cc734417b3
on our own. This prevents hangs at boot when using a bm(4) NIC where the cable is not plugged in at boot time. Obtained from: NetBSD MFC after: 1 week
1451 lines
34 KiB
C
1451 lines
34 KiB
C
/*-
|
|
* Copyright 2008 Nathan Whitehorn. All rights reserved.
|
|
* Copyright 2003 by Peter Grehan. All rights reserved.
|
|
* Copyright (C) 1998, 1999, 2000 Tsubai Masanari. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* From:
|
|
* NetBSD: if_bm.c,v 1.9.2.1 2000/11/01 15:02:49 tv Exp
|
|
*/
|
|
|
|
/*
|
|
* BMAC/BMAC+ Macio cell 10/100 ethernet driver
|
|
* The low-cost, low-feature Apple variant of the Sun HME
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/module.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <machine/pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/openfirm.h>
|
|
#include <machine/dbdma.h>
|
|
|
|
MODULE_DEPEND(bm, ether, 1, 1, 1);
|
|
MODULE_DEPEND(bm, miibus, 1, 1, 1);
|
|
|
|
/* "controller miibus0" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
#include "if_bmreg.h"
|
|
#include "if_bmvar.h"
|
|
|
|
static int bm_probe (device_t);
|
|
static int bm_attach (device_t);
|
|
static int bm_detach (device_t);
|
|
static int bm_shutdown (device_t);
|
|
|
|
static void bm_start (struct ifnet *);
|
|
static void bm_start_locked (struct ifnet *);
|
|
static int bm_encap (struct bm_softc *sc, struct mbuf **m_head);
|
|
static int bm_ioctl (struct ifnet *, u_long, caddr_t);
|
|
static void bm_init (void *);
|
|
static void bm_init_locked (struct bm_softc *sc);
|
|
static void bm_chip_setup (struct bm_softc *sc);
|
|
static void bm_stop (struct bm_softc *sc);
|
|
static void bm_setladrf (struct bm_softc *sc);
|
|
static void bm_dummypacket (struct bm_softc *sc);
|
|
static void bm_txintr (void *xsc);
|
|
static void bm_rxintr (void *xsc);
|
|
|
|
static int bm_add_rxbuf (struct bm_softc *sc, int i);
|
|
static int bm_add_rxbuf_dma (struct bm_softc *sc, int i);
|
|
static void bm_enable_interrupts (struct bm_softc *sc);
|
|
static void bm_disable_interrupts (struct bm_softc *sc);
|
|
static void bm_tick (void *xsc);
|
|
|
|
static int bm_ifmedia_upd (struct ifnet *);
|
|
static void bm_ifmedia_sts (struct ifnet *, struct ifmediareq *);
|
|
|
|
static void bm_miicsr_dwrite (struct bm_softc *, u_int16_t);
|
|
static void bm_mii_writebit (struct bm_softc *, int);
|
|
static int bm_mii_readbit (struct bm_softc *);
|
|
static void bm_mii_sync (struct bm_softc *);
|
|
static void bm_mii_send (struct bm_softc *, u_int32_t, int);
|
|
static int bm_mii_readreg (struct bm_softc *, struct bm_mii_frame *);
|
|
static int bm_mii_writereg (struct bm_softc *, struct bm_mii_frame *);
|
|
static int bm_miibus_readreg (device_t, int, int);
|
|
static int bm_miibus_writereg (device_t, int, int, int);
|
|
static void bm_miibus_statchg (device_t);
|
|
|
|
static device_method_t bm_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, bm_probe),
|
|
DEVMETHOD(device_attach, bm_attach),
|
|
DEVMETHOD(device_detach, bm_detach),
|
|
DEVMETHOD(device_shutdown, bm_shutdown),
|
|
|
|
/* bus interface, for miibus */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, bm_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, bm_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, bm_miibus_statchg),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t bm_macio_driver = {
|
|
"bm",
|
|
bm_methods,
|
|
sizeof(struct bm_softc)
|
|
};
|
|
|
|
static devclass_t bm_devclass;
|
|
|
|
DRIVER_MODULE(bm, macio, bm_macio_driver, bm_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, bm, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
/*
|
|
* MII internal routines
|
|
*/
|
|
|
|
/*
|
|
* Write to the MII csr, introducing a delay to allow valid
|
|
* MII clock pulses to be formed
|
|
*/
|
|
static void
|
|
bm_miicsr_dwrite(struct bm_softc *sc, u_int16_t val)
|
|
{
|
|
CSR_WRITE_2(sc, BM_MII_CSR, val);
|
|
/*
|
|
* Assume this is a clock toggle and generate a 1us delay
|
|
* to cover both MII's 160ns high/low minimum and 400ns
|
|
* cycle miniumum
|
|
*/
|
|
DELAY(1);
|
|
}
|
|
|
|
/*
|
|
* Write a bit to the MII bus.
|
|
*/
|
|
static void
|
|
bm_mii_writebit(struct bm_softc *sc, int bit)
|
|
{
|
|
u_int16_t regval;
|
|
|
|
regval = BM_MII_OENABLE;
|
|
if (bit)
|
|
regval |= BM_MII_DATAOUT;
|
|
|
|
bm_miicsr_dwrite(sc, regval);
|
|
bm_miicsr_dwrite(sc, regval | BM_MII_CLK);
|
|
bm_miicsr_dwrite(sc, regval);
|
|
}
|
|
|
|
/*
|
|
* Read a bit from the MII bus.
|
|
*/
|
|
static int
|
|
bm_mii_readbit(struct bm_softc *sc)
|
|
{
|
|
u_int16_t regval, bitin;
|
|
|
|
/* ~BM_MII_OENABLE */
|
|
regval = 0;
|
|
|
|
bm_miicsr_dwrite(sc, regval);
|
|
bm_miicsr_dwrite(sc, regval | BM_MII_CLK);
|
|
bm_miicsr_dwrite(sc, regval);
|
|
bitin = CSR_READ_2(sc, BM_MII_CSR) & BM_MII_DATAIN;
|
|
|
|
return (bitin == BM_MII_DATAIN);
|
|
}
|
|
|
|
/*
|
|
* Sync the PHYs by setting data bit and strobing the clock 32 times.
|
|
*/
|
|
static void
|
|
bm_mii_sync(struct bm_softc *sc)
|
|
{
|
|
int i;
|
|
u_int16_t regval;
|
|
|
|
regval = BM_MII_OENABLE | BM_MII_DATAOUT;
|
|
|
|
bm_miicsr_dwrite(sc, regval);
|
|
for (i = 0; i < 32; i++) {
|
|
bm_miicsr_dwrite(sc, regval | BM_MII_CLK);
|
|
bm_miicsr_dwrite(sc, regval);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Clock a series of bits through the MII.
|
|
*/
|
|
static void
|
|
bm_mii_send(struct bm_softc *sc, u_int32_t bits, int cnt)
|
|
{
|
|
int i;
|
|
|
|
for (i = (0x1 << (cnt - 1)); i; i >>= 1)
|
|
bm_mii_writebit(sc, bits & i);
|
|
}
|
|
|
|
/*
|
|
* Read a PHY register through the MII.
|
|
*/
|
|
static int
|
|
bm_mii_readreg(struct bm_softc *sc, struct bm_mii_frame *frame)
|
|
{
|
|
int i, ack, bit;
|
|
|
|
/*
|
|
* Set up frame for RX.
|
|
*/
|
|
frame->mii_stdelim = BM_MII_STARTDELIM;
|
|
frame->mii_opcode = BM_MII_READOP;
|
|
frame->mii_turnaround = 0;
|
|
frame->mii_data = 0;
|
|
|
|
/*
|
|
* Sync the PHYs
|
|
*/
|
|
bm_mii_sync(sc);
|
|
|
|
/*
|
|
* Send command/address info
|
|
*/
|
|
bm_mii_send(sc, frame->mii_stdelim, 2);
|
|
bm_mii_send(sc, frame->mii_opcode, 2);
|
|
bm_mii_send(sc, frame->mii_phyaddr, 5);
|
|
bm_mii_send(sc, frame->mii_regaddr, 5);
|
|
|
|
/*
|
|
* Check for ack.
|
|
*/
|
|
ack = bm_mii_readbit(sc);
|
|
|
|
/*
|
|
* Now try reading data bits. If the ack failed, we still
|
|
* need to clock through 16 cycles to keep the PHY(s) in sync.
|
|
*/
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
bit = bm_mii_readbit(sc);
|
|
if (!ack && bit)
|
|
frame->mii_data |= i;
|
|
}
|
|
|
|
/*
|
|
* Skip through idle bit-times
|
|
*/
|
|
bm_mii_writebit(sc, 0);
|
|
bm_mii_writebit(sc, 0);
|
|
|
|
return ((ack) ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* Write to a PHY register through the MII.
|
|
*/
|
|
static int
|
|
bm_mii_writereg(struct bm_softc *sc, struct bm_mii_frame *frame)
|
|
{
|
|
/*
|
|
* Set up frame for tx
|
|
*/
|
|
frame->mii_stdelim = BM_MII_STARTDELIM;
|
|
frame->mii_opcode = BM_MII_WRITEOP;
|
|
frame->mii_turnaround = BM_MII_TURNAROUND;
|
|
|
|
/*
|
|
* Sync the phy and start the bitbang write sequence
|
|
*/
|
|
bm_mii_sync(sc);
|
|
|
|
bm_mii_send(sc, frame->mii_stdelim, 2);
|
|
bm_mii_send(sc, frame->mii_opcode, 2);
|
|
bm_mii_send(sc, frame->mii_phyaddr, 5);
|
|
bm_mii_send(sc, frame->mii_regaddr, 5);
|
|
bm_mii_send(sc, frame->mii_turnaround, 2);
|
|
bm_mii_send(sc, frame->mii_data, 16);
|
|
|
|
/*
|
|
* Idle bit.
|
|
*/
|
|
bm_mii_writebit(sc, 0);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* MII bus i/f
|
|
*/
|
|
static int
|
|
bm_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct bm_softc *sc;
|
|
struct bm_mii_frame frame;
|
|
|
|
sc = device_get_softc(dev);
|
|
bzero(&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = phy;
|
|
frame.mii_regaddr = reg;
|
|
|
|
bm_mii_readreg(sc, &frame);
|
|
|
|
return (frame.mii_data);
|
|
}
|
|
|
|
static int
|
|
bm_miibus_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct bm_softc *sc;
|
|
struct bm_mii_frame frame;
|
|
|
|
sc = device_get_softc(dev);
|
|
bzero(&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = phy;
|
|
frame.mii_regaddr = reg;
|
|
frame.mii_data = data;
|
|
|
|
bm_mii_writereg(sc, &frame);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bm_miibus_statchg(device_t dev)
|
|
{
|
|
struct bm_softc *sc = device_get_softc(dev);
|
|
uint16_t reg;
|
|
int new_duplex;
|
|
|
|
reg = CSR_READ_2(sc, BM_TX_CONFIG);
|
|
new_duplex = IFM_OPTIONS(sc->sc_mii->mii_media_active) & IFM_FDX;
|
|
|
|
if (new_duplex != sc->sc_duplex) {
|
|
/* Turn off TX MAC while we fiddle its settings */
|
|
reg &= ~BM_ENABLE;
|
|
|
|
CSR_WRITE_2(sc, BM_TX_CONFIG, reg);
|
|
while (CSR_READ_2(sc, BM_TX_CONFIG) & BM_ENABLE)
|
|
DELAY(10);
|
|
}
|
|
|
|
if (new_duplex && !sc->sc_duplex)
|
|
reg |= BM_TX_IGNORECOLL | BM_TX_FULLDPX;
|
|
else if (!new_duplex && sc->sc_duplex)
|
|
reg &= ~(BM_TX_IGNORECOLL | BM_TX_FULLDPX);
|
|
|
|
if (new_duplex != sc->sc_duplex) {
|
|
/* Turn TX MAC back on */
|
|
reg |= BM_ENABLE;
|
|
|
|
CSR_WRITE_2(sc, BM_TX_CONFIG, reg);
|
|
sc->sc_duplex = new_duplex;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ifmedia/mii callbacks
|
|
*/
|
|
static int
|
|
bm_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct bm_softc *sc = ifp->if_softc;
|
|
int error;
|
|
|
|
BM_LOCK(sc);
|
|
error = mii_mediachg(sc->sc_mii);
|
|
BM_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
bm_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifm)
|
|
{
|
|
struct bm_softc *sc = ifp->if_softc;
|
|
|
|
BM_LOCK(sc);
|
|
mii_pollstat(sc->sc_mii);
|
|
ifm->ifm_active = sc->sc_mii->mii_media_active;
|
|
ifm->ifm_status = sc->sc_mii->mii_media_status;
|
|
BM_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Macio probe/attach
|
|
*/
|
|
static int
|
|
bm_probe(device_t dev)
|
|
{
|
|
const char *dname = ofw_bus_get_name(dev);
|
|
const char *dcompat = ofw_bus_get_compat(dev);
|
|
|
|
/*
|
|
* BMAC+ cells have a name of "ethernet" and
|
|
* a compatible property of "bmac+"
|
|
*/
|
|
if (strcmp(dname, "bmac") == 0) {
|
|
device_set_desc(dev, "Apple BMAC Ethernet Adaptor");
|
|
} else if (strcmp(dcompat, "bmac+") == 0) {
|
|
device_set_desc(dev, "Apple BMAC+ Ethernet Adaptor");
|
|
} else
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bm_attach(device_t dev)
|
|
{
|
|
phandle_t node;
|
|
u_char *eaddr;
|
|
struct ifnet *ifp;
|
|
int error, cellid, i;
|
|
struct bm_txsoft *txs;
|
|
struct bm_softc *sc = device_get_softc(dev);
|
|
|
|
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
|
|
ifp->if_softc = sc;
|
|
sc->sc_dev = dev;
|
|
sc->sc_duplex = ~IFM_FDX;
|
|
|
|
error = 0;
|
|
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
callout_init_mtx(&sc->sc_tick_ch, &sc->sc_mtx, 0);
|
|
|
|
/* Check for an improved version of Paddington */
|
|
sc->sc_streaming = 0;
|
|
cellid = -1;
|
|
node = ofw_bus_get_node(dev);
|
|
|
|
OF_getprop(node, "cell-id", &cellid, sizeof(cellid));
|
|
if (cellid >= 0xc4)
|
|
sc->sc_streaming = 1;
|
|
|
|
sc->sc_memrid = 0;
|
|
sc->sc_memr = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&sc->sc_memrid, RF_ACTIVE);
|
|
if (sc->sc_memr == NULL) {
|
|
device_printf(dev, "Could not alloc chip registers!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
sc->sc_txdmarid = BM_TXDMA_REGISTERS;
|
|
sc->sc_rxdmarid = BM_RXDMA_REGISTERS;
|
|
|
|
sc->sc_txdmar = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&sc->sc_txdmarid, RF_ACTIVE);
|
|
sc->sc_rxdmar = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&sc->sc_rxdmarid, RF_ACTIVE);
|
|
|
|
if (sc->sc_txdmar == NULL || sc->sc_rxdmar == NULL) {
|
|
device_printf(dev, "Could not map DBDMA registers!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
error = dbdma_allocate_channel(sc->sc_txdmar, 0, bus_get_dma_tag(dev),
|
|
BM_MAX_DMA_COMMANDS, &sc->sc_txdma);
|
|
error += dbdma_allocate_channel(sc->sc_rxdmar, 0, bus_get_dma_tag(dev),
|
|
BM_MAX_DMA_COMMANDS, &sc->sc_rxdma);
|
|
|
|
if (error) {
|
|
device_printf(dev,"Could not allocate DBDMA channel!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* alloc DMA tags and buffers */
|
|
error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL,
|
|
NULL, &sc->sc_pdma_tag);
|
|
|
|
if (error) {
|
|
device_printf(dev,"Could not allocate DMA tag!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdma_tag, 1, 0, BUS_SPACE_MAXADDR,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES,
|
|
BUS_DMA_ALLOCNOW, NULL, NULL, &sc->sc_rdma_tag);
|
|
|
|
if (error) {
|
|
device_printf(dev,"Could not allocate RX DMA channel!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdma_tag, 1, 0, BUS_SPACE_MAXADDR,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES * BM_NTXSEGS, BM_NTXSEGS,
|
|
MCLBYTES, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->sc_tdma_tag);
|
|
|
|
if (error) {
|
|
device_printf(dev,"Could not allocate TX DMA tag!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* init transmit descriptors */
|
|
STAILQ_INIT(&sc->sc_txfreeq);
|
|
STAILQ_INIT(&sc->sc_txdirtyq);
|
|
|
|
/* create TX DMA maps */
|
|
error = ENOMEM;
|
|
for (i = 0; i < BM_MAX_TX_PACKETS; i++) {
|
|
txs = &sc->sc_txsoft[i];
|
|
txs->txs_mbuf = NULL;
|
|
error = bus_dmamap_create(sc->sc_tdma_tag, 0, &txs->txs_dmamap);
|
|
if (error) {
|
|
device_printf(sc->sc_dev,
|
|
"unable to create TX DMA map %d, error = %d\n",
|
|
i, error);
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
/* Create the receive buffer DMA maps. */
|
|
for (i = 0; i < BM_MAX_RX_PACKETS; i++) {
|
|
error = bus_dmamap_create(sc->sc_rdma_tag, 0,
|
|
&sc->sc_rxsoft[i].rxs_dmamap);
|
|
if (error) {
|
|
device_printf(sc->sc_dev,
|
|
"unable to create RX DMA map %d, error = %d\n",
|
|
i, error);
|
|
}
|
|
sc->sc_rxsoft[i].rxs_mbuf = NULL;
|
|
}
|
|
|
|
/* alloc interrupt */
|
|
bm_disable_interrupts(sc);
|
|
|
|
sc->sc_txdmairqid = BM_TXDMA_INTERRUPT;
|
|
sc->sc_txdmairq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->sc_txdmairqid, RF_ACTIVE);
|
|
|
|
if (error) {
|
|
device_printf(dev,"Could not allocate TX interrupt!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
bus_setup_intr(dev,sc->sc_txdmairq,
|
|
INTR_TYPE_MISC | INTR_MPSAFE | INTR_ENTROPY, NULL, bm_txintr, sc,
|
|
&sc->sc_txihtx);
|
|
|
|
sc->sc_rxdmairqid = BM_RXDMA_INTERRUPT;
|
|
sc->sc_rxdmairq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->sc_rxdmairqid, RF_ACTIVE);
|
|
|
|
if (error) {
|
|
device_printf(dev,"Could not allocate RX interrupt!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
bus_setup_intr(dev,sc->sc_rxdmairq,
|
|
INTR_TYPE_MISC | INTR_MPSAFE | INTR_ENTROPY, NULL, bm_rxintr, sc,
|
|
&sc->sc_rxih);
|
|
|
|
/*
|
|
* Get the ethernet address from OpenFirmware
|
|
*/
|
|
eaddr = sc->sc_enaddr;
|
|
OF_getprop(node, "local-mac-address", eaddr, ETHER_ADDR_LEN);
|
|
|
|
/*
|
|
* Setup MII
|
|
* On Apple BMAC controllers, we end up in a weird state of
|
|
* partially-completed autonegotiation on boot. So we force
|
|
* autonegotation to try again.
|
|
*/
|
|
error = mii_attach(dev, &sc->sc_miibus, ifp, bm_ifmedia_upd,
|
|
bm_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY,
|
|
MIIF_FORCEANEG);
|
|
if (error != 0) {
|
|
device_printf(dev, "attaching PHYs failed\n");
|
|
return (error);
|
|
}
|
|
|
|
/* reset the adapter */
|
|
bm_chip_setup(sc);
|
|
|
|
sc->sc_mii = device_get_softc(sc->sc_miibus);
|
|
|
|
if_initname(ifp, device_get_name(sc->sc_dev),
|
|
device_get_unit(sc->sc_dev));
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_start = bm_start;
|
|
ifp->if_ioctl = bm_ioctl;
|
|
ifp->if_init = bm_init;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, BM_MAX_TX_PACKETS);
|
|
ifp->if_snd.ifq_drv_maxlen = BM_MAX_TX_PACKETS;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/* Attach the interface. */
|
|
ether_ifattach(ifp, sc->sc_enaddr);
|
|
ifp->if_hwassist = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bm_detach(device_t dev)
|
|
{
|
|
struct bm_softc *sc = device_get_softc(dev);
|
|
|
|
BM_LOCK(sc);
|
|
bm_stop(sc);
|
|
BM_UNLOCK(sc);
|
|
|
|
callout_drain(&sc->sc_tick_ch);
|
|
ether_ifdetach(sc->sc_ifp);
|
|
bus_teardown_intr(dev, sc->sc_txdmairq, sc->sc_txihtx);
|
|
bus_teardown_intr(dev, sc->sc_rxdmairq, sc->sc_rxih);
|
|
|
|
dbdma_free_channel(sc->sc_txdma);
|
|
dbdma_free_channel(sc->sc_rxdma);
|
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid, sc->sc_memr);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_txdmarid,
|
|
sc->sc_txdmar);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rxdmarid,
|
|
sc->sc_rxdmar);
|
|
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_txdmairqid,
|
|
sc->sc_txdmairq);
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_rxdmairqid,
|
|
sc->sc_rxdmairq);
|
|
|
|
mtx_destroy(&sc->sc_mtx);
|
|
if_free(sc->sc_ifp);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bm_shutdown(device_t dev)
|
|
{
|
|
struct bm_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
BM_LOCK(sc);
|
|
bm_stop(sc);
|
|
BM_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bm_dummypacket(struct bm_softc *sc)
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = sc->sc_ifp;
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
|
|
if (m == NULL)
|
|
return;
|
|
|
|
bcopy(sc->sc_enaddr,
|
|
mtod(m, struct ether_header *)->ether_dhost, ETHER_ADDR_LEN);
|
|
bcopy(sc->sc_enaddr,
|
|
mtod(m, struct ether_header *)->ether_shost, ETHER_ADDR_LEN);
|
|
mtod(m, struct ether_header *)->ether_type = htons(3);
|
|
mtod(m, unsigned char *)[14] = 0;
|
|
mtod(m, unsigned char *)[15] = 0;
|
|
mtod(m, unsigned char *)[16] = 0xE3;
|
|
m->m_len = m->m_pkthdr.len = sizeof(struct ether_header) + 3;
|
|
IF_ENQUEUE(&ifp->if_snd, m);
|
|
bm_start_locked(ifp);
|
|
}
|
|
|
|
static void
|
|
bm_rxintr(void *xsc)
|
|
{
|
|
struct bm_softc *sc = xsc;
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
struct mbuf *m;
|
|
int i, prev_stop, new_stop;
|
|
uint16_t status;
|
|
|
|
BM_LOCK(sc);
|
|
|
|
status = dbdma_get_chan_status(sc->sc_rxdma);
|
|
if (status & DBDMA_STATUS_DEAD) {
|
|
dbdma_reset(sc->sc_rxdma);
|
|
BM_UNLOCK(sc);
|
|
return;
|
|
}
|
|
if (!(status & DBDMA_STATUS_RUN)) {
|
|
device_printf(sc->sc_dev,"Bad RX Interrupt!\n");
|
|
BM_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
prev_stop = sc->next_rxdma_slot - 1;
|
|
if (prev_stop < 0)
|
|
prev_stop = sc->rxdma_loop_slot - 1;
|
|
|
|
if (prev_stop < 0) {
|
|
BM_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
new_stop = -1;
|
|
dbdma_sync_commands(sc->sc_rxdma, BUS_DMASYNC_POSTREAD);
|
|
|
|
for (i = sc->next_rxdma_slot; i < BM_MAX_RX_PACKETS; i++) {
|
|
if (i == sc->rxdma_loop_slot)
|
|
i = 0;
|
|
|
|
if (i == prev_stop)
|
|
break;
|
|
|
|
status = dbdma_get_cmd_status(sc->sc_rxdma, i);
|
|
|
|
if (status == 0)
|
|
break;
|
|
|
|
m = sc->sc_rxsoft[i].rxs_mbuf;
|
|
|
|
if (bm_add_rxbuf(sc, i)) {
|
|
ifp->if_ierrors++;
|
|
m = NULL;
|
|
continue;
|
|
}
|
|
|
|
if (m == NULL)
|
|
continue;
|
|
|
|
ifp->if_ipackets++;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_len -= (dbdma_get_residuals(sc->sc_rxdma, i) + 2);
|
|
m->m_pkthdr.len = m->m_len;
|
|
|
|
/* Send up the stack */
|
|
BM_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
BM_LOCK(sc);
|
|
|
|
/* Clear all fields on this command */
|
|
bm_add_rxbuf_dma(sc, i);
|
|
|
|
new_stop = i;
|
|
}
|
|
|
|
/* Change the last packet we processed to the ring buffer terminator,
|
|
* and restore a receive buffer to the old terminator */
|
|
if (new_stop >= 0) {
|
|
dbdma_insert_stop(sc->sc_rxdma, new_stop);
|
|
bm_add_rxbuf_dma(sc, prev_stop);
|
|
if (i < sc->rxdma_loop_slot)
|
|
sc->next_rxdma_slot = i;
|
|
else
|
|
sc->next_rxdma_slot = 0;
|
|
}
|
|
dbdma_sync_commands(sc->sc_rxdma, BUS_DMASYNC_PREWRITE);
|
|
|
|
dbdma_wake(sc->sc_rxdma);
|
|
|
|
BM_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bm_txintr(void *xsc)
|
|
{
|
|
struct bm_softc *sc = xsc;
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
struct bm_txsoft *txs;
|
|
int progress = 0;
|
|
|
|
BM_LOCK(sc);
|
|
|
|
while ((txs = STAILQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
if (!dbdma_get_cmd_status(sc->sc_txdma, txs->txs_lastdesc))
|
|
break;
|
|
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
bus_dmamap_unload(sc->sc_tdma_tag, txs->txs_dmamap);
|
|
|
|
if (txs->txs_mbuf != NULL) {
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
|
|
/* Set the first used TXDMA slot to the location of the
|
|
* STOP/NOP command associated with this packet. */
|
|
|
|
sc->first_used_txdma_slot = txs->txs_stopdesc;
|
|
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
|
|
ifp->if_opackets++;
|
|
progress = 1;
|
|
}
|
|
|
|
if (progress) {
|
|
/*
|
|
* We freed some descriptors, so reset IFF_DRV_OACTIVE
|
|
* and restart.
|
|
*/
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
sc->sc_wdog_timer = STAILQ_EMPTY(&sc->sc_txdirtyq) ? 0 : 5;
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) &&
|
|
!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
bm_start_locked(ifp);
|
|
}
|
|
|
|
BM_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bm_start(struct ifnet *ifp)
|
|
{
|
|
struct bm_softc *sc = ifp->if_softc;
|
|
|
|
BM_LOCK(sc);
|
|
bm_start_locked(ifp);
|
|
BM_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bm_start_locked(struct ifnet *ifp)
|
|
{
|
|
struct bm_softc *sc = ifp->if_softc;
|
|
struct mbuf *mb_head;
|
|
int prev_stop;
|
|
int txqueued = 0;
|
|
|
|
/*
|
|
* We lay out our DBDMA program in the following manner:
|
|
* OUTPUT_MORE
|
|
* ...
|
|
* OUTPUT_LAST (+ Interrupt)
|
|
* STOP
|
|
*
|
|
* To extend the channel, we append a new program,
|
|
* then replace STOP with NOP and wake the channel.
|
|
* If we stalled on the STOP already, the program proceeds,
|
|
* if not it will sail through the NOP.
|
|
*/
|
|
|
|
while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, mb_head);
|
|
|
|
if (mb_head == NULL)
|
|
break;
|
|
|
|
prev_stop = sc->next_txdma_slot - 1;
|
|
|
|
if (bm_encap(sc, &mb_head)) {
|
|
/* Put the packet back and stop */
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, mb_head);
|
|
break;
|
|
}
|
|
|
|
dbdma_insert_nop(sc->sc_txdma, prev_stop);
|
|
|
|
txqueued = 1;
|
|
|
|
BPF_MTAP(ifp, mb_head);
|
|
}
|
|
|
|
dbdma_sync_commands(sc->sc_txdma, BUS_DMASYNC_PREWRITE);
|
|
|
|
if (txqueued) {
|
|
dbdma_wake(sc->sc_txdma);
|
|
sc->sc_wdog_timer = 5;
|
|
}
|
|
}
|
|
|
|
static int
|
|
bm_encap(struct bm_softc *sc, struct mbuf **m_head)
|
|
{
|
|
bus_dma_segment_t segs[BM_NTXSEGS];
|
|
struct bm_txsoft *txs;
|
|
struct mbuf *m;
|
|
int nsegs = BM_NTXSEGS;
|
|
int error = 0;
|
|
uint8_t branch_type;
|
|
int i;
|
|
|
|
/* Limit the command size to the number of free DBDMA slots */
|
|
|
|
if (sc->next_txdma_slot >= sc->first_used_txdma_slot)
|
|
nsegs = BM_MAX_DMA_COMMANDS - 2 - sc->next_txdma_slot +
|
|
sc->first_used_txdma_slot; /* -2 for branch and indexing */
|
|
else
|
|
nsegs = sc->first_used_txdma_slot - sc->next_txdma_slot;
|
|
|
|
/* Remove one slot for the STOP/NOP terminator */
|
|
nsegs--;
|
|
|
|
if (nsegs > BM_NTXSEGS)
|
|
nsegs = BM_NTXSEGS;
|
|
|
|
/* Get a work queue entry. */
|
|
if ((txs = STAILQ_FIRST(&sc->sc_txfreeq)) == NULL) {
|
|
/* Ran out of descriptors. */
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->sc_tdma_tag, txs->txs_dmamap,
|
|
*m_head, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == EFBIG) {
|
|
m = m_collapse(*m_head, M_DONTWAIT, nsegs);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->sc_tdma_tag,
|
|
txs->txs_dmamap, *m_head, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error != 0)
|
|
return (error);
|
|
|
|
if (nsegs == 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (EIO);
|
|
}
|
|
|
|
txs->txs_ndescs = nsegs;
|
|
txs->txs_firstdesc = sc->next_txdma_slot;
|
|
|
|
for (i = 0; i < nsegs; i++) {
|
|
/* Loop back to the beginning if this is our last slot */
|
|
if (sc->next_txdma_slot == (BM_MAX_DMA_COMMANDS - 1))
|
|
branch_type = DBDMA_ALWAYS;
|
|
else
|
|
branch_type = DBDMA_NEVER;
|
|
|
|
if (i+1 == nsegs)
|
|
txs->txs_lastdesc = sc->next_txdma_slot;
|
|
|
|
dbdma_insert_command(sc->sc_txdma, sc->next_txdma_slot++,
|
|
(i + 1 < nsegs) ? DBDMA_OUTPUT_MORE : DBDMA_OUTPUT_LAST,
|
|
0, segs[i].ds_addr, segs[i].ds_len,
|
|
(i + 1 < nsegs) ? DBDMA_NEVER : DBDMA_ALWAYS,
|
|
branch_type, DBDMA_NEVER, 0);
|
|
|
|
if (branch_type == DBDMA_ALWAYS)
|
|
sc->next_txdma_slot = 0;
|
|
}
|
|
|
|
/* We have a corner case where the STOP command is the last slot,
|
|
* but you can't branch in STOP commands. So add a NOP branch here
|
|
* and the STOP in slot 0. */
|
|
|
|
if (sc->next_txdma_slot == (BM_MAX_DMA_COMMANDS - 1)) {
|
|
dbdma_insert_branch(sc->sc_txdma, sc->next_txdma_slot, 0);
|
|
sc->next_txdma_slot = 0;
|
|
}
|
|
|
|
txs->txs_stopdesc = sc->next_txdma_slot;
|
|
dbdma_insert_stop(sc->sc_txdma, sc->next_txdma_slot++);
|
|
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q);
|
|
STAILQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q);
|
|
txs->txs_mbuf = *m_head;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bm_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct bm_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int error;
|
|
|
|
error = 0;
|
|
|
|
switch(cmd) {
|
|
case SIOCSIFFLAGS:
|
|
BM_LOCK(sc);
|
|
if ((ifp->if_flags & IFF_UP) != 0) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0 &&
|
|
((ifp->if_flags ^ sc->sc_ifpflags) &
|
|
(IFF_ALLMULTI | IFF_PROMISC)) != 0)
|
|
bm_setladrf(sc);
|
|
else
|
|
bm_init_locked(sc);
|
|
} else if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
bm_stop(sc);
|
|
sc->sc_ifpflags = ifp->if_flags;
|
|
BM_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
BM_LOCK(sc);
|
|
bm_setladrf(sc);
|
|
BM_UNLOCK(sc);
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii->mii_media, cmd);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
bm_setladrf(struct bm_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
struct ifmultiaddr *inm;
|
|
uint16_t hash[4];
|
|
uint16_t reg;
|
|
uint32_t crc;
|
|
|
|
reg = BM_CRC_ENABLE | BM_REJECT_OWN_PKTS;
|
|
|
|
/* Turn off RX MAC while we fiddle its settings */
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
while (CSR_READ_2(sc, BM_RX_CONFIG) & BM_ENABLE)
|
|
DELAY(10);
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0) {
|
|
reg |= BM_PROMISC;
|
|
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
|
|
DELAY(15);
|
|
|
|
reg = CSR_READ_2(sc, BM_RX_CONFIG);
|
|
reg |= BM_ENABLE;
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
return;
|
|
}
|
|
|
|
if ((ifp->if_flags & IFF_ALLMULTI) != 0) {
|
|
hash[3] = hash[2] = hash[1] = hash[0] = 0xffff;
|
|
} else {
|
|
/* Clear the hash table. */
|
|
memset(hash, 0, sizeof(hash));
|
|
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(inm, &ifp->if_multiaddrs, ifma_link) {
|
|
if (inm->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
crc = ether_crc32_le(LLADDR((struct sockaddr_dl *)
|
|
inm->ifma_addr), ETHER_ADDR_LEN);
|
|
|
|
/* We just want the 6 most significant bits */
|
|
crc >>= 26;
|
|
|
|
/* Set the corresponding bit in the filter. */
|
|
hash[crc >> 4] |= 1 << (crc & 0xf);
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
}
|
|
|
|
/* Write out new hash table */
|
|
CSR_WRITE_2(sc, BM_HASHTAB0, hash[0]);
|
|
CSR_WRITE_2(sc, BM_HASHTAB1, hash[1]);
|
|
CSR_WRITE_2(sc, BM_HASHTAB2, hash[2]);
|
|
CSR_WRITE_2(sc, BM_HASHTAB3, hash[3]);
|
|
|
|
/* And turn the RX MAC back on, this time with the hash bit set */
|
|
reg |= BM_HASH_FILTER_ENABLE;
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
|
|
while (!(CSR_READ_2(sc, BM_RX_CONFIG) & BM_HASH_FILTER_ENABLE))
|
|
DELAY(10);
|
|
|
|
reg = CSR_READ_2(sc, BM_RX_CONFIG);
|
|
reg |= BM_ENABLE;
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
}
|
|
|
|
static void
|
|
bm_init(void *xsc)
|
|
{
|
|
struct bm_softc *sc = xsc;
|
|
|
|
BM_LOCK(sc);
|
|
bm_init_locked(sc);
|
|
BM_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bm_chip_setup(struct bm_softc *sc)
|
|
{
|
|
uint16_t reg;
|
|
uint16_t *eaddr_sect;
|
|
struct mii_data *mii;
|
|
struct mii_softc *miisc;
|
|
|
|
eaddr_sect = (uint16_t *)(sc->sc_enaddr);
|
|
dbdma_stop(sc->sc_txdma);
|
|
dbdma_stop(sc->sc_rxdma);
|
|
|
|
/* Reset MII */
|
|
mii = device_get_softc(sc->sc_miibus);
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list) {
|
|
PHY_RESET(miisc);
|
|
PHY_WRITE(miisc, MII_BMCR, PHY_READ(miisc, MII_BMCR) &
|
|
~BMCR_ISO);
|
|
}
|
|
|
|
/* Reset chip */
|
|
CSR_WRITE_2(sc, BM_RX_RESET, 0x0000);
|
|
CSR_WRITE_2(sc, BM_TX_RESET, 0x0001);
|
|
do {
|
|
DELAY(10);
|
|
reg = CSR_READ_2(sc, BM_TX_RESET);
|
|
} while (reg & 0x0001);
|
|
|
|
/* Some random junk. OS X uses the system time. We use
|
|
* the low 16 bits of the MAC address. */
|
|
CSR_WRITE_2(sc, BM_TX_RANDSEED, eaddr_sect[2]);
|
|
|
|
/* Enable transmit */
|
|
reg = CSR_READ_2(sc, BM_TX_IFC);
|
|
reg |= BM_ENABLE;
|
|
CSR_WRITE_2(sc, BM_TX_IFC, reg);
|
|
|
|
CSR_READ_2(sc, BM_TX_PEAKCNT);
|
|
}
|
|
|
|
static void
|
|
bm_stop(struct bm_softc *sc)
|
|
{
|
|
struct bm_txsoft *txs;
|
|
uint16_t reg;
|
|
|
|
/* Disable TX and RX MACs */
|
|
reg = CSR_READ_2(sc, BM_TX_CONFIG);
|
|
reg &= ~BM_ENABLE;
|
|
CSR_WRITE_2(sc, BM_TX_CONFIG, reg);
|
|
|
|
reg = CSR_READ_2(sc, BM_RX_CONFIG);
|
|
reg &= ~BM_ENABLE;
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
|
|
DELAY(100);
|
|
|
|
/* Stop DMA engine */
|
|
dbdma_stop(sc->sc_rxdma);
|
|
dbdma_stop(sc->sc_txdma);
|
|
sc->next_rxdma_slot = 0;
|
|
sc->rxdma_loop_slot = 0;
|
|
|
|
/* Disable interrupts */
|
|
bm_disable_interrupts(sc);
|
|
|
|
/* Don't worry about pending transmits anymore */
|
|
while ((txs = STAILQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
if (txs->txs_ndescs != 0) {
|
|
bus_dmamap_sync(sc->sc_tdma_tag, txs->txs_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_tdma_tag, txs->txs_dmamap);
|
|
if (txs->txs_mbuf != NULL) {
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
/* And we're down */
|
|
sc->sc_ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
sc->sc_wdog_timer = 0;
|
|
callout_stop(&sc->sc_tick_ch);
|
|
}
|
|
|
|
static void
|
|
bm_init_locked(struct bm_softc *sc)
|
|
{
|
|
uint16_t reg;
|
|
uint16_t *eaddr_sect;
|
|
struct bm_rxsoft *rxs;
|
|
int i;
|
|
|
|
eaddr_sect = (uint16_t *)(sc->sc_enaddr);
|
|
|
|
/* Zero RX slot info and stop DMA */
|
|
dbdma_stop(sc->sc_rxdma);
|
|
dbdma_stop(sc->sc_txdma);
|
|
sc->next_rxdma_slot = 0;
|
|
sc->rxdma_loop_slot = 0;
|
|
|
|
/* Initialize TX/RX DBDMA programs */
|
|
dbdma_insert_stop(sc->sc_rxdma, 0);
|
|
dbdma_insert_stop(sc->sc_txdma, 0);
|
|
dbdma_set_current_cmd(sc->sc_rxdma, 0);
|
|
dbdma_set_current_cmd(sc->sc_txdma, 0);
|
|
|
|
sc->next_rxdma_slot = 0;
|
|
sc->next_txdma_slot = 1;
|
|
sc->first_used_txdma_slot = 0;
|
|
|
|
for (i = 0; i < BM_MAX_RX_PACKETS; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
rxs->dbdma_slot = i;
|
|
|
|
if (rxs->rxs_mbuf == NULL) {
|
|
bm_add_rxbuf(sc, i);
|
|
|
|
if (rxs->rxs_mbuf == NULL) {
|
|
/* If we can't add anymore, mark the problem */
|
|
rxs->dbdma_slot = -1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i > 0)
|
|
bm_add_rxbuf_dma(sc, i);
|
|
}
|
|
|
|
/*
|
|
* Now terminate the RX ring buffer, and follow with the loop to
|
|
* the beginning.
|
|
*/
|
|
dbdma_insert_stop(sc->sc_rxdma, i - 1);
|
|
dbdma_insert_branch(sc->sc_rxdma, i, 0);
|
|
sc->rxdma_loop_slot = i;
|
|
|
|
/* Now add in the first element of the RX DMA chain */
|
|
bm_add_rxbuf_dma(sc, 0);
|
|
|
|
dbdma_sync_commands(sc->sc_rxdma, BUS_DMASYNC_PREWRITE);
|
|
dbdma_sync_commands(sc->sc_txdma, BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Zero collision counters */
|
|
CSR_WRITE_2(sc, BM_TX_NCCNT, 0);
|
|
CSR_WRITE_2(sc, BM_TX_FCCNT, 0);
|
|
CSR_WRITE_2(sc, BM_TX_EXCNT, 0);
|
|
CSR_WRITE_2(sc, BM_TX_LTCNT, 0);
|
|
|
|
/* Zero receive counters */
|
|
CSR_WRITE_2(sc, BM_RX_FRCNT, 0);
|
|
CSR_WRITE_2(sc, BM_RX_LECNT, 0);
|
|
CSR_WRITE_2(sc, BM_RX_AECNT, 0);
|
|
CSR_WRITE_2(sc, BM_RX_FECNT, 0);
|
|
CSR_WRITE_2(sc, BM_RXCV, 0);
|
|
|
|
/* Prime transmit */
|
|
CSR_WRITE_2(sc, BM_TX_THRESH, 0xff);
|
|
|
|
CSR_WRITE_2(sc, BM_TXFIFO_CSR, 0);
|
|
CSR_WRITE_2(sc, BM_TXFIFO_CSR, 0x0001);
|
|
|
|
/* Prime receive */
|
|
CSR_WRITE_2(sc, BM_RXFIFO_CSR, 0);
|
|
CSR_WRITE_2(sc, BM_RXFIFO_CSR, 0x0001);
|
|
|
|
/* Clear status reg */
|
|
CSR_READ_2(sc, BM_STATUS);
|
|
|
|
/* Zero hash filters */
|
|
CSR_WRITE_2(sc, BM_HASHTAB0, 0);
|
|
CSR_WRITE_2(sc, BM_HASHTAB1, 0);
|
|
CSR_WRITE_2(sc, BM_HASHTAB2, 0);
|
|
CSR_WRITE_2(sc, BM_HASHTAB3, 0);
|
|
|
|
/* Write MAC address to chip */
|
|
CSR_WRITE_2(sc, BM_MACADDR0, eaddr_sect[0]);
|
|
CSR_WRITE_2(sc, BM_MACADDR1, eaddr_sect[1]);
|
|
CSR_WRITE_2(sc, BM_MACADDR2, eaddr_sect[2]);
|
|
|
|
/* Final receive engine setup */
|
|
reg = BM_CRC_ENABLE | BM_REJECT_OWN_PKTS | BM_HASH_FILTER_ENABLE;
|
|
CSR_WRITE_2(sc, BM_RX_CONFIG, reg);
|
|
|
|
/* Now turn it all on! */
|
|
dbdma_reset(sc->sc_rxdma);
|
|
dbdma_reset(sc->sc_txdma);
|
|
|
|
/* Enable RX and TX MACs. Setting the address filter has
|
|
* the side effect of enabling the RX MAC. */
|
|
bm_setladrf(sc);
|
|
|
|
reg = CSR_READ_2(sc, BM_TX_CONFIG);
|
|
reg |= BM_ENABLE;
|
|
CSR_WRITE_2(sc, BM_TX_CONFIG, reg);
|
|
|
|
/*
|
|
* Enable interrupts, unwedge the controller with a dummy packet,
|
|
* and nudge the DMA queue.
|
|
*/
|
|
bm_enable_interrupts(sc);
|
|
bm_dummypacket(sc);
|
|
dbdma_wake(sc->sc_rxdma); /* Nudge RXDMA */
|
|
|
|
sc->sc_ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
sc->sc_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
sc->sc_ifpflags = sc->sc_ifp->if_flags;
|
|
|
|
/* Resync PHY and MAC states */
|
|
sc->sc_mii = device_get_softc(sc->sc_miibus);
|
|
sc->sc_duplex = ~IFM_FDX;
|
|
mii_mediachg(sc->sc_mii);
|
|
|
|
/* Start the one second timer. */
|
|
sc->sc_wdog_timer = 0;
|
|
callout_reset(&sc->sc_tick_ch, hz, bm_tick, sc);
|
|
}
|
|
|
|
static void
|
|
bm_tick(void *arg)
|
|
{
|
|
struct bm_softc *sc = arg;
|
|
|
|
/* Read error counters */
|
|
sc->sc_ifp->if_collisions += CSR_READ_2(sc, BM_TX_NCCNT) +
|
|
CSR_READ_2(sc, BM_TX_FCCNT) + CSR_READ_2(sc, BM_TX_EXCNT) +
|
|
CSR_READ_2(sc, BM_TX_LTCNT);
|
|
|
|
sc->sc_ifp->if_ierrors += CSR_READ_2(sc, BM_RX_LECNT) +
|
|
CSR_READ_2(sc, BM_RX_AECNT) + CSR_READ_2(sc, BM_RX_FECNT);
|
|
|
|
/* Zero collision counters */
|
|
CSR_WRITE_2(sc, BM_TX_NCCNT, 0);
|
|
CSR_WRITE_2(sc, BM_TX_FCCNT, 0);
|
|
CSR_WRITE_2(sc, BM_TX_EXCNT, 0);
|
|
CSR_WRITE_2(sc, BM_TX_LTCNT, 0);
|
|
|
|
/* Zero receive counters */
|
|
CSR_WRITE_2(sc, BM_RX_FRCNT, 0);
|
|
CSR_WRITE_2(sc, BM_RX_LECNT, 0);
|
|
CSR_WRITE_2(sc, BM_RX_AECNT, 0);
|
|
CSR_WRITE_2(sc, BM_RX_FECNT, 0);
|
|
CSR_WRITE_2(sc, BM_RXCV, 0);
|
|
|
|
/* Check for link changes and run watchdog */
|
|
mii_tick(sc->sc_mii);
|
|
bm_miibus_statchg(sc->sc_dev);
|
|
|
|
if (sc->sc_wdog_timer == 0 || --sc->sc_wdog_timer != 0) {
|
|
callout_reset(&sc->sc_tick_ch, hz, bm_tick, sc);
|
|
return;
|
|
}
|
|
|
|
/* Problems */
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
|
|
bm_init_locked(sc);
|
|
}
|
|
|
|
static int
|
|
bm_add_rxbuf(struct bm_softc *sc, int idx)
|
|
{
|
|
struct bm_rxsoft *rxs = &sc->sc_rxsoft[idx];
|
|
struct mbuf *m;
|
|
bus_dma_segment_t segs[1];
|
|
int error, nsegs;
|
|
|
|
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = m->m_ext.ext_size;
|
|
|
|
if (rxs->rxs_mbuf != NULL) {
|
|
bus_dmamap_sync(sc->sc_rdma_tag, rxs->rxs_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->sc_rdma_tag, rxs->rxs_dmamap);
|
|
}
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->sc_rdma_tag, rxs->rxs_dmamap, m,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"cannot load RS DMA map %d, error = %d\n", idx, error);
|
|
m_freem(m);
|
|
return (error);
|
|
}
|
|
/* If nsegs is wrong then the stack is corrupt. */
|
|
KASSERT(nsegs == 1,
|
|
("%s: too many DMA segments (%d)", __func__, nsegs));
|
|
rxs->rxs_mbuf = m;
|
|
rxs->segment = segs[0];
|
|
|
|
bus_dmamap_sync(sc->sc_rdma_tag, rxs->rxs_dmamap, BUS_DMASYNC_PREREAD);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bm_add_rxbuf_dma(struct bm_softc *sc, int idx)
|
|
{
|
|
struct bm_rxsoft *rxs = &sc->sc_rxsoft[idx];
|
|
|
|
dbdma_insert_command(sc->sc_rxdma, idx, DBDMA_INPUT_LAST, 0,
|
|
rxs->segment.ds_addr, rxs->segment.ds_len, DBDMA_ALWAYS,
|
|
DBDMA_NEVER, DBDMA_NEVER, 0);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bm_enable_interrupts(struct bm_softc *sc)
|
|
{
|
|
CSR_WRITE_2(sc, BM_INTR_DISABLE,
|
|
(sc->sc_streaming) ? BM_INTR_NONE : BM_INTR_NORMAL);
|
|
}
|
|
|
|
static void
|
|
bm_disable_interrupts(struct bm_softc *sc)
|
|
{
|
|
CSR_WRITE_2(sc, BM_INTR_DISABLE, BM_INTR_NONE);
|
|
}
|