freebsd-skq/crypto/heimdal/doc/kerberos4.texi

227 lines
9.4 KiB
Plaintext

@c $Id: kerberos4.texi,v 1.16 2001/07/19 17:17:46 assar Exp $
@node Kerberos 4 issues, Windows 2000 compatability, Things in search for a better place, Top
@comment node-name, next, previous, up
@chapter Kerberos 4 issues
If compiled with version 4 support, the KDC can serve requests from a
Kerberos 4 client. There are a few things you must do for this to work.
The KDC will also have kaserver emulation and be able to handle
AFS-clients that use @code{klog}.
@menu
* Principal conversion issues::
* Converting a version 4 database::
* kaserver::
@end menu
@node Principal conversion issues, Converting a version 4 database, Kerberos 4 issues, Kerberos 4 issues
@section Principal conversion issues
First, Kerberos 4 and Kerberos 5 principals are different. A version 4
principal consists of a name, an instance, and a realm. A version 5
principal has one or more components, and a realm (the terms ``name''
and ``instance'' are still used, for the first and second component,
respectively). Also, in some cases the name of a version 4 principal
differs from the first component of the corresponding version 5
principal. One notable example is the ``host'' type principals, where
the version 4 name is @samp{rcmd} (for ``remote command''), and the
version 5 name is @samp{host}. For the class of principals that has a
hostname as instance, there is an other major difference, Kerberos 4
uses only the first component of the hostname, whereas Kerberos 5 uses
the fully qualified hostname.
Because of this it can be hard or impossible to correctly convert a
version 4 principal to a version 5 principal @footnote{the other way is
not always trivial either, but usually easier}. The biggest problem is
to know if the conversion resulted in a valid principal. To give an
example, suppose you want to convert the principal @samp{rcmd.foo}.
The @samp{rcmd} name suggests that the instance is a hostname (even if
there are exceptions to this rule). To correctly convert the instance
@samp{foo} to a hostname, you have to know which host it is referring
to. You can to this by either guessing (from the realm) which domain
name to append, or you have to have a list of possible hostnames. In the
simplest cases you can cover most principals with the first rule. If you
have several domains sharing a single realm this will not usually
work. If the exceptions are few you can probably come by with a lookup
table for the exceptions.
In a complex scenario you will need some kind of host lookup mechanism.
Using DNS for this is tempting, but DNS is error prone, slow and unsafe
@footnote{at least until secure DNS is commonly available}.
Fortunately, the KDC has a trump on hand: it can easily tell if a
principal exists in the database. The KDC will use
@code{krb5_425_conv_principal_ext} to convert principals when handling
to version 4 requests.
@node Converting a version 4 database, kaserver , Principal conversion issues, Kerberos 4 issues
@section Converting a version 4 database
If you want to convert an existing version 4 database, the principal
conversion issue arises too.
If you decide to convert your database once and for all, you will only
have to do this conversion once. It is also possible to run a version 5
KDC as a slave to a version 4 KDC. In this case this conversion will
happen every time the database is propagated. When doing this
conversion, there are a few things to look out for. If you have stale
entries in the database, these entries will not be converted. This might
be because these principals are not used anymore, or it might be just
because the principal couldn't be converted.
You might also see problems with a many-to-one mapping of
principals. For instance, if you are using DNS lookups and you have two
principals @samp{rcmd.foo} and @samp{rcmd.bar}, where `foo' is a CNAME
for `bar', the resulting principals will be the same. Since the
conversion function can't tell which is correct, these conflicts will
have to be resolved manually.
@subsection Conversion example
Given the following set of hosts and services:
@example
foo.se rcmd
mail.foo.se rcmd, pop
ftp.bar.se rcmd, ftp
@end example
you have a database that consists of the following principals:
@samp{rcmd.foo}, @samp{rcmd.mail}, @samp{pop.mail}, @samp{rcmd.ftp}, and
@samp{ftp.ftp}.
lets say you also got these extra principals: @samp{rcmd.gone},
@samp{rcmd.old-mail}, where @samp{gone.foo.se} was a machine that has
now passed away, and @samp{old-mail.foo.se} was an old mail machine that
is now a CNAME for @samp{mail.foo.se}.
When you convert this database you want the following conversions to be
done:
@example
rcmd.foo host/foo.se
rcmd.mail host/mail.foo.se
pop.mail pop/mail.foo.se
rcmd.ftp host/ftp.bar.se
ftp.ftp ftp/ftp.bar.se
rcmd.gone @i{removed}
rcmd.old-mail @i{removed}
@end example
A @file{krb5.conf} that does this looks like:
@example
[realms]
FOO.SE = @{
v4_name_convert = @{
host = @{
ftp = ftp
pop = pop
rcmd = host
@}
@}
v4_instance_convert = @{
foo = foo.se
ftp = ftp.bar.se
@}
default_domain = foo.se
@}
@end example
The @samp{v4_name_convert} section says which names should be considered
having an instance consisting of a hostname, and it also says how the
names should be converted (for instance @samp{rcmd} should be converted
to @samp{host}). The @samp{v4_instance_convert} section says how a
hostname should be qualified (this is just a hosts-file in
disguise). Host-instances that aren't covered by
@samp{v4_instance_convert} are qualified by appending the contents of
the @samp{default_domain}.
Actually, this example doesn't work. Or rather, it works to well. Since
it has no way of knowing which hostnames are valid and which are not, it
will happily convert @samp{rcmd.gone} to @samp{host/gone.foo.se}. This
isn't a big problem, but if you have run your kerberos realm for a few
years, chances are big that you have quite a few `junk' principals.
If you don't want this you can remove the @samp{default_domain}
statement, but then you will have to add entries for @emph{all} your hosts
in the @samp{v4_instance_convert} section.
Instead of doing this you can use DNS to convert instances. This is not
a solution without problems, but it is probably easier than adding lots
of static host entries.
To enable DNS lookup you should turn on @samp{v4_instance_resolve} in
the @samp{[libdefaults]} section.
@subsection Converting a database
The database conversion is done with @samp{hprop}. You can run this
command to propagate the database to the machine called
@samp{slave-server} (which should be running a @samp{hpropd}).
@example
hprop --source=krb4-db --master-key=/.m slave-server
@end example
This command can also be to use for converting the v4 database on the
server:
@example
hprop -n --source=krb4-db -d /var/kerberos/principal --master-key=/.m | hpropd -n
@end example
@section Version 4 Kadmin
@samp{kadmind} can act as a version 4 kadmind, and you can do most
operations, but with some restrictions (since the version 4 kadmin
protocol is, lets say, very ad hoc.) One example is that it only passes
des keys when creating principals and changing passwords (modern kpasswd
clients do send the password, so it's possible to to password quality
checks). Because of this you can only create principals with des keys,
and you can't set any flags or do any other fancy stuff.
To get this to work, you have to add another entry to inetd (since
version 4 uses port 751, not 749).
@emph{And then there are a many more things you can do; more on this in
a later version of this manual. Until then, UTSL.}
@node kaserver, , Converting a version 4 database, Kerberos 4 issues
@section kaserver
@subsection kaserver emulation
The Heimdal kdc can emulate a kaserver. The kaserver is a Kerberos 4
server with pre-authentication using Rx as the on-wire protocol. The kdc
contains a minimalistic Rx implementation.
There are three parts of the kaserver; KAA (Authentication), KAT (Ticket
Granting), and KAM (Maintenance). The KAA interface and KAT interface
both passes over DES encrypted data-blobs (just like the
Kerberos-protocol) and thus do not need any other protection. The KAM
interface uses @code{rxkad} (Kerberos authentication layer for Rx) for
security and data protection, and is used for example for changing
passwords. This part is not implemented in the kdc.
Another difference between the ka-protocol and the Kerberos 4 protocol
is that the pass-phrase is salted with the cellname in the @code{string to
key} function in the ka-protocol, while in the Kerberos 4 protocol there
is no salting of the password at all. To make sure AFS-compatible keys
are added to each principals when they are created or their password are
changed, @samp{afs3-salt} should be added to
@samp{[kadmin]default_keys}.
@subsection Transarc AFS Windows client
The Transarc Windows client uses Kerberos 4 to obtain tokens, and thus
does not need a kaserver. The Windows client assumes that the Kerberos
server is on the same machine as the AFS-database server. If you do not
like to do that you can add a small program that runs on the database
servers that forward all kerberos requests to the real kerberos
server. A program that does this is @code{krb-forward}
(@url{ftp://ftp.stacken.kth.se/pub/projekts/krb-forward}).