freebsd-skq/usr.sbin/pciconf/err.c
jhb c0cab82568 Add a new -e flag to pciconf(8)'s list mode to display PCI error details.
Currently this dumps the status of any error bits in the PCI status register
and PCI-express device status register.  It also lists any errors indicated
by version 1 of PCI-express Advanced Error Reporting (AER).

MFC after:	1 week
2012-06-01 18:33:40 +00:00

168 lines
5.6 KiB
C

/*-
* Copyright (c) 2012 Advanced Computing Technologies LLC
* Written by: John H. Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
static const char rcsid[] =
"$FreeBSD$";
#endif /* not lint */
#include <sys/param.h>
#include <sys/pciio.h>
#include <err.h>
#include <stdio.h>
#include <dev/pci/pcireg.h>
#include "pciconf.h"
struct bit_table {
uint32_t mask;
const char *desc;
};
/* Error indicators in the PCI status register (PCIR_STATUS). */
static struct bit_table pci_status[] = {
{ PCIM_STATUS_MDPERR, "Master Data Parity Error" },
{ PCIM_STATUS_STABORT, "Sent Target-Abort" },
{ PCIM_STATUS_RTABORT, "Received Target-Abort" },
{ PCIM_STATUS_RMABORT, "Received Master-Abort" },
{ PCIM_STATUS_SERR, "Signalled System Error" },
{ PCIM_STATUS_PERR, "Detected Parity Error" },
{ 0, NULL },
};
/* Valid error indicator bits in PCIR_STATUS. */
#define PCI_ERRORS (PCIM_STATUS_MDPERR | PCIM_STATUS_STABORT | \
PCIM_STATUS_RTABORT | PCIM_STATUS_RMABORT | \
PCIM_STATUS_SERR | PCIM_STATUS_PERR)
/* Error indicators in the PCI-Express device status register. */
static struct bit_table pcie_device_status[] = {
{ PCIM_EXP_STA_CORRECTABLE_ERROR, "Correctable Error Detected" },
{ PCIM_EXP_STA_NON_FATAL_ERROR, "Non-Fatal Error Detected" },
{ PCIM_EXP_STA_FATAL_ERROR, "Fatal Error Detected" },
{ PCIM_EXP_STA_UNSUPPORTED_REQ, "Unsupported Request Detected" },
{ 0, NULL },
};
/* Valid error indicator bits in the PCI-Express device status register. */
#define PCIE_ERRORS (PCIM_EXP_STA_CORRECTABLE_ERROR | \
PCIM_EXP_STA_NON_FATAL_ERROR | \
PCIM_EXP_STA_FATAL_ERROR | \
PCIM_EXP_STA_UNSUPPORTED_REQ)
/* AER Uncorrected errors. */
static struct bit_table aer_uc[] = {
{ PCIM_AER_UC_TRAINING_ERROR, "Link Training Error" },
{ PCIM_AER_UC_DL_PROTOCOL_ERROR, "Data Link Protocol Error" },
{ PCIM_AER_UC_SURPRISE_LINK_DOWN, "Surprise Link Down Error" },
{ PCIM_AER_UC_POISONED_TLP, "Poisoned TLP" },
{ PCIM_AER_UC_FC_PROTOCOL_ERROR, "Flow Control Protocol Error" },
{ PCIM_AER_UC_COMPLETION_TIMEOUT, "Completion Timeout" },
{ PCIM_AER_UC_COMPLETER_ABORT, "Completer Abort" },
{ PCIM_AER_UC_UNEXPECTED_COMPLETION, "Unexpected Completion" },
{ PCIM_AER_UC_RECEIVER_OVERFLOW, "Receiver Overflow Error" },
{ PCIM_AER_UC_MALFORMED_TLP, "Malformed TLP" },
{ PCIM_AER_UC_ECRC_ERROR, "ECRC Error" },
{ PCIM_AER_UC_UNSUPPORTED_REQUEST, "Unsupported Request" },
{ PCIM_AER_UC_ACS_VIOLATION, "ACS Violation" },
{ 0, NULL },
};
/* AER Corrected errors. */
static struct bit_table aer_cor[] = {
{ PCIM_AER_COR_RECEIVER_ERROR, "Receiver Error" },
{ PCIM_AER_COR_BAD_TLP, "Bad TLP" },
{ PCIM_AER_COR_BAD_DLLP, "Bad DLLP" },
{ PCIM_AER_COR_REPLAY_ROLLOVER, "REPLAY_NUM Rollover" },
{ PCIM_AER_COR_REPLAY_TIMEOUT, "Replay Timer Timeout" },
{ PCIM_AER_COR_ADVISORY_NF_ERROR, "Advisory Non-Fatal Error" },
{ 0, NULL },
};
static void
print_bits(const char *header, struct bit_table *table, uint32_t mask)
{
int first;
first = 1;
for (; table->desc != NULL; table++)
if (mask & table->mask) {
if (first) {
printf("%14s = ", header);
first = 0;
} else
printf(" ");
printf("%s\n", table->desc);
mask &= ~table->mask;
}
if (mask != 0) {
if (first)
printf("%14s = ", header);
else
printf(" ");
printf("Unknown: 0x%08x\n", mask);
}
}
void
list_errors(int fd, struct pci_conf *p)
{
uint32_t mask, severity;
uint16_t sta, aer;
uint8_t pcie;
/* First check for standard PCI errors. */
sta = read_config(fd, &p->pc_sel, PCIR_STATUS, 2);
print_bits("PCI errors", pci_status, sta & PCI_ERRORS);
/* See if this is a PCI-express device. */
pcie = pci_find_cap(fd, p, PCIY_EXPRESS);
if (pcie == 0)
return;
/* Check for PCI-e errors. */
sta = read_config(fd, &p->pc_sel, pcie + PCIR_EXPRESS_DEVICE_STA, 2);
print_bits("PCI-e errors", pcie_device_status, sta & PCIE_ERRORS);
/* See if this device supports AER. */
aer = pcie_find_cap(fd, p, PCIZ_AER);
if (aer == 0)
return;
/* Check for uncorrected errors. */
mask = read_config(fd, &p->pc_sel, aer + PCIR_AER_UC_STATUS, 4);
severity = read_config(fd, &p->pc_sel, aer + PCIR_AER_UC_SEVERITY, 4);
print_bits("Fatal", aer_uc, mask & severity);
print_bits("Non-fatal", aer_uc, mask & ~severity);
/* Check for corrected errors. */
mask = read_config(fd, &p->pc_sel, aer + PCIR_AER_COR_STATUS, 4);
print_bits("Corrected", aer_cor, mask);
}