freebsd-skq/sys/dev/usb/ucomvar.h
phk fd3b3185c9 Use generic infrastructure for the ucom driver instead of local stuff.
This changes the naming of USB serial devices to: /dev/ttyU%d and
/dev/cuaU%d for call-in and call-out devices respectively.  (Please
notice: capital 'U')

Please also note that we now have .init and .lock devices for USB
serial ports.  These are not persistent across device removal.  devd(8)
can be used to configure them on attachment time.

These changes also improve the chances of the system surviving if
the USB device is unplugged at an inconvenient time.  At least we
do not rip things apart while there are any threads in the device
driver anymore.

	Remove cdevsw, rely on the tty generic one.

	Don't make_dev(), use ttycreate() which does all the magic.

	In detach, do close procesing if we ripped things apart
	while the device was open.  Call ttyfree() once we're done
	cleaning up.
2004-09-28 20:23:49 +00:00

165 lines
6.3 KiB
C

/* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */
/* $FreeBSD$ */
/*-
* Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/* Module interface related macros */
#define UCOM_MODVER 1
#define UCOM_MINVER 1
#define UCOM_PREFVER UCOM_MODVER
#define UCOM_MAXVER 1
/* Macros to clear/set/test flags. */
#define SET(t, f) (t) |= (f)
#define CLR(t, f) (t) &= ~((unsigned)(f))
#define ISSET(t, f) ((t) & (f))
#define UCOM_CALLOUT_MASK 0x80
#define UCOMUNIT_MASK 0x3ff7f
#define UCOMDIALOUT_MASK 0x80000
#define UCOMCALLUNIT_MASK 0x40000
#define UCOMUNIT(x) (minor(x) & UCOMUNIT_MASK)
#define UCOMDIALOUT(x) (minor(x) & UCOMDIALOUT_MASK)
#define UCOMCALLUNIT(x) (minor(x) & UCOMCALLUNIT_MASK)
#define UCOM_UNK_PORTNO -1 /* XXX */
struct ucom_softc;
struct ucom_callback {
void (*ucom_get_status)(void *, int, u_char *, u_char *);
void (*ucom_set)(void *, int, int, int);
#define UCOM_SET_DTR 1
#define UCOM_SET_RTS 2
#define UCOM_SET_BREAK 3
int (*ucom_param)(void *, int, struct termios *);
int (*ucom_ioctl)(void *, int, u_long, caddr_t, int, usb_proc_ptr);
int (*ucom_open)(void *, int);
void (*ucom_close)(void *, int);
void (*ucom_read)(void *, int, u_char **, u_int32_t *);
void (*ucom_write)(void *, int, u_char *, u_char *, u_int32_t *);
};
/* line status register */
#define ULSR_RCV_FIFO 0x80
#define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */
#define ULSR_TXRDY 0x20 /* Transmitter buffer empty */
#define ULSR_BI 0x10 /* Break detected */
#define ULSR_FE 0x08 /* Framing error: bad stop bit */
#define ULSR_PE 0x04 /* Parity error */
#define ULSR_OE 0x02 /* Overrun, lost incoming byte */
#define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */
#define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */
/* ucom state declarations */
#define UCS_RXSTOP 0x0001 /* Rx stopped */
#define UCS_RTS_IFLOW 0x0008 /* use RTS input flow control */
struct ucom_softc {
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev; /* USB device */
usbd_interface_handle sc_iface; /* data interface */
int sc_bulkin_no; /* bulk in endpoint address */
usbd_pipe_handle sc_bulkin_pipe; /* bulk in pipe */
usbd_xfer_handle sc_ixfer; /* read request */
u_char *sc_ibuf; /* read buffer */
u_int sc_ibufsize; /* read buffer size */
u_int sc_ibufsizepad; /* read buffer size padded */
int sc_bulkout_no; /* bulk out endpoint address */
usbd_pipe_handle sc_bulkout_pipe;/* bulk out pipe */
usbd_xfer_handle sc_oxfer; /* write request */
u_char *sc_obuf; /* write buffer */
u_int sc_obufsize; /* write buffer size */
u_int sc_opkthdrlen; /* header length of
output packet */
struct ucom_callback *sc_callback;
void *sc_parent;
int sc_portno;
struct tty *sc_tty; /* our tty */
int sc_state;
int sc_poll;
u_char sc_lsr;
u_char sc_msr;
u_char sc_mcr;
u_char sc_dying; /* disconnecting */
};
extern devclass_t ucom_devclass;
int ucom_attach(struct ucom_softc *);
int ucom_detach(struct ucom_softc *);
void ucom_status_change(struct ucom_softc *);