */ BUS_SPACE_MAXADDR,
|
|
/* filter */ NULL,
|
|
/* filterarg */ NULL,
|
|
/* maxsize */ ADV_OVERRUN_BSIZE,
|
|
/* nsegments */ 1,
|
|
/* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
|
|
/* flags */ 0,
|
|
/* lockfunc */ NULL,
|
|
/* lockarg */ NULL,
|
|
&overrun_dmat) != 0) {
|
|
adv_free(adv);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0,
|
|
iores);
|
|
break;
|
|
}
|
|
if (bus_dmamem_alloc(overrun_dmat,
|
|
(void **)&overrun_buf,
|
|
BUS_DMA_NOWAIT,
|
|
&overrun_dmamap) != 0) {
|
|
bus_dma_tag_destroy(overrun_dmat);
|
|
adv_free(adv);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0,
|
|
iores);
|
|
break;
|
|
}
|
|
/* And permanently map it in */
|
|
bus_dmamap_load(overrun_dmat, overrun_dmamap,
|
|
overrun_buf, ADV_OVERRUN_BSIZE,
|
|
adv_map, &overrun_physbase,
|
|
/*flags*/0);
|
|
}
|
|
|
|
adv->overrun_physbase = overrun_physbase;
|
|
|
|
if (adv_init(adv) != 0) {
|
|
bus_dmamap_unload(overrun_dmat, overrun_dmamap);
|
|
bus_dmamem_free(overrun_dmat, overrun_buf,
|
|
overrun_dmamap);
|
|
bus_dma_tag_destroy(overrun_dmat);
|
|
adv_free(adv);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, iores);
|
|
break;
|
|
}
|
|
|
|
switch (adv->type) {
|
|
case ADV_ISAPNP:
|
|
if (adv->chip_version == ADV_CHIP_VER_ASYN_BUG) {
|
|
adv->bug_fix_control
|
|
|= ADV_BUG_FIX_ASYN_USE_SYN;
|
|
adv->fix_asyn_xfer = ~0;
|
|
}
|
|
/* Fall Through */
|
|
case ADV_ISA:
|
|
adv->max_dma_count = ADV_ISA_MAX_DMA_COUNT;
|
|
adv->max_dma_addr = ADV_ISA_MAX_DMA_ADDR;
|
|
adv_set_isa_dma_settings(adv);
|
|
break;
|
|
|
|
case ADV_VL:
|
|
adv->max_dma_count = ADV_VL_MAX_DMA_COUNT;
|
|
adv->max_dma_addr = ADV_VL_MAX_DMA_ADDR;
|
|
break;
|
|
default:
|
|
panic("advisaprobe: Invalid card type\n");
|
|
}
|
|
|
|
/* Determine our IRQ */
|
|
if (bus_get_resource(dev, SYS_RES_IRQ, 0, &irq, NULL))
|
|
bus_set_resource(dev, SYS_RES_IRQ, 0,
|
|
adv_get_chip_irq(adv), 1);
|
|
else
|
|
adv_set_chip_irq(adv, irq);
|
|
|
|
irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_ACTIVE);
|
|
if (irqres == NULL ||
|
|
bus_setup_intr(dev, irqres, INTR_TYPE_CAM|INTR_ENTROPY|
|
|
INTR_MPSAFE, NULL, adv_intr, adv, &ih) != 0) {
|
|
if (irqres != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid,
|
|
irqres);
|
|
bus_dmamap_unload(overrun_dmat, overrun_dmamap);
|
|
bus_dmamem_free(overrun_dmat, overrun_buf,
|
|
overrun_dmamap);
|
|
bus_dma_tag_destroy(overrun_dmat);
|
|
adv_free(adv);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, iores);
|
|
break;
|
|
}
|
|
|
|
/* Mark as probed */
|
|
adv_isa_ioports[port_index] = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (user_iobase)
|
|
bus_set_resource(dev, SYS_RES_IOPORT, 0, iobase, iocount);
|
|
else
|
|
bus_delete_resource(dev, SYS_RES_IOPORT, 0);
|
|
|
|
return ENXIO;
|
|
}
|
|
|
|
static int
|
|
adv_isa_attach(device_t dev)
|
|
{
|
|
struct adv_softc *adv = device_get_softc(dev);
|
|
|
|
return (adv_attach(adv));
|
|
}
|
|
|
|
static int
|
|
adv_get_isa_dma_channel(struct adv_softc *adv)
|
|
{
|
|
int channel;
|
|
|
|
channel = ADV_INW(adv, ADV_CONFIG_LSW) & ADV_CFG_LSW_ISA_DMA_CHANNEL;
|
|
if (channel == 0x03)
|
|
return (0);
|
|
else if (channel == 0x00)
|
|
return (7);
|
|
return (channel + 4);
|
|
}
|
|
|
|
static int
|
|
adv_set_isa_dma_settings(struct adv_softc *adv)
|
|
{
|
|
u_int16_t cfg_lsw;
|
|
u_int8_t value;
|
|
|
|
if ((adv->isa_dma_channel >= 5) && (adv->isa_dma_channel <= 7)) {
|
|
if (adv->isa_dma_channel == 7)
|
|
value = 0x00;
|
|
else
|
|
value = adv->isa_dma_channel - 4;
|
|
cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW)
|
|
& ~ADV_CFG_LSW_ISA_DMA_CHANNEL;
|
|
cfg_lsw |= value;
|
|
ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw);
|
|
|
|
adv->isa_dma_speed &= 0x07;
|
|
adv_set_bank(adv, 1);
|
|
ADV_OUTB(adv, ADV_DMA_SPEED, adv->isa_dma_speed);
|
|
adv_set_bank(adv, 0);
|
|
isa_dmacascade(adv->isa_dma_channel);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
adv_set_isapnp_wait_for_key(void)
|
|
{
|
|
static int isapnp_wait_set = 0;
|
|
if (isapnp_wait_set == 0) {
|
|
outb(ADV_ISA_PNP_PORT_ADDR, 0x02);
|
|
outb(ADV_ISA_PNP_PORT_WRITE, 0x02);
|
|
isapnp_wait_set++;
|
|
}
|
|
}
|
|
|
|
static device_method_t adv_isa_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, adv_isa_probe),
|
|
DEVMETHOD(device_attach, adv_isa_attach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t adv_isa_driver = {
|
|
"adv", adv_isa_methods, sizeof(struct adv_softc)
|
|
};
|
|
|
|
static devclass_t adv_isa_devclass;
|
|
DRIVER_MODULE(adv, isa, adv_isa_driver, adv_isa_devclass, 0, 0);
|
|
MODULE_DEPEND(adv, isa, 1, 1, 1);
|