freebsd-skq/sys/dev/ena/ena.h
Marcin Wojtas 7926bc4492 Add trigger reset function in the ENA driver
As the reset triggering is no longer a simple macro that was just
setting appropriate flag, the new function for triggering reset was
added. It improves code readability a lot, as we are avoiding additional
indentation.

Submitted by:  Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Amazon, Inc.
2020-05-26 15:37:55 +00:00

514 lines
12 KiB
C

/*-
* BSD LICENSE
*
* Copyright (c) 2015-2019 Amazon.com, Inc. or its affiliates.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#ifndef ENA_H
#define ENA_H
#include <sys/types.h>
#include "ena-com/ena_com.h"
#include "ena-com/ena_eth_com.h"
#define DRV_MODULE_VER_MAJOR 2
#define DRV_MODULE_VER_MINOR 1
#define DRV_MODULE_VER_SUBMINOR 2
#define DRV_MODULE_NAME "ena"
#ifndef DRV_MODULE_VERSION
#define DRV_MODULE_VERSION \
__XSTRING(DRV_MODULE_VER_MAJOR) "." \
__XSTRING(DRV_MODULE_VER_MINOR) "." \
__XSTRING(DRV_MODULE_VER_SUBMINOR)
#endif
#define DEVICE_NAME "Elastic Network Adapter (ENA)"
#define DEVICE_DESC "ENA adapter"
/* Calculate DMA mask - width for ena cannot exceed 48, so it is safe */
#define ENA_DMA_BIT_MASK(x) ((1ULL << (x)) - 1ULL)
/* 1 for AENQ + ADMIN */
#define ENA_ADMIN_MSIX_VEC 1
#define ENA_MAX_MSIX_VEC(io_queues) (ENA_ADMIN_MSIX_VEC + (io_queues))
#define ENA_REG_BAR 0
#define ENA_MEM_BAR 2
#define ENA_BUS_DMA_SEGS 32
#define ENA_DEFAULT_BUF_RING_SIZE 4096
#define ENA_DEFAULT_RING_SIZE 1024
/*
* Refill Rx queue when number of required descriptors is above
* QUEUE_SIZE / ENA_RX_REFILL_THRESH_DIVIDER or ENA_RX_REFILL_THRESH_PACKET
*/
#define ENA_RX_REFILL_THRESH_DIVIDER 8
#define ENA_RX_REFILL_THRESH_PACKET 256
#define ENA_IRQNAME_SIZE 40
#define ENA_PKT_MAX_BUFS 19
#define ENA_RX_RSS_TABLE_LOG_SIZE 7
#define ENA_RX_RSS_TABLE_SIZE (1 << ENA_RX_RSS_TABLE_LOG_SIZE)
#define ENA_HASH_KEY_SIZE 40
#define ENA_MAX_FRAME_LEN 10000
#define ENA_MIN_FRAME_LEN 60
#define ENA_TX_RESUME_THRESH (ENA_PKT_MAX_BUFS + 2)
#define DB_THRESHOLD 64
#define TX_COMMIT 32
/*
* TX budget for cleaning. It should be half of the RX budget to reduce amount
* of TCP retransmissions.
*/
#define TX_BUDGET 128
/* RX cleanup budget. -1 stands for infinity. */
#define RX_BUDGET 256
/*
* How many times we can repeat cleanup in the io irq handling routine if the
* RX or TX budget was depleted.
*/
#define CLEAN_BUDGET 8
#define RX_IRQ_INTERVAL 20
#define TX_IRQ_INTERVAL 50
#define ENA_MIN_MTU 128
#define ENA_TSO_MAXSIZE 65536
#define ENA_MMIO_DISABLE_REG_READ BIT(0)
#define ENA_TX_RING_IDX_NEXT(idx, ring_size) (((idx) + 1) & ((ring_size) - 1))
#define ENA_RX_RING_IDX_NEXT(idx, ring_size) (((idx) + 1) & ((ring_size) - 1))
#define ENA_IO_TXQ_IDX(q) (2 * (q))
#define ENA_IO_RXQ_IDX(q) (2 * (q) + 1)
#define ENA_MGMNT_IRQ_IDX 0
#define ENA_IO_IRQ_FIRST_IDX 1
#define ENA_IO_IRQ_IDX(q) (ENA_IO_IRQ_FIRST_IDX + (q))
#define ENA_MAX_NO_INTERRUPT_ITERATIONS 3
/*
* ENA device should send keep alive msg every 1 sec.
* We wait for 6 sec just to be on the safe side.
*/
#define DEFAULT_KEEP_ALIVE_TO (SBT_1S * 6)
/* Time in jiffies before concluding the transmitter is hung. */
#define DEFAULT_TX_CMP_TO (SBT_1S * 5)
/* Number of queues to check for missing queues per timer tick */
#define DEFAULT_TX_MONITORED_QUEUES (4)
/* Max number of timeouted packets before device reset */
#define DEFAULT_TX_CMP_THRESHOLD (128)
/*
* Supported PCI vendor and devices IDs
*/
#define PCI_VENDOR_ID_AMAZON 0x1d0f
#define PCI_DEV_ID_ENA_PF 0x0ec2
#define PCI_DEV_ID_ENA_LLQ_PF 0x1ec2
#define PCI_DEV_ID_ENA_VF 0xec20
#define PCI_DEV_ID_ENA_LLQ_VF 0xec21
/*
* Flags indicating current ENA driver state
*/
enum ena_flags_t {
ENA_FLAG_DEVICE_RUNNING,
ENA_FLAG_DEV_UP,
ENA_FLAG_LINK_UP,
ENA_FLAG_MSIX_ENABLED,
ENA_FLAG_TRIGGER_RESET,
ENA_FLAG_ONGOING_RESET,
ENA_FLAG_DEV_UP_BEFORE_RESET,
ENA_FLAG_RSS_ACTIVE,
ENA_FLAGS_NUMBER = ENA_FLAG_RSS_ACTIVE
};
BITSET_DEFINE(_ena_state, ENA_FLAGS_NUMBER);
typedef struct _ena_state ena_state_t;
#define ENA_FLAG_ZERO(adapter) \
BIT_ZERO(ENA_FLAGS_NUMBER, &(adapter)->flags)
#define ENA_FLAG_ISSET(bit, adapter) \
BIT_ISSET(ENA_FLAGS_NUMBER, (bit), &(adapter)->flags)
#define ENA_FLAG_SET_ATOMIC(bit, adapter) \
BIT_SET_ATOMIC(ENA_FLAGS_NUMBER, (bit), &(adapter)->flags)
#define ENA_FLAG_CLEAR_ATOMIC(bit, adapter) \
BIT_CLR_ATOMIC(ENA_FLAGS_NUMBER, (bit), &(adapter)->flags)
struct msix_entry {
int entry;
int vector;
};
typedef struct _ena_vendor_info_t {
uint16_t vendor_id;
uint16_t device_id;
unsigned int index;
} ena_vendor_info_t;
struct ena_irq {
/* Interrupt resources */
struct resource *res;
driver_filter_t *handler;
void *data;
void *cookie;
unsigned int vector;
bool requested;
int cpu;
char name[ENA_IRQNAME_SIZE];
};
struct ena_que {
struct ena_adapter *adapter;
struct ena_ring *tx_ring;
struct ena_ring *rx_ring;
struct task cleanup_task;
struct taskqueue *cleanup_tq;
uint32_t id;
int cpu;
};
struct ena_calc_queue_size_ctx {
struct ena_com_dev_get_features_ctx *get_feat_ctx;
struct ena_com_dev *ena_dev;
device_t pdev;
uint16_t rx_queue_size;
uint16_t tx_queue_size;
uint16_t max_tx_sgl_size;
uint16_t max_rx_sgl_size;
};
#ifdef DEV_NETMAP
struct ena_netmap_tx_info {
uint32_t socket_buf_idx[ENA_PKT_MAX_BUFS];
bus_dmamap_t map_seg[ENA_PKT_MAX_BUFS];
unsigned int sockets_used;
};
#endif
struct ena_tx_buffer {
struct mbuf *mbuf;
/* # of ena desc for this specific mbuf
* (includes data desc and metadata desc) */
unsigned int tx_descs;
/* # of buffers used by this mbuf */
unsigned int num_of_bufs;
bus_dmamap_t dmamap;
/* Used to detect missing tx packets */
struct bintime timestamp;
bool print_once;
#ifdef DEV_NETMAP
struct ena_netmap_tx_info nm_info;
#endif /* DEV_NETMAP */
struct ena_com_buf bufs[ENA_PKT_MAX_BUFS];
} __aligned(CACHE_LINE_SIZE);
struct ena_rx_buffer {
struct mbuf *mbuf;
bus_dmamap_t map;
struct ena_com_buf ena_buf;
#ifdef DEV_NETMAP
uint32_t netmap_buf_idx;
#endif /* DEV_NETMAP */
} __aligned(CACHE_LINE_SIZE);
struct ena_stats_tx {
counter_u64_t cnt;
counter_u64_t bytes;
counter_u64_t prepare_ctx_err;
counter_u64_t dma_mapping_err;
counter_u64_t doorbells;
counter_u64_t missing_tx_comp;
counter_u64_t bad_req_id;
counter_u64_t collapse;
counter_u64_t collapse_err;
counter_u64_t queue_wakeup;
counter_u64_t queue_stop;
counter_u64_t llq_buffer_copy;
};
struct ena_stats_rx {
counter_u64_t cnt;
counter_u64_t bytes;
counter_u64_t refil_partial;
counter_u64_t bad_csum;
counter_u64_t mjum_alloc_fail;
counter_u64_t mbuf_alloc_fail;
counter_u64_t dma_mapping_err;
counter_u64_t bad_desc_num;
counter_u64_t bad_req_id;
counter_u64_t empty_rx_ring;
};
struct ena_ring {
/* Holds the empty requests for TX/RX out of order completions */
union {
uint16_t *free_tx_ids;
uint16_t *free_rx_ids;
};
struct ena_com_dev *ena_dev;
struct ena_adapter *adapter;
struct ena_com_io_cq *ena_com_io_cq;
struct ena_com_io_sq *ena_com_io_sq;
uint16_t qid;
/* Determines if device will use LLQ or normal mode for TX */
enum ena_admin_placement_policy_type tx_mem_queue_type;
union {
/* The maximum length the driver can push to the device (For LLQ) */
uint8_t tx_max_header_size;
/* The maximum (and default) mbuf size for the Rx descriptor. */
uint16_t rx_mbuf_sz;
};
bool first_interrupt;
uint16_t no_interrupt_event_cnt;
struct ena_com_rx_buf_info ena_bufs[ENA_PKT_MAX_BUFS];
struct ena_que *que;
struct lro_ctrl lro;
uint16_t next_to_use;
uint16_t next_to_clean;
union {
struct ena_tx_buffer *tx_buffer_info; /* contex of tx packet */
struct ena_rx_buffer *rx_buffer_info; /* contex of rx packet */
};
int ring_size; /* number of tx/rx_buffer_info's entries */
struct buf_ring *br; /* only for TX */
uint32_t buf_ring_size;
struct mtx ring_mtx;
char mtx_name[16];
struct {
struct task enqueue_task;
struct taskqueue *enqueue_tq;
};
union {
struct ena_stats_tx tx_stats;
struct ena_stats_rx rx_stats;
};
union {
int empty_rx_queue;
/* For Tx ring to indicate if it's running or not */
bool running;
};
/* How many packets are sent in one Tx loop, used for doorbells */
uint32_t acum_pkts;
/* Used for LLQ */
uint8_t *push_buf_intermediate_buf;
#ifdef DEV_NETMAP
bool initialized;
#endif /* DEV_NETMAP */
} __aligned(CACHE_LINE_SIZE);
struct ena_stats_dev {
counter_u64_t wd_expired;
counter_u64_t interface_up;
counter_u64_t interface_down;
counter_u64_t admin_q_pause;
};
struct ena_hw_stats {
counter_u64_t rx_packets;
counter_u64_t tx_packets;
counter_u64_t rx_bytes;
counter_u64_t tx_bytes;
counter_u64_t rx_drops;
counter_u64_t tx_drops;
};
/* Board specific private data structure */
struct ena_adapter {
struct ena_com_dev *ena_dev;
/* OS defined structs */
if_t ifp;
device_t pdev;
struct ifmedia media;
/* OS resources */
struct resource *memory;
struct resource *registers;
struct mtx global_mtx;
struct sx ioctl_sx;
/* MSI-X */
struct msix_entry *msix_entries;
int msix_vecs;
/* DMA tags used throughout the driver adapter for Tx and Rx */
bus_dma_tag_t tx_buf_tag;
bus_dma_tag_t rx_buf_tag;
int dma_width;
uint32_t max_mtu;
uint16_t max_tx_sgl_size;
uint16_t max_rx_sgl_size;
uint32_t tx_offload_cap;
/* Tx fast path data */
int num_queues;
unsigned int tx_ring_size;
unsigned int rx_ring_size;
uint16_t buf_ring_size;
/* RSS*/
uint8_t rss_ind_tbl[ENA_RX_RSS_TABLE_SIZE];
uint8_t mac_addr[ETHER_ADDR_LEN];
/* mdio and phy*/
ena_state_t flags;
/* Queue will represent one TX and one RX ring */
struct ena_que que[ENA_MAX_NUM_IO_QUEUES]
__aligned(CACHE_LINE_SIZE);
/* TX */
struct ena_ring tx_ring[ENA_MAX_NUM_IO_QUEUES]
__aligned(CACHE_LINE_SIZE);
/* RX */
struct ena_ring rx_ring[ENA_MAX_NUM_IO_QUEUES]
__aligned(CACHE_LINE_SIZE);
struct ena_irq irq_tbl[ENA_MAX_MSIX_VEC(ENA_MAX_NUM_IO_QUEUES)];
/* Timer service */
struct callout timer_service;
sbintime_t keep_alive_timestamp;
uint32_t next_monitored_tx_qid;
struct task reset_task;
struct taskqueue *reset_tq;
int wd_active;
sbintime_t keep_alive_timeout;
sbintime_t missing_tx_timeout;
uint32_t missing_tx_max_queues;
uint32_t missing_tx_threshold;
/* Statistics */
struct ena_stats_dev dev_stats;
struct ena_hw_stats hw_stats;
enum ena_regs_reset_reason_types reset_reason;
};
#define ENA_RING_MTX_LOCK(_ring) mtx_lock(&(_ring)->ring_mtx)
#define ENA_RING_MTX_TRYLOCK(_ring) mtx_trylock(&(_ring)->ring_mtx)
#define ENA_RING_MTX_UNLOCK(_ring) mtx_unlock(&(_ring)->ring_mtx)
static inline int ena_mbuf_count(struct mbuf *mbuf)
{
int count = 1;
while ((mbuf = mbuf->m_next) != NULL)
++count;
return count;
}
int ena_up(struct ena_adapter *);
void ena_down(struct ena_adapter *);
int ena_restore_device(struct ena_adapter *);
void ena_destroy_device(struct ena_adapter *, bool);
int ena_refill_rx_bufs(struct ena_ring *, uint32_t);
static inline void
ena_trigger_reset(struct ena_adapter *adapter,
enum ena_regs_reset_reason_types reset_reason)
{
if (likely(!ENA_FLAG_ISSET(ENA_FLAG_TRIGGER_RESET, adapter))) {
adapter->reset_reason = reset_reason;
ENA_FLAG_SET_ATOMIC(ENA_FLAG_TRIGGER_RESET, adapter);
}
}
static inline int
validate_rx_req_id(struct ena_ring *rx_ring, uint16_t req_id)
{
if (likely(req_id < rx_ring->ring_size))
return (0);
device_printf(rx_ring->adapter->pdev, "Invalid rx req_id: %hu\n",
req_id);
counter_u64_add(rx_ring->rx_stats.bad_req_id, 1);
/* Trigger device reset */
ena_trigger_reset(rx_ring->adapter, ENA_REGS_RESET_INV_RX_REQ_ID);
return (EFAULT);
}
#endif /* !(ENA_H) */