d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/dev
History
Gleb Smirnoff 7c007dd329 Merge new vendor release - 6.2.9. 
Details:
o if_em.c changes:
  - Added several new PCI ids.
  - Check em_check_phy_reset_block() before doing SIOCSIFMEDIA ioctl.
  - Don't touch TARC registers, they are now handled in shared
    code in if_em_hw.c.
  - Move RDH and RDT setting to the end of
    em_initialize_receive_unit().
  - Declare em_read_pcie_cap_reg(), now empty.
o if_em_hw.c dropped in from vendor, then restored rev. 1.15.
o if_em_hw.h dropped in from vendor, then modified:
  - Added RX overrun interrupt flag to interrupt enable mask.
  - Remove declarations of em_io_read(), em_io_write().

Approved by:	jfv
2006-10-31 15:00:14 +00:00
..
aac
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
acpi_support
Driver for some ASUS desktop motherboard extras.
2006-10-30 05:38:48 +00:00
acpica
Disable an overly-verbose warning message by default.
2006-09-24 09:39:17 +00:00
adlink
…
advansys
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
agp
The page queues lock is no longer required by vm_page_busy() or
2006-10-22 21:18:48 +00:00
aha
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
ahb
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
aic
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
aic7xxx
Coverity: initialize some variables before potential use.
2006-09-05 20:28:28 +00:00
amd
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
amr
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
an
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
ar
- Use bus_setup_intr() and bus_teardown_intr() to register device driver
2006-02-22 18:16:26 +00:00
arcmsr
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
arl
while (0); -> while (0) in multi-line macros
2006-08-17 22:50:33 +00:00
asr
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
ata
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
ath
correct diag request to fetch isr state on fatal interrupts
2006-10-09 23:45:26 +00:00
atkbdc
Fix LEDs not working when atkbd is an active keyboard and the physical
2006-10-25 13:35:42 +00:00
auxio
- Only touch the LED bit of the (LED) AUXIO register when turning the
2006-01-26 19:04:18 +00:00
awi
tweak comment
2006-10-19 05:25:29 +00:00
bce
Fix a typo in the device ID table that prevented 5708S chips from being
2006-10-31 03:28:25 +00:00
bfe
Back out the BUS_DMA_ALLOCNOW change from rev 1.39. Scottl informed me that
2006-05-28 20:35:39 +00:00
bge
There is no reason to have a PAGE_SIZE alignment enforced on all DMA by the
2006-10-19 08:03:22 +00:00
bktr
Update prototype for smbus callback change.
2006-09-18 20:17:42 +00:00
buslogic
…
cardbus
Minor cleanup of CIS parsing.
2006-06-12 03:28:42 +00:00
ce
Update low-level code. (to version 1.4)
2006-03-01 09:50:20 +00:00
ciss
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
cm
Make cm(4) driver MPSAFE.
2006-06-11 22:25:01 +00:00
cnw
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
cp
trim trailing ^I
2005-12-17 07:09:17 +00:00
cpufreq
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
cs
- Consistently use if_printf() only in interface methods: if_start(),
2006-09-15 15:16:12 +00:00
ct
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
ctau
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
cx
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
cy
Catch up with new interrupt handling code.
2005-10-26 06:44:59 +00:00
dc
- Wrap code optimized for architectures without alignment constraints
2006-10-29 20:24:27 +00:00
dcons
Convert to new console interface.
2006-05-26 13:51:38 +00:00
de
- Consistently use if_printf() only in interface methods: if_start(),
2006-09-15 15:16:12 +00:00
digi
Fix our ioctl(2) implementation when the argument is "int". New
2006-09-27 19:57:02 +00:00
dpt
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
drm
Merge from DRM upstream:
2006-09-07 23:04:47 +00:00
ed
MFp4:
2006-06-12 04:30:42 +00:00
eisa
…
em
Merge new vendor release - 6.2.9.
2006-10-31 15:00:14 +00:00
en
- Consistently use if_printf() only in interface methods: if_start(),
2006-09-15 15:16:12 +00:00
ep
Remove ifdef notdef SIOCHWADDR vestige.
2006-02-04 08:16:07 +00:00
esp
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
ex
Remove ifdef notyet SIOCGHWADDR vestige.
2006-02-04 08:16:41 +00:00
exca
Cleanup sloppy ifdef.
2006-09-24 00:26:33 +00:00
fatm
This driver has been MPSAFE from the beginning so declare the interrupt
2006-03-21 14:56:42 +00:00
fb
Remove the DPMS code in creator_blank_display(), as it causes some
2006-08-24 22:00:24 +00:00
fdc
Fix style nits. No md5 changes in .o's. ;-)
2006-09-08 21:46:01 +00:00
fe
Commit the results of the typo hunt by Darren Pilgrim.
2006-08-04 07:56:35 +00:00
firewire
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
fxp
fix fxp so that it will reset the link when you change the speed... This
2006-10-06 20:53:01 +00:00
gem
add a newbus method for obtaining the bus's bus_dma_tag_t... This is
2006-09-03 00:27:42 +00:00
gfb
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
harp
…
hatm
…
hfa
…
hifn
Use newly added functions to simplify the code.
2006-06-04 22:17:25 +00:00
hme
Fix invalid reference of mbuf chains.
2006-08-12 01:19:37 +00:00
hptmv
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
hwpmc
Declare security and security.bsd sysctl hierarchies in sysctl.h along
2006-09-17 20:00:36 +00:00
ic
Fix style nits. No md5 changes in .o's. ;-)
2006-09-08 21:46:01 +00:00
ichsmb
Minor overhaul of SMBus support:
2006-09-11 20:52:41 +00:00
ichwd
Re-work the bus attachment somewhat. Make the rids unique for
2006-02-17 18:46:18 +00:00
ida
…
idt
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
ie
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
ieee488
Don't be noisy in case of shared interrupts.
2006-03-11 15:39:22 +00:00
if_ndis
Static -> static.
2006-09-07 06:00:03 +00:00
iicbus
Minor overhaul of SMBus support:
2006-09-11 20:52:41 +00:00
iir
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
io
…
ipmi
ipmi_polled_enqueue_request() is already called with the lock held, just
2006-10-12 16:26:42 +00:00
ips
o Add Adaptec ServeRAID 7x IDs. IDs taken from Linux.
2006-10-05 07:28:43 +00:00
ipw
Hold on to firmware images until the interface detaches since
2006-06-10 17:29:40 +00:00
isp
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
ispfw
Add QLogic 2400 (4Gb) firmware.
2006-08-26 18:39:18 +00:00
iwi
net80211 seems to give us more rates than specified via ic_sup_rates under
2006-10-23 00:34:07 +00:00
ixgb
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
joy
Unbreak second joystick (joy1) support.
2005-11-09 20:26:00 +00:00
kbd
Integrate kbdmux(4) into syscons(4) and kbd code.
2006-02-28 23:46:23 +00:00
kbdmux
Fix our ioctl(2) implementation when the argument is "int". New
2006-09-27 19:57:02 +00:00
le
Revert the part of rev. 1.3 which changed the software style to be
2006-06-05 15:14:14 +00:00
led
…
lge
- Consistently use if_printf() only in interface methods: if_start(),
2006-09-15 15:16:12 +00:00
lmc
The contents pointed by ssi_cables[] is never changed so explicitly
2006-07-21 08:45:00 +00:00
mc146818
…
mca
…
mcd
…
md
- Conditionally acquire Giant in mdstart_vnode(), mdcreate_vnode(), and
2006-03-28 21:25:11 +00:00
mem
…
mfi
Remove some debugging code that accidentally crept in.
2006-10-16 04:30:09 +00:00
mii
Add PHY support for BCM5752.
2006-08-31 11:15:18 +00:00
mk48txx
Fix spelling in a status message.
2006-09-01 20:14:06 +00:00
mlx
…
mly
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
mmc
Preliminary MMC stack. This stack supports SD 1.0 cards only, but
2006-10-20 06:39:59 +00:00
mpt
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
mse
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
mxge
Fix a driver bug which could result in frames MHLEN or (MHLEN - 1) bytes
2006-10-17 14:39:19 +00:00
my
- Consistently use if_printf() only in interface methods: if_start(),
2006-09-15 15:16:12 +00:00
ncv
no need to print unload anymore
2006-07-14 04:36:57 +00:00
nfe
style(9)
2006-10-19 10:04:46 +00:00
nge
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
nmdm
Use ttyalloc() instead of ttymalloc()
2006-01-04 08:34:23 +00:00
nsp
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
null
…
nve
ALTQ-ify nve(4).
2006-05-20 21:08:09 +00:00
ofw
Using the ptr defines broke the powerpc build - convert set_mmfsa to the same
2006-10-11 02:52:46 +00:00
patm
Commit the results of the typo hunt by Darren Pilgrim.
2006-08-04 07:56:35 +00:00
pbio
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
pccard
Thomas Wintergerst reports that when this tsleep went away, certain
2006-08-09 00:05:54 +00:00
pccbb
Batch of changes:
2006-08-12 09:06:55 +00:00
pcf
- Use bus_setup_intr() and bus_teardown_intr() to register device driver
2006-02-22 18:16:26 +00:00
pci
Assign start to the value we were able to allocate and use that to
2006-10-30 22:46:33 +00:00
pdq
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
powermac_nvram
Add device to access and modify Open Firmware NVRAM settings in
2006-08-01 22:19:01 +00:00
ppbus
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
ppc
Remove various bits of conditional Alpha code and fixup a few comments.
2006-05-12 05:04:46 +00:00
pst
…
puc
Add SIIG 4 port serial card based on the Oxford OX16PCI954.
2006-09-04 18:27:14 +00:00
ral
remove unnecessary null ptr check
2006-08-02 04:54:14 +00:00
random
Now even more style(9)ish.
2006-07-13 11:47:36 +00:00
ray
tweak comments about OLDCARD workarounds
2006-10-19 05:25:53 +00:00
rc
- Use swi_remove() to teardown swi handlers rather than
2005-10-26 15:52:16 +00:00
re
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
rndtest
…
rp
The UPCI 32 rp(4) card uses BAR 2 like the UPCI 80 card.
2006-01-25 14:55:11 +00:00
rr232x
Make this compile with -Wundef.
2006-05-16 15:23:27 +00:00
safe
Use newly added functions to simplify the code.
2006-06-04 22:17:25 +00:00
sbni
- Store pointer to the link-level address right in "struct ifnet"
2005-11-11 16:04:59 +00:00
sbsh
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
scc
Fix braino: The cl_range field should not hold the shifted I/O
2006-07-26 03:10:01 +00:00
scd
…
sf
Whitespace nits.
2006-09-15 11:01:23 +00:00
si
- Update copyright years from the Specialix SDK.
2006-01-06 20:17:48 +00:00
sio
Only treat positive values as errors...
2006-09-14 03:47:59 +00:00
sk
provide routines to access VPD data at the PCI layer...
2006-10-09 16:15:56 +00:00
smbus
Only support the SMB_OLD_BREAD ioctl if one of COMPAT_FREEBSD[456] is
2006-09-26 14:38:56 +00:00
sn
Fix mismerge after last cvs update for the IFQ_DRV_DEQUEUE changes.
2006-02-04 08:19:00 +00:00
snc
Fix -Wundef warnings from compiling GENERIC and LINT kernels of
2005-12-06 11:19:37 +00:00
snp
…
sound
MFP4:
2006-10-28 09:51:10 +00:00
speaker
Add /dev/speaker support to amd64.
2005-11-11 09:57:32 +00:00
spibus
MFp4: when passing the transfer up the foodchain, make sure we go up
2006-10-20 07:11:52 +00:00
sr
- Use bus_setup_intr() and bus_teardown_intr() to register device driver
2006-02-22 18:16:26 +00:00
stg
no need to print unload anymore.
2006-07-14 04:35:59 +00:00
stge
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
streams
Clean up the svr4 socket cache and streams code some to make it more easily
2006-07-21 20:40:13 +00:00
sym
Commit the results of the typo hunt by Darren Pilgrim.
2006-08-04 07:56:35 +00:00
syscons
Fix our ioctl(2) implementation when the argument is "int". New
2006-09-27 19:57:02 +00:00
tdfx
Take the functionality contained in the former "options TDFX_LINUX"
2006-03-03 21:37:38 +00:00
ti
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
trm
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
twa
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
twe
Normalize a significant number of kernel malloc type names:
2005-10-31 15:41:29 +00:00
tx
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
txp
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
uart
Fix our ioctl(2) implementation when the argument is "int". New
2006-09-27 19:57:02 +00:00
ubsec
Switch to using STAILQ_REMOVE_HEAD() instead of STAILQ_REMOVE_HEAD_UNTIL().
2006-10-24 11:17:46 +00:00
usb
The first of 3 major steps to move the CAM layer forward to using
2006-10-31 05:53:29 +00:00
utopia
…
vge
Move ethernet VLAN tags from mtags to its own mbuf packet header field
2006-09-17 13:33:30 +00:00
vkbd
Fix our ioctl(2) implementation when the argument is "int". New
2006-09-27 19:57:02 +00:00
vr
Whitespace nits.
2006-09-15 11:01:23 +00:00
vx
- Store pointer to the link-level address right in "struct ifnet"
2005-11-11 16:04:59 +00:00
watchdog
…
wds
Since DELAY() was moved, most <machine/clock.h> #includes have been
2006-05-16 14:37:58 +00:00
wi
raw 802.11 packet transmit support
2006-08-05 04:58:25 +00:00
wl
Trival whitespace change.
2006-06-19 11:30:36 +00:00
xe
o Fix printf(9) formatting: do not use hardcode "0x" and "#" flags
2006-04-15 11:41:40 +00:00
zs
Update to new console api.
2006-05-26 18:25:34 +00:00