freebsd-skq/sys/dev/pccbb/pccbbreg.h
Warner Losh 673c9ca931 Batch of changes:
o when turning off the socket for a 16-bit card, write 0 to INTR register
  rather than just tying to just clear the rest bit.  this seems to fix
  card insert detection after an eject on TI bridges (ricoh bridges work
  either way, apparently).  This is a MFp4.
o Cope better with TOPIC95 bridges on powerup.  According to NetBSD driver,
  these bridges don't set POWER_STATE, so cope accordingly in our power
  code.  They also need a little extra time to settle, so do that as well.
o It appears that we need to turn on/off one of the clocks to the card
  when we power up/down that socket on a TOPIC97, also from NetBSD.
o TOPIC97 bridges need to specifically enable LV card support.  Unconditionally
  do this in the hopes that all laptops that have these chips support LV
  voltages (they should, since they are required for CardBus).
o TOPIC register name regularization.  Registers specific to models of TOPIC
  are now called out as such.

# I need a machine with a TOPIC95 for testing.
2006-08-12 09:06:55 +00:00

263 lines
10 KiB
C

/*-
* Copyright (c) 2000,2001 Jonathan Chen.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Copyright (c) 1998, 1999 and 2000
* HAYAKAWA Koichi. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by HAYAKAWA Koichi.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Register definitions for PCI to Cardbus Bridge chips
*/
/* PCI header registers */
#define CBBR_SOCKBASE 0x10 /* len=4 */
#define CBBR_MEMBASE0 0x1c /* len=4 */
#define CBBR_MEMLIMIT0 0x20 /* len=4 */
#define CBBR_MEMBASE1 0x24 /* len=4 */
#define CBBR_MEMLIMIT1 0x28 /* len=4 */
#define CBBR_IOBASE0 0x2c /* len=4 */
#define CBBR_IOLIMIT0 0x30 /* len=4 */
#define CBBR_IOBASE1 0x34 /* len=4 */
#define CBBR_IOLIMIT1 0x38 /* len=4 */
#define CBB_MEMALIGN 4096
#define CBB_MEMALIGN_BITS 12
#define CBB_IOALIGN 4
#define CBB_IOALIGN_BITS 2
#define CBBR_INTRLINE 0x3c /* len=1 */
#define CBBR_INTRPIN 0x3d /* len=1 */
#define CBBR_BRIDGECTRL 0x3e /* len=2 */
# define CBBM_BRIDGECTRL_MASTER_ABORT 0x0020
# define CBBM_BRIDGECTRL_RESET 0x0040
# define CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN 0x0080
# define CBBM_BRIDGECTRL_PREFETCH_0 0x0100
# define CBBM_BRIDGECTRL_PREFETCH_1 0x0200
# define CBBM_BRIDGECTRL_WRITE_POST_EN 0x0400
/* additional bit for RF5C46[567] */
# define CBBM_BRIDGECTRL_RL_3E0_EN 0x0800
# define CBBM_BRIDGECTRL_RL_3E2_EN 0x1000
#define CBBR_LEGACY 0x44 /* len=4 */
/* TI */
#define CBBR_SYSCTRL 0x80 /* len=4 */
# define CBBM_SYSCTRL_INTRTIE 0x20000000u
/* TI [14][245]xx */
#define CBBR_MMCTRL 0x84 /* len=4 */
/* TI 12xx/14xx/15xx (except 1250/1251/1251B/1450) */
#define CBBR_MFUNC 0x8c /* len=4 */
# define CBBM_MFUNC_PIN0 0x0000000f
# define CBBM_MFUNC_PIN0_INTA 0x02
# define CBBM_MFUNC_PIN1 0x000000f0
# define CBBM_MFUNC_PIN1_INTB 0x20
# define CBBM_MFUNC_PIN2 0x00000f00
# define CBBM_MFUNC_PIN3 0x0000f000
# define CBBM_MFUNC_PIN4 0x000f0000
# define CBBM_MFUNC_PIN5 0x00f00000
# define CBBM_MFUNC_PIN6 0x0f000000
#define CBBR_CBCTRL 0x91 /* len=1 */
/* bits for TI 113X */
# define CBBM_CBCTRL_113X_RI_EN 0x80
# define CBBM_CBCTRL_113X_ZV_EN 0x40
# define CBBM_CBCTRL_113X_PCI_IRQ_EN 0x20
# define CBBM_CBCTRL_113X_PCI_INTR 0x10
# define CBBM_CBCTRL_113X_PCI_CSC 0x08
# define CBBM_CBCTRL_113X_PCI_CSC_D 0x04
# define CBBM_CBCTRL_113X_SPEAKER_EN 0x02
# define CBBM_CBCTRL_113X_INTR_DET 0x01
/* TI [14][245]xx */
# define CBBM_CBCTRL_12XX_RI_EN 0x80
# define CBBM_CBCTRL_12XX_ZV_EN 0x40
# define CBBM_CBCTRL_12XX_AUD2MUX 0x04
# define CBBM_CBCTRL_12XX_SPEAKER_EN 0x02
# define CBBM_CBCTRL_12XX_INTR_DET 0x01
#define CBBR_DEVCTRL 0x92 /* len=1 */
# define CBBM_DEVCTRL_INT_SERIAL 0x04
# define CBBM_DEVCTRL_INT_PCI 0x02
/* ToPIC 95 ONLY */
#define TOPIC95_SOCKETCTRL 0x90
# define TOPIC95_SOCKETCTRL_SCR_IRQSEL 0x00000001 /* PCI intr */
/* ToPIC 97, 100 */
#define TOPIC97_ZV_CONTROL 0x9c /* 1 byte */
# define TOPIC97_ZVC_ENABLE 0x1
/* TOPIC 95+ */
#define TOPIC_SLOTCTRL 0xa0 /* 1 byte */
# define TOPIC_SLOTCTRL_SLOTON 0x80
# define TOPIC_SLOTCTRL_SLOTEN 0x40
# define TOPIC_SLOTCTRL_ID_LOCK 0x20
# define TOPIC_SLOTCTRL_ID_WP 0x10
# define TOPIC_SLOTCTRL_PORT_MASK 0x0c
# define TOPIC_SLOTCTRL_PORT_SHIFT 2
# define TOPIC_SLOTCTRL_OSF_MASK 0x03
# define TOPIC_SLOTCTRL_OSF_SHIFT 0
/* TOPIC 95+ */
#define TOPIC_INTCTRL 0xa1 /* 1 byte */
# define TOPIC_INTCTRL_INTB 0x20
# define TOPIC_INTCTRL_INTA 0x10
# define TOPIC_INTCTRL_INT_MASK 0x30
/* The following bits may be for ToPIC 95 only */
# define TOPIC95_INTCTRL_CLOCK_MASK 0x0c
# define TOPIC95_INTCTRL_CLOCK_2 0x08 /* PCI Clk/2 */
# define TOPIC95_INTCTRL_CLOCK_1 0x04 /* PCI Clk */
# define TOPIC95_INTCTRL_CLOCK_0 0x00 /* no clock */
/* ToPIC97, 100 defines the following bits */
# define TOPIC97_INTCTRL_STSIRQNP 0x04
# define TOPIC97_INTCTRL_IRQNP 0x02
# define TOPIC97_INTCTRL_INTIRQSEL 0x01
/* TOPIC 95+ */
#define TOPIC_CDC 0xa3 /* 1 byte */
# define TOPIC_CDC_CARDBUS 0x80
# define TOPIC_CDC_VS1 0x04
# define TOPIC_CDC_VS2 0x02
# define TOPIC_CDC_SWDETECT 0x01
/* TOPIC97+? */
#define TOPIC_REG_CTRL 0xa4 /* 4 bytes */
# define TOPIC_REG_CTRL_RESUME_RESET 0x80000000
# define TOPIC_REG_CTRL_REMOVE_RESET 0x40000000
# define TOPIC97_REG_CTRL_CLKRUN_ENA 0x20000000
# define TOPIC97_REG_CTRL_TESTMODE 0x10000000
# define TOPIC97_REG_CTRL_IOPLUP 0x08000000
# define TOPIC_REG_CTRL_BUFOFF_PWROFF 0x02000000
# define TOPIC_REG_CTRL_BUFOFF_SIGOFF 0x01000000
# define TOPIC97_REG_CTRL_CB_DEV_MASK 0x0000f800
# define TOPIC97_REG_CTRL_CB_DEV_SHIFT 11
# define TOPIC97_REG_CTRL_RI_DISABLE 0x00000004
# define TOPIC97_REG_CTRL_CAUDIO_OFF 0x00000002
# define TOPIC_REG_CTRL_CAUDIO_INVERT 0x00000001
/* Socket definitions */
#define CBB_SOCKET_EVENT_CSTS 0x01 /* Card Status Change */
#define CBB_SOCKET_EVENT_CD1 0x02 /* Card Detect 1 */
#define CBB_SOCKET_EVENT_CD2 0x04 /* Card Detect 2 */
#define CBB_SOCKET_EVENT_CD 0x06 /* Card Detect all */
#define CBB_SOCKET_EVENT_POWER 0x08 /* Power Cycle */
#define CBB_SOCKET_EVENT_VALID_MASK 0x0f /* All socket events */
#define CBB_SOCKET_MASK_CSTS 0x01 /* Card Status Change */
#define CBB_SOCKET_MASK_CD 0x06 /* Card Detect */
#define CBB_SOCKET_MASK_POWER 0x08 /* Power Cycle */
#define CBB_SOCKET_MASK_ALL 0x0F /* all of the above */
#define CBB_STATE_CSTCHG (1UL << 0) /* Card Status Change */
#define CBB_STATE_CD1_CHANGE (1UL << 1) /* Card Detect 1 */
#define CBB_STATE_CD2_CHANGE (1UL << 2) /* Card Detect 2 */
#define CBB_STATE_CD (3UL << 1) /* Card Detect all */
#define CBB_STATE_POWER_CYCLE (1UL << 3) /* Power Cycle */
#define CBB_STATE_R2_CARD (1UL << 4) /* 16-bit Card */
#define CBB_STATE_CB_CARD (1UL << 5) /* Cardbus Card */
#define CBB_STATE_IREQ (1UL << 6) /* Ready */
#define CBB_STATE_NOT_A_CARD (1UL << 7) /* Unrecognized Card */
#define CBB_STATE_DATA_LOST (1UL << 8) /* Data Lost */
#define CBB_STATE_BAD_VCC_REQ (1UL << 9) /* Bad VccRequest */
#define CBB_STATE_5VCARD (1UL << 10) /* 5 V Card */
#define CBB_STATE_3VCARD (1UL << 11) /* 3.3 V Card */
#define CBB_STATE_XVCARD (1UL << 12) /* X.X V Card */
#define CBB_STATE_YVCARD (1UL << 13) /* Y.Y V Card */
#define CBB_STATE_5VSOCK (1UL << 28) /* 5 V Socket */
#define CBB_STATE_3VSOCK (1UL << 29) /* 3.3 V Socket */
#define CBB_STATE_XVSOCK (1UL << 30) /* X.X V Socket */
#define CBB_STATE_YVSOCK (1UL << 31) /* Y.Y V Socket */
#define CBB_SOCKET_CTRL_VPPMASK 0x07
#define CBB_SOCKET_CTRL_VPP_OFF 0x00
#define CBB_SOCKET_CTRL_VPP_12V 0x01
#define CBB_SOCKET_CTRL_VPP_5V 0x02
#define CBB_SOCKET_CTRL_VPP_3V 0x03
#define CBB_SOCKET_CTRL_VPP_XV 0x04
#define CBB_SOCKET_CTRL_VPP_YV 0x05
#define CBB_SOCKET_CTRL_VCCMASK 0x70
#define CBB_SOCKET_CTRL_VCC_OFF 0x00
#define CBB_SOCKET_CTRL_VCC_5V 0x20
#define CBB_SOCKET_CTRL_VCC_3V 0x30
#define CBB_SOCKET_CTRL_VCC_XV 0x40
#define CBB_SOCKET_CTRL_VCC_YV 0x50
#define CBB_SOCKET_CTRL_STOPCLK 0x80
#define CBB_FORCE_CV_TEST (1UL << 14)
#define CBB_FORCE_3VCARD (1UL << 11)
#define CBB_FORCE_5VCARD (1UL << 10)
#define CBB_FORCE_BAD_VCC_REQ (1UL << 9)
#define CBB_FORCE_DATA_LOST (1UL << 8)
#define CBB_FORCE_NOT_A_CARD (1UL << 7)
#define CBB_FORCE_CB_CARD (1UL << 5)
#define CBB_FORCE_R2_CARD (1UL << 4)
#define CBB_FORCE_POWER_CYCLE (1UL << 3)
#define CBB_FORCE_CD2_CHANGE (1UL << 2)
#define CBB_FORCE_CD1_CHANGE (1UL << 1)
#define CBB_FORCE_CSTCHG (1UL << 0)
#include <dev/pccbb/pccbbdevid.h>
#define CBB_SOCKET_EVENT 0x00
#define CBB_SOCKET_MASK 0x04
#define CBB_SOCKET_STATE 0x08
#define CBB_SOCKET_FORCE 0x0c
#define CBB_SOCKET_CONTROL 0x10
#define CBB_SOCKET_POWER 0x14
#define CBB_EXCA_OFFSET 0x800 /* offset for exca regs */