e722820434
Enhanced process coredump routines.
This brings in the following features:
1) Limit number of cores per process via the %I coredump formatter.
Example:
if corefilename is set to %N.%I.core AND num_cores = 3, then
if a process "rpd" cores, then the corefile will be named
"rpd.0.core", however if it cores again, then the kernel will
generate "rpd.1.core" until we hit the limit of "num_cores".
this is useful to get several corefiles, but also prevent filling
the machine with corefiles.
2) Encode machine hostname in core dump name via %H.
3) Compress coredumps, useful for embedded platforms with limited space.
A sysctl kern.compress_user_cores is made available if turned on.
To enable compressed coredumps, the following config options need to be set:
options COMPRESS_USER_CORES
device zlib # brings in the zlib requirements.
device gzio # brings in the kernel vnode gzip output module.
4) Eventhandlers are fired to indicate coredumps in progress.
5) The imgact sv_coredump routine has grown a flag to pass in more
state, currently this is used only for passing a flag down to compress
the coredump or not.
Note that the gzio facility can be used for generic output of gzip'd
streams via vnodes.
Obtained from: Juniper Networks
Reviewed by: kan
848 lines
21 KiB
Plaintext
848 lines
21 KiB
Plaintext
# $FreeBSD$
|
|
#
|
|
# On the handling of kernel options
|
|
#
|
|
# All kernel options should be listed in NOTES, with suitable
|
|
# descriptions. Negative options (options that make some code not
|
|
# compile) should be commented out; LINT (generated from NOTES) should
|
|
# compile as much code as possible. Try to structure option-using
|
|
# code so that a single option only switch code on, or only switch
|
|
# code off, to make it possible to have a full compile-test. If
|
|
# necessary, you can check for COMPILING_LINT to get maximum code
|
|
# coverage.
|
|
#
|
|
# All new options shall also be listed in either "conf/options" or
|
|
# "conf/options.<machine>". Options that affect a single source-file
|
|
# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
|
|
# that affect multiple files should either go in "opt_global.h" if
|
|
# this is a kernel-wide option (used just about everywhere), or in
|
|
# "opt_<option-name-in-lower-case>.h" if it affects only some files.
|
|
# Note that the effect of listing only an option without a
|
|
# header-file-name in conf/options (and cousins) is that the last
|
|
# convention is followed.
|
|
#
|
|
# This handling scheme is not yet fully implemented.
|
|
#
|
|
#
|
|
# Format of this file:
|
|
# Option name filename
|
|
#
|
|
# If filename is missing, the default is
|
|
# opt_<name-of-option-in-lower-case>.h
|
|
|
|
AAC_DEBUG opt_aac.h
|
|
AHC_ALLOW_MEMIO opt_aic7xxx.h
|
|
AHC_TMODE_ENABLE opt_aic7xxx.h
|
|
AHC_DUMP_EEPROM opt_aic7xxx.h
|
|
AHC_DEBUG opt_aic7xxx.h
|
|
AHC_DEBUG_OPTS opt_aic7xxx.h
|
|
AHC_REG_PRETTY_PRINT opt_aic7xxx.h
|
|
AHD_DEBUG opt_aic79xx.h
|
|
AHD_DEBUG_OPTS opt_aic79xx.h
|
|
AHD_TMODE_ENABLE opt_aic79xx.h
|
|
AHD_REG_PRETTY_PRINT opt_aic79xx.h
|
|
ADW_ALLOW_MEMIO opt_adw.h
|
|
|
|
TWA_DEBUG opt_twa.h
|
|
TWA_FLASH_FIRMWARE opt_twa.h
|
|
|
|
# Debugging options.
|
|
DDB
|
|
DDB_BUFR_SIZE opt_ddb.h
|
|
DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
|
|
DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
|
|
DDB_CTF opt_ddb.h
|
|
DDB_NUMSYM opt_ddb.h
|
|
GDB
|
|
KDB opt_global.h
|
|
KDB_TRACE opt_kdb.h
|
|
KDB_UNATTENDED opt_kdb.h
|
|
SYSCTL_DEBUG opt_sysctl.h
|
|
|
|
# Miscellaneous options.
|
|
ADAPTIVE_LOCKMGRS
|
|
ALQ
|
|
AUDIT opt_global.h
|
|
CODA_COMPAT_5 opt_coda.h
|
|
COMPAT_43 opt_compat.h
|
|
COMPAT_43TTY opt_compat.h
|
|
COMPAT_FREEBSD4 opt_compat.h
|
|
COMPAT_FREEBSD5 opt_compat.h
|
|
COMPAT_FREEBSD6 opt_compat.h
|
|
COMPAT_FREEBSD7 opt_compat.h
|
|
COMPILING_LINT opt_global.h
|
|
COMPRESS_USER_CORES opt_core.h
|
|
CY_PCI_FASTINTR
|
|
DEADLKRES opt_watchdog.h
|
|
DIRECTIO
|
|
FULL_PREEMPTION opt_sched.h
|
|
IPI_PREEMPTION opt_sched.h
|
|
GEOM_AES opt_geom.h
|
|
GEOM_BDE opt_geom.h
|
|
GEOM_BSD opt_geom.h
|
|
GEOM_CACHE opt_geom.h
|
|
GEOM_CONCAT opt_geom.h
|
|
GEOM_ELI opt_geom.h
|
|
GEOM_FOX opt_geom.h
|
|
GEOM_GATE opt_geom.h
|
|
GEOM_JOURNAL opt_geom.h
|
|
GEOM_LABEL opt_geom.h
|
|
GEOM_LINUX_LVM opt_geom.h
|
|
GEOM_MBR opt_geom.h
|
|
GEOM_MIRROR opt_geom.h
|
|
GEOM_MULTIPATH opt_geom.h
|
|
GEOM_NOP opt_geom.h
|
|
GEOM_PART_APM opt_geom.h
|
|
GEOM_PART_BSD opt_geom.h
|
|
GEOM_PART_EBR opt_geom.h
|
|
GEOM_PART_EBR_COMPAT opt_geom.h
|
|
GEOM_PART_GPT opt_geom.h
|
|
GEOM_PART_MBR opt_geom.h
|
|
GEOM_PART_PC98 opt_geom.h
|
|
GEOM_PART_VTOC8 opt_geom.h
|
|
GEOM_PC98 opt_geom.h
|
|
GEOM_RAID3 opt_geom.h
|
|
GEOM_SHSEC opt_geom.h
|
|
GEOM_STRIPE opt_geom.h
|
|
GEOM_SUNLABEL opt_geom.h
|
|
GEOM_UZIP opt_geom.h
|
|
GEOM_VIRSTOR opt_geom.h
|
|
GEOM_VOL opt_geom.h
|
|
GEOM_ZERO opt_geom.h
|
|
KDTRACE_HOOKS opt_kdtrace.h
|
|
KSTACK_MAX_PAGES
|
|
KSTACK_PAGES
|
|
KTRACE
|
|
KTRACE_REQUEST_POOL opt_ktrace.h
|
|
LIBICONV
|
|
MAC opt_global.h
|
|
MAC_BIBA opt_dontuse.h
|
|
MAC_BSDEXTENDED opt_dontuse.h
|
|
MAC_IFOFF opt_dontuse.h
|
|
MAC_LOMAC opt_dontuse.h
|
|
MAC_MLS opt_dontuse.h
|
|
MAC_NONE opt_dontuse.h
|
|
MAC_PARTITION opt_dontuse.h
|
|
MAC_PORTACL opt_dontuse.h
|
|
MAC_SEEOTHERUIDS opt_dontuse.h
|
|
MAC_STATIC opt_mac.h
|
|
MAC_STUB opt_dontuse.h
|
|
MAC_TEST opt_dontuse.h
|
|
MD_ROOT opt_md.h
|
|
MD_ROOT_SIZE opt_md.h
|
|
MFI_DEBUG opt_mfi.h
|
|
MFI_DECODE_LOG opt_mfi.h
|
|
MPROF_BUFFERS opt_mprof.h
|
|
MPROF_HASH_SIZE opt_mprof.h
|
|
NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
|
|
NO_ADAPTIVE_RWLOCKS
|
|
NO_ADAPTIVE_SX
|
|
NO_SYSCTL_DESCR opt_global.h
|
|
NSWBUF_MIN opt_swap.h
|
|
MBUF_PACKET_ZONE_DISABLE opt_global.h
|
|
PANIC_REBOOT_WAIT_TIME opt_panic.h
|
|
PPC_DEBUG opt_ppc.h
|
|
PPC_PROBE_CHIPSET opt_ppc.h
|
|
PPS_SYNC opt_ntp.h
|
|
PREEMPTION opt_sched.h
|
|
QUOTA
|
|
SCHED_4BSD opt_sched.h
|
|
SCHED_STATS opt_sched.h
|
|
SCHED_ULE opt_sched.h
|
|
SHOW_BUSYBUFS
|
|
SLEEPQUEUE_PROFILING
|
|
SLHCI_DEBUG opt_slhci.h
|
|
SPX_HACK
|
|
STACK opt_stack.h
|
|
SUIDDIR
|
|
MSGMNB opt_sysvipc.h
|
|
MSGMNI opt_sysvipc.h
|
|
MSGSEG opt_sysvipc.h
|
|
MSGSSZ opt_sysvipc.h
|
|
MSGTQL opt_sysvipc.h
|
|
SEMMAP opt_sysvipc.h
|
|
SEMMNI opt_sysvipc.h
|
|
SEMMNS opt_sysvipc.h
|
|
SEMMNU opt_sysvipc.h
|
|
SEMMSL opt_sysvipc.h
|
|
SEMOPM opt_sysvipc.h
|
|
SEMUME opt_sysvipc.h
|
|
SHMALL opt_sysvipc.h
|
|
SHMMAX opt_sysvipc.h
|
|
SHMMAXPGS opt_sysvipc.h
|
|
SHMMIN opt_sysvipc.h
|
|
SHMMNI opt_sysvipc.h
|
|
SHMSEG opt_sysvipc.h
|
|
SYSVMSG opt_sysvipc.h
|
|
SYSVSEM opt_sysvipc.h
|
|
SYSVSHM opt_sysvipc.h
|
|
SW_WATCHDOG opt_watchdog.h
|
|
TURNSTILE_PROFILING
|
|
VFS_AIO
|
|
VERBOSE_SYSINIT opt_global.h
|
|
WLCACHE opt_wavelan.h
|
|
WLDEBUG opt_wavelan.h
|
|
|
|
# POSIX kernel options
|
|
P1003_1B_MQUEUE opt_posix.h
|
|
P1003_1B_SEMAPHORES opt_posix.h
|
|
_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
|
|
|
|
# Do we want the config file compiled into the kernel?
|
|
INCLUDE_CONFIG_FILE opt_config.h
|
|
|
|
# Options for static filesystems. These should only be used at config
|
|
# time, since the corresponding lkms cannot work if there are any static
|
|
# dependencies. Unusability is enforced by hiding the defines for the
|
|
# options in a never-included header.
|
|
CD9660 opt_dontuse.h
|
|
CODA opt_dontuse.h
|
|
EXT2FS opt_dontuse.h
|
|
FDESCFS opt_dontuse.h
|
|
HPFS opt_dontuse.h
|
|
MSDOSFS opt_dontuse.h
|
|
NTFS opt_dontuse.h
|
|
NULLFS opt_dontuse.h
|
|
NWFS opt_dontuse.h
|
|
PORTALFS opt_dontuse.h
|
|
PROCFS opt_dontuse.h
|
|
PSEUDOFS opt_dontuse.h
|
|
REISERFS opt_dontuse.h
|
|
SMBFS opt_dontuse.h
|
|
TMPFS opt_dontuse.h
|
|
UDF opt_dontuse.h
|
|
UNIONFS opt_dontuse.h
|
|
|
|
# Pseudofs debugging
|
|
PSEUDOFS_TRACE opt_pseudofs.h
|
|
|
|
# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
|
|
FFS opt_ffs_broken_fixme.h
|
|
|
|
# In-kernel GSS-API
|
|
KGSSAPI opt_kgssapi.h
|
|
KGSSAPI_DEBUG opt_kgssapi.h
|
|
|
|
# These static filesystems have one slightly bogus static dependency in
|
|
# sys/i386/i386/autoconf.c. If any of these filesystems are
|
|
# statically compiled into the kernel, code for mounting them as root
|
|
# filesystems will be enabled - but look below.
|
|
NFSCLIENT opt_nfs.h
|
|
NFSSERVER opt_nfs.h
|
|
|
|
# Use these options to compile the experimental nfs client and/or
|
|
# server that supports NFSv4 into a kernel.
|
|
# NFSCL - client
|
|
# NFSD - server
|
|
NFSCL opt_nfs.h
|
|
NFSD opt_nfs.h
|
|
|
|
# filesystems and libiconv bridge
|
|
CD9660_ICONV opt_dontuse.h
|
|
MSDOSFS_ICONV opt_dontuse.h
|
|
NTFS_ICONV opt_dontuse.h
|
|
UDF_ICONV opt_dontuse.h
|
|
|
|
# If you are following the conditions in the copyright,
|
|
# you can enable soft-updates which will speed up a lot of thigs
|
|
# and make the system safer from crashes at the same time.
|
|
# otherwise a STUB module will be compiled in.
|
|
SOFTUPDATES opt_ffs.h
|
|
|
|
# On small, embedded systems, it can be useful to turn off support for
|
|
# snapshots. It saves about 30-40k for a feature that would be lightly
|
|
# used, if it is used at all.
|
|
NO_FFS_SNAPSHOT opt_ffs.h
|
|
|
|
# Enabling this option turns on support for Access Control Lists in UFS,
|
|
# which can be used to support high security configurations. Depends on
|
|
# UFS_EXTATTR.
|
|
UFS_ACL opt_ufs.h
|
|
|
|
# Enabling this option turns on support for extended attributes in UFS-based
|
|
# filesystems, which can be used to support high security configurations
|
|
# as well as new filesystem features.
|
|
UFS_EXTATTR opt_ufs.h
|
|
UFS_EXTATTR_AUTOSTART opt_ufs.h
|
|
|
|
# Enable fast hash lookups for large directories on UFS-based filesystems.
|
|
UFS_DIRHASH opt_ufs.h
|
|
|
|
# Enable gjournal-based UFS journal.
|
|
UFS_GJOURNAL opt_ufs.h
|
|
|
|
# The below sentence is not in English, and neither is this one.
|
|
# We plan to remove the static dependences above, with a
|
|
# <filesystem>_ROOT option to control if it usable as root. This list
|
|
# allows these options to be present in config files already (though
|
|
# they won't make any difference yet).
|
|
NFS_ROOT opt_nfsroot.h
|
|
|
|
# SMB/CIFS requester
|
|
NETSMB opt_netsmb.h
|
|
|
|
# Options used only in subr_param.c.
|
|
HZ opt_param.h
|
|
MAXFILES opt_param.h
|
|
NBUF opt_param.h
|
|
NSFBUFS opt_param.h
|
|
VM_BCACHE_SIZE_MAX opt_param.h
|
|
VM_SWZONE_SIZE_MAX opt_param.h
|
|
MAXUSERS
|
|
DFLDSIZ opt_param.h
|
|
MAXDSIZ opt_param.h
|
|
MAXSSIZ opt_param.h
|
|
|
|
# Generic SCSI options.
|
|
CAM_MAX_HIGHPOWER opt_cam.h
|
|
CAMDEBUG opt_cam.h
|
|
CAM_DEBUG_DELAY opt_cam.h
|
|
CAM_DEBUG_BUS opt_cam.h
|
|
CAM_DEBUG_TARGET opt_cam.h
|
|
CAM_DEBUG_LUN opt_cam.h
|
|
CAM_DEBUG_FLAGS opt_cam.h
|
|
SCSI_DELAY opt_scsi.h
|
|
SCSI_NO_SENSE_STRINGS opt_scsi.h
|
|
SCSI_NO_OP_STRINGS opt_scsi.h
|
|
|
|
# Options used only in cam/scsi/scsi_cd.c
|
|
CHANGER_MIN_BUSY_SECONDS opt_cd.h
|
|
CHANGER_MAX_BUSY_SECONDS opt_cd.h
|
|
|
|
# Options used only in cam/scsi/scsi_sa.c.
|
|
SA_IO_TIMEOUT opt_sa.h
|
|
SA_SPACE_TIMEOUT opt_sa.h
|
|
SA_REWIND_TIMEOUT opt_sa.h
|
|
SA_ERASE_TIMEOUT opt_sa.h
|
|
SA_1FM_AT_EOD opt_sa.h
|
|
|
|
# Options used only in cam/scsi/scsi_pt.c
|
|
SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
|
|
|
|
# Options used only in cam/scsi/scsi_ses.c
|
|
SES_ENABLE_PASSTHROUGH opt_ses.h
|
|
|
|
# Options used in dev/sym/ (Symbios SCSI driver).
|
|
SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
|
|
# Allows the ncr to take precedence
|
|
# 1 (1<<0) -> 810a, 860
|
|
# 2 (1<<1) -> 825a, 875, 885, 895
|
|
# 4 (1<<2) -> 895a, 896, 1510d
|
|
SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
|
|
# disabled:0 (default), enabled:1
|
|
SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
|
|
# disabled:0, enabled:1 (default)
|
|
SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
|
|
# default:8, range:[1..64]
|
|
|
|
# Options used only in pci/ncr.c
|
|
SCSI_NCR_DEBUG opt_ncr.h
|
|
SCSI_NCR_MAX_SYNC opt_ncr.h
|
|
SCSI_NCR_MAX_WIDE opt_ncr.h
|
|
SCSI_NCR_MYADDR opt_ncr.h
|
|
|
|
# Options used only in dev/isp/*
|
|
ISP_TARGET_MODE opt_isp.h
|
|
ISP_FW_CRASH_DUMP opt_isp.h
|
|
ISP_DEFAULT_ROLES opt_isp.h
|
|
|
|
# Options used only in dev/iscsi
|
|
ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
|
|
|
|
# Options used in the 'ata' ATA/ATAPI driver
|
|
ATA_STATIC_ID opt_ata.h
|
|
ATA_NOPCI opt_ata.h
|
|
ATA_REQUEST_TIMEOUT opt_ata.h
|
|
ATA_CAM opt_ata.h
|
|
|
|
# Net stuff.
|
|
ACCEPT_FILTER_DATA
|
|
ACCEPT_FILTER_DNS
|
|
ACCEPT_FILTER_HTTP
|
|
ALTQ opt_global.h
|
|
ALTQ_CBQ opt_altq.h
|
|
ALTQ_CDNR opt_altq.h
|
|
ALTQ_DEBUG opt_altq.h
|
|
ALTQ_HFSC opt_altq.h
|
|
ALTQ_NOPCC opt_altq.h
|
|
ALTQ_PRIQ opt_altq.h
|
|
ALTQ_RED opt_altq.h
|
|
ALTQ_RIO opt_altq.h
|
|
BOOTP opt_bootp.h
|
|
BOOTP_BLOCKSIZE opt_bootp.h
|
|
BOOTP_COMPAT opt_bootp.h
|
|
BOOTP_NFSROOT opt_bootp.h
|
|
BOOTP_NFSV3 opt_bootp.h
|
|
BOOTP_WIRED_TO opt_bootp.h
|
|
DEVICE_POLLING
|
|
DEV_ENC opt_enc.h
|
|
DEV_PF opt_pf.h
|
|
DEV_PFLOG opt_pf.h
|
|
DEV_PFSYNC opt_pf.h
|
|
DEV_VLAN opt_vlan.h
|
|
DUMMYNET opt_ipdn.h
|
|
ETHER_8022 opt_ef.h
|
|
ETHER_8023 opt_ef.h
|
|
ETHER_II opt_ef.h
|
|
ETHER_SNAP opt_ef.h
|
|
INET opt_inet.h
|
|
INET6 opt_inet6.h
|
|
IPDIVERT
|
|
IPFILTER opt_ipfilter.h
|
|
IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
|
|
IPFILTER_LOG opt_ipfilter.h
|
|
IPFILTER_LOOKUP opt_ipfilter.h
|
|
IPFIREWALL opt_ipfw.h
|
|
IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
|
|
IPFIREWALL_FORWARD opt_ipfw.h
|
|
IPFIREWALL_NAT opt_ipfw.h
|
|
IPFIREWALL_VERBOSE opt_ipfw.h
|
|
IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
|
|
IPSEC opt_ipsec.h
|
|
IPSEC_DEBUG opt_ipsec.h
|
|
IPSEC_FILTERTUNNEL opt_ipsec.h
|
|
IPSEC_NAT_T opt_ipsec.h
|
|
IPSTEALTH
|
|
IPX
|
|
KRPC
|
|
LIBALIAS
|
|
LIBMBPOOL
|
|
LIBMCHAIN
|
|
MBUF_PROFILING
|
|
MBUF_STRESS_TEST
|
|
MROUTING opt_mrouting.h
|
|
NCP
|
|
NETATALK opt_atalk.h
|
|
NFSLOCKD
|
|
RADIX_MPATH opt_mpath.h
|
|
ROUTETABLES opt_route.h
|
|
SLIP_IFF_OPTS opt_slip.h
|
|
TCPDEBUG
|
|
TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading
|
|
TCP_SIGNATURE opt_inet.h
|
|
TCP_SORECEIVE_STREAM opt_inet.h
|
|
VLAN_ARRAY opt_vlan.h
|
|
XBONEHACK
|
|
FLOWTABLE opt_route.h
|
|
|
|
#
|
|
# SCTP
|
|
#
|
|
SCTP opt_sctp.h
|
|
SCTP_DEBUG opt_sctp.h # Enable debug printfs
|
|
SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
|
|
SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
|
|
SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
|
|
SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
|
|
SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
|
|
SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
|
|
SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
|
|
#
|
|
#
|
|
#
|
|
|
|
# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
|
|
# Each netgraph node type can be either be compiled into the kernel
|
|
# or loaded dynamically. To get the former, include the corresponding
|
|
# option below. Each type has its own man page, e.g. ng_async(4).
|
|
NETGRAPH
|
|
NETGRAPH_DEBUG opt_netgraph.h
|
|
NETGRAPH_ASYNC opt_netgraph.h
|
|
NETGRAPH_ATMLLC opt_netgraph.h
|
|
NETGRAPH_ATM_ATMPIF opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
|
|
NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
|
|
NETGRAPH_BPF opt_netgraph.h
|
|
NETGRAPH_BRIDGE opt_netgraph.h
|
|
NETGRAPH_CAR opt_netgraph.h
|
|
NETGRAPH_CISCO opt_netgraph.h
|
|
NETGRAPH_DEFLATE opt_netgraph.h
|
|
NETGRAPH_DEVICE opt_netgraph.h
|
|
NETGRAPH_ECHO opt_netgraph.h
|
|
NETGRAPH_EIFACE opt_netgraph.h
|
|
NETGRAPH_ETHER opt_netgraph.h
|
|
NETGRAPH_ETHER_ECHO opt_netgraph.h
|
|
NETGRAPH_FEC opt_netgraph.h
|
|
NETGRAPH_FRAME_RELAY opt_netgraph.h
|
|
NETGRAPH_GIF opt_netgraph.h
|
|
NETGRAPH_GIF_DEMUX opt_netgraph.h
|
|
NETGRAPH_HOLE opt_netgraph.h
|
|
NETGRAPH_IFACE opt_netgraph.h
|
|
NETGRAPH_IP_INPUT opt_netgraph.h
|
|
NETGRAPH_IPFW opt_netgraph.h
|
|
NETGRAPH_KSOCKET opt_netgraph.h
|
|
NETGRAPH_L2TP opt_netgraph.h
|
|
NETGRAPH_LMI opt_netgraph.h
|
|
# MPPC compression requires proprietary files (not included)
|
|
NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
|
|
NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
|
|
NETGRAPH_NAT opt_netgraph.h
|
|
NETGRAPH_NETFLOW opt_netgraph.h
|
|
NETGRAPH_ONE2MANY opt_netgraph.h
|
|
NETGRAPH_PIPE opt_netgraph.h
|
|
NETGRAPH_PPP opt_netgraph.h
|
|
NETGRAPH_PPPOE opt_netgraph.h
|
|
NETGRAPH_PPTPGRE opt_netgraph.h
|
|
NETGRAPH_PRED1 opt_netgraph.h
|
|
NETGRAPH_RFC1490 opt_netgraph.h
|
|
NETGRAPH_SOCKET opt_netgraph.h
|
|
NETGRAPH_SPLIT opt_netgraph.h
|
|
NETGRAPH_SPPP opt_netgraph.h
|
|
NETGRAPH_TAG opt_netgraph.h
|
|
NETGRAPH_TCPMSS opt_netgraph.h
|
|
NETGRAPH_TEE opt_netgraph.h
|
|
NETGRAPH_TTY opt_netgraph.h
|
|
NETGRAPH_UI opt_netgraph.h
|
|
NETGRAPH_VJC opt_netgraph.h
|
|
NETGRAPH_VLAN opt_netgraph.h
|
|
|
|
# NgATM options
|
|
NGATM_ATM opt_netgraph.h
|
|
NGATM_ATMBASE opt_netgraph.h
|
|
NGATM_SSCOP opt_netgraph.h
|
|
NGATM_SSCFU opt_netgraph.h
|
|
NGATM_UNI opt_netgraph.h
|
|
NGATM_CCATM opt_netgraph.h
|
|
|
|
# DRM options
|
|
DRM_DEBUG opt_drm.h
|
|
|
|
ZERO_COPY_SOCKETS opt_zero.h
|
|
TI_PRIVATE_JUMBOS opt_ti.h
|
|
TI_JUMBO_HDRSPLIT opt_ti.h
|
|
BCE_JUMBO_HDRSPLIT opt_bce.h
|
|
|
|
# XXX Conflict: # of devices vs network protocol (Native ATM).
|
|
# This makes "atm.h" unusable.
|
|
NATM
|
|
|
|
# DPT driver debug flags
|
|
DPT_MEASURE_PERFORMANCE opt_dpt.h
|
|
DPT_HANDLE_TIMEOUTS opt_dpt.h
|
|
DPT_TIMEOUT_FACTOR opt_dpt.h
|
|
DPT_LOST_IRQ opt_dpt.h
|
|
DPT_RESET_HBA opt_dpt.h
|
|
|
|
# Misc debug flags. Most of these should probably be replaced with
|
|
# 'DEBUG', and then let people recompile just the interesting modules
|
|
# with 'make CC="cc -DDEBUG"'.
|
|
CLUSTERDEBUG opt_debug_cluster.h
|
|
DEBUG_1284 opt_ppb_1284.h
|
|
VP0_DEBUG opt_vpo.h
|
|
LPT_DEBUG opt_lpt.h
|
|
PLIP_DEBUG opt_plip.h
|
|
LOCKF_DEBUG opt_debug_lockf.h
|
|
NETATALKDEBUG opt_atalk.h
|
|
SI_DEBUG opt_debug_si.h
|
|
|
|
# Fb options
|
|
FB_DEBUG opt_fb.h
|
|
FB_INSTALL_CDEV opt_fb.h
|
|
|
|
# ppbus related options
|
|
PERIPH_1284 opt_ppb_1284.h
|
|
DONTPROBE_1284 opt_ppb_1284.h
|
|
|
|
# smbus related options
|
|
ENABLE_ALART opt_intpm.h
|
|
|
|
# These cause changes all over the kernel
|
|
BLKDEV_IOSIZE opt_global.h
|
|
BURN_BRIDGES opt_global.h
|
|
DEBUG opt_global.h
|
|
DEBUG_LOCKS opt_global.h
|
|
DEBUG_VFS_LOCKS opt_global.h
|
|
DFLTPHYS opt_global.h
|
|
DIAGNOSTIC opt_global.h
|
|
INVARIANT_SUPPORT opt_global.h
|
|
INVARIANTS opt_global.h
|
|
MAXPHYS opt_global.h
|
|
MCLSHIFT opt_global.h
|
|
MUTEX_DEBUG opt_global.h
|
|
MUTEX_NOINLINE opt_global.h
|
|
LOCK_PROFILING opt_global.h
|
|
LOCK_PROFILING_FAST opt_global.h
|
|
MSIZE opt_global.h
|
|
REGRESSION opt_global.h
|
|
RESTARTABLE_PANICS opt_global.h
|
|
RWLOCK_NOINLINE opt_global.h
|
|
SX_NOINLINE opt_global.h
|
|
VFS_BIO_DEBUG opt_global.h
|
|
|
|
# These are VM related options
|
|
VM_KMEM_SIZE opt_vm.h
|
|
VM_KMEM_SIZE_SCALE opt_vm.h
|
|
VM_KMEM_SIZE_MAX opt_vm.h
|
|
VM_NRESERVLEVEL opt_vm.h
|
|
VM_LEVEL_0_ORDER opt_vm.h
|
|
NO_SWAPPING opt_vm.h
|
|
MALLOC_MAKE_FAILURES opt_vm.h
|
|
MALLOC_PROFILE opt_vm.h
|
|
|
|
# The MemGuard replacement allocator used for tamper-after-free detection
|
|
DEBUG_MEMGUARD opt_vm.h
|
|
|
|
# The RedZone malloc(9) protection
|
|
DEBUG_REDZONE opt_vm.h
|
|
|
|
# Standard SMP options
|
|
SMP opt_global.h
|
|
|
|
# Size of the kernel message buffer
|
|
MSGBUF_SIZE opt_msgbuf.h
|
|
|
|
# NFS options
|
|
NFS_MINATTRTIMO opt_nfs.h
|
|
NFS_MAXATTRTIMO opt_nfs.h
|
|
NFS_MINDIRATTRTIMO opt_nfs.h
|
|
NFS_MAXDIRATTRTIMO opt_nfs.h
|
|
NFS_GATHERDELAY opt_nfs.h
|
|
NFS_WDELAYHASHSIZ opt_nfs.h
|
|
NFS_DEBUG opt_nfs.h
|
|
|
|
# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
|
|
OVERRIDE_CARD opt_bktr.h
|
|
OVERRIDE_TUNER opt_bktr.h
|
|
OVERRIDE_DBX opt_bktr.h
|
|
OVERRIDE_MSP opt_bktr.h
|
|
BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
|
|
BROOKTREE_ALLOC_PAGES opt_bktr.h
|
|
BKTR_OVERRIDE_CARD opt_bktr.h
|
|
BKTR_OVERRIDE_TUNER opt_bktr.h
|
|
BKTR_OVERRIDE_DBX opt_bktr.h
|
|
BKTR_OVERRIDE_MSP opt_bktr.h
|
|
BKTR_SYSTEM_DEFAULT opt_bktr.h
|
|
BKTR_ALLOC_PAGES opt_bktr.h
|
|
BKTR_USE_PLL opt_bktr.h
|
|
BKTR_GPIO_ACCESS opt_bktr.h
|
|
BKTR_NO_MSP_RESET opt_bktr.h
|
|
BKTR_430_FX_MODE opt_bktr.h
|
|
BKTR_SIS_VIA_MODE opt_bktr.h
|
|
BKTR_USE_FREEBSD_SMBUS opt_bktr.h
|
|
BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
|
|
|
|
BREAK_TO_DEBUGGER opt_comconsole.h
|
|
ALT_BREAK_TO_DEBUGGER opt_comconsole.h
|
|
|
|
# Options to support PPS
|
|
UART_PPS_ON_CTS opt_uart.h
|
|
|
|
# options for bus/device framework
|
|
BUS_DEBUG opt_bus.h
|
|
|
|
# options for USB support
|
|
USB_DEBUG opt_usb.h
|
|
USB_VERBOSE opt_usb.h
|
|
USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
|
|
U3G_DEBUG opt_u3g.h
|
|
UKBD_DFLT_KEYMAP opt_ukbd.h
|
|
UPLCOM_INTR_INTERVAL opt_uplcom.h
|
|
UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
|
|
UVSCOM_INTR_INTERVAL opt_uvscom.h
|
|
|
|
# Embedded system options
|
|
INIT_PATH
|
|
|
|
ROOTDEVNAME
|
|
|
|
FDC_DEBUG opt_fdc.h
|
|
PCFCLOCK_VERBOSE opt_pcfclock.h
|
|
PCFCLOCK_MAX_RETRIES opt_pcfclock.h
|
|
|
|
KTR opt_global.h
|
|
KTR_ALQ opt_ktr.h
|
|
KTR_MASK opt_ktr.h
|
|
KTR_CPUMASK opt_ktr.h
|
|
KTR_COMPILE opt_global.h
|
|
KTR_ENTRIES opt_global.h
|
|
KTR_VERBOSE opt_ktr.h
|
|
WITNESS opt_global.h
|
|
WITNESS_KDB opt_witness.h
|
|
WITNESS_SKIPSPIN opt_witness.h
|
|
|
|
# options for ACPI support
|
|
ACPI_DEBUG opt_acpi.h
|
|
ACPI_MAX_TASKS opt_acpi.h
|
|
ACPI_MAX_THREADS opt_acpi.h
|
|
|
|
# ISA support
|
|
DEV_ISA opt_isa.h
|
|
ISAPNP opt_isa.h
|
|
|
|
# various 'device presence' options.
|
|
DEV_BPF opt_bpf.h
|
|
DEV_MCA opt_mca.h
|
|
DEV_CARP opt_carp.h
|
|
DEV_SPLASH opt_splash.h
|
|
|
|
# EISA support
|
|
DEV_EISA opt_eisa.h
|
|
EISA_SLOTS opt_eisa.h
|
|
|
|
# ed driver
|
|
ED_HPP opt_ed.h
|
|
ED_3C503 opt_ed.h
|
|
ED_SIC opt_ed.h
|
|
|
|
# bce driver
|
|
BCE_DEBUG opt_bce.h
|
|
|
|
SOCKBUF_DEBUG opt_global.h
|
|
|
|
# options for ubsec driver
|
|
UBSEC_DEBUG opt_ubsec.h
|
|
UBSEC_RNDTEST opt_ubsec.h
|
|
UBSEC_NO_RNG opt_ubsec.h
|
|
|
|
# options for hifn driver
|
|
HIFN_DEBUG opt_hifn.h
|
|
HIFN_RNDTEST opt_hifn.h
|
|
|
|
# options for safenet driver
|
|
SAFE_DEBUG opt_safe.h
|
|
SAFE_NO_RNG opt_safe.h
|
|
SAFE_RNDTEST opt_safe.h
|
|
|
|
# syscons options
|
|
MAXCONS opt_syscons.h
|
|
SC_ALT_MOUSE_IMAGE opt_syscons.h
|
|
SC_CUT_SPACES2TABS opt_syscons.h
|
|
SC_CUT_SEPCHARS opt_syscons.h
|
|
SC_DEBUG_LEVEL opt_syscons.h
|
|
SC_DFLT_FONT opt_syscons.h
|
|
SC_DISABLE_KDBKEY opt_syscons.h
|
|
SC_DISABLE_REBOOT opt_syscons.h
|
|
SC_HISTORY_SIZE opt_syscons.h
|
|
SC_KERNEL_CONS_ATTR opt_syscons.h
|
|
SC_KERNEL_CONS_REV_ATTR opt_syscons.h
|
|
SC_MOUSE_CHAR opt_syscons.h
|
|
SC_NO_CUTPASTE opt_syscons.h
|
|
SC_NO_FONT_LOADING opt_syscons.h
|
|
SC_NO_HISTORY opt_syscons.h
|
|
SC_NO_MODE_CHANGE opt_syscons.h
|
|
SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
|
|
SC_NO_SYSMOUSE opt_syscons.h
|
|
SC_NORM_ATTR opt_syscons.h
|
|
SC_NORM_REV_ATTR opt_syscons.h
|
|
SC_PIXEL_MODE opt_syscons.h
|
|
SC_RENDER_DEBUG opt_syscons.h
|
|
SC_TWOBUTTON_MOUSE opt_syscons.h
|
|
|
|
# teken terminal emulator options
|
|
TEKEN_CONS25 opt_teken.h
|
|
TEKEN_UTF8 opt_teken.h
|
|
|
|
# options for printf
|
|
PRINTF_BUFR_SIZE opt_printf.h
|
|
|
|
# kbd options
|
|
KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
|
|
KBD_INSTALL_CDEV opt_kbd.h
|
|
KBD_MAXRETRY opt_kbd.h
|
|
KBD_MAXWAIT opt_kbd.h
|
|
KBD_RESETDELAY opt_kbd.h
|
|
KBDIO_DEBUG opt_kbd.h
|
|
|
|
# options for the Atheros driver
|
|
ATH_DEBUG opt_ath.h
|
|
ATH_TXBUF opt_ath.h
|
|
ATH_RXBUF opt_ath.h
|
|
ATH_DIAGAPI opt_ath.h
|
|
ATH_TX99_DIAG opt_ath.h
|
|
|
|
# options for the Atheros hal
|
|
AH_SUPPORT_AR5416 opt_ah.h
|
|
|
|
AH_DEBUG opt_ah.h
|
|
AH_ASSERT opt_ah.h
|
|
AH_DEBUG_ALQ opt_ah.h
|
|
AH_REGOPS_FUNC opt_ah.h
|
|
AH_WRITE_REGDOMAIN opt_ah.h
|
|
AH_DEBUG_COUNTRY opt_ah.h
|
|
AH_WRITE_EEPROM opt_ah.h
|
|
AH_PRIVATE_DIAG opt_ah.h
|
|
AH_NEED_DESC_SWAP opt_ah.h
|
|
AH_USE_INIPDGAIN opt_ah.h
|
|
AH_MAXCHAN opt_ah.h
|
|
|
|
# options for the Broadcom BCM43xx driver (bwi)
|
|
BWI_DEBUG opt_bwi.h
|
|
BWI_DEBUG_VERBOSE opt_bwi.h
|
|
|
|
# options for the Marvell 8335 wireless driver
|
|
MALO_DEBUG opt_malo.h
|
|
MALO_TXBUF opt_malo.h
|
|
MALO_RXBUF opt_malo.h
|
|
|
|
# options for the Marvell wireless driver
|
|
MWL_DEBUG opt_mwl.h
|
|
MWL_TXBUF opt_mwl.h
|
|
MWL_RXBUF opt_mwl.h
|
|
MWL_DIAGAPI opt_mwl.h
|
|
MWL_AGGR_SIZE opt_mwl.h
|
|
MWL_TX_NODROP opt_mwl.h
|
|
|
|
# dcons options
|
|
DCONS_BUF_SIZE opt_dcons.h
|
|
DCONS_POLL_HZ opt_dcons.h
|
|
DCONS_FORCE_CONSOLE opt_dcons.h
|
|
DCONS_FORCE_GDB opt_dcons.h
|
|
|
|
# HWPMC options
|
|
HWPMC_HOOKS
|
|
|
|
# XBOX options for FreeBSD/i386, but some files are MI
|
|
XBOX opt_xbox.h
|
|
|
|
# XFS
|
|
XFS
|
|
|
|
# Interrupt filtering
|
|
INTR_FILTER
|
|
|
|
# 802.11 support layer
|
|
IEEE80211_DEBUG opt_wlan.h
|
|
IEEE80211_DEBUG_REFCNT opt_wlan.h
|
|
IEEE80211_AMPDU_AGE opt_wlan.h
|
|
IEEE80211_SUPPORT_MESH opt_wlan.h
|
|
IEEE80211_SUPPORT_SUPERG opt_wlan.h
|
|
IEEE80211_SUPPORT_TDMA opt_wlan.h
|
|
|
|
# 802.11 TDMA support
|
|
TDMA_SLOTLEN_DEFAULT opt_tdma.h
|
|
TDMA_SLOTCNT_DEFAULT opt_tdma.h
|
|
TDMA_BINTVAL_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_11B_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_11G_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_11A_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
|
|
TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
|
|
|
|
# Network stack virtualization options
|
|
VIMAGE opt_global.h
|
|
VNET_DEBUG opt_global.h
|
|
|
|
# Common Flash Interface (CFI) options
|
|
CFI_SUPPORT_STRATAFLASH opt_cfi.h
|
|
CFI_ARMEDANDDANGEROUS opt_cfi.h
|
|
|
|
# Sound options
|
|
SND_DEBUG opt_snd.h
|
|
SND_DIAGNOSTIC opt_snd.h
|
|
SND_FEEDER_MULTIFORMAT opt_snd.h
|
|
SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
|
|
SND_FEEDER_RATE_HP opt_snd.h
|
|
SND_PCM_64 opt_snd.h
|
|
SND_OLDSTEREO opt_snd.h
|
|
|
|
X86BIOS
|