freebsd-skq/sys/pci/simos.c
Alfred Perlstein 44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00

358 lines
7.5 KiB
C

/*-
* Copyright (c) 1998 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifdef COMPILING_LINT
#warning "The simos driver is broken and is not compiled with LINT"
#else
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <machine/clock.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <sys/kernel.h>
#include <pci/simos.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#ifndef COMPAT_OLDPCI
#error "The simos device requires the old pci compatibility shims"
#endif
#include <machine/alpha_cpu.h>
struct simos_softc {
int sc_unit;
SimOS_SCSI* sc_regs;
/*
* SimOS only supports one pending command.
*/
struct cam_sim *sc_sim;
struct cam_path *sc_path;
struct ccb_scsiio *sc_pending;
};
struct simos_softc* simosp[10];
static u_long simos_unit;
static const char *simos_probe(pcici_t tag, pcidi_t type);
static void simos_attach(pcici_t config_d, int unit);
static void simos_action(struct cam_sim *sim, union ccb *ccb);
static void simos_poll(struct cam_sim *sim);
struct pci_device simos_driver = {
"simos",
simos_probe,
simos_attach,
&simos_unit,
NULL
};
COMPAT_PCI_DRIVER (simos, simos_driver);
static const char *
simos_probe(pcici_t tag, pcidi_t type)
{
switch (type) {
case 0x1291|(0x1291<<16):
return "SimOS SCSI";
default:
return NULL;
}
}
static void
simos_attach(pcici_t config_id, int unit)
{
struct simos_softc* sc;
struct cam_devq *devq;
sc = malloc(sizeof(struct simos_softc), M_DEVBUF, M_ZERO);
simosp[unit] = sc;
sc->sc_unit = unit;
sc->sc_regs = (SimOS_SCSI*) SIMOS_SCSI_ADDR;
sc->sc_pending = 0;
devq = cam_simq_alloc(/*maxopenings*/1);
if (devq == NULL)
return;
sc->sc_sim = cam_sim_alloc(simos_action, simos_poll, "simos", sc, unit,
/*untagged*/1, /*tagged*/0, devq);
if (sc->sc_sim == NULL) {
cam_simq_free(devq);
return;
}
if (xpt_bus_register(sc->sc_sim, /*bus*/0) != CAM_SUCCESS) {
cam_sim_free(sc->sc_sim, /*free_devq*/TRUE);
return;
}
if (xpt_create_path(&sc->sc_path, /*periph*/NULL,
cam_sim_path(sc->sc_sim), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sc->sc_sim));
cam_sim_free(sc->sc_sim, /*free_devq*/TRUE);
return;
}
alpha_register_pci_scsi(config_id->bus, config_id->slot, sc->sc_sim);
return;
}
static void
simos_start(struct simos_softc* sc, struct ccb_scsiio *csio)
{
struct scsi_generic *cmd;
int cmdlen;
caddr_t data;
int datalen;
int s;
u_int8_t* p;
int i, count, target;
vm_offset_t va;
vm_size_t size;
cmd = (struct scsi_generic *) &csio->cdb_io.cdb_bytes;
cmdlen = csio->cdb_len;
data = csio->data_ptr;
datalen = csio->dxfer_len;
/*
* Simos doesn't understand some commands
*/
if (cmd->opcode == START_STOP || cmd->opcode == PREVENT_ALLOW
|| cmd->opcode == SYNCHRONIZE_CACHE) {
csio->ccb_h.status = CAM_REQ_CMP;
xpt_done((union ccb *) csio);
return;
}
if (sc->sc_pending) {
/*
* Don't think this can happen.
*/
printf("simos_start: can't start command while one is pending\n");
csio->ccb_h.status = CAM_BUSY;
xpt_done((union ccb *) csio);
return;
}
s = splcam();
csio->ccb_h.status |= CAM_SIM_QUEUED;
sc->sc_pending = csio;
target = csio->ccb_h.target_id;
/*
* Copy the command into SimOS' buffer
*/
p = (u_int8_t*) cmd;
count = cmdlen;
for (i = 0; i < count; i++)
sc->sc_regs->cmd[i] = *p++;
sc->sc_regs->length = count;
sc->sc_regs->target = target;
sc->sc_regs->lun = csio->ccb_h.target_lun;
/*
* Setup the segment descriptors.
*/
va = (vm_offset_t) data;
size = datalen;
i = 0;
while (size > 0) {
vm_size_t len = PAGE_SIZE - (va & PAGE_MASK);
if (len > size)
len = size;
sc->sc_regs->sgMap[i].pAddr = vtophys(va);
sc->sc_regs->sgMap[i].len = len;
size -= len;
va += len;
i++;
}
sc->sc_regs->sgLen = i;
/*
* Start the i/o.
*/
alpha_wmb();
sc->sc_regs->startIO = 1;
alpha_wmb();
splx(s);
}
static void
simos_done(struct simos_softc* sc)
{
struct ccb_scsiio* csio = sc->sc_pending;
int s, done;
/*
* Spurious interrupt caused by my bogus interrupt broadcasting.
*/
if (!csio)
return;
sc->sc_pending = 0;
done = sc->sc_regs->done[csio->ccb_h.target_id];
if (!done)
return;
s = splcam();
if (done >> 16)
/* Error detected */
csio->ccb_h.status = CAM_CMD_TIMEOUT;
else
csio->ccb_h.status = CAM_REQ_CMP;
/*
* Ack the interrupt to clear it.
*/
sc->sc_regs->done[csio->ccb_h.target_id] = 1;
alpha_wmb();
xpt_done((union ccb *) csio);
splx(s);
}
static void
simos_action(struct cam_sim *sim, union ccb *ccb)
{
struct simos_softc* sc = (struct simos_softc *)sim->softc;
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
{
struct ccb_scsiio *csio;
csio = &ccb->csio;
simos_start(sc, csio);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t size_mb;
u_int32_t secs_per_cylinder;
ccg = &ccb->ccg;
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
ccg->heads = 64;
ccg->secs_per_track = 32;
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS:
{
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->max_target = 2;
cpi->max_lun = 0;
cpi->initiator_id = 7;
cpi->bus_id = sim->bus_id;
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "SimOS", HBA_IDLEN);
strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
cpi->unit_number = sim->unit_number;
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static void
simos_poll(struct cam_sim *sim)
{
simos_done(cam_sim_softc(sim));
}
void
simos_intr(int unit)
{
/* XXX bogus */
struct simos_softc* sc = simosp[unit];
simos_done(sc);
}
#endif /* !COMPILING_LINT */