1458cde760
Change the ID in if_aue.c to match the new name in usbdevs.h.
1571 lines
36 KiB
C
1571 lines
36 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999, 2000
|
|
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* ADMtek AN986 Pegasus USB to ethernet driver. Datasheet is available
|
|
* from http://www.admtek.com.tw.
|
|
*
|
|
* Written by Bill Paul <wpaul@ee.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The Pegasus chip uses four USB "endpoints" to provide 10/100 ethernet
|
|
* support: the control endpoint for reading/writing registers, burst
|
|
* read endpoint for packet reception, burst write for packet transmission
|
|
* and one for "interrupts." The chip uses the same RX filter scheme
|
|
* as the other ADMtek ethernet parts: one perfect filter entry for the
|
|
* the station address and a 64-bit multicast hash table. The chip supports
|
|
* both MII and HomePNA attachments.
|
|
*
|
|
* Since the maximum data transfer speed of USB is supposed to be 12Mbps,
|
|
* you're never really going to get 100Mbps speeds from this device. I
|
|
* think the idea is to allow the device to connect to 10 or 100Mbps
|
|
* networks, not necessarily to provide 100Mbps performance. Also, since
|
|
* the controller uses an external PHY chip, it's possible that board
|
|
* designers might simply choose a 10Mbps PHY.
|
|
*
|
|
* Registers are accessed using usbd_do_request(). Packet transfers are
|
|
* done using usbd_transfer() and friends.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbdivar.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
#include <dev/usb/usb_ethersubr.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/usb/if_auereg.h>
|
|
|
|
MODULE_DEPEND(aue, miibus, 1, 1, 1);
|
|
|
|
/* "controller miibus0" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$FreeBSD$";
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/products.
|
|
*/
|
|
Static struct aue_type aue_devs[] = {
|
|
{ USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS },
|
|
{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100 },
|
|
{ USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX1 },
|
|
{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650 },
|
|
{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX },
|
|
{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX_PNA },
|
|
{ USB_VENDOR_SMC, USB_PRODUCT_SMC_2202USB },
|
|
{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX },
|
|
{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TA },
|
|
{ USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TX },
|
|
{ USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_KNU101TX, },
|
|
{ 0, 0 }
|
|
};
|
|
|
|
Static struct usb_qdat aue_qdat;
|
|
|
|
Static int aue_match __P((device_t));
|
|
Static int aue_attach __P((device_t));
|
|
Static int aue_detach __P((device_t));
|
|
|
|
Static int aue_tx_list_init __P((struct aue_softc *));
|
|
Static int aue_rx_list_init __P((struct aue_softc *));
|
|
Static int aue_newbuf __P((struct aue_softc *, struct aue_chain *,
|
|
struct mbuf *));
|
|
Static int aue_encap __P((struct aue_softc *, struct mbuf *, int));
|
|
#ifdef AUE_INTR_PIPE
|
|
Static void aue_intr __P((usbd_xfer_handle,
|
|
usbd_private_handle, usbd_status));
|
|
#endif
|
|
Static void aue_rxeof __P((usbd_xfer_handle,
|
|
usbd_private_handle, usbd_status));
|
|
Static void aue_txeof __P((usbd_xfer_handle,
|
|
usbd_private_handle, usbd_status));
|
|
Static void aue_tick __P((void *));
|
|
Static void aue_rxstart __P((struct ifnet *));
|
|
Static void aue_start __P((struct ifnet *));
|
|
Static int aue_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
Static void aue_init __P((void *));
|
|
Static void aue_stop __P((struct aue_softc *));
|
|
Static void aue_watchdog __P((struct ifnet *));
|
|
Static void aue_shutdown __P((device_t));
|
|
Static int aue_ifmedia_upd __P((struct ifnet *));
|
|
Static void aue_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
Static void aue_eeprom_getword __P((struct aue_softc *, int, u_int16_t *));
|
|
Static void aue_read_eeprom __P((struct aue_softc *, caddr_t, int,
|
|
int, int));
|
|
Static int aue_miibus_readreg __P((device_t, int, int));
|
|
Static int aue_miibus_writereg __P((device_t, int, int, int));
|
|
Static void aue_miibus_statchg __P((device_t));
|
|
|
|
Static void aue_setmulti __P((struct aue_softc *));
|
|
Static u_int32_t aue_crc __P((caddr_t));
|
|
Static void aue_reset __P((struct aue_softc *));
|
|
|
|
Static int csr_read_1 __P((struct aue_softc *, int));
|
|
Static int csr_write_1 __P((struct aue_softc *, int, int));
|
|
Static int csr_read_2 __P((struct aue_softc *, int));
|
|
Static int csr_write_2 __P((struct aue_softc *, int, int));
|
|
|
|
Static device_method_t aue_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, aue_match),
|
|
DEVMETHOD(device_attach, aue_attach),
|
|
DEVMETHOD(device_detach, aue_detach),
|
|
DEVMETHOD(device_shutdown, aue_shutdown),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, aue_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, aue_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, aue_miibus_statchg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
Static driver_t aue_driver = {
|
|
"aue",
|
|
aue_methods,
|
|
sizeof(struct aue_softc)
|
|
};
|
|
|
|
Static devclass_t aue_devclass;
|
|
|
|
DRIVER_MODULE(if_aue, uhub, aue_driver, aue_devclass, usbd_driver_load, 0);
|
|
DRIVER_MODULE(miibus, aue, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
#define AUE_SETBIT(sc, reg, x) \
|
|
csr_write_1(sc, reg, csr_read_1(sc, reg) | (x))
|
|
|
|
#define AUE_CLRBIT(sc, reg, x) \
|
|
csr_write_1(sc, reg, csr_read_1(sc, reg) & ~(x))
|
|
|
|
Static int csr_read_1(sc, reg)
|
|
struct aue_softc *sc;
|
|
int reg;
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
u_int8_t val = 0;
|
|
|
|
if (sc->aue_gone)
|
|
return(0);
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_READREG;
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 1);
|
|
|
|
err = usbd_do_request_flags(sc->aue_udev, &req,
|
|
&val, USBD_NO_TSLEEP, NULL);
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
if (err)
|
|
return(0);
|
|
|
|
return(val);
|
|
}
|
|
|
|
Static int csr_read_2(sc, reg)
|
|
struct aue_softc *sc;
|
|
int reg;
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
u_int16_t val = 0;
|
|
|
|
if (sc->aue_gone)
|
|
return(0);
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_READREG;
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 2);
|
|
|
|
err = usbd_do_request_flags(sc->aue_udev, &req,
|
|
&val, USBD_NO_TSLEEP, NULL);
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
if (err)
|
|
return(0);
|
|
|
|
return(val);
|
|
}
|
|
|
|
Static int csr_write_1(sc, reg, val)
|
|
struct aue_softc *sc;
|
|
int reg, val;
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
|
|
if (sc->aue_gone)
|
|
return(0);
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_WRITEREG;
|
|
USETW(req.wValue, val);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 1);
|
|
|
|
err = usbd_do_request_flags(sc->aue_udev, &req,
|
|
&val, USBD_NO_TSLEEP, NULL);
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
if (err)
|
|
return(-1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
Static int csr_write_2(sc, reg, val)
|
|
struct aue_softc *sc;
|
|
int reg, val;
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
|
|
if (sc->aue_gone)
|
|
return(0);
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_WRITEREG;
|
|
USETW(req.wValue, val);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 2);
|
|
|
|
err = usbd_do_request_flags(sc->aue_udev, &req,
|
|
&val, USBD_NO_TSLEEP, NULL);
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
if (err)
|
|
return(-1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
Static void aue_eeprom_getword(sc, addr, dest)
|
|
struct aue_softc *sc;
|
|
int addr;
|
|
u_int16_t *dest;
|
|
{
|
|
register int i;
|
|
u_int16_t word = 0;
|
|
|
|
csr_write_1(sc, AUE_EE_REG, addr);
|
|
csr_write_1(sc, AUE_EE_CTL, AUE_EECTL_READ);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (csr_read_1(sc, AUE_EE_CTL) &
|
|
AUE_EECTL_DONE)
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT) {
|
|
printf("aue%d: EEPROM read timed out\n",
|
|
sc->aue_unit);
|
|
}
|
|
|
|
word = csr_read_2(sc, AUE_EE_DATA);
|
|
*dest = word;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
Static void aue_read_eeprom(sc, dest, off, cnt, swap)
|
|
struct aue_softc *sc;
|
|
caddr_t dest;
|
|
int off;
|
|
int cnt;
|
|
int swap;
|
|
{
|
|
int i;
|
|
u_int16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
aue_eeprom_getword(sc, off + i, &word);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
Static int aue_miibus_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct aue_softc *sc;
|
|
int i;
|
|
u_int16_t val = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* The Am79C901 HomePNA PHY actually contains
|
|
* two transceivers: a 1Mbps HomePNA PHY and a
|
|
* 10Mbps full/half duplex ethernet PHY with
|
|
* NWAY autoneg. However in the ADMtek adapter,
|
|
* only the 1Mbps PHY is actually connected to
|
|
* anything, so we ignore the 10Mbps one. It
|
|
* happens to be configured for MII address 3,
|
|
* so we filter that out.
|
|
*/
|
|
if (sc->aue_info->aue_vid == USB_VENDOR_ADMTEK &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_ADMTEK_PEGASUS) {
|
|
if (phy == 3)
|
|
return(0);
|
|
#ifdef notdef
|
|
if (phy != 1)
|
|
return(0);
|
|
#endif
|
|
}
|
|
|
|
csr_write_1(sc, AUE_PHY_ADDR, phy);
|
|
csr_write_1(sc, AUE_PHY_CTL, reg|AUE_PHYCTL_READ);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (csr_read_1(sc, AUE_PHY_CTL) &
|
|
AUE_PHYCTL_DONE)
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT) {
|
|
printf("aue%d: MII read timed out\n",
|
|
sc->aue_unit);
|
|
}
|
|
|
|
val = csr_read_2(sc, AUE_PHY_DATA);
|
|
|
|
return(val);
|
|
}
|
|
|
|
Static int aue_miibus_writereg(dev, phy, reg, data)
|
|
device_t dev;
|
|
int phy, reg, data;
|
|
{
|
|
struct aue_softc *sc;
|
|
int i;
|
|
|
|
if (phy == 3)
|
|
return(0);
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
csr_write_2(sc, AUE_PHY_DATA, data);
|
|
csr_write_1(sc, AUE_PHY_ADDR, phy);
|
|
csr_write_1(sc, AUE_PHY_CTL, reg|AUE_PHYCTL_WRITE);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (csr_read_1(sc, AUE_PHY_CTL) &
|
|
AUE_PHYCTL_DONE)
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT) {
|
|
printf("aue%d: MII read timed out\n",
|
|
sc->aue_unit);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
Static void aue_miibus_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->aue_miibus);
|
|
|
|
AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB|AUE_CTL0_TX_ENB);
|
|
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
|
|
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
|
|
} else {
|
|
AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
|
|
}
|
|
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
|
|
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
|
|
} else {
|
|
AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
|
|
}
|
|
AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB|AUE_CTL0_TX_ENB);
|
|
|
|
/*
|
|
* Set the LED modes on the LinkSys adapter.
|
|
* This turns on the 'dual link LED' bin in the auxmode
|
|
* register of the Broadcom PHY.
|
|
*/
|
|
if ((sc->aue_info->aue_vid == USB_VENDOR_LINKSYS &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_LINKSYS_USB100TX) ||
|
|
(sc->aue_info->aue_vid == USB_VENDOR_LINKSYS &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_LINKSYS_USB10TA) ||
|
|
(sc->aue_info->aue_vid == USB_VENDOR_DLINK &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_DLINK_DSB650TX) ||
|
|
(sc->aue_info->aue_vid == USB_VENDOR_DLINK &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_DLINK_DSB650)) {
|
|
u_int16_t auxmode;
|
|
auxmode = aue_miibus_readreg(dev, 0, 0x1b);
|
|
aue_miibus_writereg(dev, 0, 0x1b, auxmode | 0x04);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
#define AUE_POLY 0xEDB88320
|
|
#define AUE_BITS 6
|
|
|
|
Static u_int32_t aue_crc(addr)
|
|
caddr_t addr;
|
|
{
|
|
u_int32_t idx, bit, data, crc;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
|
|
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? AUE_POLY : 0);
|
|
}
|
|
|
|
return (crc & ((1 << AUE_BITS) - 1));
|
|
}
|
|
|
|
Static void aue_setmulti(sc)
|
|
struct aue_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
u_int32_t h = 0, i;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
|
|
return;
|
|
}
|
|
|
|
AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
|
|
|
|
/* first, zot all the existing hash bits */
|
|
for (i = 0; i < 8; i++)
|
|
csr_write_1(sc, AUE_MAR0 + i, 0);
|
|
|
|
/* now program new ones */
|
|
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = aue_crc(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
AUE_SETBIT(sc, AUE_MAR + (h >> 3), 1 << (h & 0x7));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
Static void aue_reset(sc)
|
|
struct aue_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_RESETMAC);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (!(csr_read_1(sc, AUE_CTL1) & AUE_CTL1_RESETMAC))
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT)
|
|
printf("aue%d: reset failed\n", sc->aue_unit);
|
|
|
|
/*
|
|
* The PHY(s) attached to the Pegasus chip may be held
|
|
* in reset until we flip on the GPIO outputs. Make sure
|
|
* to set the GPIO pins high so that the PHY(s) will
|
|
* be enabled.
|
|
*
|
|
* Note: We force all of the GPIO pins low first, *then*
|
|
* enable the ones we want.
|
|
*/
|
|
csr_write_1(sc, AUE_GPIO0, AUE_GPIO_OUT0|AUE_GPIO_SEL0);
|
|
csr_write_1(sc, AUE_GPIO0, AUE_GPIO_OUT0|AUE_GPIO_SEL0|AUE_GPIO_SEL1);
|
|
|
|
/* Grrr. LinkSys has to be different from everyone else. */
|
|
if ((sc->aue_info->aue_vid == USB_VENDOR_LINKSYS &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_LINKSYS_USB100TX) ||
|
|
(sc->aue_info->aue_vid == USB_VENDOR_LINKSYS &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_LINKSYS_USB10TA) ||
|
|
(sc->aue_info->aue_vid == USB_VENDOR_DLINK &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_DLINK_DSB650TX) ||
|
|
(sc->aue_info->aue_vid == USB_VENDOR_DLINK &&
|
|
sc->aue_info->aue_did == USB_PRODUCT_DLINK_DSB650)) {
|
|
csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1);
|
|
csr_write_1(sc, AUE_GPIO0, AUE_GPIO_SEL0|AUE_GPIO_SEL1|
|
|
AUE_GPIO_OUT0);
|
|
}
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(10000);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for a Pegasus chip.
|
|
*/
|
|
USB_MATCH(aue)
|
|
{
|
|
USB_MATCH_START(aue, uaa);
|
|
struct aue_type *t;
|
|
|
|
if (!uaa->iface)
|
|
return(UMATCH_NONE);
|
|
|
|
t = aue_devs;
|
|
while(t->aue_vid) {
|
|
if (uaa->vendor == t->aue_vid &&
|
|
uaa->product == t->aue_did) {
|
|
return(UMATCH_VENDOR_PRODUCT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(UMATCH_NONE);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
USB_ATTACH(aue)
|
|
{
|
|
USB_ATTACH_START(aue, sc, uaa);
|
|
char devinfo[1024];
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
struct ifnet *ifp;
|
|
usb_interface_descriptor_t *id;
|
|
usb_endpoint_descriptor_t *ed;
|
|
int i;
|
|
struct aue_type *t;
|
|
|
|
bzero(sc, sizeof(struct aue_softc));
|
|
sc->aue_iface = uaa->iface;
|
|
sc->aue_udev = uaa->device;
|
|
sc->aue_unit = device_get_unit(self);
|
|
|
|
if (usbd_set_config_no(sc->aue_udev, AUE_CONFIG_NO, 0)) {
|
|
printf("aue%d: getting interface handle failed\n",
|
|
sc->aue_unit);
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
|
|
t = aue_devs;
|
|
while(t->aue_vid) {
|
|
if (uaa->vendor == t->aue_vid &&
|
|
uaa->product == t->aue_did) {
|
|
sc->aue_info = t;
|
|
break;
|
|
}
|
|
t++;
|
|
}
|
|
|
|
id = usbd_get_interface_descriptor(uaa->iface);
|
|
|
|
usbd_devinfo(uaa->device, 0, devinfo);
|
|
device_set_desc_copy(self, devinfo);
|
|
printf("%s: %s\n", USBDEVNAME(self), devinfo);
|
|
|
|
/* Find endpoints. */
|
|
for (i = 0; i < id->bNumEndpoints; i++) {
|
|
ed = usbd_interface2endpoint_descriptor(uaa->iface, i);
|
|
if (!ed) {
|
|
printf("aue%d: couldn't get ep %d\n",
|
|
sc->aue_unit, i);
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
|
|
sc->aue_ed[AUE_ENDPT_RX] = ed->bEndpointAddress;
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
|
|
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
|
|
sc->aue_ed[AUE_ENDPT_TX] = ed->bEndpointAddress;
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
|
|
sc->aue_ed[AUE_ENDPT_INTR] = ed->bEndpointAddress;
|
|
}
|
|
}
|
|
|
|
mtx_init(&sc->aue_mtx, device_get_nameunit(self), MTX_DEF);
|
|
AUE_LOCK(sc);
|
|
|
|
/* Reset the adapter. */
|
|
aue_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
aue_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 0);
|
|
|
|
/*
|
|
* A Pegasus chip was detected. Inform the world.
|
|
*/
|
|
printf("aue%d: Ethernet address: %6D\n", sc->aue_unit, eaddr, ":");
|
|
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = sc->aue_unit;
|
|
ifp->if_name = "aue";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = aue_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = aue_start;
|
|
ifp->if_watchdog = aue_watchdog;
|
|
ifp->if_init = aue_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
|
|
|
|
/*
|
|
* Do MII setup.
|
|
* NOTE: Doing this causes child devices to be attached to us,
|
|
* which we would normally disconnect at in the detach routine
|
|
* using device_delete_child(). However the USB code is set up
|
|
* such that when this driver is removed, all children devices
|
|
* are removed as well. In effect, the USB code ends up detaching
|
|
* all of our children for us, so we don't have to do is ourselves
|
|
* in aue_detach(). It's important to point this out since if
|
|
* we *do* try to detach the child devices ourselves, we will
|
|
* end up getting the children deleted twice, which will crash
|
|
* the system.
|
|
*/
|
|
if (mii_phy_probe(self, &sc->aue_miibus,
|
|
aue_ifmedia_upd, aue_ifmedia_sts)) {
|
|
printf("aue%d: MII without any PHY!\n", sc->aue_unit);
|
|
AUE_UNLOCK(sc);
|
|
mtx_destroy(&sc->aue_mtx);
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
|
|
aue_qdat.ifp = ifp;
|
|
aue_qdat.if_rxstart = aue_rxstart;
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
|
|
callout_handle_init(&sc->aue_stat_ch);
|
|
usb_register_netisr();
|
|
sc->aue_gone = 0;
|
|
|
|
AUE_UNLOCK(sc);
|
|
USB_ATTACH_SUCCESS_RETURN;
|
|
}
|
|
|
|
Static int aue_detach(dev)
|
|
device_t dev;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
AUE_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
sc->aue_gone = 1;
|
|
untimeout(aue_tick, sc, sc->aue_stat_ch);
|
|
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
|
|
|
|
if (sc->aue_ep[AUE_ENDPT_TX] != NULL)
|
|
usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (sc->aue_ep[AUE_ENDPT_RX] != NULL)
|
|
usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_RX]);
|
|
#ifdef AUE_INTR_PIPE
|
|
if (sc->aue_ep[AUE_ENDPT_INTR] != NULL)
|
|
usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_INTR]);
|
|
#endif
|
|
|
|
AUE_UNLOCK(sc);
|
|
mtx_destroy(&sc->aue_mtx);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
Static int aue_newbuf(sc, c, m)
|
|
struct aue_softc *sc;
|
|
struct aue_chain *c;
|
|
struct mbuf *m;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
if (m == NULL) {
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("aue%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->aue_unit);
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("aue%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->aue_unit);
|
|
m_freem(m_new);
|
|
return(ENOBUFS);
|
|
}
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
} else {
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_adj(m_new, ETHER_ALIGN);
|
|
c->aue_mbuf = m_new;
|
|
|
|
return(0);
|
|
}
|
|
|
|
Static int aue_rx_list_init(sc)
|
|
struct aue_softc *sc;
|
|
{
|
|
struct aue_cdata *cd;
|
|
struct aue_chain *c;
|
|
int i;
|
|
|
|
cd = &sc->aue_cdata;
|
|
for (i = 0; i < AUE_RX_LIST_CNT; i++) {
|
|
c = &cd->aue_rx_chain[i];
|
|
c->aue_sc = sc;
|
|
c->aue_idx = i;
|
|
if (aue_newbuf(sc, c, NULL) == ENOBUFS)
|
|
return(ENOBUFS);
|
|
if (c->aue_xfer == NULL) {
|
|
c->aue_xfer = usbd_alloc_xfer(sc->aue_udev);
|
|
if (c->aue_xfer == NULL)
|
|
return(ENOBUFS);
|
|
}
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
Static int aue_tx_list_init(sc)
|
|
struct aue_softc *sc;
|
|
{
|
|
struct aue_cdata *cd;
|
|
struct aue_chain *c;
|
|
int i;
|
|
|
|
cd = &sc->aue_cdata;
|
|
for (i = 0; i < AUE_TX_LIST_CNT; i++) {
|
|
c = &cd->aue_tx_chain[i];
|
|
c->aue_sc = sc;
|
|
c->aue_idx = i;
|
|
c->aue_mbuf = NULL;
|
|
if (c->aue_xfer == NULL) {
|
|
c->aue_xfer = usbd_alloc_xfer(sc->aue_udev);
|
|
if (c->aue_xfer == NULL)
|
|
return(ENOBUFS);
|
|
}
|
|
c->aue_buf = malloc(AUE_BUFSZ, M_USBDEV, M_NOWAIT);
|
|
if (c->aue_buf == NULL)
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
#ifdef AUE_INTR_PIPE
|
|
Static void aue_intr(xfer, priv, status)
|
|
usbd_xfer_handle xfer;
|
|
usbd_private_handle priv;
|
|
usbd_status status;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct ifnet *ifp;
|
|
struct aue_intrpkt *p;
|
|
|
|
sc = priv;
|
|
AUE_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (!(ifp->if_flags & IFF_RUNNING)) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
printf("aue%d: usb error on intr: %s\n", sc->aue_unit,
|
|
usbd_errstr(status));
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_RX]);
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
usbd_get_xfer_status(xfer, NULL, (void **)&p, NULL, NULL);
|
|
|
|
if (p->aue_txstat0)
|
|
ifp->if_oerrors++;
|
|
|
|
if (p->aue_txstat0 & (AUE_TXSTAT0_LATECOLL & AUE_TXSTAT0_EXCESSCOLL))
|
|
ifp->if_collisions++;
|
|
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
Static void aue_rxstart(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct aue_chain *c;
|
|
|
|
sc = ifp->if_softc;
|
|
AUE_LOCK(sc);
|
|
c = &sc->aue_cdata.aue_rx_chain[sc->aue_cdata.aue_rx_prod];
|
|
|
|
if (aue_newbuf(sc, c, NULL) == ENOBUFS) {
|
|
ifp->if_ierrors++;
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Setup new transfer. */
|
|
usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_RX],
|
|
c, mtod(c->aue_mbuf, char *), AUE_BUFSZ, USBD_SHORT_XFER_OK,
|
|
USBD_NO_TIMEOUT, aue_rxeof);
|
|
usbd_transfer(c->aue_xfer);
|
|
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
Static void aue_rxeof(xfer, priv, status)
|
|
usbd_xfer_handle xfer;
|
|
usbd_private_handle priv;
|
|
usbd_status status;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct aue_chain *c;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
int total_len = 0;
|
|
struct aue_rxpkt r;
|
|
|
|
c = priv;
|
|
sc = c->aue_sc;
|
|
if (sc->aue_gone)
|
|
return;
|
|
AUE_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (!(ifp->if_flags & IFF_RUNNING)) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
printf("aue%d: usb error on rx: %s\n", sc->aue_unit,
|
|
usbd_errstr(status));
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_RX]);
|
|
goto done;
|
|
}
|
|
|
|
usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
|
|
|
|
if (total_len <= 4 + ETHER_CRC_LEN) {
|
|
ifp->if_ierrors++;
|
|
goto done;
|
|
}
|
|
|
|
m = c->aue_mbuf;
|
|
bcopy(mtod(m, char *) + total_len - 4, (char *)&r, sizeof(r));
|
|
|
|
/* Turn off all the non-error bits in the rx status word. */
|
|
r.aue_rxstat &= AUE_RXSTAT_MASK;
|
|
|
|
if (r.aue_rxstat) {
|
|
ifp->if_ierrors++;
|
|
goto done;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
total_len -= (4 + ETHER_CRC_LEN);
|
|
|
|
ifp->if_ipackets++;
|
|
m->m_pkthdr.rcvif = (struct ifnet *)&aue_qdat;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
|
|
/* Put the packet on the special USB input queue. */
|
|
usb_ether_input(m);
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
done:
|
|
|
|
/* Setup new transfer. */
|
|
usbd_setup_xfer(xfer, sc->aue_ep[AUE_ENDPT_RX],
|
|
c, mtod(c->aue_mbuf, char *), AUE_BUFSZ, USBD_SHORT_XFER_OK,
|
|
USBD_NO_TIMEOUT, aue_rxeof);
|
|
usbd_transfer(xfer);
|
|
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
Static void aue_txeof(xfer, priv, status)
|
|
usbd_xfer_handle xfer;
|
|
usbd_private_handle priv;
|
|
usbd_status status;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct aue_chain *c;
|
|
struct ifnet *ifp;
|
|
usbd_status err;
|
|
|
|
c = priv;
|
|
sc = c->aue_sc;
|
|
AUE_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
printf("aue%d: usb error on tx: %s\n", sc->aue_unit,
|
|
usbd_errstr(status));
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_TX]);
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
ifp->if_timer = 0;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
usbd_get_xfer_status(c->aue_xfer, NULL, NULL, NULL, &err);
|
|
|
|
if (c->aue_mbuf != NULL) {
|
|
c->aue_mbuf->m_pkthdr.rcvif = ifp;
|
|
usb_tx_done(c->aue_mbuf);
|
|
c->aue_mbuf = NULL;
|
|
}
|
|
|
|
if (err)
|
|
ifp->if_oerrors++;
|
|
else
|
|
ifp->if_opackets++;
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
Static void aue_tick(xsc)
|
|
void *xsc;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct ifnet *ifp;
|
|
struct mii_data *mii;
|
|
|
|
sc = xsc;
|
|
|
|
if (sc == NULL)
|
|
return;
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
mii = device_get_softc(sc->aue_miibus);
|
|
if (mii == NULL) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
mii_tick(mii);
|
|
if (!sc->aue_link) {
|
|
mii_pollstat(mii);
|
|
if (mii->mii_media_status & IFM_ACTIVE &&
|
|
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)
|
|
sc->aue_link++;
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
aue_start(ifp);
|
|
}
|
|
|
|
sc->aue_stat_ch = timeout(aue_tick, sc, hz);
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
Static int aue_encap(sc, m, idx)
|
|
struct aue_softc *sc;
|
|
struct mbuf *m;
|
|
int idx;
|
|
{
|
|
int total_len;
|
|
struct aue_chain *c;
|
|
usbd_status err;
|
|
|
|
c = &sc->aue_cdata.aue_tx_chain[idx];
|
|
|
|
/*
|
|
* Copy the mbuf data into a contiguous buffer, leaving two
|
|
* bytes at the beginning to hold the frame length.
|
|
*/
|
|
m_copydata(m, 0, m->m_pkthdr.len, c->aue_buf + 2);
|
|
c->aue_mbuf = m;
|
|
|
|
total_len = m->m_pkthdr.len + 2;
|
|
|
|
/*
|
|
* The ADMtek documentation says that the packet length is
|
|
* supposed to be specified in the first two bytes of the
|
|
* transfer, however it actually seems to ignore this info
|
|
* and base the frame size on the bulk transfer length.
|
|
*/
|
|
c->aue_buf[0] = (u_int8_t)m->m_pkthdr.len;
|
|
c->aue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8);
|
|
|
|
usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_TX],
|
|
c, c->aue_buf, total_len, USBD_FORCE_SHORT_XFER,
|
|
10000, aue_txeof);
|
|
|
|
/* Transmit */
|
|
err = usbd_transfer(c->aue_xfer);
|
|
if (err != USBD_IN_PROGRESS) {
|
|
aue_stop(sc);
|
|
return(EIO);
|
|
}
|
|
|
|
sc->aue_cdata.aue_tx_cnt++;
|
|
|
|
return(0);
|
|
}
|
|
|
|
Static void aue_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
|
|
sc = ifp->if_softc;
|
|
AUE_LOCK(sc);
|
|
|
|
if (!sc->aue_link) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (ifp->if_flags & IFF_OACTIVE) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (aue_encap(sc, m_head, 0)) {
|
|
IF_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m_head);
|
|
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
AUE_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
Static void aue_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct aue_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
struct mii_data *mii;
|
|
struct aue_chain *c;
|
|
usbd_status err;
|
|
int i;
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
if (ifp->if_flags & IFF_RUNNING) {
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
aue_reset(sc);
|
|
|
|
mii = device_get_softc(sc->aue_miibus);
|
|
|
|
/* Set MAC address */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
csr_write_1(sc, AUE_PAR0 + i, sc->arpcom.ac_enaddr[i]);
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
} else {
|
|
AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
}
|
|
|
|
/* Init TX ring. */
|
|
if (aue_tx_list_init(sc) == ENOBUFS) {
|
|
printf("aue%d: tx list init failed\n", sc->aue_unit);
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Init RX ring. */
|
|
if (aue_rx_list_init(sc) == ENOBUFS) {
|
|
printf("aue%d: rx list init failed\n", sc->aue_unit);
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
#ifdef AUE_INTR_PIPE
|
|
sc->aue_cdata.aue_ibuf = malloc(AUE_INTR_PKTLEN, M_USBDEV, M_NOWAIT);
|
|
#endif
|
|
|
|
/* Load the multicast filter. */
|
|
aue_setmulti(sc);
|
|
|
|
/* Enable RX and TX */
|
|
csr_write_1(sc, AUE_CTL0, AUE_CTL0_RXSTAT_APPEND|AUE_CTL0_RX_ENB);
|
|
AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_TX_ENB);
|
|
AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_EP3_CLR);
|
|
mii_mediachg(mii);
|
|
|
|
/* Open RX and TX pipes. */
|
|
err = usbd_open_pipe(sc->aue_iface, sc->aue_ed[AUE_ENDPT_RX],
|
|
USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_RX]);
|
|
if (err) {
|
|
printf("aue%d: open rx pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
err = usbd_open_pipe(sc->aue_iface, sc->aue_ed[AUE_ENDPT_TX],
|
|
USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (err) {
|
|
printf("aue%d: open tx pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
#ifdef AUE_INTR_PIPE
|
|
err = usbd_open_pipe_intr(sc->aue_iface, sc->aue_ed[AUE_ENDPT_INTR],
|
|
USBD_SHORT_XFER_OK, &sc->aue_ep[AUE_ENDPT_INTR], sc,
|
|
sc->aue_cdata.aue_ibuf, AUE_INTR_PKTLEN, aue_intr,
|
|
AUE_INTR_INTERVAL);
|
|
if (err) {
|
|
printf("aue%d: open intr pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Start up the receive pipe. */
|
|
for (i = 0; i < AUE_RX_LIST_CNT; i++) {
|
|
c = &sc->aue_cdata.aue_rx_chain[i];
|
|
usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_RX],
|
|
c, mtod(c->aue_mbuf, char *), AUE_BUFSZ,
|
|
USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, aue_rxeof);
|
|
usbd_transfer(c->aue_xfer);
|
|
}
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
sc->aue_stat_ch = timeout(aue_tick, sc, hz);
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
Static int aue_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
mii = device_get_softc(sc->aue_miibus);
|
|
sc->aue_link = 0;
|
|
if (mii->mii_instance) {
|
|
struct mii_softc *miisc;
|
|
for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL;
|
|
miisc = LIST_NEXT(miisc, mii_list))
|
|
mii_phy_reset(miisc);
|
|
}
|
|
mii_mediachg(mii);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
Static void aue_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
mii = device_get_softc(sc->aue_miibus);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
|
|
return;
|
|
}
|
|
|
|
Static int aue_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct aue_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int error = 0;
|
|
|
|
AUE_LOCK(sc);
|
|
|
|
switch(command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_flags & IFF_RUNNING &&
|
|
ifp->if_flags & IFF_PROMISC &&
|
|
!(sc->aue_if_flags & IFF_PROMISC)) {
|
|
AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
} else if (ifp->if_flags & IFF_RUNNING &&
|
|
!(ifp->if_flags & IFF_PROMISC) &&
|
|
sc->aue_if_flags & IFF_PROMISC) {
|
|
AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
} else if (!(ifp->if_flags & IFF_RUNNING))
|
|
aue_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
aue_stop(sc);
|
|
}
|
|
sc->aue_if_flags = ifp->if_flags;
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
aue_setmulti(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->aue_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
AUE_UNLOCK(sc);
|
|
|
|
return(error);
|
|
}
|
|
|
|
Static void aue_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct aue_softc *sc;
|
|
struct aue_chain *c;
|
|
usbd_status stat;
|
|
|
|
sc = ifp->if_softc;
|
|
AUE_LOCK(sc);
|
|
|
|
ifp->if_oerrors++;
|
|
printf("aue%d: watchdog timeout\n", sc->aue_unit);
|
|
|
|
c = &sc->aue_cdata.aue_tx_chain[0];
|
|
usbd_get_xfer_status(c->aue_xfer, NULL, NULL, NULL, &stat);
|
|
aue_txeof(c->aue_xfer, c, stat);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
aue_start(ifp);
|
|
AUE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
Static void aue_stop(sc)
|
|
struct aue_softc *sc;
|
|
{
|
|
usbd_status err;
|
|
struct ifnet *ifp;
|
|
int i;
|
|
|
|
AUE_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
csr_write_1(sc, AUE_CTL0, 0);
|
|
csr_write_1(sc, AUE_CTL1, 0);
|
|
aue_reset(sc);
|
|
untimeout(aue_tick, sc, sc->aue_stat_ch);
|
|
|
|
/* Stop transfers. */
|
|
if (sc->aue_ep[AUE_ENDPT_RX] != NULL) {
|
|
err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_RX]);
|
|
if (err) {
|
|
printf("aue%d: abort rx pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
}
|
|
err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_RX]);
|
|
if (err) {
|
|
printf("aue%d: close rx pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
}
|
|
sc->aue_ep[AUE_ENDPT_RX] = NULL;
|
|
}
|
|
|
|
if (sc->aue_ep[AUE_ENDPT_TX] != NULL) {
|
|
err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (err) {
|
|
printf("aue%d: abort tx pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
}
|
|
err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (err) {
|
|
printf("aue%d: close tx pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
}
|
|
sc->aue_ep[AUE_ENDPT_TX] = NULL;
|
|
}
|
|
|
|
#ifdef AUE_INTR_PIPE
|
|
if (sc->aue_ep[AUE_ENDPT_INTR] != NULL) {
|
|
err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_INTR]);
|
|
if (err) {
|
|
printf("aue%d: abort intr pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
}
|
|
err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_INTR]);
|
|
if (err) {
|
|
printf("aue%d: close intr pipe failed: %s\n",
|
|
sc->aue_unit, usbd_errstr(err));
|
|
}
|
|
sc->aue_ep[AUE_ENDPT_INTR] = NULL;
|
|
}
|
|
#endif
|
|
|
|
/* Free RX resources. */
|
|
for (i = 0; i < AUE_RX_LIST_CNT; i++) {
|
|
if (sc->aue_cdata.aue_rx_chain[i].aue_buf != NULL) {
|
|
free(sc->aue_cdata.aue_rx_chain[i].aue_buf, M_USBDEV);
|
|
sc->aue_cdata.aue_rx_chain[i].aue_buf = NULL;
|
|
}
|
|
if (sc->aue_cdata.aue_rx_chain[i].aue_mbuf != NULL) {
|
|
m_freem(sc->aue_cdata.aue_rx_chain[i].aue_mbuf);
|
|
sc->aue_cdata.aue_rx_chain[i].aue_mbuf = NULL;
|
|
}
|
|
if (sc->aue_cdata.aue_rx_chain[i].aue_xfer != NULL) {
|
|
usbd_free_xfer(sc->aue_cdata.aue_rx_chain[i].aue_xfer);
|
|
sc->aue_cdata.aue_rx_chain[i].aue_xfer = NULL;
|
|
}
|
|
}
|
|
|
|
/* Free TX resources. */
|
|
for (i = 0; i < AUE_TX_LIST_CNT; i++) {
|
|
if (sc->aue_cdata.aue_tx_chain[i].aue_buf != NULL) {
|
|
free(sc->aue_cdata.aue_tx_chain[i].aue_buf, M_USBDEV);
|
|
sc->aue_cdata.aue_tx_chain[i].aue_buf = NULL;
|
|
}
|
|
if (sc->aue_cdata.aue_tx_chain[i].aue_mbuf != NULL) {
|
|
m_freem(sc->aue_cdata.aue_tx_chain[i].aue_mbuf);
|
|
sc->aue_cdata.aue_tx_chain[i].aue_mbuf = NULL;
|
|
}
|
|
if (sc->aue_cdata.aue_tx_chain[i].aue_xfer != NULL) {
|
|
usbd_free_xfer(sc->aue_cdata.aue_tx_chain[i].aue_xfer);
|
|
sc->aue_cdata.aue_tx_chain[i].aue_xfer = NULL;
|
|
}
|
|
}
|
|
|
|
#ifdef AUE_INTR_PIPE
|
|
free(sc->aue_cdata.aue_ibuf, M_USBDEV);
|
|
sc->aue_cdata.aue_ibuf = NULL;
|
|
#endif
|
|
|
|
sc->aue_link = 0;
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
AUE_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
Static void aue_shutdown(dev)
|
|
device_t dev;
|
|
{
|
|
struct aue_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->aue_gone++;
|
|
AUE_LOCK(sc);
|
|
aue_reset(sc);
|
|
aue_stop(sc);
|
|
AUE_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|