marius 768c79cd77 Several chipset drivers alter parameters relevant for the DMA tag creation, ... i.e. alignment, max_address, max_iosize and segsize (only max_address is thought to have an negative impact regarding this issue though), after calling ata_dmainit() either directly or indirectly so these values have no effect or at least no effect on the DMA tags and the defaults are used for the latter instead. So change the drivers to set these parameters up-front and ata_dmainit() to honor them. This file was missed in r216013. Submitted by: nwhitehorn		2010-11-30 20:54:14 +00:00
..
ata_dbdma.c	Several chipset drivers alter parameters relevant for the DMA tag creation,	2010-11-30 20:54:14 +00:00
ata_dbdma.h	Add DMA support for Apple built-in ATA controllers.	2008-09-27 15:13:44 +00:00
ata_kauai.c	ATAPI DMA does not seem to work completely reliably on Shasta controllers,	2010-09-11 22:09:16 +00:00
ata_macio.c	MFp4:	2009-12-06 00:10:13 +00:00
cpcht.c	Allow access to the HT I/O port space on the IBM CPC9X5 northbridge chips.	2010-10-30 23:09:56 +00:00
cuda.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
cudavar.h	Get nexus(4) out of the RTC business. The interface used by nexus(4)	2010-03-23 03:14:44 +00:00
dbdma.c	Clean up some magic numbers in the DBDMA code by replacing them with	2008-10-27 23:11:14 +00:00
dbdmavar.h	Clean up some magic numbers in the DBDMA code by replacing them with	2008-10-27 23:11:14 +00:00
fcu.c	Add three new drivers for fan control and temperature reading on the	2010-10-15 20:08:16 +00:00
grackle.c	Fix printf specifier to allow 32/64 bit builds.	2010-07-12 21:09:55 +00:00
gracklevar.h	Fix the OFW interrupt map parser to use its own idea of the number of interrupt	2009-01-03 19:38:47 +00:00
hrowpic.c	Move the EOI logic when starting ithreads into intr_machdep instead of	2010-07-06 15:27:05 +00:00
hrowpicvar.h
kiic.c	Increase register access delay to deal with the high-latency I2C	2010-09-15 19:08:41 +00:00
macgpio.c	Provide for multiple, cascaded PICs on PowerPC systems, and extend the	2010-06-18 14:06:27 +00:00
macgpiovar.h	Clean up the mac GPIO interface a little. Also remove bogus copyright	2008-12-08 03:00:45 +00:00
macio.c	Provide for multiple, cascaded PICs on PowerPC systems, and extend the	2010-06-18 14:06:27 +00:00
maciovar.h
openpic_macio.c	Remove the unneeded header <machine/intr.h>.	2010-07-02 02:17:39 +00:00
platform_powermac.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
pmu.c	Restructure how reset and poweroff are handled on PowerPC systems, since	2010-08-31 15:27:46 +00:00
pmuvar.h	Add the ability to control the sleep LED with led(4). Adding this fairly	2008-12-09 01:01:02 +00:00
pswitch.c
smu.c	Disabling CPU NAP modes during SMU commands is a hack needed only on U3	2010-11-10 20:09:05 +00:00
smusat.c	Add a driver for the CPU temperature sensors attached over I2C on the	2010-06-05 17:51:37 +00:00
uninorth.c	Change the default interrupt polarity on PowerPC systems from high to low.	2010-06-18 14:16:24 +00:00
uninorthpci.c	Provide for multiple, cascaded PICs on PowerPC systems, and extend the	2010-06-18 14:06:27 +00:00
uninorthvar.h	Add support for the U4 PCI-Express bridge chipset used in late-generation	2010-05-16 15:18:25 +00:00
vcoregpio.c	Introduce support for cpufreq on PowerPC with the dynamic frequency	2009-05-31 09:01:23 +00:00
viareg.h	Add ADB support. This provides support for the external ADB bus on the PowerMac	2008-10-26 19:37:38 +00:00